Related
So, I'm experiencing what everybody else is with this ROM. That initial volume level starts out soft and gradually increases to the max that I have it set to. Some have stated they like this and that's fine. But, I HATE it :evil: . I can never hear my phone ring anymore if it's in my pocket. Has anybody found a possible registry key or setting somewhere to turn this off?
And if any AT&T folks are listening.. I'd like a setting in the volume area to turn this off or on.
Phone Profile
Have you check under phone profiles... Ascending Ring change to Standard Ring
Dustoff
I don't have a phone profile, or i should say i don't see any where for that option. In the phone settings area the Ring Type is set for Ring. There is an option for "Increasing Ring" but that's even worse than it is already. I don't think this is what I'm looking for.
Since the WM2003 upgrade on my SX56, 've noticed issues with the speakerphone volume. I can barely hear it in fact. Any thoughts on this one?
Fiddled around with the volume setting, moved it up and down, and the now the volume issue seems resolved. Can't say for sure if that's what resolved it, but it's fine now.
I'm experiencing the same problem with the AT&T rom.. I'm going to take a look around in the registry later on... before I go installing any apps
Well I have taken a look @ the processes running and can't see anything obvious that would be doing the volume thing..
So I have had a poke about in the registry and have found a section with sound profiles and it has an attenuation property, I have tried adjusting this, and deleting it but still no good
Also there is an entry in the registry called Hack and mentioned Vol in the string... but it didn't make any difference when I deleted that either :roll:
If anyone thats a bit more acomplished than myself with the PPC Phone could take a look and find a solution to this, i'm sure many users would appreciated it
Has anyone figured out how to make the volume level constant yet?
Any solutions to get the volume working well on A.30.09 ENG yet?
Nope. I just put my phone volume on next to the top setting and the system volume two levels below it. Works fine then. As long as the system volume is two levels below it will not graduate the sound.
valheru said:
Nope. I just put my phone volume on next to the top setting and the system volume two levels below it. Works fine then. As long as the system volume is two levels below it will not graduate the sound.
Click to expand...
Click to collapse
Another thing try ur Reminder set an Alarm you'll notice that you cannot change the Alarm1 ringtone thus the sound stays low ..I tried many things in the registry and no luck as well I wish would some1 help us to resolve this Issue, but!! I made contacts with att's support ,I told them about this problem thus I'm not the only one who's experiencing this, lots of ppl sees this ennoying , I hope they would help here...
Hi everybody,
I have this one problem. After 2 days of usage, my Hermes suddenly went mute. No vibration or screen click can be heard even If I changed it to the loudest. I missed a lot of calls and sms due to this problem. The only way to solve this problem that I employ is by soft-reset my device.
I really hope somebody can help me tracking to root-cause of this problem and in the same time providing or proposing a solution to it.
Kindly help. Regards
morisa
Device: DoPoD 838Pro
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Phone goes mute
I think I'm having that problem too. Just out of the blue it happened. Didn't install anything extra the whole week. But when someone calls it rings, and if it's missed, it doens't play the miss call tone... or any other sound in that case.
darky said:
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Click to expand...
Click to collapse
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
mmorisa said:
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
Click to expand...
Click to collapse
Got the same issue here and I don't use speakerphone
my pda´s auto mute so
No sound although speaker icon no in mute
I have the same problem. Out of the blue no sound is heard at all. I tried changing volume but it did not do any thing. Had to shut down (not soft reset) and restart device and it works fine. This happen several times and I can figure out why it does this.
If anyone can help...
Tal
Same here, I'm using a X01HT Softbank variant TYTN flashed with the latest HTC WWE rom and after about like 12 hours of use the device goes mute for some reason, making calls it works perfectly but playing sounds or ringers the speaker does not work. Anyone have any ideas? I'm thinking of maybe re flashing the device since most of my information is on my storage card. I'll see if that fixes the problem :-\.
same problem here....
Same here. Only a reboot fixes it.
I have the same problem but it only happens when using the speaker phone. After the call ends, then there are no more system sounds etc. I then have to soft reset, which pisses me off as I use the speaker phone plenty in the car.
If i dont use the speakerphone, then there is no problem. Kind of strange....
Has anyone got any ideas on how to solve this?
I have same problem. I thought it was software related, but seems that it is caused by the speaker phone. I had the exact same problem with my old IPAQ 6515. It must be a software issue with WM although the 6515 had WM2003SE and the TYTN has WM5 so I do not know. Really annoying though as I use this phone for an alarm and it never goes off because the sound turns off sometime while I am sleeping - Uhggggg!
I also have the problem. Only a Softreset brings the speaker back to live.
my new problem...misery loves company
same here; curiously 2 pages into this thread and there are no real solutions.
I have solved the problem on my TyTN.
The Midlet Manager is the root cause for the Phone Mute issue on my device.
lol I just started getting this issue out of the blue after a couple of months and I didn't install anything :|
yeah nothing but a soft reset brings the sound back
Happens to me too. Strange coincidence - I've just checked my m3100 and it's giving me the silent treatment now. Time for another soft reset
I never use Midlets, so that rules the above theory out for me. However my battery was almost dead. I was using WiFi at the time, which turned itself off when the warning notifications popped up. Maybe when the battery drops below an acceptable level it turns the sound off to save power, but doesn't restore it after charging?
nope it happens to me even if my battery is fully charged
this used to happen on my i-mate PDA2k, and my JasJar (Universal) running both WM5, AKU3.2, 3.3, 3.5 and unfortunately even WM6 :S
Hi All,
After checking and testing the phone. I found out that the only way for me to solve the muting problem is by silencing the notification sound when a new email arrives. Since I have an unlimited EDGE/GPRS, my push mail is working around the clock. Thus, by not having the new email sound notify, the muting problem gone. This is caused by the notification event locking up the sound and not releasing it even after I read the mail. Previously the only way to resolve is by soft-reset but now, no more.
I have no idea whether this work or not for others but you might try and post your solution here.
Regards,
morisa
Ever since I purchased my HD2 (Telstra) in February, I have had a problem where the ring volume intermittently switches off and I cannot hear incoming calls. At some stage after with no attempted fix, another call comes through and the phone rings fine at the volume I have set. The problem doesn't seem to be attached to certain callers, it seems to do it at times no matter who calls.
The phone actually rings (albiet silently) when the problem occurs as I see the phone go to the incoming caller screen, but there is no ring volume. When I check the volume of the ring tone on the phone after the call it is still set to a bit under half way.
I have the original Telstra ROM installed. haven't tried the new one yet.
Has anyone else had this issue and found a solution? I don't want to go to all of the effort to reinstall everything just to find out that the problem still occurs.
Thanks.
Same here!
I have the US version but have had this issue with both the stock US rom as well as the offical update they just posted.
A soft reset fixes it, but its totally random and is a major pain in the ass.
Any tips? Please help!
i have the same exact problem with my leo.
does someone have a resolution for this?
Me too!
Glad to know it's not just my HD2 that has this issue. I run the UK stock ROM and have suffered with this since I first got the phone! Most of the time it's fine, just every now and again goes quiet and I miss a call... I have even had the ringtone start loud, and then fade out. Would love to know if there is a fix for this......
Hi boys,
i've a similar issue with my Acer S200 with Manila ROM (OS version 5.2.23123, Manila version 2.5.20153712.0).
In a randomic way, suddenly the ringtone volume goes zero. I have usually ringtone+vibration, and vibration disappear too, together with ringtone....!
So with a new call, i can see the "incoming call" sceen but no sound and no vibration alert me...
With a soft reset i can solve, but i cannot understand what is the condition that triggers this problem....
I have a disimilar issue, the sound of the HTC HD2 phone call keypad is too loud, anyway to silence it?
it is not problem go to sound settings and close quiet ring on pickup
feyisetan said:
I have a disimilar issue, the sound of the HTC HD2 phone call keypad is too loud, anyway to silence it?
Click to expand...
Click to collapse
go to settings , personal , phone, keypad ,and close it
hoss_n2 said:
it is not problem go to sound settings and close quiet ring on pickup
Click to expand...
Click to collapse
not active.
The problem sound like a bug, instead.
andremales said:
not active.
The problem sound like a bug, instead.
Click to expand...
Click to collapse
mine don't have this
Erm.. try this
Settings > Sound & Display > look for "Single Volume" and turn it OFF.
whenever I press the volume key it has the option to switch between System & Ring Volume Level.
Hope it helps!
nothing helped.. performed a hard reset, now the problem is gone
No ring volume
try this: HKLM\Software\HTC\VolumeOverlay --> Set "Default Page" to 0
It works on my T-Mobile hd2
gutchin said:
try this: HKLM\Software\HTC\VolumeOverlay --> Set "Default Page" to 0
It works on my T-Mobile hd2
Click to expand...
Click to collapse
Thanks, will try that. hope it helps
i will, thanks!
.mp3 extention causes the problem.
try .wma format, it should solve the problem
best solition
What is the best solution for this problem?? Change the REG Key or. Change .mp3 to .wma???
OK, everybody is claiming that low in call volume is fixed after 3/8 kernel, but try this: dial a number by keypad (with dial pad tones enabled) and make a call. listen to the volume level. Then disable dial pad tones and call again. there should be a huge difference in volume level. You can experiment the same thing by quickly enabling and disabling speakerphone while in a call. I guess the problem is, when a sound is played back (like a ringtone or dialpad tone) in call volume is reduced for a short time. This can be eliminated for outgoing calls by disabling dial pad tone or waiting 2 seconds before pressing call. But for incoming calls, even disabling ringtone is no good. I also tried LVH v3.6 to boost the in call volume but no good. I tried almost all builds, ROM and radio combinations. With the new kernels, all have this problem. The most important function for me is the phone part, anyone has a solution for this?
Did you really need to make a new thread for this? Couldn't this been posted in one of the -post your questions here- topic?
Fix: No, there's no obvious fix (yet). Best fix is to use the supplied (or custom) ear-piece. Never any problem with that.
I felt the need to make a new thread as the old threads were referring to old kernels and most people tend to read only the first post. I wanted to present my observations, which I believe are not stated before, in the original post. Sorry for bothering you and thanks for the info.
ozkaya said:
I felt the need to make a new thread as the old threads were referring to old kernels and most people tend to read only the first post. I wanted to present my observations, which I believe are not stated before, in the original post. Sorry for bothering you and thanks for the info.
Click to expand...
Click to collapse
I understand why you'd want to open a new thread for this, but this topic will just as much go down under as soon as it's solved or (more not-so-useless) threads get added later on.
Your observations + results could be stickied/hotlinked in the answer topic if they seem to be right-on the money. That way we keep it all nice and tidy, ánd more people would find a quick answer
I have the same exact problem. I hope there is a fix for this soon. Searched multiple times, but haven't found any answer.
I notice when you pick up an incoming call. The volume starts from soft and goes a little louder after about 2-3 seconds.
hi im also suffering from a low in call volume as well with my HD2 has there been any way to resolve this?
iam facing low rington and media volume , i can hardly hear my ringtone when on other room
I disagree with maseo I found this thread useful,
THANKS DUDE
Sent from my HTC HD2 using XDA App
hey, try this
when u wait for the other side to pick up the phone or u pressed the answer button when a call comes in
press on the Speaker button to use the speaker phone, then turn it off
repeat it again once
your volume will get lounder just like in WM.
Edit: oops. it was just a hardware failure, the front speaker had bad connection, there are another speaker in the chassis that worked.
thanks
i press the speaker on & off and then is more louder. i wish this will be fix soon.
IT WORKS!!
Hey, so I was/am having this problem but i tried the mute/unmute during a call and it worked. Incoming and outgoing. Only problem is seems to be low every new phone call. So i have to do the mute/unmute at the beginning of each call for it to be ok!
Hopefully there is a permanent fix soon?
Thanks for the post.
I have this same problem. I read somewhere someone having a fix on this.
One more thing, any of you guys had the robo-voice?
Got the same issue. Still no fix out there?
Hi, I've searched everywhere trying to fix the problem but none suggested by other users was able to fix it.
The problem I have is when someone calls me, I can barely hear them. However, when I make calls to other people, the call volume is absolutely perfect. I'm talking about the incall volume, not ringer just incase some people misread it.
I've done replacing the htcleo.acdb and default.acdb files, that didn't do it.
Some have suggested that turning off the Keypad tone fixed this issue, but it didn't do it for me either.
So if anyone has come across a working fix for this, please share your wisdom with me. Android on the HD2 just makes the phone 100 times better, just need to fix this issue to make it perfect.
It may be the rom
i also have the same problem and i noticed that after changing my rom.
I get that problem sometimes but how I sort it is to turn loud speaker on and off then its fine.
Sent from my HTC Desire using XDA App
i'm having the same problem with htc tattoo.
just installed the: CyanogenMod 7.0.0-RC2.2 (7007) 2.3.3