I5700 and ADB - Android Software Development

hi all, I tried to use adb with samsung I5700 (os 1.5 kernel 2.6.27) but no success
I have the latest JDK, SDK and drivers, the phone is correctly installed but when using adb (V 1.0.26), it show no device found (phone in debug usb mode).
can someone tell me where is the problem ? why adb don't work with my I5700 ?

angel25dz said:
hi all, I tried to use adb with samsung I5700 (os 1.5 kernel 2.6.27) but no success
I have the latest JDK, SDK and drivers, the phone is correctly installed but when using adb (V 1.0.26), it show no device found (phone in debug usb mode).
can someone tell me where is the problem ? why adb don't work with my I5700 ?
Click to expand...
Click to collapse
The same problem on my side:
adb (V 1.0.26)
but custom ROM from Samdroid (Leshak)
May be some one know about problem in deep?
Thank you in advance.

I had a lot of issues with drivers.
I got it to work by following some of the tutorials on the samdroid forum.
forum[dot]samdroid[dot]com is mainly devoted to our spica.

Related

adb with 2 Magics doesnt work.

Hi,
I want to use 2 magics on my pc via adb. My first one (now with android 2.1) works ok via adb. (it worked all the way from 1.5 to 1.6 to 2.1)
Now my gf has a Magic too, With a rootet 1.6 fw.
It gets recocnized as masstorage (yes usb debug is enabled )
but it wont get found in adb (adb devices)
I dont know what to do, somehow i cant install ne drivers. but i dont understand why i would need new ones as it is the same devices (ith same SPL)
anyone knows something?
thanks in advance
Give this a go, it worked for me.
First download USBDeview - http://www.nirsoft.net/utils/usbdeview.zip
Unzip it
Run USBDeview.exe as Administrator
You will see all drivers being used on your computer
Highlight and Uninstall all drivers with the description have HTC Android (Should be 3 of them)
Right Click on the driver and press uninstall
Once done, Unplug your phone and plug it back in
You should now get the notification of the ADB device
Follow the steps above to install the drivers

[Q] SDK Manager

Hy guys I've got a bit of a problem over here. I want to use my wildfire for testing apps as a emulator in eclipse. Problem is that in SDK manager cant ''find'' my phone. So far i download the USB driver package, revision 3. But when i connect to the computer the windows cant find the drivers in directory "....\android-sdk-windows\usb_driver". Then i installed HTC sync since it has usb drivers, but still i couldnt see it in SDK manager. I runned ddms where i'm able to see my phone. At the end i deleted the drivers and installed PdaNet, the result was the same.
I wonder what i'm i missing ?
Btw what option should i choise when i connect phone to the computer ? ( Charge only, HTC sync etc. )
And yes i set my phone to USB Debug mode
I'm using Windows XP SP3 & Wildfire is not rooted ( 2.1 android )
I hope my english is fine and thank you for your answers
Anyone ?
You windows xp is 64bit ? If yes, you can't install this. And if no, try install drivers from sd card.
No i use 32 bit system , but i'll try to install them for SD

[USB Drivers] Galaxy S GT-I9000 (Working on ICS)

Hello.
And bacon and spam:
I've recently upgraded my SGS to ICS (ICSSGS ROM) and started to develop a simple application.
So, now i've got to the point that the emulator starts to show its limitations, so i need to debug directly on the real device.
Well, i've been trying to make ADB recognize my phone, tried several usb drivers from several sites, none of them worked.
After several hours spanking windows, it's finally working (yes! almost 6 AM in the morning!).
What matters:
So, to anybody who have the same problem as i had, do the following:
0. Uninstall any drivers that you've tried before.
1. Extract the zip file that i've uploaded to anywhere you like.
2. Enable debugging on your phone and connect it to PC throught the USB cable
(Just connect it, don't mount)
3. On your computer, click Start -> Right click on "Computer" -> Manage
This will open the "Computer Management" window (it might take some seconds to load).
4. Click "Device Manager". Now you should find your device in the list. It must be really easy to find. It's called something like "GT-I9000" or "GalaxyS" and it has a yellow warning sign next to it.
5. Right click on it and choose "Update Driver Software". In the window that appears, choose "Browse my computer for driver software". It then asks you where is the driver.
6. Click the "Browse" button and choose the folder you extracted from my zip file.
(If you didn't change it, it must be called "Android Composite ADB Interface")
7. Click "Next" and cross your fingers. If you're lucky, it may work for you.
Final notes:
1. I'm not responsible for ANYTHING. Whatever you do, it's your own choise to do it. I guarantee absolutely nothing.
2. This is was tested on Windows 7 - 64 bits with Team ICSSGS RC4.2 ROM and Semaphore ICS 0.9.1 Kernel.
3. Have fun.
4. If you try this, please answer the topic and tell everybody if it's working for you (mentioning your Windows version and what ROM you use).
Driver file:
-> http://www.mediafire.com/?t8ekrd9ly3mwwbk
Missing file when installing driver on windows 7 x64
Hi,
I have recently installed the most recent Dark Knight ICS 4.0.4 build to my Samsung Galaxy S. The ROM seems very good but I'm an android app developer and need to be able to debug my applications on the device via USB.
I have tried the driver provided in the thread which won't install due to a missing file according to the Windows 7 x64 driver install wizard. The exact message is displayed after step 7 and says:
"Windows found driver software for your device but encountered an error while attempting to install it."
"Android Composite ADB interface"
"The system cannot find the file specified".
Is there a file missing in the package? Has anybody managed to get this driver working?
Cheers,
Ben
Does it say that it doesn't find a controller or that is there a missing file?
Anyway, please try this installer and let me know if it works for you:
http://www.mediafire.com/?v70501cxbzzdvc2
What's wrong with the Nexus S drivers available with Android SDK?
Google USB driver, R4 developer.android.com/sdk/win-usb.html
The SGS will present it self like that when it is running ICS/CM7/CM9.
Sent from my GT-I9000
METEMEDO said:
Does it say that it doesn't find a controller or that is there a missing file?
Anyway, please try this installer and let me know if it works for you:
http://www.mediafire.com/?v70501cxbzzdvc2
Click to expand...
Click to collapse
Dont work for me.
System: Windows 7 x64
Android 4.04 Dark Knight
Nevertheless thanks for your approach. I'll test if it works with the SDK Updater.
I'm going to test in my desktop this weekend to check if it works with it.
I have the same problem, but with WIndows 7 32 bit. Drivers from discusion doesn't work. Don't you have some for 32 bit?
I found SDK Components on developer.android.com, where is Android driver which suppose to work, but unfortunately ODIN still do not see phone.
I also have the same problem but mine is worse because my phone is completely down after I tried to restore from a GB ndriod backup failure , phone won't boot , cannot boot into recovery only in download mode but no way my 4 x computers would detect the phone now ....tried using heimdall in linux as well as sdb, no go....so sad...help...
Sent from my Dell Streak using XDA
Using Google USB drivers finally worked for me. They can be optionally installed with Android SDK using SDK manager (extras). After installation drivers can be found in <sdk>\extras\google\usb_driver.
Just follow the instructions in the first post to find your device from device manager with exclamation mark. Need at least one reboot to work and I also redirected the driver installation process to Google usb driver directory but now ADB finally recognizes my SGS (MyICS, Android 4.0.3).
Edit: Operating system Vista 64-bit
[Currently stuck in "error: device not found" while trying adb push -command. I will update if I find a workaround. Probably something to do with inf-file.]
For alternate .inf -file (optional):
Google "usb-drivers-not-working-after-flash-latest-rom-ota" and see post #12 to see alternative inf-file. Some have managed to make adb recognize the device with that file, but I have at least this far been unsuccessful.
Edit: Problem above was caused by me being stupid and trying to use push in shell, which caused phone unable to locate host system folders. I don't know if that inf file has anything to do with drivers working now, but go ahead and try it if doesn't work with the original .inf
I got my i9000 recognized using the latest drives from the Google sdk
That‘s great
http://ics.samsung-updates.com/addons/usb_driver.zip
oxidising said:
I got my i9000 recognized using the latest drives from the Google sdk
Click to expand...
Click to collapse
I tried last night didn't work for me.... (r18)
Sent from my Dell Streak using XDA
oxidising said:
I got my i9000 recognized using the latest drives from the Google sdk
Click to expand...
Click to collapse
Daha açık anlatabilir misiniz?
IWillExplain said:
http://ics.samsung-updates.com/addons/usb_driver.zip
Click to expand...
Click to collapse
... this driver actually worked for me...!
(Tiramisu ICS)
USB option has been lost in my galaxy s
RazorNova said:
Using Google USB drivers finally worked for me. They can be optionally installed with Android SDK using SDK manager (extras). After installation drivers can be found in <sdk>\extras\google\usb_driver.
Just follow the instructions in the first post to find your device from device manager with exclamation mark. Need at least one reboot to work and I also redirected the driver installation process to Google usb driver directory but now ADB finally recognizes my SGS (MyICS, Android 4.0.3).
Edit: Operating system Vista 64-bit
[Currently stuck in "error: device not found" while trying adb push -command. I will update if I find a workaround. Probably something to do with inf-file.]
For alternate .inf -file (optional):
Google "usb-drivers-not-working-after-flash-latest-rom-ota" and see post #12 to see alternative inf-file. Some have managed to make adb recognize the device with that file, but I have at least this far been unsuccessful.
Edit: Problem above was caused by me being stupid and trying to use push in shell, which caused phone unable to locate host system folders. I don't know if that inf file has anything to do with drivers working now, but go ahead and try it if doesn't work with the original .inf
Click to expand...
Click to collapse
What should i do after instaling SDK
IWillExplain said:
http://ics.samsung-updates.com/addons/usb_driver.zip
Click to expand...
Click to collapse
This worked for me
The very important thing is that newest Google USB driver is in
Code:
[B]<android-sdk>/extras/google/usb_driver/[/B]
location, not in
Code:
<android-sdk>/usb_driver
It really makes the difference !
these drivers only worked once...
all the other times killing and starting over adb i was getting error messages like "device not found" and "protocol fault" even though adb devices was listing the device online.
apparently i connected the phone to another USB3 port on my pc (front panel) and that was it!! it now works every time i type adb shell or adb devices.i no longer get any error messages.rather weird
anyway..i also wanted to be up to date with everything so i uninstalled all related software like the older java 6 jdk, Android SDK and the drivers mentioned above.
i followed the procedure below and installed all the latest packages:
latest java 7u5 JDK, the latest Android SDK (nstaller_r20.0.1-windows.exe) then ran sdk-manager and loaded http://developer.android.com/tools/extras/oem-usb.html#InstallingDriver google USB drivers rev 6. then installed these drives so i got the ADB composite interface on my device manager and it all works fine now.
I recenelty installed latest ICS , and SDK recognizes my phone as ACER ADB , when I'm pretty sure its a Samsung I9000 . I tried uninstalling the ACER ADB and install the one that the guy posted in the first post , and it didn't work , it said this driver is not compatible , oddly it reinstalled ACER ADB though. I can't even uninstall it at all , I removed all my Samsung drivers , and everything else I installed for Samsung , and its still there , I even tried removing the GOOGLE USB drivers , still there.
Neendless to say that the phone doesnt connect to the PC at all even though it says everything is alright. For example i got ths gPAD app , which uses the USB with Debugging to turn the phone into a mouse , but it says its not connected even though it is.

[SOLVED] Virtual Machine running Windows with ADB

I am using my laptop for ADB currently, but I want to know if it is possible to run ADB through windows in a Virtual Machine? I have gotten to where I have ADB running and the VM reconizeds the phone but as soon as I type,
Code:
adb devices
There is no response. Side note: I am using VMware and am running Tvall's CM7 on my phone.
Edit: solved was a driver issue
adb works when drivers for adb were installed
did you install drivers from Android SDK Tools?
at second you need turn usb debugging on (settings/applications/development)
5[Strogino] said:
adb works when drivers for adb were installed
did you install drivers from Android SDK Tools?
at second you need turn usb debugging on (settings/applications/development)
Click to expand...
Click to collapse
Yes I know this. The virtual machine knows the device is there(ADB drivers are installed) but in cmd it doesn't work. USB debugging is on, another option is the wireless ADB from CM7, but I have no idea how that works. Thanks for the help.
acseazzu said:
Yes I know this. The virtual machine knows the device is there(ADB drivers are installed) but in cmd it doesn't work. USB debugging is on, another option is the wireless ADB from CM7, but I have no idea how that works. Thanks for the help.
Click to expand...
Click to collapse
When connecting phone through usb debugging there is 'Android USB Devices' section in Device Manager (My Computer / Manage / System Tools / Device Manager). Do you have this section while connecting?
Wireless adb application establishes connection via custom port and adb can use this port to communicate with phone.
5[Strogino] said:
When connecting phone through usb debugging there is 'Android USB Devices' section in Device Manager (My Computer / Manage / System Tools / Device Manager). Do you have this section while connecting?
Wireless adb application establishes connection via custom port and adb can use this port to communicate with phone.
Click to expand...
Click to collapse
In device Manager it has "Android Composite ADB Interface" and a "HTC Android Device" My VM connects to HTC Android device, not letting me connect to it in ADB. Before I connect my device and before it installed the drivers I installed the Google driver package from AndroidSDK. Thanks for your help.
How did you fix it?
acseazzu said:
In device Manager it has "Android Composite ADB Interface" and a "HTC Android Device" My VM connects to HTC Android device, not letting me connect to it in ADB. Before I connect my device and before it installed the drivers I installed the Google driver package from AndroidSDK. Thanks for your help.
Click to expand...
Click to collapse
So how did you end up fixing this? I want to connect my phone to the VM.
This is happening to me right now. I have a VM Windows 7, it can detect a "HTC Android Device" but the platform-tool command line cant detect my phone. Even with ADB USB drivers, platform-tools, as well as HTC-sync installed.
How did you fix it? Please tell me
kazzarok said:
So how did you end up fixing this? I want to connect my phone to the VM.
This is happening to me right now. I have a VM Windows 7, it can detect a "HTC Android Device" but the platform-tool command line cant detect my phone. Even with ADB USB drivers, platform-tools, as well as HTC-sync installed.
How did you fix it? Please tell me
Click to expand...
Click to collapse
I uninstalled all the drivers (with USBdeview) and instead of installing with the Google Driver I used the HTC one for MyTouch 3G. I think I installed the drivers before I plugged in the phone. And also what software are you using to run your VM?
acseazzu said:
I uninstalled all the drivers (with USBdeview) and instead of installing with the Google Driver I used the HTC one for MyTouch 3G. I think I installed the drivers before I plugged in the phone. And also what software are you using to run your VM?
Click to expand...
Click to collapse
I am using Oracle VM Virtualbox. Doing VM Windows 7 under Ubuntu 11.10.
I have been trying a few times in the VM Windows 7. I tried the lastest HTC Sync 3.0.0.0 as well as the older version 2.0.3.3 that worked when I was using full Windows 7.
But in VM, nothing works
The VM win 7 can detect a USB Composite Device, but it cant find the correct driver.
edit:
Oh my god!! hopefully you still havent read this post yet because I just got it working!
In the settings of the VM, theres an option to enable USB 2.0
But to enable that, we must install the Oracle VM VirtualBox Extension Pack
It works!
edit2:
but somehow the transfer speed is really slow...
i guess i will just install windows again dual boot it
Yay! Congrats if I helped at all please hit the thanks button.
Sent from my Dream/Sapphire using XDA
acseazzu said:
Yay! Congrats if I helped at all please hit the thanks button.
Sent from my Dream/Sapphire using XDA
Click to expand...
Click to collapse
Not until you tell me about your VM
I want to know that because at the moment the transfering and intallation of APK files in Oracle VM VirtualBox is utterly slow (comparing with my old Win7 days), I am interested in other alternative VM which might be faster.
I see you mentioned VMware in you first post, I went to their website (link) but I see a lot different products... can you tell me which one you used, can you please tell me more about your VM?
Thanks in adcance.
edit:
Hey there again, I fainlly got VMware working.
I went for VMware Player 4.0.2. But for Ubuntu 12.04, we need a custom patch the VMware before it can run gracefully.
Not I have got it running now, VMware is so much faster than Oracle VM.
Thanks for the suggestsion!
kazzarok said:
Not until you tell me about your VM
I want to know that because at the moment the transfering and intallation of APK files in Oracle VM VirtualBox is utterly slow (comparing with my old Win7 days), I am interested in other alternative VM which might be faster.
I see you mentioned VMware in you first post, I went to their website (link) but I see a lot different products... can you tell me which one you used, can you please tell me more about your VM?
Thanks in advance.
edit:
Hey there again, I fainlly got VMware working.
I went for VMware Player 4.0.2. But for Ubuntu 12.04, we need a custom patch the VMware before it can run gracefully.
Not I have got it running now, VMware is so much faster than Oracle VM.
Thanks for the suggestsion!
Click to expand...
Click to collapse
I personally use Workstation. But for me VMware is alot faster than Oracle VM VirtualBox. Glad I could help
adb driver won't connect
I'm running windows parrallel on my mac. On the windows side I have the samsung drivers downloaded but when I go to root my phone the command line says doesn't recognize. Anyone know away I can get drivers to recognize phone when running virtual on a mac?

ADB Driver ( parameter incorrect )

Hi,
I have bought a Nexus 4, and im trying to settings it for my android developpement ..
So i have tried to install the ADB driver manually, and it give me this message : Paramètre Incorrecte
I have tried differents tutos with no success :/
In my registry i have 4 folders :
VID_18D1&PID_4EE2
VID_18D1&PID_4EE2&MI_00
VID_18D1&PID_4EE2&MI_01
VID_18D1&PID_4EE6
I have the 4.2.2 version , and the lasted Android SDK,ADB. And im in Win Vista
And the MTP is correctly installed ( i can access to my folder in the phone)
What i'm doing wrong ?
And thanks in advance,
Any help
Dchar said:
Any help
Click to expand...
Click to collapse
Try using wugfresh toolkit,it will install the drivers and test if they work
Use the Universal Naked Driver
http://forum.xda-developers.com/showthread.php?t=1998650

Categories

Resources