Quiet Speaker - myTouch 3G Slide General

OK, so I have an issue. It'll probably take a universal solution, but since it's for a Slide I'm asking here, haha.
A few days ago, I was cooking and I had my phone out ( never doing that again D: ) and a bit of a buttery sauce splashed and got into the front speaker.
Now when I'm making calls, I can hardly hear what the other person is saying, it's so quiet. Is there something I can do about this? Maybe heat up the area and melt whatever's in there? I dunno what do since its got that little grill type deal.
I hope there is something easy enough that can be done. Thanks in advance.

SefEXE said:
OK, so I have an issue. It'll probably take a universal solution, but since it's for a Slide I'm asking here, haha.
A few days ago, I was cooking and I had my phone out ( never doing that again D: ) and a bit of a buttery sauce splashed and got into the front speaker.
Now when I'm making calls, I can hardly hear what the other person is saying, it's so quiet. Is there something I can do about this? Maybe heat up the area and melt whatever's in there? I dunno what do since its got that little grill type deal.
I hope there is something easy enough that can be done. Thanks in advance.
Click to expand...
Click to collapse
Honestly, I would not heat up the phone. Especially since the phone is over 90% plastic. What I would do is simply blow out the substance with a blow dryer set on cool or blow it with my mouth if I don't have a blow dryer. My girlfriend had a similar issue, but in her case she dropped the phone and I guess dirt got into it. I simply blew into the speaker (which is located in the back). I kept doing this for about 1minute straight and it worked for me. Whatever you do, do not use heat! Also try to blow out the substance with the battery unattached to the phone and the battery cover off allowing better access. I hope I'm not too late and I hope this helps.
sent from Mytouch Slide 3g using XDA App
www.GoTeamFriday.com

Related

Toilet Phone (Tear Down possibly?)

So I dropped my phone in the toilet which is awesome. After soaking it in bag of rice for pretty much 24 hours I can now:
Turn it on.
Recieve phone calls
Make calls
Generally use the touch screen and all buttons.
I am getting this weird error where it thinks there are head phones plugged in at all times. So luckily I'm using Cynanogenmod7 and have it set to ring to speaker at all times or else it would never ring. Because of this I have to either talk on speaker which is all good, or actually plug in the headset. Then I notice this weird feeling my ear... it is shocking me !!
Does anyone know enough of taking this apart to disable to headphone jack? Or to walk me through a tear down to see if I can fix this?
Sorry but thats HELLA FUNNY!!!
timbo1083 said:
Does anyone know enough of taking this apart to disable to headphone jack? Or to walk me through a tear down to see if I can fix this?
Click to expand...
Click to collapse
I had this issues with a client's iPhone 3GS.. it is actually applying a little current to your ear when you plug in the earphones and thats why you're feeling that. I tore down the phone and replaced the entire earphone flex cable assembly and everything was fine. I used a ifixit guide, but I don't see one for this phone. You can always replace all the water sensors on the phone and take it into a TMO store and hope for the best.
Related note: Sorry to hear that bro, GL with fixing it.
Sort of Related: On the brightside...atleast you didn't flush it down the toilet...my friend was hella drunk at a party couple months back, and ended up puking, anyways... he had his oldschool blackberry curve in his little front pocket of his button up, and it fell in...into his puke... being the genius he is... he flushed the toilet, thinking the puke would go down but his phone would not, he was sadly mistaken. Ha ha ha.
jaskwith said:
on the brightside...atleast you didn't flush it down the toilet...my friend was hella drunk at a party couple months back, and ended up puking, anyways... He had his oldschool blackberry curve in his little front pocket of his button up, and it fell in...into his puke... Being the genius he is... He flushed the toilet, thinking the puke would go down but his phone would not, he was sadly mistaken. Ha ha ha.
Click to expand...
Click to collapse
this is epic win! Roflmfao

[Q] Droid survived dunk- Now no vibration/ haptic feedback

Hello. I hate to even make the post, but I do so love XDA-developers, and maybe somebody can help me out.
I managed to dunk the phone, lets not discuss how, in some pond water. I scoured the int3rwebz for solutions and seemed best advice was to dry with desiccant and a suggestion of an alcohol wash or use of electrical contact cleaner.
The phone was on when dropped, off when recovered. Water damage indicator on the phone was tripped, but the battery still shows red x's. Waited the requisite amount of days and the phone works! everything works.
Now the problem- I get a bit worried about the left over pond scum and I decide I'd be the mad scientist to use electrical contact cleaner on it. Sprayed the suspect areas and immediately blew out the phone with compressed air, let it sit a few nights in desiccant. Now I have some small bubbles in the screen( which was NOT sprayed...) . FML. figure they may be trapped cleaner and eventually evaporate. Not a huge deal, just a bit annoying.
THEN I realize my vibration now does not work. I attribute this to either the water or contact cleaner.
I am now one of a million posting "PHONE GOT WET HALP!!!" and I apologize for such a newbie post, but is there any hope for the vibration to begin working again magically?
Haptic feedback is a fairly big part of this phones operation, and I use silent mode at work with vibration.
If I am screwed on the vibration I have another newbie question:
Can you set different ring tones or sms tones to certain contacts? I have had phones that do this in the past but I cant seem to find anything on this one. I am using the newest version of fission at the moment- 2.6.1.
THANKS for any help/ useful information!
-Andrew
If you look in the battery compartment, I think in the lower left, you can actually see the vibration motor. I would check and make sure that nothing is blocking it. However, I would venture to say that being that it is the only (powered) moving part and being it being so exposed, I would imagine that it would be the most likely to get short circuited or otherwise damaged by the water.
Concur
-Gilgamesh- said:
If you look in the battery compartment, I think in the lower left, you can actually see the vibration motor. I would check and make sure that nothing is blocking it. However, I would venture to say that being that it is the only (powered) moving part and being it being so exposed, I would imagine that it would be the most likely to get short circuited or otherwise damaged by the water.
Click to expand...
Click to collapse
I would concur that it was probably short circuited. Do you have insurance?
I agree. I absolutely did not purchase insurance. Live and learn. That's why I don't mind using it as is.
On to the second question- any way to select varying tones for different contacts in phone ringer/ sms tones? Would I just find something on the market for this? again using fission ROM.
Can you change the green missed call/ sms received LED?
I should have left the phone as it was after drying and not gotten paranoid about the "left over pond scum mineral residue" Oh well.. again live and learn.
Thanks again for the replies.
-Andrew
Open the contact that you wanna change, hit menu and select "options" and it's obvious from there. As for the LED, try an app called Missed Call.
Sorry I missed those to begin with.
atothec said:
Hello. I hate to even make the post, but I do so love XDA-developers, and maybe somebody can help me out.
I managed to dunk the phone, lets not discuss how, in some pond water. I scoured the int3rwebz for solutions and seemed best advice was to dry with desiccant and a suggestion of an alcohol wash or use of electrical contact cleaner.
The phone was on when dropped, off when recovered. Water damage indicator on the phone was tripped, but the battery still shows red x's. Waited the requisite amount of days and the phone works! everything works.
Now the problem- I get a bit worried about the left over pond scum and I decide I'd be the mad scientist to use electrical contact cleaner on it. Sprayed the suspect areas and immediately blew out the phone with compressed air, let it sit a few nights in desiccant. Now I have some small bubbles in the screen( which was NOT sprayed...) . FML. figure they may be trapped cleaner and eventually evaporate. Not a huge deal, just a bit annoying.
THEN I realize my vibration now does not work. I attribute this to either the water or contact cleaner.
I am now one of a million posting "PHONE GOT WET HALP!!!" and I apologize for such a newbie post, but is there any hope for the vibration to begin working again magically?
Haptic feedback is a fairly big part of this phones operation, and I use silent mode at work with vibration.
If I am screwed on the vibration I have another newbie question:
Can you set different ring tones or sms tones to certain contacts? I have had phones that do this in the past but I cant seem to find anything on this one. I am using the newest version of fission at the moment- 2.6.1.
THANKS for any help/ useful information!
-Andrew
Click to expand...
Click to collapse
First off, this isn't really a newb post. Not once have I seen "is there any to trick Verizon into sending me a new phone blah blah blah"
Second, I think you got really lucky here especially for the phone having been on, and ESPECIALLY that the battery didn't get wet or damaged. For what happened, the vibration being gone is pretty minor damage.
orkillakilla said:
Second, I think you got really lucky here especially for the phone having been on, and ESPECIALLY that the battery didn't get wet or damaged. For what happened, the vibration being gone is pretty minor damage.
Click to expand...
Click to collapse
I agree. I guess mad at myself because it was ok before the contact cleaner (d'oh). Oh well, maybe it will reduce some corrosion.
And thank you -Gilgamesh- Don't know how I missed that. I'll try that app as well.
I have a hard time contact cleaner as being the culprit. If it damaged electronics, then it would kind of defy the whole point? Not trying to argue, just seems like it would be the least likely thing to do it. Was it powdery or foamy or something? Maybe it clogged up mechanism, maybe try poking at it with a quetip or something to dislodge it? Or maybe the air pressure pushed some moisture further inside where it could do some damage? Either way, guess I'll make sure to stay away from using it myself anyway. >.<
WELL.. the electrical cleaner in question does say to re-lubricate any movable parts as the cleaner will most likely dissolve oil/lubrication. My guess is that this vibration motor was lubricated if only in a small way.
I agree, unless the phone was submerged in something KNOWN caustic or corrosive, then I would just dry it, and be done with it. (I do also have the new screen bubbles/ dead pixels after the cleaner too.) I read the stories of people submerging in high grade alcohol after the water based dunk so I thought what the heck and the mentioned area in the lower left- looked like a board to me- was sprayed (of course with battery out). I tested the stuff on paper and it was dry within seconds just from air. I sprayed the phone out with compressed air afterward and another few nights in industrial strength desiccant.
So now I'm wondering if I spray some lube (WD-40 just a drop?) into this area in the lower left (Vibration motor?) of course with battery out and adequate dry time?
Thanks for staying with me. I installed a few LED applications and now at least know how to set different ring tones for different contacts.
Of course I'm ecstatic that the display even works after the submersion. I was already pricing 6-700 phones and even thought of...dare I say it... downgrading.
-Andrew
I really wouldn't. WD-40 is high pressure, thus when the tiniest little squirt would prob end up coating most of the inside of the phone. With the battery out I doubt it would cause any shorts, but it may still cause via corrosion because of the chemicals. IF I were to use any type of lube on it, I'd use something made for moving parts, such as the little thing of oil/lubricant you get with a hair trimmers. That way you can easily just put a small drop. That being said, I have no idea what effect using such a product might cause. May fix it, or could permanently damage the phone. Never really tried anything like that.
Personally I would just cut my loses now. There isn't very much damage, and you don't know how much more damaged could be caused by doing something like this. Just my opinion.
Yeah probably best to leave well enough alone at this point. Working screen for the most part, everything else working, just a dead vibration mechanism.
Lesson to be learned for anyone searching- if you have no real reason to beleive the device will be corroded by the substance the device was submerged in... JUST DRY IT WITH DESICCANT! Like I said mine was on and streaming music when dropped, completely off when recovered. I thought it was shorted out for sure, or at least would have tripped some kind of fuse only to be known by verizon/ motorolla techs to be cheaply replaced for refurbished units.
Anyway... just glad to still have a working device. Now to live this down as the GF got a $0.01 droid 2 at the same time as i did, but hers works perfectly fine (I smell a sabotage in the near future.....)
-Andrew
HAHA good luck with that.
atothec said:
Hello. I hate to even make the post, but I do so love XDA-developers, and maybe somebody can help me out.I
-Andrew
Click to expand...
Click to collapse
cant help you on the vibration part but for the contacts, try going to the contact hitting menu button-->options-->ringtone
edit: i was beat to it, my internet was slow to load and saw no other posts but he OP lol.
-Gilgamesh- said:
If you look in the battery compartment, I think in the lower left, you can actually see the vibration motor. I would check and make sure that nothing is blocking it. However, I would venture to say that being that it is the only (powered) moving part and being it being so exposed, I would imagine that it would be the most likely to get short circuited or otherwise damaged by the water.
Click to expand...
Click to collapse
HA! Decided that id add a drop of wd-40 to the vibration motor. After re-reading gilgamesh's post here I remembered seeing a turbine like piece of metal spinning with the compressed air. I was thinking the very lower left where the main board is exposed, but this is pretty much to the left of the middle of the battery. You can see a white motor with gears on the output shaft and the "spinning metal fan blade...thingy"
so, I pull my battery and.... blue silica desiccant ball! Dunno how I missed it. Removed it with a pencil, battery back in, fire it up, success!
So now I just have what im guessing is some left over cleaner under the plastic screen, but it could actually be lcd damage. Ill just have to see if it ever evaporates.
Still in the running for luckiest unlucky droid 2 user 2011!
thanks again guys,
-andrew
Oops- double posted. Anyway moral of the story is use desiccant, but block all passages (I used cotton on the audio jack and port at lower left that goes to mainboard, but forgot the vibration motor.) And don't get any cleaner anywhere near the screen as it seems to have messed up my lcd a bit.
Also- if your vibrate stops working make sure that metal fan spins freely when you blow on it/ use compressed air.
-andrew
Congratulations!! Glad to hear it's fixed now!!
Yeah I think that award is going to you lol. Glad to hear you fix it.
Damn you're one lucky mofo...for being unlucky that is...
Sent from my Evo "Z" unit on xda app.
Actually, I would say the opposite. One of the luckiest. Dropped it in a pond and came out working perfectly, in the end.

[TOILET AGAIN]Another loser has dropped the SGS right there

Hey, guys. I know there are dozens of threads talking about that, but mine is quite specific. First, the toilet disaster highlights one-to-one:
- phone sitting by the sink, which is close to toilet
- stupid movement and there it was, Skype was on.
- took 3 seconds to ignore all the human dignity I'd had and took the SGS from the water
- removed a crappy silicone cover (this one saved me from a more serious accident) very fast and removed the battery as fast as
- towel, paper-towel, rags
- rice bowl
- youtube video showing disassembly instructions (pretty easy)
- contact cleaner
- rice bowl again
It worked perfectly 24 hours later! Screen on, sound ok... very easy device to open.
Everything was fine until I accidentally hit the voice search and the "sound level meter" didn't move.
Microphone is not working since then. Doesn't work for calls, video with sound, audio note... It works fine with the stock earphone though.
Yes, I restored to factory settings.
Yes, I reflashed and reinstalled the ROM.
When I BLOW (with my mouth) into the mic, nothing happens. But when I SUCK it, the michophone seems to "catch" all the noise. Is this a signal of hope?
I opened it again and sprayed a good contact cleaner, right into the mic. No changes.
ANY HELP WILL BE APPRECIATED!!!
Phone was placed on the sink with "Skype on". Hmmmm
jbdroid said:
Phone was placed on the sink with "Skype on". Hmmmm
Click to expand...
Click to collapse
Ayup...
Clearly the phone was deeply ashamed of what was going on and jumped into the open toilet to save your dignity.
You sucked on the Mic???
ew.
Sent from my GT-I9000 using XDA App
Skype, bathroom, sucking and blowing the mic... woah...
Its very nasty
Sent from my GT-I9000 using XDA App
Lol
I said "loser"...
Guys, rolling on the floor here, but any actual help?
Ahahahahahahahahah
Oh man grodiest i9000 thread ever.
Did you ever think about to replace the mic?? If ya say its easy to open the phone then you wont have problems to replace the mic I actually dont think its too expansive for ya. So actually its funny to read but I fell with ya. But you shouldnt use skype on the toilet my phone is waiting outside of the bath room, when I'm makin the big deal on the toilet xD
good luck dude
24 hours is way to short to remove water stuck between board and smd components. I think you fired it up to soon. Electronics dont repair themselves, once broken you need to replace parts to get things going again.
Only luck or a wallet can save you now im afraid.
Aww dude no way !!!.
I have had my fair share of phones falling into the loo, Luckily not with my SGS, but with my tocco and my spica.
My tocco survived after leaving it dry on the radiator for a day (on low low temperature)
My spica survived but needed a new screen. which was surprisingly cheap (not genuine part)
Just for my own amusement, Was it a number one or a number two you was doing at the time ?
Funny comments, But serious matter. Take their advice and leave it dry out a little more, You could of made it worse by powering it up. But lets not jump to conclusions just yet,
If drying it out for longer dont work. See if you can make a bit of cash by selling it for parts on ebay or similar.
Oh and is it on a contract ? if so do you have insurance ? or are you close to a renewal ?
Good luck, Hope you get a good outcome
azzledazzle said:
If drying it out for longer dont work. See if you can make a bit of cash by selling it for parts on ebay or similar.
Click to expand...
Click to collapse
- I'll always look at parts from ebay suspiciously now.
RedBeardThePirate said:
- I'll always look at parts from ebay suspiciously now.
Click to expand...
Click to collapse
Obviously you will have to mention the water damage.
But some people do buy broken / water damaged stuff.
Might not get a lot of money but it could be better than throwing it in the bin
My phone got drowned in the bottom of bag with a leaking water bottle, similar thing, phone worked but the mic wasn't 100% and the center button did not work at all. Purchased a replacement 3 button membrane they call it off ebay for $25 from UK. The mic is built onto this membrane. Funnily enough button started to work the day before it arrived but I will still replace the membrane just to know the mic is 100% as sometimes it comes across scratchy on the other end.
Hope all goes well for you.
dwyer125 said:
My phone got drowned in the bottom of bag with a leaking water bottle, similar thing, phone worked but the mic wasn't 100% and the center button did not work at all. Purchased a replacement 3 button membrane they call it off ebay for $25 from UK. The mic is built onto this membrane. Funnily enough button started to work the day before it arrived but I will still replace the membrane just to know the mic is 100% as sometimes it comes across scratchy on the other end.
Hope all goes well for you.
Click to expand...
Click to collapse
+1
I bought the flex cable keypad wich comes with the microphone. Just 10$ from HongKong. However, 3 weeks to arrive.
u could try drying ur circuit board in an ultrasonic dryer... should remove all the water from it...
Sent from my GT-I9000 using Tapatalk
Last time I flooded a phone (lake, beer, boat, he he), I used a food dehydrator. 24 hours in that gadget and all was well. Just last week my brother jumped into the water with his iPhone in the pocket. Same procedure and 24 hours later his phone lives.

Need reassurance!!!!

So I just dropped my beloved vibrant ok the toilet and need reassurance, anyone whos done it before, will it live? So far its working ok, random color spasms and headphone port sounded distorted for a second but stopped when I paused music. It hasnt happened in about 15 minutes and the phone fell about an hour ago and dryed for about 30 minutes. I ran it over with a bike before on accident and it still worked and I love this phone so hopefully it will survive. Anyway worst damage to happen to your phone and it still worked?
Sent from my SGH-T959 using XDA Premium App
Turn off your phone, take out the battery and put it in a bag of rice. Good as new in about 2 hours.
Sent from my ADR6425LVW using XDA App
Before you put it in rice, might want to clean the ports and anything that you can access with distilled water. This will hopefully prevent corrosion from rusty, particle ridden toilet water.
I was at an Ace Hardware where they were selling, for five or ten bucks, a plastic bag with some dessicant for wet-phone rescue. Rice or any dessicant should work fine. I would make sure no rice dust gets into phone.
If you have any kind of blower or compressed air, blowing it out gently on no heat first might be a good idea. Also, I would first take phone somewhat apart, remove battery, sim, sdcard. Dry loose parts by hand, then blow out phone, especially all ports and contacts.
Some kind of tuner-cleaner might be an option if needed.
Thanks guys I took the whole phone apart yesterday and air dryed/ blew air in to dry it out and its working great. Only issue is the volume down rocker doesnt work 100% I have to press it a couple times to make it work. Any way to fix that?
Sent from my SGH-T959 using XDA Premium App
your phone has been through hell haha!
unfortunately there isnt much anyone here can tell you. there are certain things you can do to get as much water out as possible like the rice trick, swabbing all ports, etc. but in the long run, theres really no way of telling if any water got in deep enough to go unnoticed/uncleanable, and actually reached a point where it could cause damage <--- and if thats the case, like Woodrube said, you may experience issues somewhere down the road, even long enough to the point when youve totally forgotten about dropping it in the toilet, and youll say "how come this started happening all of a sudden?"
sucks man, gotta be careful...i went to the bathroom one night to relieve myself, after 1 or 2 drinks , and for some reason i thought that holding my phone in the same hand that was aiming wasnt the worst idea ever......yup, i ended up pissing on my blackberry
sneakysnake16 said:
Thanks guys I took the whole phone apart yesterday and air dryed/ blew air in to dry it out and its working great. Only issue is the volume down rocker doesnt work 100% I have to press it a couple times to make it work. Any way to fix that?
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
If it was my phone, I'd get some tuner-cleaner and shoot it into the switch and hope.
TopShelf10 said:
i went to the bathroom one night to relieve myself, after 1 or 2 drinks , and for some reason i thought that holding my phone in the same hand that was aiming wasnt the worst idea ever......yup, i ended up pissing on my blackberry
Click to expand...
Click to collapse
Lol. No really I laughed out loud and these ladies sitting next to me turned and looked. Brings new life to the phrase "piss on blackberry".
Woodrube said:
Lol. No really I laughed out loud and these ladies sitting next to me turned and looked. Brings new life to the phrase "piss on blackberry".
Click to expand...
Click to collapse
100% true story...not my highest point haha, although it did ultimately lead to me getting my vibrant, so i guess it can be considered a win of sorts

This many be the last straw for me.

I noticed this after i used it for a few days, it happens RIGHT where it gets hot on the back, it sticks to something inside and then comes off, hence the click/sticky sound. This is ridiculous. Anyone else have this issue?
https://www.youtube.com/watch?v=uvM86LO6Fdo&list=UUh0w9UCsW4rJNRvOxLwV9qQ
On the phone with HTC, they tried to turn it into something I DAMAGED on the device, i wasn't having that. They shuffled me off to the tech support and there i demanded to speak to a supervisor. Finally I got an RMA and shipping instructions. Shipping this guy back tomorrow, so so so mad and disappointed at this device.
reinert012 said:
I noticed this after i used it for a few days, it happens RIGHT where it gets hot on the back, it sticks to something inside and then comes off, hence the click/sticky sound. This is ridiculous. Anyone else have this issue?
On the phone with HTC, they tried to turn it into something I DAMAGED on the device, i wasn't having that. They shuffled me off to the tech support and there i demanded to speak to a supervisor. Finally I got an RMA and shipping instructions. Shipping this guy back tomorrow, so so so mad and disappointed at this device.
Click to expand...
Click to collapse
same here at the same spot. I think I will RMA tomorrow
Not happening here, thank goodness. I have the very same model, granted just had it for 1 day (and not planning on "keep exploring" until I might actually reproduce the issue). :fingers-crossed:
Same issue new 32 gb white just got it hours ago. Also it is taking 10 hours to charge... really?
Now I finally understand what everyone means by a clicking sound... I'm on a black 32,nothing at all like that. Bummer bro
That definitely sounds like a defect. Thank God mine doesn't make that sound.
I bet after it gets really hot it might be melting something structural in the back. I don't have the issue, but maybe I haven't warmed it up enough.
Sent from the future...
The mine doesn't make that sound
I noticed that mine made the same noise, but it sounds like some adhesive is trying to stick, but is not strong enough. That would also explain why the sound comes when letting go instead of when pressing the device. So I pressed the back firmly. Now the sound is gone and I think the flex has become smaller too (could be placebo)
Message has been Baconized
I agree with Gormsen. Sounds like double sided tape that is just not sticking. The back seem super thin and that probably all that keeps it flat in the middle. I do have the flex but no noise yet...
It must be some adhesive melting when it gets hot, which causes it to unstick.. pretty pathetic.
jaju123 said:
It must be some adhesive melting when it gets hot, which causes it to unstick.. pretty pathetic.
Click to expand...
Click to collapse
Or, it could be that it's thoroughly pressed upon manufacturing. Pathetic? Nah, all products have some production errors.
The good thing is that we should be able to fix this, if we pull of the back cover, apply some stronger double sided tape and the put the back cover back.
We can do some hardware modifications, am I the only one who's excited about it?
Also with the extra space (due to the flexing) we will be able to fit a bigger battery, if one is made
Message has been Baconized
Gormsen said:
I noticed that mine made the same noise, but it sounds like some adhesive is trying to stick, but is not strong enough. That would also explain why the sound comes when letting go instead of when pressing the device. So I pressed the back firmly. Now the sound is gone and I think the flex has become smaller too (could be placebo)
Message has been Baconized
Click to expand...
Click to collapse
Not placebo. Mine was very bad to begin with. Several places on the back could be pressed in with a light finger and under the camera I had that sticky click. I did as you and literally pressed the tablet together firmly at all places. During this process there were several clicks as if the whole thing settled properly. Result. Zero flex and it now feels totally solid all around the back. I'm totally happy with it now since I have no noticeable lightbleed and everything works as expected. Good times! ?
Laz35 said:
Not placebo. Mine was very bad to begin with. Several places on the back could be pressed in with a light finger and under the camera I had that sticky click. I did as you and literally pressed the tablet together firmly at all places. During this process there were several clicks as if the whole thing settled properly. Result. Zero flex and it now feels totally solid all around the back. I'm totally happy with it now since I have no noticeable lightbleed and everything works as expected. Good times! ?
Click to expand...
Click to collapse
Sweet Ladies and gentlemen.. We have a cure
Anybody else who can confirm this?
Message has been Baconized
Gormsen said:
Sweet Ladies and gentlemen.. We have a cure
Anybody else who can confirm this?
Message has been Baconized
Click to expand...
Click to collapse
I noticed the sound when i unboxed it. Have tried to do so. But seems like my stick is not strong enough, and the sound remains. If this is really a stick issue. Then maybe try to heat it up and push the back hard to stick properly may solve the problem. Anyway I have initiated RMA so really dont want to fix it lol. fingercrossed to get a good device.
This isn't really anything new as my Nexus 7 was the same back in 2012. I gave it a good squeeze and its still creak free to this day. I did the same with my Nexus 9 and can confirm that I don't have any creaking, although mine didn't have that much creaking to begin with anyway.
Sent from my Nexus 9 using Tapatalk
I'm glad the op doesn't have the nexus 9 anymore.
chefdave12118 said:
I'm glad the op doesn't have the nexus 9 anymore.
Click to expand...
Click to collapse
Hi
reinert012 said:
I noticed this after i used it for a few days, it happens RIGHT where it gets hot on the back, it sticks to something inside and then comes off, hence the click/sticky sound. This is ridiculous. Anyone else have this issue?
https://www.youtube.com/watch?v=uvM86LO6Fdo&list=UUh0w9UCsW4rJNRvOxLwV9qQ
On the phone with HTC, they tried to turn it into something I DAMAGED on the device, i wasn't having that. They shuffled me off to the tech support and there i demanded to speak to a supervisor. Finally I got an RMA and shipping instructions. Shipping this guy back tomorrow, so so so mad and disappointed at this device.
Click to expand...
Click to collapse
Yes the exact same thing happens here, I've not played any games or had the device become hot, just expect it was like it from the start. This is typical HTC build quality, reminds me very much of the HTC One X and it's plastic back, just all done a bit cheaply.
In the iFixIt pictures there doesn't appear to be any sticky pads in the location this is happening, so it is probably just sticking unintentionally to the smooth plastic of the stick on NFC antenna in that location. As the whole back cover seems to default to be floating away from the internal chassis by a couple of millimetres, again typical HTC lack of attention to detail, then the back is going to do this, become depressed and sometimes stick to pop out again making a noise.
I'll personally live with it, it is a bit annoying, and I'd expected better at this price point, but it doesn't affect the functionality.
Regards
Phil
Firm press between both hands is the fix. You will hear and feel it lock. There are back clips that are not seated. Mine is solid and click/creak free now.

Categories

Resources