Cannot undo or re apply Lag fix - Vibrant General

Last week I applied the ryanza one click lag fix and it worked well until I installed the update....my phone started to slow down again so I decided to re apply it...but now it won't let me remove the lagfix...but it says there is no lagfix installed...can anyone help me figure this out?

Simply go the the "available" section in the OCLF program and you should see the option to undo the lag fix for the version you have. For some reason, the main screen only shown the option to undo the newest version of the lagfix, which indicate that undo is not available if you have an older version of the lag fix.

The undo option is unavailable...so I can't undo it

Click restore boot animation then give it a try
Sent from my SGH-T959 using XDA App

Most likely your battery level is to low. If you click on the undo option it will tell you if your batterly level is to low. Needs over 40% I believe.
Sent from my SGH-T959 using XDA App

The problem is with the playlogo1 file after the factory reset . Click Restore Boot Animation then uninstall lagfix and reinstall lagfix .

Same Here.
Installed JI5 and rooted with OCLF
LagFix V2.1+ and Undo are both red and unavailable.
Same for V1+
Restore boot animation & un/reinstall OCLF did not change it.
If I try to click OneClickLagFix V2.1+ is says not enough free space in /data and to free up space.
But I have plenty of free space on phone and SD

These are the step that worked for me . If this doesn't work I would try to contact the dev.
1. Click restore boot animation
2. Reboot
3. Undo lagfix (not uninstall oclf)
4. Reboot
5. Install lagfix
I dont know if the reboots are necessary but its what worked for me.
Sent from my SGH-T959 using XDA App

As fearless said: The undo option is unavailable...so I can't undo it
Same for me. Can't undo since the undo option is red and unavailable.
But also cant run the lagfix because that option is also red and unavailable.

so is there a Senior Member who can shed any light on this issue?

Are you sure that the lagfix is still there? When you mean "update," what kind of update did you do?
Get Quadrant Benchmark from the market and run it. What is your score? Is it averaging around ~800 or ~2000+?
Check your SD card for apps. What is the size?
.. This is why RyanZA's OCLF isn't good, it possibly corrupts data and I'm not a fan of one click because it was very easy to do in the first place and I would rather feel more confident in manually doing it.

Ok....there was an update to the OCLF in the market and i downloaded and installed it.....the only major thing i've done to it after that is flashed to I9000 boot animation....heres a list of everything thats listed as UNAVAILABLE in the main screen:
Root Device 2.1
Install EXT2 Tools
OneClickLagFix V2.1+
Undo OneCLickLagFix V2+
Install Font
Repair/Clean LagFix
OneClickLagFix V1+
Undo OneClickLagFix V1+
If i try to re-apply the LagFix it tell me theres not enough space in /data...but if i try to undo it says it does not appear to be one installed(playlogos1 greater than 5kb)....i just want my vibrant to be fast....can u help me?

Answer the questions I listed above. I don't use OCLF and I don't like One-Clicks unless its a vital step like rooting but rooting for the Vibrant is just so simple its not worth one clicking.

Sorry...the Quadrant Benchmark is 890
My SD card has 12.53 GB free

fearless1964 said:
Sorry...the Quadrant Benchmark is 890
My SD card has 12.53 GB free
Click to expand...
Click to collapse
Looks like your lagfix isn't there. When I meant sd card I meant to the bottom: Application Storage. With RyanZA if its applied, it should be <800 MB; otherwise it will be 1.5GB+ (results may vary based on the amount of apps you have installed)
With RyanZA fully working, it should be giving you benchmarks of 2000+ but these benchmarks don't actually reflect on the phone's performance and doesn't mean anything. The only known lagfix that works (in my own opinion) is VooDoo. Easily able to remove as well.
What kind of ROM are you running? I would go into Clockwork Recovery and attempt a nandroid backup, if the lagfix is there then the backup will take forever. If not, it should be completed within 2-4 minutes whereas if lagfix is present, nandroid will back up that as well.

zephiK said:
Looks like your lagfix isn't there. When I meant sd card I meant to the bottom: Application Storage. With RyanZA if its applied, it should be <800 MB; otherwise it will be 1.5GB+ (results may vary based on the amount of apps you have installed)
With RyanZA fully working, it should be giving you benchmarks of 2000+ but these benchmarks don't actually reflect on the phone's performance and doesn't mean anything. The only known lagfix that works (in my own opinion) is VooDoo. Easily able to remove as well.
What kind of ROM are you running? I would go into Clockwork Recovery and attempt a nandroid backup, if the lagfix is there then the backup will take forever. If not, it should be completed within 2-4 minutes whereas if lagfix is present, nandroid will back up that as well.
Click to expand...
Click to collapse
the ROM is stock.....but i'll try the VooDoo lagfix....can u give me a link?

fearless1964 said:
sorry....im stilll tryin to get used to Android....so since you say my lagfix is not there....what kind of lagfix do you recommend?
Click to expand...
Click to collapse
Voodoo lagfix, it goes VERY well with the OC/UV kernel for improved battery life. What is your application storage size as of right now? I would believe that the lagfix is not present anymore. OCLF should be giving you 2000+ benchmark results if its properly working. Getting a score of ~800 is no-lagfix and is the score for stock Vibrant without any of those tweaks.

zephiK said:
Voodoo lagfix, it goes VERY well with the OC/UV kernel for improved battery life. What is your application storage size as of right now? I would believe that the lagfix is not present anymore. OCLF should be giving you 2000+ benchmark results if its properly working. Getting a score of ~800 is no-lagfix and is the score for stock Vibrant without any of those tweaks.
Click to expand...
Click to collapse
cool ill try VooDoo......and the app storage available space is 835MB

fearless1964 said:
cool ill try VooDoo......and the app storage available space is 835MB
Click to expand...
Click to collapse
Hmph, do you have a lot of applications installed? The lagfix could possibly be present but not properly working. What I would personally do is
A) Backup your applications using Titanium Backup
B) Flash a new ROM (Check Dev section and find something that you'd like)
C) Check application storage; everything should be good
--- if not then, Odin back to stock and re-partition using Odin (search on XDA for the tools) then flash ROM, etc.
(or vice versa)
I'm off to get some sleep.. I hope this helps.
What the 'OCLF' does is create a virtual ext2 partition using your application storage so it significantly lowers the amount of space in your application storage. Voodoo does the same but it is not as significant + it is in a ext4 format and blah blah blah.. its basically more safe and doesnt corrupt data.

zephiK said:
Hmph, do you have a lot of applications installed? The lagfix could possibly be present but not properly working. What I would personally do is
A) Backup your applications using Titanium Backup
B) Flash a new ROM (Check Dev section and find something that you'd like)
C) Check application storage; everything should be good
--- if not then, Odin back to stock and re-partition using Odin (search on XDA for the tools) then flash ROM, etc.
(or vice versa)
I'm off to get some sleep.. I hope this helps.
What the 'OCLF' does is create a virtual ext2 partition using your application storage so it significantly lowers the amount of space in your application storage. Voodoo does the same but it is not as significant + it is in a ext4 format and blah blah blah.. its basically more safe and doesnt corrupt data.
Click to expand...
Click to collapse
thanks...i'll try this in the morning....will post back with results

Related

JK6: No OCLF due to \system\lib full

Hi - I've upgraded to stock Froyo (re-rooted afterward, no worries) and couldn't re-run OCLF. It told me that it couldn't install 'EXT2 Tools' as \system\lib is full. So I downloaded root explorer as I thought I had to re-mount the directory. I opened that, went to the right folder and changed the little button to 'rw'..... no difference.
What am I missing??
Thanks.
Any thoughts would be much appreciated - I also mounted as r/w with SGS Tools with no impact. I don't know if that's the issue stopping me from using One Click Lag Fix, but maybe.
I have no problems running OCLF and I'm running stock froyo rom. Try again!
Sent from my SGH-T959 using XDA App
Uninstall EXT.2 tools,
Uninstall OCLF,
Stay ROOTED!
download MacnutR14
DO NOT OPEN ZIP use astro or andexplorer copy from downloads folder go back to sd & paste there. Now backup all your apps, contacts,data whateva.. Using titanium,
Go into recovery mode how every u do go to install zip from sd, pick zip from sd, Go down to Macnut14, Go down to yes
Your now flashing the hottest rom you've every seen
When its done reboot system now
It will restart in less than five minutes leave it alone untill goes through the scanning sd & all that. The titanium get all your apps and stuff back.
Now flash the SUPER IO KERNEL the exact same way move zip file, to sd. when flashing don't pick update pick zip from sd & do the same as before
Reboot system now
Ok now download RyanZA's one click lagfix from market install EXT.2 TOOLS
install v.2 lagfix restart your done
Your now hitting 1800's Quadrant score not bad with the hottest smoothest fastest phone. All from the phone no pc needed
It took me days of reading threads to gather this info you just received in minutes JUST THANK THE MAKERS OF THESE GREAT ROMS & MODS
vibrant rooted
macnutR14
super io kernel
RyanZA's lagfix
QS 1889
2.2 froyo
Mine said it could not installl the lagfix because data/ was full. I just went there and delted the OCLF and EXT2 folders.... went back to the app and it worked then.
Awesome, thanks guys. Looks like I have a little project for the w/e but I'm confident with these tips I will sort it.
Thank f%%% for this forum.
Oh, the best tip was ' try again'. Super. I guess they are everywhere.
Sent from my SGH-T959 using XDA App

[ROM][2.1] Eclair Strikes Back v2 [2011.06.23]

Since there's been some interest in comparing the 2.2 ROMs with the 2.1, here are some stock eclair nandroid images based on the Cincinnati Bell 2.1 ROM that can be used in OpenRecovery without flashing SBFs. You can use these to switch between 2.1 and other 2.2 ROMs without bothering with RSD Lite/sbf_flash.
Of course gallery key, camera and FM radio work well on these. Although, I've been having market problems (paid apps fail to download). Hopefully that will resolve itself if/when market decides to self-update... In the interim, I recommend using something like Titanium Backup to migrate your paid apps.
Eclair Strikes Back v2 (2011.06.23)
This is a tweaked version of CBW_eclair_STR_U2_04_1E_1.zip with some tricks we've been using in 2.2 (expanded apns-conf.xml, JIT from FrozenEclair, memhack to move dalvik-cache to /cache, egl.cfg hack to disable software rendering).
eclair-strikes-back-v2-beta.zip (the beta is now final )
Changes since v1:
ext-partition support compatible with the stock221-derived ROMs*
Automatic swap support for fjfalcon's fastboot kernel
Automatic support for link2sd (either FAT extra partition or stock221's /sd-ext/link2sd method)
Additional cpu governors (conservative, interactive)
Market upgraded to 2.2.7
*dalvik-cache on /sd-ext is not supported by default on this ROM.
Previous release: Eclair Strikes Back v1
eclair-strikes-back.zip
2011-06-16 Update to fix market on ESB v1 (upgrades market to 2.2.7)
Stock 2.1 (Cincinnati Bell)
This is a rooted version of Cincinnati Bell's STR_U2_04.1E.1 with OpenRecovery support pre-installed.
CBW_eclair_STR_U2_04_1E_1.zip
Hey Mioze do you have the app2ext script that is in the Bluesteel rom? Might try your eclair nands with it and see what i get.
I've finally successfully downloaded and installed a paid app from the market now on Eclair Strikes Back. Market is still old one though... not sure why it's taking so long to update to new one. When I did a factory reset on stock 2.1 soon after I bought the phone the market updated itself pretty quickly IIRC.
Still, this feels so smooth and fast....
EDIT:
And don't seem to be having downloading issues with any apps, be it paid or free anymore. Maybe you'll have to manually replace the market.apk with the new one though, since I'm not sure it's ever going to self-update.
syrenz said:
I've finally successfully downloaded and installed a paid app from the market now on Eclair Strikes Back. Market is still old one though... not sure why it's taking so long to update to new one. When I did a factory reset on stock 2.1 soon after I bought the phone the market updated itself pretty quickly IIRC.
Still, this feels so smooth and fast....
EDIT:
And don't seem to be having downloading issues with any apps, be it paid or free anymore. Maybe you'll have to manually replace the market.apk with the new one though, since I'm not sure it's ever going to self-update.
Click to expand...
Click to collapse
And what about moving applications to the sd? available or will be applied app2sd?. Open recovery will still work? I have some applications that are supported only from 2.2, they can no longer be installed .... of course there will have to sacrifice something.
I at the continuing problems of delay in opening and closing apps, malfunction of the camera, out of trouble and delay an application to load the launcher and would return to around 2.1, but I also like the space for application installation and open recovery.
PS: It's easy to return to 2.1?
download on process
kinda miss the haptic feedback hahaha..
thx a lot Mioze..
I'm pretty sure you can only move apps to SD for 2.2... since I never used it (I never have so many apps installed at once that it's neccesary) I don't mind losing that functionality.
There are a few apps from 2.2 that I like, most notably the new gmail and youtube apps, but those are minor sacrifices for me really.
Open recovery is installed in both those links. I find the camera works much better on 2.1, seems much faster in taking and processing pictures.
In any case, it is indeed very easy to return to 2.1 and then return back to a 2.2 ROM if you don't like it. You take one of those links (I'm using eclair strikes back) and flash it through nandroid just as you would any other ROM that we have here. And you can flash back the same way if you don't like it.
Be advised, there are currently some issues around the android market for some reason (just see the posts above)... I'm thinking we might have to replace the market apk.
Anyways, I personally am loving it.
EDIT:
Oh, you might have to setup the APN's as well.
Tavinsky said:
And what about moving applications to the sd? available or will be applied app2sd?. Open recovery will still work? I have some applications that are supported only from 2.2, they can no longer be installed .... of course there will have to sacrifice something.
I at the continuing problems of delay in opening and closing apps, malfunction of the camera, out of trouble and delay an application to load the launcher and would return to around 2.1, but I also like the space for application installation and open recovery.
PS: It's easy to return to 2.1?
Click to expand...
Click to collapse
I intend to make an updated eclair-strikes-back to add app2ext support and additional governors but I probably won't have time until later in the week. I view link2sd as the eclair equivalent of froyo's native app2sd, though. Link2sd may already work with fat as the second partition, but I haven't tested it yet because of the market problem. The market problem is #1 on my list when I get time.
And yes, these 2.1 ROMs will keep OpenRecovery intact and you can just flash between 2.1 and 2.2 ROMs the same way you would switch between 2.2 ROMs.
Thanks for the work Mioze7Ae! Let's try it, you know, always gives a bit of fear making a mistake, but gradually removes the fear. I do not know that flashing. It's like applying an Update? I apply a copy nandroid?
Tavinsky said:
Thanks for the work Mioze7Ae! Let's try it, you know, always gives a bit of fear making a mistake, but gradually removes the fear. I do not know that flashing. It's like applying an Update? I apply a copy nandroid?
Click to expand...
Click to collapse
I know how you feel. I always used to have fear/apprehension when flashing a ROM. I've done it enough times now that it's all gone by now though.
Anyways:
Download the ROM. Unzip it. Copy and paste the folder (should contain 4 things in it boot.img etc...) into your SD card under OpenRecovery/Nandroid/ (if you've gone to a 2.2 ROM you should see that ROM in the same place where you're putting this). Anyways, launch open recovery and do recovery boot or hold volume up while pressing power on (if your phone is off). If you get an image and nothing happens, you may have to go into open recovery and select install recovery system before doing this - if you have a bunch of weird pictures in your gallery including Darth Maul then you don't have to worry about this. Then navigate - using the volume keys to move up and down and the camera button to select - to Nandroid, select restore, select Eclair strikes back, select restore all. Once that's done, make sure to wipe data/factory reset and then wipe/clear dalvik cache and cache. Then reboot and it should work. (First reboots are long).
You may have to setup your APN's also.
Excellent. Thanks, sounds simple ... downloading ..... then tell how it worked.
syrenz said:
it boot.img etc...) into your SD card under OpenRecovery/Nandroid/ (if you've
Click to expand...
Click to collapse
They actually go in nandroid/openrecovery/, it's the updates.zip that go in OpenRecovery/updates/ so it's easy to remember that wrong. I'm always adb push'ing to them so I only noticed the mistake because I've got the muscle memory from typing them all the time. Gotta love the consistency
hey mioze7ae, using it right now btw, is it possible to change the read_ahead settings to 2048 instead of 128? i can manually replace the file but once reboot, it changes back.
thanks!
Manual market update
I replaced /system/app/Vending.apk with the 2.2.7 com.android.vending.apk found here:
http://forum.xda-developers.com/showthread.php?t=875067
After doing this and rebuilding dalvik-cache I have the new market and I am able to install paid apps! I'll make an update for it tomorrow, I have to crash.
Two things you can get from market before you flash. APN backup/ restore and SD speed Increase. You can backup your APNs and then once you get to the eclairs, restore them. SD Speed Increase will kick up your SD cache to 2048, instead of 128. Both are free.
Woodrube said:
Two things you can get from market before you flash. APN backup/ restore
Click to expand...
Click to collapse
Much appreciated... Didn't know there was such an app and it's a pain to re-enter all that stuff...
syrenz said:
I know how you feel. I always used to have fear/apprehension when flashing a ROM. I've done it enough times now that it's all gone by now though.
Anyways:
Download the ROM. Unzip it. Copy and paste the folder (should contain 4 things in it boot.img etc...) into your SD card under OpenRecovery/Nandroid/ (if you've gone to a 2.2 ROM you should see that ROM in the same place where you're putting this). Anyways, launch open recovery and do recovery boot or hold volume up while pressing power on (if your phone is off). If you get an image and nothing happens, you may have to go into open recovery and select install recovery system before doing this - if you have a bunch of weird pictures in your gallery including Darth Maul then you don't have to worry about this. Then navigate - using the volume keys to move up and down and the camera button to select - to Nandroid, select restore, select Eclair strikes back, select restore all. Once that's done, make sure to wipe data/factory reset and then wipe/clear dalvik cache and cache. Then reboot and it should work. (First reboots are long).
You may have to setup your APN's also.
Click to expand...
Click to collapse
I just want to check; is it completely safe to remove those wierd pics in the gallery?
androidlover123 said:
I just want to check; is it completely safe to remove those wierd pics in the gallery?
Click to expand...
Click to collapse
Yes. But if you have to use open recovery for whatever reason, you'll need them. You can either click install recovery as needed (which creates the pics) and delete them after, or the best thing to do is get an app that just hides the pics from gallery - so they are there when you need them, but don't interfere. I saw an app "Gallery Excluder" or something floating around in the XDA Android Apps section - that would work. Or a gallery like QuickPic let's you hide things as well.
EDIT:
Nevermind, Gallery Excluder hides folders only. There are other apps though, I believe.
Just an update on progress with ESB
I've done some testing and Link2SD already works with the released eclair-strikes-back but currently only when using FAT for the second partition.
To get ext support in, I'm trying to get the darktremor a2sd scripts to work. They look high quality and robust and should handle swap gracefully when booting the custom kernel as well (current status--some rare hung boots with a flaky SD card when using the latest beta scripts, will try the stable release next). There's also a GUI in the market for managing the SD card (currently only Froyo+, I'm inquiring whether the developer can add eclair support).
Mioze7Ae said:
Just an update on progress with ESB
I've done some testing and Link2SD already works with the released eclair-strikes-back but currently only when using FAT for the second partition.
To get ext support in, I'm trying to get the darktremor a2sd scripts to work. They look high quality and robust and should handle swap gracefully when booting the custom kernel as well (current status--some rare hung boots with a flaky SD card when using the latest beta scripts, will try the stable release next). There's also a GUI in the market for managing the SD card (currently only Froyo+, I'm inquiring whether the developer can add eclair support).
Click to expand...
Click to collapse
I am hoping that the ext will come through. If I am using the sd-ext/app folder on the Steelblue ROM, can I leave all my apps in there and flash your eclair with ext support (when ready) or will I have to use Titanium-migrate? I would think that it really wouldn't matter for most of the apps, except FroYo specific ones like Flash 10.3 but not sure.
p.s. Are you going to call your next version "Return of the Eclair"?
MD5 Check failed. Does this have something to do with the fact that I bought my phone in the middle east?

Market problems

Many times, when i try to download an app, the market says that i don't have space for it, and of course i have. I tried to move apps to the SD, and it still happens. I rolled back to the old market and it says that the download failed.
I can only solve it with a reboot, when i reboot, i can download lots of apps with no problem, but after some time, the error comes back and i've to reboot again
i've tried uninstalling updates, cleaning market data, etc...
I've clean JVT with semaphore kernel
how can i solve it and why this happens? it also happen with you?
And i've another question, why the market says that apps like nfl rivals are not compatible with my phone when they are? it also says that most of gameloft games are not compatible my GT-i9000
Might be a problem with a ext4 partition, this has happend to me when on voodoo lagfix and then installed another rom non-lagfixed.
Try to reinstall your rom using repartition with 512.pit file, this should help.
You should always remove any lagfixes before changing roms unless instructed otherwise.
About games compatibility... I really don't know, maybe is part of the same problem.
gtluis said:
Might be a problem with a ext4 partition, this has happend to me when on voodoo lagfix and then installed another rom non-lagfixed.
Click to expand...
Click to collapse
No, this is a market problem. It writes the downloaded files to /cache/ and sometimes does not delete old files, so there is no more space in that filesystem. Also if a apk is bigger than the size of /cache/ (~30M) it fails to install.
See also: http://forum.xda-developers.com/showthread.php?t=1243170
elhennig said:
No, this is a market problem. It writes the downloaded files to /cache/ and sometimes does not delete old files, so there is no more space in that filesystem. Also if a apk is bigger than the size of /cache/ (~30M) it fails to install.
See also: http://forum.xda-developers.com/showthread.php?t=1243170
Click to expand...
Click to collapse
so, that happens because /cache gets full, and when i reboot, the phone cleans it?
it also happens with the old market 2.XX
is there any way to fix that?
The game compatibility issue seems to happen because something is wrong with build.prop . In cyanogen happened something like this, so i changed a few lines of the build.prop to make market think that my phone is a nexus S and it worked.
lpalvaro said:
so, that happens because /cache gets full, and when i reboot, the phone cleans it?
it also happens with the old market 2.XX
is there any way to fix that?
The game compatibility issue seems to happen because something is wrong with build.prop . In cyanogen happened something like this, so i changed a few lines of the build.prop to make market think that my phone is a nexus S and it worked.
Click to expand...
Click to collapse
You can enable 50mb virtual cash in Semaphore script manager. That should fix it.
McDown said:
You can enable 50mb virtual cash in Semaphore script manager. That should fix it.
Click to expand...
Click to collapse
ok, i'll do it

[Q] Rooted CM7, no market Missing Apk(s)

Hi.
My nook color was on 1.4 (latest bn update), I dual boot it with cm7 following this set of instructions - youtube.com/watch?v=OxDEZ1Fc6iE
when started, the android guy didn't appear and it didn't ask to log in to my google account. in the menu, there's no market.
went to settings - manage applications - there's no google service framework nor market.
I then rooted it instead with cm7 again following - youtube.com/watch?v=lmmmm8cBpe0
same thing, no google service framework, no market.
I've dual booted, rooted, unrooted to 1.0, rooted, over and over again but no luck. I doubt there's something wrong with the files, is it not reading/installing it properly? I downloaded the files through the right links multiple times.
since then, I tried all sorts of ways to try to download the apps but nothing works as well. I also tried installing the files individually (google service framework, onetimeinitializer, setupwizard, talk, vending) but it keeps saying "Application not installed."
Once I did manage to download market, but when I open it, it just gets out and crashes.
Is there another way to root it with a sure way of having market on it? or what am I doing wrong?
Please help. ): I'm not an expert with all these things so if you could explain it in simple terms.
So are you running from an SD card? Did you download gapps.zip and put it on the boot partition?
Sent from space
yes, I rooted from an sdcard. I followed the exact instructions on the video - (youtube.com/watch?v=lmmmm8cBpe0) Is something missing? Am I suppose to partition the sd? By my understanding, partition is something like splitting the memory on the sd? is it?
Sorry, I'm a real beginner on this.
Well the video you followed on Failtube has you installing to your internal memory. Did you flash the google apps zip while in clockwork?
Sent from space
messengerback said:
Hi.
My nook color was on 1.4 (latest bn update), I dual boot it with cm7 following this set of instructions - youtube.com/watch?v=OxDEZ1Fc6iE
when started, the android guy didn't appear and it didn't ask to log in to my google account. in the menu, there's no market.
went to settings - manage applications - there's no google service framework nor market.
I then rooted it instead with cm7 again following - youtube.com/watch?v=lmmmm8cBpe0
same thing, no google service framework, no market.
I've dual booted, rooted, unrooted to 1.0, rooted, over and over again but no luck. I doubt there's something wrong with the files, is it not reading/installing it properly? I downloaded the files through the right links multiple times.
since then, I tried all sorts of ways to try to download the apps but nothing works as well. I also tried installing the files individually (google service framework, onetimeinitializer, setupwizard, talk, vending) but it keeps saying "Application not installed."
Once I did manage to download market, but when I open it, it just gets out and crashes.
Is there another way to root it with a sure way of having market on it? or what am I doing wrong?
Please help. ): I'm not an expert with all these things so if you could explain it in simple terms.
Click to expand...
Click to collapse
My connection is horrible for video right now so please forgive me for not watching the video... did you include the latest GApps.zip and install that too?
Put the latest GApps*.zip on a sd card and install using ROM Manager.
koopakid08 said:
Well the video you followed on Failtube has you installing to your internal memory. Did you flash the google apps zip while in clockwork?
Sent from space
Click to expand...
Click to collapse
sorry, am I not suppose to install it to internal memory? I don't really get it. I flashed CM7 zip then the gapps.
vessamj said:
My connection is horrible for video right now so please forgive me for not watching the video... did you include the latest GApps.zip and install that too?
Click to expand...
Click to collapse
yup, I did.
hwong96 said:
Put the latest GApps*.zip on a sd card and install using ROM Manager.
Click to expand...
Click to collapse
yup I tried doing that too. the files still didn't appear.
Okay, I managed to install CM7 and market! I followed eyeballer's guide at forum.xda-developers.com/showthread.php?t=1030227&fb_source=message through Koopakid08's link on his/her signature.
There was market on it and it opens. but doesn't start dowloads. I did the usual of delete the caches, reboot and now, it downloads fine.
I then overclocked it with www.youtube.com/watch?v=8mvwmx9qSZY guidance. not much of a guide but i managed to find the files and installed. but it overclocked to 1.1ghz, not 1.3. I don't really mind, but just wondering what I did wrong.. I'm thinking of trying it again but using the latest phiremod 7.1. I used the old 6.1 yesterday instead because I wasn't very sure.
So, now my question would be do I have to revert it back to cm7 then overclock it again? or can I just do it over what I've already done? or must I start from scratch, unroot, root to cm7 then overclock?
messengerback said:
sorry, am I not suppose to install it to internal memory? I don't really get it. I flashed CM7 zip then the gapps.
yup, I did.
yup I tried doing that too. the files still didn't appear.
Okay, I managed to install CM7 and market! I followed eyeballer's guide at forum.xda-developers.com/showthread.php?t=1030227&fb_source=message through Koopakid08's link on his/her signature.
There was market on it and it opens. but doesn't start dowloads. I did the usual of delete the caches, reboot and now, it downloads fine.
I then overclocked it with www.youtube.com/watch?v=8mvwmx9qSZY guidance. not much of a guide but i managed to find the files and installed. but it overclocked to 1.1ghz, not 1.3. I don't really mind, but just wondering what I did wrong.. I'm thinking of trying it again but using the latest phiremod 7.1. I used the old 6.1 yesterday instead because I wasn't very sure.
So, now my question would be do I have to revert it back to cm7 then overclock it again? or can I just do it over what I've already done? or must I start from scratch, unroot, root to cm7 then overclock?
Click to expand...
Click to collapse
You can just install it as an update using ROM Manager and not lose any data. Just make sure the only boxes checked when you update are wipe dalvik cache and backup.
Sent from space
koopakid08 said:
You can just install it as an update using ROM Manager and not lose any data. Just make sure the only boxes checked when you update are wipe dalvik cache and backup.
Sent from space
Click to expand...
Click to collapse
I was about to update it, but now, my google account keeps saying my password is wrong, and I can't sign in. What can I do now? I tried updating the rom from rom manager but it says there's no updates available.
if I were to do it through recovery, I need to burn the clockwork on the sd, put the files in, and just install zip? or do i need to format system and data first?
messengerback said:
I was about to update it, but now, my google account keeps saying my password is wrong, and I can't sign in. What can I do now? I tried updating the rom from rom manager but it says there's no updates available.
if I were to do it through recovery, I need to burn the clockwork on the sd, put the files in, and just install zip? or do i need to format system and data first?
Click to expand...
Click to collapse
Go to download a rom to choose the rom you want.
You should install clockwork to your internal memory using rom manager and then you won't have to fool around with SD cards. If you want to update manualy through recovery then you need to wipe dalvik cache and then use the install a zip option. To boot into recovery hold volume up on boot.
Sent from my NookColor using Tapatalk
koopakid08 said:
Go to download a rom to choose the rom you want.
You should install clockwork to your internal memory using rom manager and then you won't have to fool around with SD cards. If you want to update manualy through recovery then you need to wipe dalvik cache and then use the install a zip option. To boot into recovery hold volume up on boot.
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
I went - Rom manager - Download ROM - Error occured while processing the ROM list/Error occured while Developing Download list
How do I continue? ):
If I do update it manually through recovery, I need to install the phiremod v7.1, do I need to install gapps_phiremod_7.1 as well? the instructions are gone since phiredrop deleted his website. I can't find any other instructions for updating from 6.1 to 7.1
I still can't sign into my google account, keeps saying my password is incorrect. Any way to fix this?
"install clockwork to your internal memory using rom manager and then you won't have to fool around with SD cards."
so thats how it works. hahaha, that'll be great and less of a hassle for me. I've been repeating the burn clockwork, install, flash all sorts of roms too many times.
messengerback said:
I went - Rom manager - Download ROM - Error occured while processing the ROM list/Error occured while Developing Download list
How do I continue? ):
If I do update it manually through recovery, I need to install the phiremod v7.1, do I need to install gapps_phiremod_7.1 as well? the instructions are gone since phiredrop deleted his website. I can't find any other instructions for updating from 6.1 to 7.1
I still can't sign into my google account, keeps saying my password is incorrect. Any way to fix this?
"install clockwork to your internal memory using rom manager and then you won't have to fool around with SD cards."
so thats how it works. hahaha, that'll be great and less of a hassle for me. I've been repeating the burn clockwork, install, flash all sorts of roms too many times.
Click to expand...
Click to collapse
1. Try pressing menu- clear download cache and see if that changes anything.
2. Yes you should flash gapps again seeing how you are having problems with your google account.
3. I've never used phiremod so I am not sure if that is a problem. I would suggest that you go with just virgin CM7.1 but I'm sure phiremod will be fine too.
Sent from space
koopakid08 said:
1. Try pressing menu- clear download cache and see if that changes anything.
2. Yes you should flash gapps again seeing how you are having problems with your google account.
3. I've never used phiremod so I am not sure if that is a problem. I would suggest that you go with just virgin CM7.1 but I'm sure phiremod will be fine too.
Sent from space
Click to expand...
Click to collapse
cleared download cache, didn't work. ): how do I revert back to cm7?
I found out the problem to my google account. turns out, my account was freezed by gmail because of suspicious activities. so, I changed my password and it all works again. yay!
update: OH!! after I signed into the google account, I can go into download roms! double yay! I'm downloading it right now, will see if it works once done! question, would I still need to download gapps again?
Not if they are all working fine.
Sent from space
Okay, after all the trial and errors, my nook color is finally up and running awesomely on cm7,phiremod 7.1 at 1.2ghz.
Went to rom manager - download rom - phiremod - v7.1 - reboot after that, I had to do gapps again because some files like market wasn't in the menu, but on the homepage. rom manager - download rom - phiremod - gapps - reboot.
so everything is working well so far.
thanks to all the help I received, especially koopakid08!
If you want to easily overclock your nook to the Max, along with adjusting voltage to handle it and adjusting speaker gain and other stuff, look up Nook Tweaks (icon is a nook outline with gears inside). The process is very simple, just make sure you install it to the device not SD (I made that mistake), because otherwise it won't set the CPU speed and voltage settings on boot (even with the boxes checked). I am able to get my nook running smoothly at 1300MHz, but the option goes up to 1600. So wherever your nook's Max is can be found with this app. No need to readjust your kernel, just install the app and go. If you want to make sure that it is working on boot, download autostarts, which shows what starts during boot.
-XDA Premium on CM7 Nook Color
vessamj said:
If you want to easily overclock your nook to the Max, along with adjusting voltage to handle it and adjusting speaker gain and other stuff, look up Nook Tweaks (icon is a nook outline with gears inside). The process is very simple, just make sure you install it to the device not SD (I made that mistake), because otherwise it won't set the CPU speed and voltage settings on boot (even with the boxes checked). I am able to get my nook running smoothly at 1300MHz, but the option goes up to 1600. So wherever your nook's Max is can be found with this app. No need to readjust your kernel, just install the app and go. If you want to make sure that it is working on boot, download autostarts, which shows what starts during boot.
-XDA Premium on CM7 Nook Color
Click to expand...
Click to collapse
True but you will not gain any performance by going over 1.2, only worse battery life and the chance of overheating.
Sent from space
Well I certainly don't think I know any better than anyone else, its just that I recorded a pretty decent increase from 1.2 to 1.3 when I ran a benchmark using Quadrant Standard. That's the only basis I currently have, but I figured since Quadrant Standard got good reviews that it was creditable... do you know of a better benchmark?
-XDA Premium on CM7 Nook Color
vessamj said:
If you want to easily overclock your nook to the Max, along with adjusting voltage to handle it and adjusting speaker gain and other stuff, look up Nook Tweaks (icon is a nook outline with gears inside). The process is very simple, just make sure you install it to the device not SD (I made that mistake), because otherwise it won't set the CPU speed and voltage settings on boot (even with the boxes checked). I am able to get my nook running smoothly at 1300MHz, but the option goes up to 1600. So wherever your nook's Max is can be found with this app. No need to readjust your kernel, just install the app and go. If you want to make sure that it is working on boot, download autostarts, which shows what starts during boot.
-XDA Premium on CM7 Nook Color
Click to expand...
Click to collapse
Oh, sounds great but I think I'll keep it at 1.3 rather than 1.6, I don't want it to overheat it or something. I've already downloaded the app and tried to change it to 1.3, but what is the CPU stepping 1,2,3,4,5? I changed it to 800, 900, 1000, 1200 and 1300. Is that okay?

[Q] S4 Performance?

I've been wondering something.
Ive been a android fan for awhile, and previous phones have had less than desirable space left for apps. so ive always used link2sd with great effect.
What I am wondering now is (because I now have plenty internal storage on my s4) is, would I gain any performance boost by continuing to utilize link2sd for my apps?
Or would I benefit more by not bothering? Are there any benchmarks to support yay or nay?
My cards a class10 32g card... and I know the s4 supports ext4.
Posted from my I337 NB1 Dark Venom 3 SS version --- 20G Free Cloud --- https://copy.com?r=vtiraF
kevp75 said:
I've been wondering something.
Ive been a android fan for awhile, and previous phones have had less than desirable space left for apps. so ive always used link2sd with great effect.
What I am wondering now is (because I now have plenty internal storage on my s4) is, would I gain any performance boost by continuing to utilize link2sd for my apps?
Or would I benefit more by not bothering? Are there any benchmarks to support yay or nay?
My cards a class10 32g card... and I know the s4 supports ext4.
Posted from my I337 NB1 Dark Venom 3 SS version --- 20G Free Cloud --- https://copy.com?r=vtiraF
Click to expand...
Click to collapse
As far as performance goes by using link2sd... maybe a little during app loading, but not enough to notice. Are you rooted? The best app i have ever seen period for performance adjusting is Android Tuner. The paid version offers just about every possible tool to adjust every possible aspect of the rom. You should at least give it a glance. I boosted the crap out of my phone with that app alone.
Good benchmarking app is "AnTuTu"
megamanDJ said:
As far as performance goes by using link2sd... maybe a little during app loading, but not enough to notice. Are you rooted? The best app i have ever seen period for performance adjusting is Android Tuner. The paid version offers just about every possible tool to adjust every possible aspect of the rom. You should at least give it a glance. I boosted the crap out of my phone with that app alone.
Good benchmarking app is "AnTuTu"
Click to expand...
Click to collapse
yeah tried link2sd... and swapper... neither did a thing
I'll check out that AT
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
kevp75 said:
yeah tried link2sd... and swapper... neither did a thing
I'll check out that AT
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Link2sd and similar apps are really only for adjusting storage space. Performance modding lies in Android Tuner and other like apps... AT is a beast of an app though. You can get the link2sd function through it and ramp up the cpu. Try freezing as much bloatware as you can and tune up your build.prop settings as a start to get better performance with the app
megamanDJ said:
Link2sd and similar apps are really only for adjusting storage space. Performance modding lies in Android Tuner and other like apps... AT is a beast of an app though. You can get the link2sd function through it and ramp up the cpu. Try freezing as much bloatware as you can and tune up your build.prop settings as a start to get better performance with the app
Click to expand...
Click to collapse
lookin into it now just hope I dont create a paperweight LOL
bloatwares already gone... thank u Titanium Gone so far as freezing the TouchWiz Launchers without issue
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
kevp75 said:
lookin into it now just hope I dont create a paperweight LOL
bloatwares already gone... thank u Titanium Gone so far as freezing the TouchWiz Launchers without issue
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
You should be OK as long as you freeze instead of uninstalling the system apps. Or at least make backups of them in case you need to get an OTA update. If you are missing system files then it makes getting upgrades a pain in the butt. I assume you have a custom recovery too? Everything is easily reversible that you do on AT. The only issue I ever had was when i tried to have certain CPU settings apply themselves with init.d without kernel support. All I had to do was flash the disabler in recovery that you can create in the app.
For good performance setting you can try this: set CPU gov to interactive, use most of the presets available for the build.prop menu, set a bigger I/O cache with "deadline" scheduler in the SD menu, set a more aggressive OOM preset, and increase entropy as high as you can. All of these while setting them to apply on boot. There is a lot to discover in that app so have fun and make backups!
megamanDJ said:
You should be OK as long as you freeze instead of uninstalling the system apps. Or at least make backups of them in case you need to get an OTA update. If you are missing system files then it makes getting upgrades a pain in the butt. I assume you have a custom recovery too? Everything is easily reversible that you do on AT. The only issue I ever had was when i tried to have certain CPU settings apply themselves with init.d without kernel support. All I had to do was flash the disabler in recovery that you can create in the app.
For good performance setting you can try this: set CPU gov to interactive, use most of the presets available for the build.prop menu, set a bigger I/O cache with "deadline" scheduler in the SD menu, set a more aggressive OOM preset, and increase entropy as high as you can. All of these while setting them to apply on boot. There is a lot to discover in that app so have fun and make backups!
Click to expand...
Click to collapse
yeah Ill b doing most of these tomorrow im on the rom in my sig... which unfortunately does not allow safestrap to mount /system so im unable to do a nandroid.... but i did just finish a titanium bacup so at least if I do bork... Ill still have my apps
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
kevp75 said:
yeah Ill b doing most of these tomorrow im on the rom in my sig... which unfortunately does not allow safestrap to mount /system so im unable to do a nandroid.... but i did just finish a titanium bacup so at least if I do bork... Ill still have my apps
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I found something weird. I assume it's AT... but not really sure. I'm using Aviate Launcher, and what I noticed that after AT did it's "cleaning" some of the shortcuts to a few apps would dissappear... always the same apps (minecraft, xda, etc...)
Would you happen to know how I can prevent this? I had it set to clean and optimize all apps/databases and trim partitions.
kevp75 said:
I found something weird. I assume it's AT... but not really sure. I'm using Aviate Launcher, and what I noticed that after AT did it's "cleaning" some of the shortcuts to a few apps would dissappear... always the same apps (minecraft, xda, etc...)
Would you happen to know how I can prevent this? I had it set to clean and optimize all apps/databases and trim partitions.
Click to expand...
Click to collapse
It happens after the cleaning process? Right after boot complete? You can check to see if it is AT by disabling the boot scheduler in device manager, and then a few minutes after the phone boots up manually run the cleaning process to see if its happening when it does it.
Also, when i had shortcuts disappear on me it was because I had them moved to or from the device or ext sd card. Some apps need to be installed to internal storage for them to work right. You should never move any apps to the system storage that weren't already there. That's different from internal storage, which is the same as internal SD. The system partition is where the pre installed apps reside (and bloatware). If you can find the system app in the play store then you can most likely, safely, move it elsewhere. Try to change where the missing shortcut apps are stored. AT is zip-aligning apps when it does its optimizations to make them load faster and give you a more organized file system.
megamanDJ said:
It happens after the cleaning process? Right after boot complete? You can check to see if it is AT by disabling the boot scheduler in device manager, and then a few minutes after the phone boots up manually run the cleaning process to see if its happening when it does it.
Also, when i had shortcuts disappear on me it was because I had them moved to or from the device or ext sd card. Some apps need to be installed to internal storage for them to work right. You should never move any apps to the system storage that weren't already there. That's different from internal storage, which is the same as internal SD. The system partition is where the pre installed apps reside (and bloatware). If you can find the system app in the play store then you can most likely, safely, move it elsewhere. Try to change where the missing shortcut apps are stored. AT is zip-aligning apps when it does its optimizations to make them load faster and give you a more organized file system.
Click to expand...
Click to collapse
Yeah, happens right after boot process is complete. They just disappear from the Aviate Launcher collections areas. The apps themselves are still there... so it could be something in the Launcher doing it as well...
Yeah, not linking apps to sd card Not anymore at least lol.
kevp75 said:
Yeah, happens right after boot process is complete. They just disappear from the Aviate Launcher collections areas. The apps themselves are still there... so it could be something in the Launcher doing it as well...
Yeah, not linking apps to sd card Not anymore at least lol.
Click to expand...
Click to collapse
The link2sd is mainly for phones with a small system storage. Our phones have a decent reserve set aside for it. It shows that the system memory is almost full, but its because the os is stored there. Some phones with a small internal storage have problems downloading apps once it gets just about full, even if the internal sd has plenty of room and get the "not enough storage" notification. Link2sd helps solve that for those devices. Android started making the mistake of installing apps to internal when they should be installed to SD. Something that didn't happen in earlier versions of Android. If you need room on the internal sd I know a couple of tricks to free up a large amount of space. Especially if you have 2 ".thumbdata" files in the DCIM directory that can each hold up to 500mb or more of crap you don't need at all. You can tell if you have them if your file manager is set to show hidden files and just deleting them doesn't work as they rebuild themselves after boot... total waste of space!
megamanDJ said:
The link2sd is mainly for phones with a small system storage. Our phones have a decent reserve set aside for it. It shows that the system memory is almost full, but its because the os is stored there. Some phones with a small internal storage have problems downloading apps once it gets just about full, even if the internal sd has plenty of room and get the "not enough storage" notification. Link2sd helps solve that for those devices. Android started making the mistake of installing apps to internal when they should be installed to SD. Something that didn't happen in earlier versions of Android. If you need room on the internal sd I know a couple of tricks to free up a large amount of space. Especially if you have 2 ".thumbdata" files in the DCIM directory that can each hold up to 500mb or more of crap you don't need at all. You can tell if you have them if your file manager is set to show hidden files and just deleting them doesn't work as they rebuild themselves after boot... total waste of space!
Click to expand...
Click to collapse
Yeah, I'm good with space. 5.9GB free on internal, and 23.3GB free external
kevp75 said:
Yeah, I'm good with space. 5.9GB free on internal, and 23.3GB free external
Click to expand...
Click to collapse
So, I ended going back to stock. re-rooted, the whole nine. Installed the Launcher... guess what... missing shortcuts, so it's definately not AT doing it
Hey man, thanks a ton for the help here... for some reason my XDA app isn't working so great, so I can't thank you enough
Borked it... DOH
Not real sure what did it either.
Not really borked, but now I am getting Google Play Store Force Closes every second or so... I've tried the 'settings'->'force close', 'settings'->'clear cache/data' reboot tricks... not of them worked.
I have all my apps Titaniumed already (except AT), so I'm going to revert the rom back...
kevp75 said:
Borked it... DOH
Not real sure what did it either.
Not really borked, but now I am getting Google Play Store Force Closes every second or so... I've tried the 'settings'->'force close', 'settings'->'clear cache/data' reboot tricks... not of them worked.
I have all my apps Titaniumed already (except AT), so I'm going to revert the rom back...
Click to expand...
Click to collapse
Somesthing might be wrong with the google play services app. Or the google framework app. Can you restore all the google apps to their last working backups? Or the original versions if that dont work.
---------- Post added at 08:11 PM ---------- Previous post was at 08:03 PM ----------
What firmware are you on? If you have everything backed up on Titanium to the external sd, and if you brick it just flash the same firmware or one newer then reroot. I went from MF3 to MK2 that way with no problem. And its easy to root and Safestrap. Just search "MK2 recovery from brick" and you will run into the link with all the tar files you need.
megamanDJ said:
Somesthing might be wrong with the google play services app. Or the google framework app. Can you restore all the google apps to their last working backups? Or the original versions if that dont work.
---------- Post added at 08:11 PM ---------- Previous post was at 08:03 PM ----------
What firmware are you on? If you have everything backed up on Titanium to the external sd, and if you brick it just flash the same firmware or one newer then reroot. I went from MF3 to MK2 that way with no problem. And its easy to root and Safestrap. Just search "MK2 recovery from brick" and you will run into the link with all the tar files you need.
Click to expand...
Click to collapse
Yeah, tried the restore of all thos.
on NB1... sort of I did the Deadly Venom 3.0 SafeStrap =) Anyways, I'm backup and running after a reflash... no biggee, didn';t take all that long to do LOL

Categories

Resources