Is it possible to access the EVRC-B menu and activate EVRC-B on the Fascinate?
Thanks in advance
I am interested in this too.
I saw the thread on the access menus, but not on how to access the programming menu.
Can anyone chime in ????
Okay here you go
****IF you BRICK your phone thats on you.****
**772
SPC code 000000
The bottom of the screen will have buttons that are directional like a d-pad.
Press down until you see:
SVC Mode NAM1
End of BASIC NAM
Exit
Press right once you will see EXIT change to MORE
Hit enter
Press Down once and you will See
HomePage VoiceSO
EVRC
Push right button to change to EVRC-B
Hit OK Phone will reboot.
Okay update hit enter after each change to EVRC all of mine have stayed at EVRC-B.
What can you do in this mode?
Sent from my SCH-I500 using XDA App
It changes the audio output of the voice codec.
Sent from my SCH-I500
None of these worked for me, and I'd really like to get into those audio settings?
Related
In my phone by pressing that key camera application is not getting opened , Cannot even capture a photo using that.
Is there any setting I have to change ?
felixpaul said:
In my phone by pressing that key camera application is not getting opened , Cannot even capture a photo using that.
Is there any setting I have to change ?
Click to expand...
Click to collapse
Well, i personally i have a shortcut to camera app on my screen and i'm using touch to capture.
I've never used that key ... but...
1. From what i know, on X10, pressing that key won't open the app.
2. To take a picture, press the button half down, wait for focus and then press all the way down.
thanks for your response
When pressing like that focus cursor (centre of display) turns green then goes off , but not capturing
to open the camera app with the key, press it all the way in, and hold it for around 3 seconds
to take a picture push it in halfway for the green focus to come up, then all the way in to take picture, simple
I did it but not working.
Dunno if this is a but obvious but are you pressing it hard enough?
I only ask because I have to press mine very very hard to actually capture.
Swyped from my rooted X10i using XDA.
Lord Takyon said:
Dunno if this is a but obvious but are you pressing it hard enough?
I only ask because I have to press mine very very hard to actually capture.
Swyped from my rooted X10i using XDA.
Click to expand...
Click to collapse
Agree, the button is just a bit to hard for my taste. But i can live with it
Sent from my X10i using XDA App
You probably are using a task-killer that is killing some process related to the button. Pressing the button opens up the Camera app. If it doesn't, you've screwed up a setting somewhere or killed a task unnecessarily.
Have you went into the test menu? (While in the lock screen, press menu > back > back > menu > back > menu > menu > back).
Then go to service tests, and find "Keyboard and switch" or something, see if it registers the button press. It should register half press and a whole press.
chris_knows said:
Have you went into the test menu? (While in the lock screen, press menu > back > back > menu > back > menu > menu > back).
Then go to service tests, and find "Keyboard and switch" or something, see if it registers the button press. It should register half press and a whole press.
Click to expand...
Click to collapse
Wow, I didn't know that! Thanks for sharing.
Sorry, I'm too lazy to read the manual.
Finally I found it , Thanks for all your valuable advise
Hey ,
Figured i'd start a tips and tricks thread where everyone can post. Ill start off with a few things:
Double tap alt and it locks you into the number and secondary keys.
Same goes for the shift key (arrow pointing up). Double tap is caps lock.
Anybody else got some goodones?
Sent from my T-Mobile G2 using XDA App
T-mobile Vision G2 tips and tricks
Hey ,
Figured i'd start a tips and tricks thread where everyone can post. Ill start off with a few things:
Double tap alt and it locks you into the number and secondary keys.
Same goes for the shift key (arrow pointing up). Double tap is caps lock.
Anybody else got some goodones?
Sent from my T-Mobile G2 using XDA App
Thanks so much for the tips this is my first slider phone and I really appreciate the thoughtfulness.
Hold the home key while running any program and it will pop up multi tasking. Hope it helps
Sent from my T-Mobile G2
When the keyboard is slid open but the phone locks you can use any key on the keyboard to unlock the phone.
Sent from my T-Mobile G2 using XDA App
How do you get a reboot? On the G1 it was a three key press. What do you do on the G2?
Sent from my T-Mobile G2 using XDA App
Hold search key to activate google voice search
Sent from my T-Mobile G2 using XDA App
Hold down alt and long press most keys to get an on-screen menu with more symbol options.
example:
ALT + (long press) j = [, {, <
ALT + (long press) k = ], }, >
If you go to the Swype page at http://swypeinc.com/tips-tricks.html there are a lot of good tips for using Swype that are not in the tutorial.
I use Swype when I'm typing something quickly and don't want to open the keyboard. These tips help a lot.
Also, most people probably know this but... The little dots on the bottom of the screen that shows you which home screen you are on... You can touch them instead of swiping to the next screen. Also if you hold-touch the dots it brings up a small view of all your home screens and you can choose one to get to it quickly.
Bishybob said:
If you go to the Swype page at http://swypeinc.com/tips-tricks.html there are a lot of good tips for using Swype that are not in the tutorial.
I use Swype when I'm typing something quickly and don't want to open the keyboard. These tips help a lot.
Also, most people probably know this but... The little dots on the bottom of the screen that shows you which home screen you are on... You can touch them instead of swiping to the next screen. Also if you hold-touch the dots it brings up a small view of all your home screens and you can choose one to get to it quickly.
Click to expand...
Click to collapse
Awesome didn't know that.
Sent from my T-Mobile G2 using XDA App
ubiquill said:
Hold down alt and long press most keys to get an on-screen menu with more symbol options.
example:
ALT + (long press) j = [, {, <
ALT + (long press) k = ], }, >
Click to expand...
Click to collapse
Damn! Didn't know that! Now the keyboard rocks even more!
denzelnuke said:
How do you get a reboot? On the G1 it was a three key press. What do you do on the G2?
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
Press and hold Power + Volume Down + trackpad
CaliLove310 said:
Press and hold Power + Volume Down + trackpad
Click to expand...
Click to collapse
Thank you so much for that! I was wondering how and couldn't get it to work.
It's probably in the manual huh? I never read those
Hanging up phone calls with power button
To me its a hassle not having a hard key end call button. Im not use to it yet but I just found out I can set my power key to end my calls wile im on the phone. I think its perfect.
This is how to do it.
Menu > Settings > Accessibility > You will be prompted to download a reader, just press cancel > Check "Power button ends call" and there you have it!
Not sure if anyone knew this.
if you use Launcher Pro you can actually make those quick keys useful. When you're in the assignment menu choose "Activities" (with the Launcher Pro icon) under "more". This will let you choose virtually any app process to launch with the key. For instance: I have one of my quick keys set to activate the Quick Compose feature in Handcent and another to open up the compose dialog in Tweetcaster. Waaaaaay more useful than just launching an app
ubiquill said:
Hold down alt and long press most keys to get an on-screen menu with more symbol options.
example:
ALT + (long press) j = [, {, <
ALT + (long press) k = ], }, >
Click to expand...
Click to collapse
Thanks for the tip! awesome!
btw, this also works by just long pressing letters
example:
(long press) e = e with all different accents.
(long press) n = ñ and other accents
The keyboard tip is pretty awesome
Sent from my T-Mobile G2 using XDA App
Anyone figure out how to type a carat (^) on the physical keyboard yet?
Sent from my T-Mobile G2 using XDA App
elracing21 said:
To me its a hassle not having a hard key end call button. Im not use to it yet but I just found out I can set my power key to end my calls wile im on the phone. I think its perfect.
This is how to do it.
Menu > Settings > Accessibility > You will be prompted to download a reader, just press cancel > Check "Power button ends call" and there you have it!
Not sure if anyone knew this.
Click to expand...
Click to collapse
I found that the other day and immediately enabled it lol. Gotta make sure I hang up before I start bad mouthing people.
Sent from my T-Mobile G2 using XDA App
my tip. get ADW.Launcher, LauncherPro, or Home++. and useful widgets like the signal strength which lets you know 3G or H network. switch pro is also awesome. make a customizable power control
for those of you that may be unaware:
you can add a Power Control widget to the homescreen (quick access to wifi / gps / bluetooth / screen brightness)...
also there is a Calender widget which displays any upcoming appts & a Google Voice Widget that gives you more functionality than the icon alone.
T
(The Telus Fascinate is more of US/VIBRANT (gsm/cdma) then a Verizon Fascinate)
Just to start. Yes I have exhausted my search before asking. I am looking to improve call quality by switching to EVRC B. However using
Tried: **772
SPC code 000000
The bottom of the screen will have buttons that are directional like a d-pad.
Tried: Go into the Dialer and enter *#83786633 then press the Home key
Go back into the phone dialer and enter *#22745927
Now a box will come up asking for the SPC code. Enter 000000
Press the Hidden menu Enable radio button.
I am erasing the first entry before entering the second and im not pressing send..... the spc box never pops up for either
However I can get into testing and long shut down button enabled menus, however I can't get into gps testing (mine works fine) or others.
All I want is to switch to evrc b and volume controls to see if it helps. There has to be a difference between the verizon and telus code dialers.
Any help is much appreciated!, love the phone, but it should be a phone first everything else second not the other way around.
Phone is a telus fascinate/vibrant, not rooted.
There has to be a way to set it where i can press enter on the physical keyboard rather than pressing enter on the touch screen.
It would be must more convenient to press enter to send.
Thanks in advance,
Adam
Pressing enter has the exact same function as on a computer.
In a login form there is only one line, as such when you .hit enter it will log you in after pressing it.
Yet on this forum or a txt message you can enter in more lines so the enter button moves on to a new line as it should.
So no, I don't think you can do that.
Sent from my DROID Pro using XDA App
...but I see AdamFerg's point..
I see AdamFerg's point..
On sms on other androids and in some apps anyway you can choose that enter is like send (think of chat applications, like google talk) so the option is there somewhere.
Yeah facebook does that too, hit enter to send.
Truth be told, it annoys me.
But hey, look into button remapper or whatever it is called.
I saw someone talk about it in a thread about using the side button for the camera.
Maybe it can work for this purpose as well? http://forum.xda-developers.com/showthread.php?t=1109235
Hi, all
before I update to lollipop, i can use '4g switch' app to lock at 4g network,
after updated, how can i lock at 4g network ?
Thanks.
mh323kimo said:
Hi, all
before I update to lollipop, i can use '4g switch' app to lock at 4g network,
after updated, how can i lock at 4g network ?
Thanks.
Click to expand...
Click to collapse
Open dialer. Type *#0011#.
Go to the top right and press the back button. Then, go to the top right again and press Key Input.
Type: Q and press okay. Then type 0000 in Key Input and press okay. Then you should see a service mode screen.
Go to UE setting and information --> Setting --> Protocol --> AS --> Frequency Lock --> LTE Cell Locking. Pick the LTE band you want to be locked in.
LTE-X said:
Open dialer. Type *#0011#.
Go to the top right and press the back button. Then, go to the top right again and press Key Input.
Type: Q and press okay. Then type 0000 in Key Input and press okay. Then you should see a service mode screen.
Go to UE setting and information --> Setting --> Protocol --> AS --> Frequency Lock --> LTE Cell Locking. Pick the LTE band you want to be locked in.
Click to expand...
Click to collapse
Is there easy way to toggle, app?
mh323kimo said:
Is there easy way to toggle, app?
Click to expand...
Click to collapse
try this...
http://forum.xda-developers.com/android/apps-games/widget-toggle-network-type-5-0-xda-t2945406