I upgarded my touch hd to 6.5 recently and now my GPS can not find the satalites.
Using Gmaps I set windows to auto - baud to 56000 and I have tried comms 0,1,4,6,8 without any joy.
Can HD with 6.5 work with GPS?
I search the forum for an answer but no luck either
Thanks
Ray
Well, iGO is working under 6.5.
And so does Google maps...
However, settings should be 57600 baud on COM 4 (at least thet's how they're set in my iGO)...
And you should use QuickGPS to get ephemerals...
No luck I'm affraid. Did all this and it will not find the satalites.
Thanks
blueisland said:
No luck I'm affraid. Did all this and it will not find the satalites.
Thanks
Click to expand...
Click to collapse
Hi blueisland,
Working perfectly on my Touch HD.
What I would do.
Since I don't know what rom you've put on your phone is get
HTC GPS TOOL http://forum.xda-developers.com/showthread.php?t=360477
and
GPS test from chartcross http://www.chartcross.co.uk/products/WM00002_details.asp
Now what to do:
Very important : sorry for the caps, GO OUTSIDE so no obstructions above the receiver
Start HTC GPS TOOL : go to 'function' -> 'mode' -> 'clear memory'
After that on the top 'open port' and 'start test' now you should see data coming in that window.
Now if you click on 'menu' (bottom right) you can click 'Satellite'. Normally you should see some bars which are the sats that show up.
You can close the appl if you see that.
Start GPS Test : not necessary but this one automatically searches for the com port and baute rate and also show the reception.
Let us know what happens.
Btw: After that you get that working GPSmoddriver is a very nice add on http://forum.xda-developers.com/showthread.php?t=571266
no more lag on iGO
Related
Hi,
Did anybody try to use GPSGate together with GarminQue?
I have a problem with GPSGate 2.5.0.210.
I installed it on HTC X7500 with WM6, the installation was perfect, I created input/output ports. On input I see "GPS data is coming in", then I created out "Virtual COM1/Garmin Emulator" and for the first time it shows "Running OK", but when I start Garmin Que and configure this port as GPS port, Que just says "GPS is Off". I tried to push button "Connect to GPS" but it doesn't help.
At the same time GPSGate shows "No clients connected" in output page.
I tried to create COM2 at the same time, tried to change COM1->COM9 but it doesn't help too.
If somebody has any ideas, please let me know.
Oleg.
Could be the QuickGPS messing around?
Try to unconfigure QuickGPS, is in the Start / Settings / System.
Once you unconfigure that, the hardware port for GPS on Athena/X7500 is COM5 at 4800, so you need to configure that in GPSGate as input (?) and then the virtual port you want to use as output... COM1 or COM2 are good choices. Maybe COM0 but some programs got troubles with that.
Other choice could be try to not to stop the QuickGPS and use COM4 as input and again COM1 or COM2 as output. Not sure if this will work. Other programs llike GPSBlue or GPSProxy allows to do that so you keep the quick finding of sats.
That´s the solution, majhong! How are you?
With search engine i found you and i tried to unconfigure quickGps (SIFenabler in A701). Now, Garmin Que, C-eMap and PTGMap run ok without problems of gps comunication. I`ve changed position of SIFenabler, from Start Up to Start Menu. Now quickgps don´t run i start of windows.
Best regards and thanks
Frank
Bcn
i use Garmin Que with GPS proxy program......works like a charm
mainsail said:
That´s the solution, majhong! How are you?
With search engine i found you and i tried to unconfigure quickGps (SIFenabler in A701). Now, Garmin Que, C-eMap and PTGMap run ok without problems of gps comunication. I`ve changed position of SIFenabler, from Start Up to Start Menu. Now quickgps don´t run i start of windows.
Best regards and thanks
Frank
Bcn
Click to expand...
Click to collapse
Here too? I'm glad helping you.
C U.
mahjong
While playing with Google Maps Mobile and HTC GPS Tool on WM6 side of the shift, I've got some reaction on COM port 8 with baudrate at 19200 and below.
2 times I had the impression, that Google Maps will show me the exact position after initialising the port. HTC GPS Tool (V. 1.1.1.0) hangs by open this port without any message.
What's behind this COM port 8 on WM6?
the GPS is on COM4 @ 57600.
I just tried using the HTC GPS tool with these settings but I continue to get a "Open COM Port Failed" message. Any tips on how you got that to work? Or is it only through Google Maps Mobile?
cp
cspelsor said:
I just tried using the HTC GPS tool with these settings but I continue to get a "Open COM Port Failed" message. Any tips on how you got that to work? Or is it only through Google Maps Mobile?
cp
Click to expand...
Click to collapse
I just flashed a rom where GPS works out of the box.
there will be a publicly available custom rom that will of course have it working too
sweeeeeeet!
I will wait with bated breath
sweet. gps enabled shift. can't wait for the rom. If there's some beta testing to be done, I can put my shift in line...
Installing GPS apps
@ CMONEX : just dropped you a PM, if you need betatester...
I just installed PocketReperion GPS Tracking and Photo-Uploading tool
( http://ww.reperion.com/newclient ) and pointed it to COM4 at 57600 baud, no joy (yet)
I also enabled the GPS settings ICON in SETTINGS to enable hardware on port 5, and make a virtual port 4. ALso no joy,
what are the registry settings to enable this GPS ?
Hi, i have a Htc touch Diamond and i have a problem with my gps.
When i go into the settings, then system and then external GPS i make the gps programport to com 4 and the hardware to com 3 and the baud- speed to 4800 ( have tryed serval hardware ports programports and baud-speed adjustments) but when press the OK button in the corner of the screen and go into the external GPS again, the programport is still on com 4 but when i go into the hardwareport it says (in the small box were you can choose com 1 - 9) "nothing" (it might not be the word in english because im am danish so i havent put it on english) Is there really a thing i have missed? and btw, i have tryed with and without the auto administrate GPS I really hope you can help me!
Kildenmaf
Leave the settings alone
Just connect to Com 4 at the default baud rate with your software.
djfuego said:
Just connect to Com 4 at the default baud rate with your software.
Click to expand...
Click to collapse
The com4 in programport or hardware?
The hardware tab is used only when using external GPS hardware. If you are using the Diamond's built-in GPS, it uses the setting on the Programs tab, and you can ignore the Hardware tab.
GeckoDev said:
The hardware tab is used only when using external GPS hardware. If you are using the Diamond's built-in GPS, it uses the setting on the Programs tab, and you can ignore the Hardware tab.
Click to expand...
Click to collapse
Okay, thanks
GeckoDev said:
The hardware tab is used only when using external GPS hardware. If you are using the Diamond's built-in GPS, it uses the setting on the Programs tab, and you can ignore the Hardware tab.
Click to expand...
Click to collapse
but should the auto at the last page be or off?
kildenmaf said:
but should the auto at the last page be or off?
Click to expand...
Click to collapse
I have it on (checked). I have only used the GPS with Google Maps, and it works fine for me. The settings in Google Maps are to let Windows control it.
hmmm
okay thanks again
Is possible to have TomTom as a defalut navigator with Footprint? What & where are the value to change in HKLM.
In few words i wish to start tomtom when tapping a footprint image in footprint Tab ( and not google maps )
thanks
enrico
3nr1c0 said:
Is possible to have TomTom as a defalut navigator with Footprint? What & where are the value to change in HKLM.
In few words i wish to start tomtom when tapping a footprint image in footprint Tab ( and not google maps )
thanks
enrico
Click to expand...
Click to collapse
- create in the registry
1. Go to HKEY_LOCAL_MACHINE\Software\HTC and add new key NaviSW
2. Go to HKEY_LOCAL_MACHINE\Software\HTC\NaviSW and add new string value
Value name: MiddleLayerDLL
Value data: NaviSWMiddle_TomTom.dll
- after that take a Soft Reset
All done but when tapping navigate to my pda hangs & I've to soft reset
are theese settings corrects?
Value name: MiddleLayerDLLValue data: NaviSWMiddle_TomTom.dll
thanks
enrico
I can confirm that this works - at least it did for me with TT7!
TomTom should already be running in the background for this to work. This is very annoying as who wants TomTom running in the background.
chavonbravo said:
TomTom should already be running in the background for this to work. This is very annoying as who wants TomTom running in the background.
Click to expand...
Click to collapse
Hi,
Is this true?
As a check I've just performed a soft reset to ensure that nothing is running and then selected the M2D Footprints tab followed by Menu -> Navigate To.
TT7 then fired up (indicated by the TT7 splash screen) before going off to look for a valid satellite signal.
Please correct me if I'm wrong but I think that TT7 wasn't running in the background until the menu selection launched it.
Neil
huh, well, i guess i had something wrong with my setup then.
my tomtom wont's start,
when i select with footprint an image and then Menu -> Navigate To seems that somthing wants to start ( windows loading logo appears ) but after a few seconds all is out of work , i've to reset the phone
neila said:
Hi,
Is this true?
As a check I've just performed a soft reset to ensure that nothing is running and then selected the M2D Footprints tab followed by Menu -> Navigate To.
TT7 then fired up (indicated by the TT7 splash screen) before going off to look for a valid satellite signal.
Please correct me if I'm wrong but I think that TT7 wasn't running in the background until the menu selection launched it.
Neil
Click to expand...
Click to collapse
I confirm that tt7 freeze if start from navigate to. But if running in background this work fine.
Please neil can you share your configuration indicate your rom ?
Thanks
what version are you using of tomtom
Hi
I use TomTom versione 7.915 (9196) from IOLITE.
Previous versione work ok (7.910).
Thanks
Daniele
Has anyone managed to get TomTom 7.915 working correctly with any version of Footprints on a Polaris ?
EDIT: OK so it seems TomTom 7.915 just will not work correctly with Footprints. Turns out Tomtom 7.910 DOES WORK perfectly, the only thing you are losing out on is 'navigate > to > photo' in Tomtom 7.915 (but who needs it because that was footprints is for)
I have attached, what should be, the HTC version from Diamond (slightly modified to work with other devices).
EDIT 2: Ok so I cant seem to upload the file. I have saved it to my 4shared here
hello....can anyone help me...i hav HTC TOuch 2 (T3333) internal GPS, but i can't activate GPS, how to activate it?
ur GPS IS activated , but u need a program which uses it ! it is mapped to port 4 and baud rate could be 57000. what do u want to use it for ? navigation ? get iGO8 or TomTom
LtBlue said:
ur GPS IS activated , but u need a program which uses it ! it is mapped to port 4 and baud rate could be 57000. what do u want to use it for ? navigation ? get iGO8 or TomTom
Click to expand...
Click to collapse
i has try igo8 but always eror in first instalation T_T
how to set baud rate?
in tab hardware?every i'm change baud / port after clik OK (to save i think), on hardware tab port back to (none) and baud rate back to 4800
:O could u be more precise ?! anyone else understood and have a solution ? make settings only in iGO , the phone itself is alredy OK !
1. find QuickGPS from Start manu, click and download a loccation file
2. use Google Map, and 'enable GPS'
3. under clear sky, and allow time for first time connection
4. if no luck, try a hard reset to factory default and try above again
GPS with other programs
the internal GPS is working only with google map but when i try to download free gps applications or do my own, it doesn't retrieve any values.. what's going on ?
sherifsurf said:
the internal GPS is working only with google map but when i try to download free gps applications or do my own, it doesn't retrieve any values.. what's going on ?
Click to expand...
Click to collapse
Hi, go to Start -> Settings -> System -> External GPS (or similar, got a non-English Touch2) and check the settings for GPS.
Use this settings in your programs/apps, then it should work.
Hope this helps,
Greets,
Touch2er
hi i have the same problem , i used Garmin , and navitel and ozi explorer but none of them seemed to be worked it just works with google map and i think it is cuz of a-gps, what should i do ??? Thanks for the help