Related
Sorry guys but I need some serious help getting android to run on my htc hd2....
I have been trying to get android to run for the last 5 weeks+ but I have not even got close....
HSPL 2.08 installed.....
Tried mostly all android builds....
Tried every radio known to man in combinations with custom ROMs....."AND NOTHING"
Currently running....
HTC HD2 UK (LEO T858) 576 MB...
MANILLA VERSION: 2.5.20191914.0...
ROM: Energy.Leo.21683.Sense2.5.Cookie.2.0.DinikGlass.Nov.02.7z...
RADIO: 2.12.50.02.2...
SD CARD: SANDISK SDHC 4G CLASS 2...
Formatted the sd card with....SDFormatter V2.0 many times....
I follow all instructions from the professionals I.E the chefs....and also have been very patient with regards to letting android create its .img files sometimes leaving for hours at a time......
I have read copious amounts of threads relating to this issue, so I have not been lazy...... but all avenues circle back to the same conclusion "no android no work"....
The only thing that I possibly hindering me is my sd card, but some say that android runs smooth from these type of cards...so instead of going out and spending a fortune on a top of the range one I thought that I would post this thread first....
Is it something simple that I am missing........?
Please any help would be most appreciative......
same.. :/
Hi, i seem to be having a similar problem
I run haret and it seems to run through some scrolling text, then leave a blank black screen for ages at a time.
Have i too done something wrong?
Any help wud be greatly appreciated
Same...
Me too, the exact same thing. Have tried MDJ froyo rev 1.5, with S1 kernel and with Hastarin R8. Both types I get a black screen with HTC in green - but stays like that for upwards of 10mins.
Running:
HSPL: 2.08
Manila version: 2.5.20121412.1
Rom: kwbr topix 1.6.3
Radio: 2.15.50.14
Memory card: Sandisk 16Gb SDHC Ultra
Any help would be greatly appreciated.
http://forum.xda-developers.com/showthread.php?t=734335
the other thing you can do is get the android sdk, install adb, and watch the logcat, it shuld be obvious if it starts to loop, or copy the logcat and post it so someone can help you debug.
my guess, your card's corupted... try formating it to an ext4 file system, then back to fat32. or scan it on a linux box and see if it shows up corupted...
Thanks t1h5ta3....
I will give it a go....
i used to face the same issue. place the android folder in the root of your sdcard
and check your startup.txt for your android path
e.g set cmdline "rel_path=Android"
you've probably did it before....
So why not pay a little money and get a low end SD card for testing? That would tell straight away if there's a problem with the card.
I use a 16GB Sandisk class 2 with no problems and also have a 16GB Kingston class 4 that runs fine.
Never had any problems, except SOD (and there's a fix for that), with these 2 cards.
Both formatted Fat 32 with 32 kilobyte allocation size on a Win 7 machine.
Makes Sense.........
"Enough" is "Enough"
From my previous post I have purchased another SDHC card (TOSHIBA 8GB CLASS 4) for testing android and surprise surprise I am still getting exactly the same problem, not a thing in regards running android. Why is such a simple thing turning out to be so problematic, my head has finally dropped and I am losing the will to live.....?
Common Issues.....
whilst linux is booting android it will always stop at "SMD: ch 1 1 2 -> 2".......... ???????????? i have searched for this with little or no success.
And one thing that I find very confusing is the Startup.txt files... what should it actually say because many people have different opinions.....BOOT or BOOTLINUX ????
Can anyone please please please post a complete setup in regards of rom, radio,etc etc of there HTC HD2 (LEO) European version """(NOT A 1024)"""" running android, so I can compare and find out what the BL**DY hell is going on...
CURRENTLY RUNNING....
HTC HD2 UK (LEO T858) 576 MB...
OS VERSION: 5.2.28244 (28244.5.3.10
MANILLA VERSION: 2.5.20191914.0...
ROM: Energy.Leo.21683.Sense2.5.Cookie.2.0.DinikGlass.No v.02.7z...(13.nov.2010 WWE)
RADIO: 2.12.50.02.2...
SD CARD: TOSHIBA SDHC 8G CLASS 4...
ANDROID BUILDS TRIED....with no success
Mdeejay_eVo_Sense_v._2.3Revolution.7z
Mdeejay_FroYo_Sense_v._2.4.2_NextSense.7z
Mdeejay_FroYo_Sense_v._2.3_Clean_#15.7z
Mdeejay_FroYo_HD_v._3.7.7z
Mdeejay_FroYo_Revolution_v._1.1.7z
FroyoStone_Sense_V3.2.7z
mdeejay_froyo_sense_v2.2.7z
HD2Froyo_V2.1.7z
mattcleofroyo1.8.zip
mattcfroyosense1[1].7ppp.zip
WITH CORRESPONDING KERNALS AND ALL RADIO ROMS.....
Once again any help would be extremely appreciated....
The only other thing I could think of is that maybe it's the Windows rom that you're using. Haret Android actually makes use of bits and pieces of what winmo leaves behind in memory, and since you are running a rom with cht built in, it may be using the ram memory differently, storing different things in ram addresses that Android doesnt expect. I would back up your NRG CHT build (shouldnt be too bad using XDA_UC), and flash a stock rom or NRG's bare bones Android rom. If it doesn't work, at least it's one more thing you could cross off the list of likely suspects
franks77 said:
Sorry guys but I need some serious help getting android to run on my htc hd2....
I have been trying to get android to run for the last 5 weeks+ but I have not even got close....
HSPL 2.08 installed.....
Tried mostly all android builds....
Tried every radio known to man in combinations with custom ROMs....."AND NOTHING"
Currently running....
HTC HD2 UK (LEO T858) 576 MB...
MANILLA VERSION: 2.5.20191914.0...
ROM: Energy.Leo.21683.Sense2.5.Cookie.2.0.DinikGlass.Nov.02.7z...
RADIO: 2.12.50.02.2...
SD CARD: SANDISK SDHC 4G CLASS 2...
Formatted the sd card with....SDFormatter V2.0 many times....
I follow all instructions from the professionals I.E the chefs....and also have been very patient with regards to letting android create its .img files sometimes leaving for hours at a time......
I have read copious amounts of threads relating to this issue, so I have not been lazy...... but all avenues circle back to the same conclusion "no android no work"....
The only thing that I possibly hindering me is my sd card, but some say that android runs smooth from these type of cards...so instead of going out and spending a fortune on a top of the range one I thought that I would post this thread first....
Is it something simple that I am missing........?
Please any help would be most appreciative......
Click to expand...
Click to collapse
try my proven and tested method, very simple
HERE
The plot thickens
Thanks for the suggestion huggs....
I flashed Energy.Leo.COM2.Barebones WM Build.For.Android as you suggested and have been getting some strange results??????
Firstly because that particular build auto boots into android once you switch on your device with an sd card inserted it does not detect either my Toshiba micro 8GB or my Sandisk 4GB SD"HC" cards and says "NO STORAGE CARD HAS BEEN DETECTED"... although saying that I can open file explorer on my device and read both storage cards.....but the auto boot does detect my Sandisk micro 2GB "SD" card and auto boots android but Linux stops at line "usb: product_id 0xff9" and hangs......
Either my hd2 does not like micro "SDHC" cards or it is knackered......
I AM CONFUSED.COM
Thanks Jigners i have already tried your methord but i think something a bit more drastic is required for my device....
franks77 said:
Thanks Jigners i have already tried your methord but i think something a bit more drastic is required for my device....
Click to expand...
Click to collapse
since you have HSPL already
bootloader
connect to pc
Task 29
disconnect to pc
battery pull
bootloader
flash VBNDroid-Reloaded2Alt-21913-Oct08
format SD card
download [UPD][BUILD][18.11.10]|MDJ FroYo Sense Clean v. 2.4 [kernel: MDJ S6.1]
unzip
put the Android folder to your sd card
with device off - put sd card to device
boot
manually click on clrad then haret (do it fast, you must activate haret while
hardware keys are alight)
print that step by step guide, you can never fail on that.
jingers i preformed task 29 and i can not get my phone into the bootloader ?
Hi there,
One question to all of you having problems with Android. Do you happen by any chance to have extended battery?
I similar problems with Android. One day it worked and the next day it wouldn't and no matter what I did it just refused to work on any build I tried. I was so sure that it was because of the memory card that I even didn't think about the extended battery causing problems.
So if you try everything, including different wm roms, different android builds, changing sd cards and are totally at loss just try any rom with extended battery support or try changing the kernels that support one and then try again.
Provided you've got extended battery and are not too much experienced in Android issues I could bet that this is the cause of your problems.
hi rafian a good shout but no i am not using an extended battery.....
But is does not matter now because i think my phone is bricked after doing a task 29 because it will not enter the bootloader ??????????
Also because it is not entering the bootloader and all i get is the NRG flash screen from my preivious rom and that task 29 has not removed it am i right in thinking if i send my phone off to be repaired / replaced they will see that splash screen and know that i had HSPL installed and void my warranty ???????
I'm sorry to read it Frank. This is the worst case scenario ( .
WHY O WHY did i do a task 29......................
Got my HD2 to work
Hi all,
I also faced many problems in my attempts to make Android run on my HD 2. I got stuck on the startup screen (starting Linux kernel etc).
In the end irrespective of what the other form user stated, you need to install HSPL (article link provided below). Be warned, to install this I had to switch off everything (wifi, BT etc) but phone (and a reset was needed) and had to make sure on windows desktop that Windows Mobile Device Centre was able to communicate with phone BUT was not synching anything.
Once HSPL was installed I found out that my Radio ROM was too old. need 2.07... + (I had 2.06...) I then updated my Radio ROM thenTADA I am now running Android on my HD2.
Here is the link that resolved my issues.
http://forum.xda-developers.com/showthread.php?t=767513
Sorry everyone,
I am new in HD2 i just purchased it few months ago,
i read many threads about dual boot,
but till this moment i cant understand how to dual boot Android on Sd card ,
can any one support with any previous thread that can help.
I would try darkstones 1.5 ram build in this forum. Just follow the instructions.. If your a visual learner search youtube for running android on the HD2 which help you get a feel for what's going on. Can't say any of the android builds are 100% stable but neither is the stock windows mobile 6.5. Being the android build is just a couple of directories on the SD card, it's a simple matter to back them it up and experiment.. if it gets corrupted for some reason just copy the files back over from backup.
Just be sure to run the HSPL hack which will allow you to run different OS's on your HD2, and make sure your radio's are up to date.. I'm still run 2.10 radio (not the 2.15) so even mine's not totally up to date. If older than the 2.10 radio you might want to upgrade that first.
i tried the below android
http://forum.xda-developers.com/showthread.php?t=881937
everything is look great except that once Android boot a massage indicates that internal memory is full and i cannot do anything for that
i just resofted my hd2 and formated the sd card with my old android on it because i had too many stupid apps and it was annoying.
i resofted WMO and formated the sd card then downloaded darkstone SuperRAM FroYo v1.5 [kernel: Hastarin custom] which i had last time, copyed to sd card, made an HSPL3 and after i launched the android, the green logo appeared but after 4-5 seconds my phone rebooted and entered in the WMO. what seems to bee the problem?
Most likely the wrong radio. When going back to winmo rom, the radio is changed. you need a 2.xx.50.xx radio (2.08.50.xx or higher)
the radio was fine. and the problem is fixed, the "android" folder was inside of another "android" folder and that seemed to be the problem. everything works great now. thanks anyway
Hi,
I have been on this forum for the past 2-3 days trying to get android on my gf's HD2 and it just wont have it.
I have tried MCCM's HD v4 Desire one
I have tried Froyo 1.5
I have tried DL Desire Series, both SD and MAGLAR.
The ones where you click CLRCAD.exe then haret.exe either say it doesent have certificates to run or parts are missing. Or it goes to a black scree and gets stuck on "Jumping To Kernel" and it stays like that for ages (tested for 1 hour, never budged)
The DL desire series via MAGLAR wont work either, I need HSPL (sp?) to install MAGLAR but HSPL keeps reporting back that the file Rapi.dll is missing.
My SPL version is 1.42**** so technically thats right ( from what I have read )
I have tried formatting the SD card via PC and device, also tried a factory reset and an additional 2 other SD cards. Still nada.
What else can it be? Someone mentioned the radio but there is so many questions being asked in a specific thread that mine gets lost and since this is more of a global issue I thought a thread of its own is deserved
I really want this and will go to any length to get it ( not keen on ROM flashing thought, would like to avoid turning the handset into a hammer rather than a phone)
Hope I havent busted any rules
Cheers,
Gib
You need radio 2.14 or more for Android.
aka, upgrade your ROM.
You are not alone
You are not alone here.
I have been having this problem too, I get stuck on the HTC white screen. though I haven't tried much ROM but I have tried formating and reflahing of my WM ROM.
I once did a stock ROM official update with: (RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2 .15.50.14_LEO_S_Ship)
ever since I have not been able to find how to flash using SPL, I have been flashing using SSPL_RU and my radio is 2.15.50.14.
Could this reason be the problem.
I need help please I want to have a feel of droid.
Know the feeling
I have been trying all the different android magldr sd roms and everytime its the same story. First boot fine. Second boot and on it just hangs at the green htc logo. I have tried so many things i don't know what to do next.
Have you tried one of the Energy ROM's? I found on my unlocked HD2 that these were the only roms (going back a while now) that I could get Android running off an SD card. I've since heard that there is a basically blank rom for people who want to run nothing but android. It's a small rom, only about 30mb.
It's in a few places around the board. I can't remember what the name of that one is off the top of my head, but any of the Energy series, or the Miri ROM's apparently work too.
Good luck!
Gibbo3771 said:
Hi,
I have been on this forum for the past 2-3 days trying to get android on my gf's HD2 and it just wont have it.
I have tried MCCM's HD v4 Desire one
I have tried Froyo 1.5
I have tried DL Desire Series, both SD and MAGLAR.
The ones where you click CLRCAD.exe then haret.exe either say it doesent have certificates to run or parts are missing. Or it goes to a black scree and gets stuck on "Jumping To Kernel" and it stays like that for ages (tested for 1 hour, never budged)
The DL desire series via MAGLAR wont work either, I need HSPL (sp?) to install MAGLAR but HSPL keeps reporting back that the file Rapi.dll is missing.
My SPL version is 1.42**** so technically thats right ( from what I have read )
I have tried formatting the SD card via PC and device, also tried a factory reset and an additional 2 other SD cards. Still nada.
What else can it be? Someone mentioned the radio but there is so many questions being asked in a specific thread that mine gets lost and since this is more of a global issue I thought a thread of its own is deserved
I really want this and will go to any length to get it ( not keen on ROM flashing thought, would like to avoid turning the handset into a hammer rather than a phone)
Hope I havent busted any rules
Cheers,
Gib
Click to expand...
Click to collapse
Solution!
Instructions :
- Download the Android SD version of your choice. Unzip, Extract the 'Android' folder to root of your SD Card. (Make sure to Format the SD card before doing this.)
- After you have done all steps go into Android folder and tap CLRCAD (for working sound), and after that just tap HaRET
-Booting ..
-Enjoy
kottaho said:
You are not alone here.
I have been having this problem too, I get stuck on the HTC white screen. though I haven't tried much ROM but I have tried formating and reflahing of my WM ROM.
I once did a stock ROM official update with: (RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2 .15.50.14_LEO_S_Ship)
ever since I have not been able to find how to flash using SPL, I have been flashing using SSPL_RU and my radio is 2.15.50.14.
Could this reason be the problem.
I need help please I want to have a feel of droid.
Click to expand...
Click to collapse
Ater trying some nand roms i came back to the orignal firmware( the same as you).
And i also have this problem , it just load into a picture with htc on it.
Have you tried using a different SD card? My Sandisk 8gb didn't accept anything. I had an old 512mb laying around that came with my E90, loaded SuperRAM on it (aprox 450mb including data.img) and it booted straight away.
2.15.50.* is the right radio for most SD builds, make sure you have enough free space on SD. most builds have at least 512mb if not 1gb data.img which gets created when first boot. If runs out of space it will get stuck on boot screen. No hspl required with 3.14 HTC winmo rom
I also try to get Android in my HD2 (energy ROM). I am somewhat puzzled however: I want to flick back and forth between WM and Android and many programs I have reside onto my SD card. I have read in an earlier post that before attempting Android I should format my card - does this mean that I cannot have WM data (programs etc) in the same SD card I run android? or that I can transfer them back AFTER I manage (if) to load Android?. Thank you
The SD card has to be formatted in FAT32. Just to make sure the card is clean I copy all my data to my pc, format the card and transfer it all back.
Aesthetic said:
The SD card has to be formatted in FAT32. Just to make sure the card is clean I copy all my data to my pc, format the card and transfer it all back.
Click to expand...
Click to collapse
OK thank you - got it!
Unfortunately I cannot get passed the green HTC splash screen - my HD2 stays there for time no end and the only solution is to take battery out. Any suggestions?
Assuming you've got everything set up properly (right radio, hspl, ...) which you can find on the Android forum. I think you'll have to try using a different brand of sd card. Some cards simply don't play nice with Android.
Got uber annoyed with the SD method, just ended up doing a full scale flash to ROM. Was easier lol
MrAskani said:
Have you tried one of the Energy ROM's? I found on my unlocked HD2 that these were the only roms (going back a while now) that I could get Android running off an SD card. I've since heard that there is a basically blank rom for people who want to run nothing but android. It's a small rom, only about 30mb.
It's in a few places around the board. I can't remember what the name of that one is off the top of my head, but any of the Energy series, or the Miri ROM's apparently work too.
Good luck!
Click to expand...
Click to collapse
I am using Energy ROM (Energy Serie: Energy.Leo.28244.Sense2.5.Cookie.2.0.Feb.12)
My phone just hangs on the white HTC screen when I try to boot into Android from the SD card. I flashed my ROM with SSPL_RU after an update with the Stock ROM (RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship)
ehh
Aesthetic said:
Assuming you've got everything set up properly (right radio, hspl, ...) which you can find on the Android forum. I think you'll have to try using a different brand of sd card. Some cards simply don't play nice with Android.
Click to expand...
Click to collapse
I would almost agree with that except, i have 2 exactly the same 16 gb cards, each with a 3 gb fat32 primary partition. 1 loads android but wont allow me to do things like take pictures[it says there isn't an sd card.] The second card just hangs at the green htc screen. Even if I copy the working partition to the other card, it still hangs.
evo1rs said:
2.15.50.* is the right radio for most SD builds, make sure you have enough free space on SD. most builds have at least 512mb if not 1gb data.img which gets created when first boot. If runs out of space it will get stuck on boot screen. No hspl required with 3.14 HTC winmo rom
Click to expand...
Click to collapse
Thanks for this Info. I didn't take into consideration that the file will be enlarged during booting. The copied Android folder was 508MB in size but this got enlarged to about 1.3GB during boot up. I thought if I just leave about 1.2GB in all the SD card I have been trying that it should be enough. But I was wrong.
Thanks a lot I have done multiple reboot without any problem.
I am enjoying my first Android feel.
Thanks once again.
Android on HD2 hates most SD Cards
From my own limited experience to also having read many posts I can say that most sd cards prevent Android from running properly on the hd2. Mine works fine with radio 2.14/2.15 and the stock Sandisk 16gb card that came with my tmous hd2, but I recently tried a wintec 16gb card that made Android run like a broke-wheel-cart and other sd cards I have laying around make it fail.
I think everyone needs to add what card they are using to their signature, or else we might all just end up howling in the wind.
Based on some feedback from another post I just ordered this Sandisk 16gb card from Newegg. It is Model # SDSDQ-016G-A11M . It is reported that that model# provides class10 speeds even though it is sold as a class2. It's use with Android is supposed to be good.
Okay I have everything right here for the SD Android installation
ROM 3.14
2.15 Radio
HSPL 2.08
A properly fat32 formatted SD card
But no matter which SD build I try after hitting the Haret, it takes me to several lines and then to a htc screen and stays there forever.. Tried the Americandroid MccM BoxMax and the mixtheme build...
And Im sorry if this has been questioned in the earlier forums but I couldn't really see someone else having this problem, so sorry :/
But please Help
ty
cookymonster1 said:
Okay I have everything right here for the SD Android installation
ROM 3.14
2.15 Radio
HSPL 2.08
A properly fat32 formatted SD card
But no matter which SD build I try after hitting the Haret, it takes me to several lines and then to a htc screen and stays there forever.. Tried the Americandroid MccM BoxMax and the mixtheme build...
And Im sorry if this has been questioned in the earlier forums but I couldn't really see someone else having this problem, so sorry :/
But please Help
ty
Click to expand...
Click to collapse
Are you putting the Android folder in the root of the sd card? How much time are you Waiting ..first boot should take 5 or 6 minutes at least ..try another sd card too ..
Sent from my HTC HD2 using XDA App
did u run the clrcad.exe?
yugoport said:
Are you putting the Android folder in the root of the sd card? How much time are you Waiting ..first boot should take 5 or 6 minutes at least ..try another sd card too ..
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
by root of SD you mean; after formatting i just place it in the storage card directory right ? yes im doing that and i have a standard 4gb SD card
chalienge said:
did u run the clrcad.exe?
Click to expand...
Click to collapse
Yes Sir I am running the clrcad.exe first and then The Haret file plus Im waiting almost 2hours each time =/
format sd
put the folder 'Android'- not only its content but the folder itself to sd
clrcad
haret.
if it doesnt boot then hard reset phone and then do all the steps above again
Also,, regular hd2 or tmous? (I ask because 3.14 rom and 2.08.hspl on a regular don't mix, messes with the ram).
Also, for SD android the hspl and radio rules don't matter in the way they do for nand android.
As an aside, I only once got any haret based rom to load in a dozen or so attempts, and it immediately prevented the winmo rom from starting, forcing a hard reset.
mutil said:
format sd
put the folder 'Android'- not only its content but the folder itself to sd
clrcad
haret.
if it doesnt boot then hard reset phone and then do all the steps above again
Click to expand...
Click to collapse
samsamuel said:
Also,, regular hd2 or tmous? (I ask because 3.14 rom and 2.08.hspl on a regular don't mix, messes with the ram).
Also, for SD android the hspl and radio rules don't matter in the way they do for nand android.
As an aside, I only once got any haret based rom to load in a dozen or so attempts, and it immediately prevented the winmo rom from starting, forcing a hard reset.
Click to expand...
Click to collapse
Regular, not the tmous... So it is indeed not rare for the haret based rom not to load up in the first or even second attempt ? And will a hard reset really help ? I'll try hard resetting and then repeating the process
samsamuel said:
Also,, regular hd2 or tmous? (I ask because 3.14 rom and 2.08.hspl on a regular don't mix, messes with the ram).
Also, for SD android the hspl and radio rules don't matter in the way they do for nand android.
As an aside, I only once got any haret based rom to load in a dozen or so attempts, and it immediately prevented the winmo rom from starting, forcing a hard reset.
Click to expand...
Click to collapse
Not to cause confusion, but I've found this to be completely untrue. I was running a 3.14 ROM with HSPL 2.08 and Haret for ages, before deciding to give up on WinMo altogether and go to NAND. Everything worked fine.
@OP, have you tried different SD cards?
hey it worked... A simple change of a sd card worked... Tried two others, worked with the third one
thanks all you guys
Can a 3.14 stock TMOUS with 2.15 radio have a dual boot nand android?
No, if winmo is installed nothing else can be on the nand
Then, if I want to dual boot an android SD types are my only choice? I read a thread here stating that NAND is "hands down" better than SD types. If so, then could I still play games in an android SD build as fast as I could in a NAND build?
I recently bumped into this new android version rom
http://hd2apps.blogspot.com/2011/04/htc-hd2-apps-android-cm7-233.html
Like what I've said earlier, my TMOUS is a stock ver. 3.14 with radio ver. 2.15. The post in that blog says that that rom will work on a 2.08 or higher radio, but it stated that 2.12 is recommended, and and hspl 4.
Can I just install the hspl and leave the radio as is?
Bumping thread ^_^
In the Americandroid thread there's a video tut for installing and making the americandroid rom work. At the end of the video the specs of the phone used were posted, it was a 3.14 with a 2.15 radio so that answers my question, but now I have another. The video didn't make it clear whether the 3.14 rom he used was a stock or not, so my question is, can I have an SD android rom on a stock TMOUS winmo rom? Or do I really have to flash a cooked rom?
stock winmo rom is fine
Wow, thanks for the reply. I've been waiting for one in ages ^_^
Well, I tried. Funny thing though... first of, my sim was recognized but I can't seem to see any of my contacts. When I go to "my contacts" it says that I have to import it through accounts or something, but I can't find it anywhere. It says that I have to go to some menu and click on account and import.
Another thing is, when I restarted my phone to use winmo again, most of the programs I installed didn't work anymore like dutty's task manager and the resco file manager to name a few.
Any thoughts on this? I was thinking it was because of the stock rom I have. BTW, I don't have HSPL from what I remember. Just SPL.
Mate you better flash HSPL right now as it will save you from future headaches
yea hspl will save you from plenty of issues down the road
Thanks for the reps guys. I'll post the outcome of this.. thanks again ^_^
Oh, one more question. Does this apply to all SD android roms, or just the one I posted?
Ok, here's the outcome. I tried installing HSPL 2.08 as per instructions of almost all of the sd android rom builds I've seen. Please correct me if I'm wrong.
After installing HSPL 2.08, I noticed a big difference in my winmo. I hardly get any bars in my signal bar, hence, I can't text, I can't call and can't be contacted.
So I went back and installed SPL 3.03.
BTW, I have an unlocked TMOUS with stock 3.14 rom and radio 2.15, and now have SPL 3.03.
I would like to keep my stock 3.14 rom (or, if a cooked rom is needed I would like a closest to stock 3.14 cooked rom) and run an SD android rom. How do I do that? Is there an SD android rom out there that fits my needs?
Thanks for the help again.