I just bought a used Vibrant with a sticky back button, and hoping a firmware update might fix it. Aside from the trouble getting Keis to install properly, when I finally got the phone connected, it ways this model can't be upgraded....any ideas how to flash a new version, and where to get the files? Thx
There are currently no updates for the vibrant
Should be one soon but no official word yet
Hmm, the guy at the Bell store said there was one for mine, and a coworker has a newer version than I do...he has i9000ugjh2, while I have I9000UGJG9 (guess I'm asking about Baseband, not Firmware? new at this stuff)..
Or, any other thoughts why my back button would be not working half the time? If I hit menu, the back button lights up and works fine, but sometimes I need to actually press the area to activate it..
Related
Please help out my coworker has a stock Hero on sprint and we are unable to update the firmware. I was able to update mine, our demo and one other co-worker's phone but on hers, every time I actually go into the firmware update it states no updates available. Sadly we work for a sprint store and hers is the only one giving us an error. I've already gone to the point of wiping the device to restore to factory but with no avail. Aside from having her swap out the phone at our repair center, I wanted to see if anyone has had the same problem and was able to get passed it. I saw a couple of posts stating to use the RUU utility, but on a stock rom that we already "RTN'd" I don't know how that would help. Any help would be greatly appreciated.
I've seen something similar. A coworker of mine just got a hero last week (after the MR release) and her phone shows the older software version but it will not recognize a firmware update is needed. I checked the phone's awake time and it was low, indicating the messaging app was not keeping the phone awake or draining the battery so I assumed it must not need the MR update even though it shows the old software version.
A couple others have metioned this... For some reason, some phones shipped with older firmware, version 1.22.651.1 instead of 1.29.651.1. Doing a hard reset on the 1.22 version wouldn't help, but updating the firmware to the 1.29 should. After that, check for the official MR.
You can find the file over here:
ftp://xda:[email protected]_Hero_C_Sprint_1.29.651.1_signed_release.exe
http://forum.xda-developers.com/showthread.php?t=559622
the guy at the sprint store (3rd party store) where i got mine from , his hero will not update or even flash back to the stock sprint ruu everytime it downloads the update and goes to apply it it shuts the phone down and thats it no reboot have to pull the batt to get it to power back on again
I had the same problem. I got my Hero on the first day it came out. Every time I tried to download the firmware update it would say no update available. Took it to the Sprint store and no luck either. They finally swapped out my original Hero for a new one and I was past my 30 days.
I tried different machines before I sorted the connectivity problem to establish connection to my device until finally my PC can recognise my device.
Now comes the next headache, after getting the connection established I clicked on firmware upgrade - it came up and displays some updates are available -
it shows my current version as:
(PDA)JE9/(Phone)JE9
available update as:
(PDA)JF4/(Phone)JF4
When clicked on 'proceed' - it brings up some warning for me to make sure they are fixed before I proceed further like power cables connected and some warning of not removing or doing anything during upgrade, after I check 'agree' it starts the download by letting me know that the binary files for the new firmware is being downloaded and after the dowload there seems to be a wait creating impatience for us as to what next...after a few seconds I can see the message above the progress bar saying that the upgrade process has begun..
I can see the screen on my SGS display come with the android logo on some work (like road construction work) and the message telling upgrade in progress do not disconnect...it stays in that state for around a minute...no progress in the progress bar....Now suddenly the PC says 'failed to convert to upgrade mode, try later' and even after stopping my phone continues to show the frozen screen with 'upgrade in progress' (getting us confused and scared and dont know if I can unplug - will this brick my device all sorts of question) until I shut down my SGS and reboot to see it is normal as before but whenever I connect for the firmware upgrade all that I know is I am pending new upgrade.
I am stuck and can't proceed further - I tried it many times with many machines no luck. Please anybody suggest a way out.
Some info on my device: Bought in UK, sim free phone from Singapore Singtel as I see the operator's animation in the startup screen.
Other details on firmware:
PDA:I9000DXJE9
Phone:I9000DXJE9
CSC:I9000OLBJE9
In the settings 'About Phone' carries details:
Version: DXJE9
Kernel: [email protected]# (does this mean the device is rooted already?)
I have another question since I saw somebody mention in another thread that whether he/she should do a european firmware upgrade or asian firmware upgrade - I still confused by this question as well, which upgrade will be pushed to you if you are using Kies as it is just one same application made available for download globally.
somebody please help me with the upgrade issue.
isn't there any dev who can help me on this, it looks like i am the only one experiencing this!!!
I don't think many people are getting the upgrade options via kies at the moment.
I'm not seeing it on UK JF3
so hope, there isn't an issue with my device. I am weary because this was purchased from an online site but purchased the device after checking it personally.
One more question, will an unlocked phone get locked after any new firmware updates?
Are sim free and unlocked phones follow different philosophy ie., after unlocking a phone does that become a sim free phone forever.
Second question, how does the OTA update work - if you are not tied to a service provider - does samsung send these directly to all sim free phones automatically, looking and searching for IMEI numbers? and will a rooted phone be allowed to upate to froyo or any official update (for example) via the official Kies?
thanks
There isn't any offical firmware updates, via Kies, and or any other method.
JaGuR said:
There isn't any offical firmware updates, via Kies, and or any other method.
Click to expand...
Click to collapse
Pls dont give wrong information. If you are suggesting something make it elaborate and clear.
I have clearly mentioned that I can see my current version as: (PDA)JE9/(Phone) JE9
Update available version:
(PDA) JF4/(Phone) JF4
thats what is displayed via Kies. I am also aware from this forum that some people can see the update whilst others dont see any.
Having said that, I was asking a techy questions as to whether a OTA upgrade or a upgrade via Kies from Samsung still happen if the phone is rooted and also if the phone is sim free and not attached to any service providers will the OTA upgrade will happen if so, is it based on IMEI number that will automatically be tracked OTA.
S
I was wondering if anyone found a solution to this problem? I am having the same problem.
I'm looking at this also.
after following this: (oh great, can't post links)
I had a problem updating to the official Foyo via Kies.
Finally got my PC to recognise the phone then started the update.
Phone screen went all green part way through and nothing was happening for about 20 mins so unplugged.
Phone would switch on but came up with a little picture on the screen and thats it.
so got it updated to JPM by booting into download mode and using odin. Took 5 mins once I downloaded all the files.
Hi Guys, I have had this phone for around a week now. I have it rooted and installed a T-mobile ROM. The problem I am having is that I cannot do the 3 button trick. I have been browsing the forums and everyone who is having this problem is told to exchange it.
Since I have a different ROM, and accidentally wiped my phone during the install not very smart on my behalf). My phone boots up with this ugly pink "stick together" logo and irritating sound.
Is there a download where I can change it back to the original one that came with my Bell?
I originally posted this in the Vibrant section and realized that more Bell users were over here in the forum. Sorry for the double posting.
ayy yai yai viejo... this is complicated.
Where are you in Canada?
try these methods that people have tried,
http://forum.xda-developers.com/showthread.php?t=754673&page=3
some of them worked, some of them not, but still should try it, to at least get it to Download mode, so you can flash it back to the stock JG9 or JH2 ROMs
I am unable to do the three button trick, but through ROM manager I can load other ROMs. I just don't know where I can download a stock ROM?
I am located in Calgary, Alberta.
good, at least you got that working
go to the ROM Manager topic in Development section and ask for help there for the ROM that you need to fix the phone.
Thanks for your input guys, I actually ended up taking at back and told them I accidentally loaded the wrong ROM. And without the three button enabled I was unable to flash it back to the proper ROM. Thus killing two birds with one stone. And now I have a device that has the 3 buttons enabled.
nice! good to hear that
Hi all, I'm new to XDA so hopefully someone can help me. I purchased a brand new unlocked note 3 N9000W8 in canada from a cellphone store on Monday Morning. The phone was great and worked without a hitch and had android 4.3 on it.
Later on during the day, there were numerous news headlines regarding a 4.4.2 was officially released. So i decided to do the software update. With failed attempts with the message "Your device have been modified, Software updates are not available"
I checked my Settings > about device > status > device status and it states custom or modified. I am unsure how this is possible thinking it was a brand new phone. After some in depth reading i powered off the phone and check the android download mode (power, home button vol down key combo).
It states device status: custom, firmware: custom, knox 0x1 (which meant my warranty was gone essentially). I proceeded to call the shop i purchased the phone at, and the manager said they buy the phones from the distributor which unlocks them before it gets in their hands. so it must have been rooted prior to me receiving the phone.
Long story short...i know its been quite the reading already my appologies. I used samsung KIES to backup the phone and it updated it back to the stock firmware 4.4.2. I was prepared to loose the root as i dont need it. More concerned about the warranty. With the device and firmware status back to original i can now do OTA updates, however
Problem i have now is after the factory firmware upgrade to stock, my sim no longer works on the network. Seems as if the device has a sim lock, but it never asked for one. A local cellphone shop in st.catharines said there might be an issue with the baseband after the official update.
before the update, i tried all the suggestions such as unmounting the sd card, wiping cache, using supersu to unroot.
Can anyone chime in on what the problem may be? I go to school here, so if all else fails i will have to go back to toronto where i purchased it, and have them figure it out. just a hassle for me to get there without a car.
i just realized this was posted in the wrong section of the forum. sorry mods, can it be moved to Q/A?
tedmonddo said:
Hi all, I'm new to XDA so hopefully someone can help me. I purchased a brand new unlocked note 3 N9000W8 in canada from a cellphone store on Monday Morning. The phone was great and worked without a hitch and had android 4.3 on it.
Later on during the day, there were numerous news headlines regarding a 4.4.2 was officially released. So i decided to do the software update. With failed attempts with the message "Your device have been modified, Software updates are not available"
I checked my Settings > about device > status > device status and it states custom or modified. I am unsure how this is possible thinking it was a brand new phone. After some in depth reading i powered off the phone and check the android download mode (power, home button vol down key combo).
It states device status: custom, firmware: custom, knox 0x1 (which meant my warranty was gone essentially). I proceeded to call the shop i purchased the phone at, and the manager said they buy the phones from the distributor which unlocks them before it gets in their hands. so it must have been rooted prior to me receiving the phone.
Long story short...i know its been quite the reading already my appologies. I used samsung KIES to backup the phone and it updated it back to the stock firmware 4.4.2. I was prepared to loose the root as i dont need it. More concerned about the warranty. With the device and firmware status back to original i can now do OTA updates, however
Problem i have now is after the factory firmware upgrade to stock, my sim no longer works on the network. Seems as if the device has a sim lock, but it never asked for one. A local cellphone shop in st.catharines said there might be an issue with the baseband after the official update.
before the update, i tried all the suggestions such as unmounting the sd card, wiping cache, using supersu to unroot.
Can anyone chime in on what the problem may be? I go to school here, so if all else fails i will have to go back to toronto where i purchased it, and have them figure it out. just a hassle for me to get there without a car.
Click to expand...
Click to collapse
When the distributor told you that the phone had been modified to enable an unlock, why did you say, "I was prepared to loose root as i dont need it"... the problem is fairly obvious, you had a software-unlocked phone and even though the seller told you that you would lose your unlock, you wiped it back to factory anyway lol...
honestly though, that's extremely sketch, lemme know that shop and I'll report them to BBB, you should never be paying for a cell phone that comes rooted unless your buying something from pacific mall, there are several options for you to unlock the phone, using software, hardware, or IMEI unlock codes
tedmonddo said:
...
Can anyone chime in on what the problem may be? I go to school here, so if all else fails i will have to go back to toronto where i purchased it, and have them figure it out. just a hassle for me to get there without a car.
Click to expand...
Click to collapse
You had a pre-rooted software-unlocked phone (that was originally network-locked). Your warranty to Samsung is completely void, you should get something in writing (or record on audio) from the guy that sold you the phone as to the warranty of the phone.
Other than that - you can buy a network unlock code for something like 15 USD or so.
So here's my problem. I have a Rogers 900W8 and I've played around with it. I rooted it with Phiztouch, flashed Fusion and Gapps and didn't like it. Flashed back to OEM and no issue. Tried installing a stripped down version of Lollipop and found it had issues so I gave up and decided to flash back to OEM. My OEM software is from Sams and now my background apps are Bell on the second round. WTF?? I've downloaded every "roger" labeled file from Sams and everyone flashes the same. (via ODIN of course). The only reason I care is because I still have a credit on my Suretap sim card I want to use and now it won't acknowledge it. Help please
reallyflyguy said:
So here's my problem. I have a Rogers 900W8 and I've played around with it. I rooted it with Phiztouch, flashed Fusion and Gapps and didn't like it. Flashed back to OEM and no issue. Tried installing a stripped down version of Lollipop and found it had issues so I gave up and decided to flash back to OEM. My OEM software is from Sams and now my background apps are Bell on the second round. WTF?? I've downloaded every "roger" labeled file from Sams and everyone flashes the same. (via ODIN of course). The only reason I care is because I still have a credit on my Suretap sim card I want to use and now it won't acknowledge it. Help please
Click to expand...
Click to collapse
Keep it simple, use the Kies software, put your phone in Download mode, connect to PC/Mac, and then select under tools, emergency firmware recovery. Should go ahead and restore phone to original rogers state.
I tried you suggestion, didn't work. It won't let me attempt anything
So I played around and figured out how to get Kies3 to do the emergency software install. Turns out it was my old laptop having a software issue with 32bit windows.... my wifes newer laptop worked perfectly.
Now, I've done process and seen the issue. When Kies sees my software it clearly identifies Bell as the carrier specific. When I start the firmware install, by serial number.... It shows that RWC is now selected to install. Following thorough, the software gets downloaded and installed and It's still Bell..... WTF? When I plug back in to Kies to confirm, sure enough.... BMC pops up. Am I missing a step? Like a battery pull at a key moment?
reallyflyguy said:
So I played around and figured out how to get Kies3 to do the emergency software install. Turns out it was my old laptop having a software issue with 32bit windows.... my wifes newer laptop worked perfectly.
Now, I've done process and seen the issue. When Kies sees my software it clearly identifies Bell as the carrier specific. When I start the firmware install, by serial number.... It shows that RWC is now selected to install. Following thorough, the software gets downloaded and installed and It's still Bell..... WTF? When I plug back in to Kies to confirm, sure enough.... BMC pops up. Am I missing a step? Like a battery pull at a key moment?
Click to expand...
Click to collapse
Download the oldest rogers firmware there is ..after installing it go to the dialer and type in *#272*imei# then select rwc then phone will do a factory reset then you will have rogers apps then just do the over the the air update via wifi.
Hope that helps!!