My mobile is stuck in the tri color screen and i have no idea what to do. i tried a few things on the forums but none really helped. I have tried to use mtty but my comp says its a virus and when i turn off my virus program it does not open the program.
can someone help me please?
for help
Thmzl said:
My mobile is stuck in the tri color screen and i have no idea what to do. i tried a few things on the forums but none really helped. I have tried to use mtty but my comp says its a virus and when i turn off my virus program it does not open the program.
can someone help me please?
Click to expand...
Click to collapse
hello you pharos is hardflash yes or not and you pharos is operator
sorry for my anglish is french
GUIGOU said:
hello you pharos is hardflash yes or not and you pharos is operator
sorry for my anglish is french
Click to expand...
Click to collapse
Hi, i have tried to hardflash it but it goes from 0% to 100% in like 1 second and gives 270 update error. also a new rom does not work.
Hi, does the pharos come from a particular operator ? Have you installed the HardSSL ? Have you flashed your pharos with an other ROM ?
You can also try to download and flash the ROM from here : http://shipped-roms.com/shipped/Pharos/
I have tried to use HardSSL but it didnt work. and now i tried one of your roms you suggested and it goes to 100% and after that it is tri collors again
Related
Hi guys,
Here's what I did (something very stupid) and what happened :
I have a NIKI100 which has simlock and HAD a vodafone dutch splash screen with original rom and radio.
I followed the instructions and managed to flash a new rom with
RUU_Nike_HTC_NLD_2.09.404.1_Radio_NikeMR_1.65.28.2 5_signed_Ship.exe
I still had SIMlock so I started over the procedure with Niki-SuperCID
Here I made the STUPID mistake to hardspl while I FORGOT to SSPL first!
so this is what happened next: rom update halted at 95% I got error and began
recovery. (1) Ever after this I get ERROR[262] whatever I try and update halts at 0%.
I tried to flash the ROM again but then I get error [294]:INVALID VENDER ID
everytime I reset the phone I get red-green-blue screen :
NIKI100
SPL-1.22.0000
CPLD-4
Upgrade ROM code error
please try again
I tried hardspl but I get (1)
Iknow I was stupid to forget SSPL first, but how do I get my phone back to work again ? any help would be very appreciated !!
Upgrade rom error code
help help same poblem.....
Not sure where I read it here, but you will need mtty. In there (for me it took several tries to get it to connect) type "set 16 0" - then "task 8".
I did! I did push that button!
I did the MTTY with set 0 16 then task 8 and it worked!!!
Thanks your highness!!
Now I can try the RUU again
DarkSayaJin said:
I did the MTTY with set 0 16 then task 8 and it worked!!!
Thanks your highness!!
Now I can try the RUU again
Click to expand...
Click to collapse
hi .. what exactly did you do ? i have the exact phone, exact error, exact program, downloaded from the attachement, and when i connect with mtty i can`t type in the console, only paste, and it doesn`t do anything for me. can you please explain what exactly did you do ? thanks
nevermind ......
don`t mind my post, i`m sorry i`m blind .... i was connecton thru com ports, i didn`t notice the usb button ... jeez i`m stupid, anyway connected thru usb , typed the commands and it rebooted with the windows 6.1 .. works perfectly now. thanks for your post and mtty attachment, very helpfull
DarkSayaJin said:
I did the MTTY with set 0 16 then task 8 and it worked!!!
Thanks your highness!!
Now I can try the RUU again
Click to expand...
Click to collapse
Same prob here...
I can't understand what u guys did... I don't see any USB button and don't know where to type...
help plz?!
Niki200
T-mobile HU
Original Rom
http://rapidshare.com/files/272691817/NikiT07.rar.html
See my attach plz.
Thkx.
P.S. "d ual Tou ch" is my pda...
i guess i have NIKI 100 and not 200...
I couldnt flash Hardspl any more.
I couldnt install either cooked rooms or original one.
All I see is the tri color screen with the following informaiton:
PLA100
SPL-1.25.0000
CPLD-2
Can you please help?
osama966 said:
I couldnt flash Hardspl any more.
I couldnt install either cooked rooms or original one.
All I see is the tri color screen with the following informaiton:
PLA100
SPL-1.25.0000
CPLD-2
Can you please help?
Click to expand...
Click to collapse
please search before posting a new thread!
http://forum.xda-developers.com/showthread.php?t=425922
nicandris said:
please search before posting a new thread!
http://forum.xda-developers.com/showthread.php?t=425922
Click to expand...
Click to collapse
I saw this yesterday, and I give it a try, the only issue I have is I have windows vista, so there is no active sync.
I tried to kill the process using ctrl Alt Del in order to see the USB port but I couldnt managed to do that.
Under windows Vista its called 'Windows Mobile Device Center' (wmdc.exe).
I tried everything
Dear All : I tried almost every thing mentioned in this subject over 4 or 5 threads ,I'm still not able to connect through USB ,I tried MTTY and also I can't see the USB in the available ports ,I tried with winXP and killed the activesync processes and tried with Win Vista and also killed the WMDC process BUT no way I failed.
At the boot screen I have the following
Pola100 MFG
SPL-2.20.oliNex
CPLD-2
Anyone have a solution please I use my Polaris in managing my business and now I;m in deep ****
hamed_marie said:
Dear All : I tried almost every thing mentioned in this subject over 4 or 5 threads ,I'm still not able to connect through USB ,I tried MTTY and also I can't see the USB in the available ports ,I tried with winXP and killed the activesync processes and tried with Win Vista and also killed the WMDC process BUT no way I failed.
At the boot screen I have the following
Pola100 MFG
SPL-2.20.oliNex
CPLD-2
Anyone have a solution please I use my Polaris in managing my business and now I;m in deep ****
Click to expand...
Click to collapse
i can see that hardspl is installed. did you tried flashing from sdcard?
i have had problems with stuck in bootloader (3 color) mode and also the prob with mtty in win vista...i try it on winxp and wow...it goes...
You use it to manage your business? Next time, dont mess with the ROM on your phone then
You seem to have SPL on the device. Try a different USB cable perhaps for connectivity.
nicandris said:
please search before posting a new thread!
http://forum.xda-developers.com/showthread.php?t=425922
Click to expand...
Click to collapse
i have the same problem and i tried this and tried almost all other bootlaod related threads and nothing worked, i have win xp and i can use the software advised but after everything works and the devise restart nothing happen and here we go to the same bootload three color screen.
what is shows is the following:
POLA100
SPL-1.28.0000
CPLD-2
the funny and wierd thing is that this happened without any notice and not during flashing or upgrading, i left the phone on the table and came back to see it stuck in the bootload screen
please help guys ..i spent till now 6 hrs with no benefit .... im a normal user
nicandris said:
i can see that hardspl is installed. did you tried flashing from sdcard?
Click to expand...
Click to collapse
I tried flashing from SD card and I had only the tri color screen with the data mentioned before and nothing happens,I tried use MTTY and I could never have the USB port listed in the drop list.
Thanks for your concern and in advance
wesram said:
i have the same problem and i tried this and tried almost all other bootlaod related threads and nothing worked, i have win xp and i can use the software advised but after everything works and the devise restart nothing happen and here we go to the same bootload three color screen.
what is shows is the following:
POLA100
SPL-1.28.0000
CPLD-2
the funny and wierd thing is that this happened without any notice and not during flashing or upgrading, i left the phone on the table and came back to see it stuck in the bootload screen
please help guys ..i spent till now 6 hrs with no benefit .... im a normal user
Click to expand...
Click to collapse
guys please helpppppp
up
hey ım usıng touch cruıse
pola100
spl 3.13.00
cpld-2
my cruıse not oen ower.always bootloader trı color .usb ok but ofıcıal rom ınstallıng problem yüzde1 later shuttıng.what must ı do?
I have a HTC ELF 0100 i want to change the language to english but i cant make anything. I try to hard reset the phone but this also is impossible. there is Windows mobile 6.1 installed in it.
Things you might need to know:
I HOLD the green and red Button and click on reset - for hard reset but nothing happens
To update an english rom i need to CID unlock. but this also fails saying ERROR 260.
And when try to upload a COOK rom it says ERROR 260 and the HTC screen become black i.e standy mode. it does not goes to the BOOTLOADER mode!
Where is the PROBLEM please help urgent !!
im sorry to tell u, but probably u dont have and elf. its a clone.
search the forum for clone info.
But i can assure you it an original one. Not clone or china made. But one things is that the battery is not an original one.
But i can assure you that the mobile is original. Not a China made.
zakiyy said:
But i can assure you it an original one. Not clone or china made. But one things is that the battery is not an original one.
But i can assure you that the mobile is original. Not a China made.
Click to expand...
Click to collapse
Use dsixda's All-in-one tool (http://forum.xda-developers.com/showthread.php?t=418892 ) to find the specific type of your phone.
Than we might be able to help you.
Dala11 said:
Use dsixda's All-in-one tool (http://forum.xda-developers.com/showthread.php?t=418892 ) to find the specific type of your phone.
Than we might be able to help you.
Click to expand...
Click to collapse
Hi man thx for the REPLY but this also i tried !! it does not shows anything !! Only giving Data UNKONw or something like that!
I was able to install ENABLERAPI.cab to make the above PROGRAM work.
i want to know why the ElF is not able to HARD RESET.... I HOLD the TWO BUTTONS [red&green] and PRESS RESET but it never enter the HARD reset..
Very Strange and time comsuming for me i need a REAL solution !!
zakiyy said:
Hi man thx for the REPLY but this also i tried !! it does not shows anything !! Only giving Data UNKONw or something like that!
Click to expand...
Click to collapse
Big chance your phone is a fake.. I'm sorry man..
Perhaps if you posted some pictures of your device (also the backside without the cover, and one without the battery) some might be able to help you figure out what's going on.
Hi
All what you mentioned : No hard reset, No bootloader, No Data with mtty mean one thing this is a chinese clone of ELF and you will find no solution here
Hard reset htc touch elf
hi everybody,
Please help me with my htc touch elf,
I try to hard-reset my htc that have windows 6.5 because of I can't run completely windows and can't soft reset it.
Please help me
Thanx !!!!!!!!!
HEY maaan !
just press the power off button + the camera button and the tri-color screen will be appeared
hi my friends.
I changed my jasjar's tomal 6.1 rom to Original WM5 for sell my phone
but after changing rom, i have a terrible problem.
when i closed the battery for change the simcard and turn it on. when the windows logo appears a blue screen showed and the gsm led begin to work (blinker).
after several soft resets the windows starts and ready to work but when i press the power button to standby the device (sometimes) for turn on the device (after standby) the screen didn't appear.!!
i'm very upset
after that i flashing the radio to newer version (1.18) and flash back to WM6.1 TOmal , WM6 , ... but i still have this problem.
in the tomal's wm6.1 rom (TML_v82_WM61_19960) before the problem shown an error appears under the windows logo > The Skin Is Not Loaded < and after that a black or blue screen appears and nothing...
please help me to fix it.
thanks friends
No Answer ?!
Really ?!
it's very important for me.
plz help
Only thing I can think of is to doc-format (mtty). And then flash ROM again. Then make sure you Hard Reset.
-Jonny- said:
Only thing I can think of is to doc-format (mtty). And then flash ROM again. Then make sure you Hard Reset.
Click to expand...
Click to collapse
What is the mtty ? doc-format ?
How can i do it ?
tnx for attention
DOC format
-Jonny- said:
DOC format
Click to expand...
Click to collapse
wow , thanks for guide me.
as your experiences , this work would be harmful for the device ?
thankx
It's not harmful - basically it totally wipes the device removing everything (including garbage). So you will, of course, need to flash a ROM afterwards.
ill try to explain my self the most cleary as possible speak spanish and if someone can help me in spanish way is better.... ok here is the thing...my phone has Windows Mobile 6.5 ... I try to re-flash it back to 6.1 i lock it backto 0.40 lock and use the stock rom from sprint cdma ... gave me error at 10% ... and when it gave me error i turn off the phone... now has no windows and get stuck in three color screen..i tryed to flash with Others roms But Fails .... the phone says spl-2.1.1000 CPLD-3 .... What You Recommend me to do? im so = (.. Help please!