Database Users

Possibly bricked MyTouch Black non-1.2

After putting a new kernel on my device running cm 6 RC1 and supposedly clockworkmod recovery latest, I now do not have a working phone as it stops at the mytouch screen and does not go further, only thing available to use is fastboot which to my dismay, I am having the perfect spl error (remote: not allow), any insight in this problem would be much appreciated.

Trunekind said:
After putting a new kernel on my device running cm 6 RC1 and supposedly clockworkmod recovery latest, I now do not have a working phone as it stops at the mytouch screen and does not go further, only thing available to use is fastboot which to my dismay, I am having the perfect spl error (remote: not allow), any insight in this problem would be much appreciated.
Click to expand...
Click to collapse
Just reboot into Clockworkmod Recovery and flash a new rom and the old kernel

Clockwork recovery sometimes doesn't flash correctly through rom manager. Try downloading among RA's recovery and doing "fastboot flash recovery recovery.img". You will need an engineering spl though.
Sent from my HTC Magic using XDA App

Something went wrong. I don't know why all you new android nubs have to use "clockwork or "sp" recovery. A good ol Recovery image like Amon Ra's latest 1.7.0G works great. Anyway, you didn't brick the device. Just try re-flashing or flashing another rom. (one you know for a fact works) Oh, if you did a nandroid backup, I suggest you restore it. And if you can't get into "clockwork" recovery upon boot. Then I suggest you do what @caedus90 advised and flash Amon RA's recovery through ADB.
Hope this helps. And stop using those idiot friendly recovery alternatives. =P
later

xIoNiCx said:
Something went wrong. I don't know why all you new android nubs have to use "clockwork or "sp" recovery. A good ol Recovery image like Amon Ra's latest 1.7.0G works great. Anyway, you didn't brick the device. Just try re-flashing or flashing another rom. (one you know for a fact works) Oh, if you did a nandroid backup, I suggest you restore it. And if you can't get into "clockwork" recovery upon boot. Then I suggest you do what @caedus90 advised and flash Amon RA's recovery through ADB.
Hope this helps. And stop using those idiot friendly recovery alternatives. =P
later
Click to expand...
Click to collapse
OMG...I feel so dumb right now...I don't know why I didn't just stick with Amon's recovery...I got curious too and try to use Rom Manager to play around and now I am stuck as well...but my case is a little different in that I cannot get into recovery BUT my phone still boots right into Android like normal...
I flashed Amon's recovery via Rom Manager but still cannot get back into recovery...flashed ClockworkMod recovery but still no recovery...
So advice, please...I think I've learned my lesson and stay with the manual work from now on...lol...I was totally fine with Amon's recovery too...guess my curiosity will kill the cat eventually if I don't wise up...
What's the best way to get recovery back? I have Cyanogen's CM6 on my mt3g 32b...Much thanks for any advice...
UPDATE: Just thought I let you guys know that I was able to get Amon's recovery to work again by keep trying the reflash while in Rom Manager thanks to a tip from another member...Last time I'm touching Rom Manager...It's not a bad program, just us users who are causing problem...

[Q] Changing recovery

I'm currently running CM6 with ramon recovery on my 32b magic and each time I flash a new nightly it comes pre-installed with Koush's Rom manager.
Would it be a simple case of installing clockwork recovery through the rom manager as it suggests or do I need to remove Ramon recovery first?
Has anyone had any success with Clockwork recovery on the 32b magic?

There's no reason it shouldn't work without removing recovery. However I've heard lots of people say clockwork didn't install right so they were left without recovery. Before flashing it, make sure you have a fastboot capable SPL (2010/'09/'05/'04) so you can boot in to the SPL and flash the recovery image from there, should the need arise

It is that simple, and I have had great success with Clockwork Recovery and ROM Manager.

[Q] Help Please recovery problems rooted stock rom

Okay, so where to start...
I have a MT4G (of course) i love it dont get me wrongand wanted to mess around with it. i permarooted it via VISONary + and everything was working fine. i wanted to flash a different kernal and wanted to do a nandoird backup before i did anything else. but i needed clockwork to do this (correct me please if im wrong) so i downloaded rom manager flashed it. and went to boot into recovery and it does this icon with a phone and a "!" on the screen...it cant boot into recovery. and i dont know why, and now i just want to go back to my stock recovery but i cant cause i dont know how. ive tried terminal commands... and i tried to learn adb and fastboot but am very lost. basically i want a nandroid of my rooted stock ROM... any help would be much appreciated

The reason is because you need to turn s=off for any of those to work.
Sent from my LogicPD Zoom2 using Tapatalk

how do i do that?

drpepper4lf said:
how do i do that?
Click to expand...
Click to collapse
Read the guides.

1. The phone with the red triangle icon is from the stock Recovery program. Stock recovery does nothing except show you that screen, unless a special file is found on the SD card, used for a complete system restore. Your flash of ClockworkMod Recovery was unsuccessful.
2. When you do go get past the S=Off phase, and are ready to once again attempt to install CWM Recovery, be sure you install the CORRECT version. CWMR 3.0.0.5 is for Gingerbread (Android 2.3) based ROMs only! Don't install 3.0.0.5 expecting it to function properly for the Stock ROM, for Iced Glacier, or any other Froyo (Android 2.2) based ROMs. Those all require CWMR 2.x. A higher version number does not mean better. For example, if you are planning to install CM7, back up with CWMR 2.x, then flash CWMR 3.x before installing CM7.
(There is a special, unique to MT4G version of CWMR that handles both Froyo and Gingerbread ROMs, called "3.0.0.6". You can find threads on it in the Development subforum.)

[Q] Do I have a brick?

I was running CM7 RC3 fine on my phone, then I decided to switch back to my nandroid backup to stock ( I have done this wil ICed glacier/CM7 RC2/RC1/Royal Ginger etc with no problems). And I have been stuck on the boot splash screen the "Tmobile Mytouch 4g" screen for 20 minutes now without any action... is this a brick? I know I should not worry, but I tried wiping the dalvik cache the acahe and reset to factory setting.... still nothing
How do I go about getting the phone to work?
Thanks

are you running recovery 3.0.0.6? have you tried a battery pull?

Yes, a battery pull was tried, and I am running 3.0.0.5... any help is really appreciated

How do I possibly install 3.0.0.6 now? is it possible?
Thanks

need 3.0.0.6 to run stock or royal glacier. or 2.5.1.2. need to reinstall cm7 and use rom manager to flash recovery. or at least its the eaisest way for me.

follow drews guide and let us know how it goes. http://forum.xda-developers.com/showthread.php?t=944681

unfortunately, I am not being able to go back to royal ginger (its on the toyal ginger splash screen now) I am downloading CM7 RC3 again, but have no way to put it on the sdcard coz I do not have a card reader at this point....... so frustrated.

you can use recovery to mount usb and it will mount the sd card and can tranfer files from computer to card. if you can get to recovery its not bricked. make sure you format boot sys data and cache in mount screen before trying reflash.

Push the cwm 3.0.0.6 recovery image to your phone via adb
Sent from my HTC Glacier using XDA Premium App

Google easy way to get 3.0.0.6 and it should be a zip file u flash in recovery called clockwork_recoveries.zip or something like that. You go into rom manager pick all recoveries and flash 3.0.0.5 and reboot into recovery and it should say 3.0.0.6 now u can flash any rom and restore without getting stuck
Sent from my HTC Glacier using XDA Premium App

Your phone is not bricked. As others have stated, you need to re-flash a gingerbread ROM (like CM7) in order for it to boot.
Best thing to do is install ClockworkMod Recovery version 3.0.0.6 because it can flash both gingerbread and froyo ROMs. You can do this in two ways:
1. Re-flash a Gingerbread ROM. Download TrueBlue_Drew's .zip file from his thread in Development and follow his instructions to be able to flash the included recovery images from ROM Manager.
2. If you have the engineering bootloader (0.85.2007, also some people call it ENG SPL), and if you've set up ADB on your computer, then you can use the fastboot utility to flash recovery images directly to the device. I personally prefer this method. If you can't find instructions to do this, PM me.

[Q] replace StockRom Recovery with CW recovery in stock rom ----- ( PLEASE REPLY )

is it possible to replace official recovery with clockwork recovery in stock rom?
i have a goldcard but it does not let me sappimg roms different from my stock rom.
i donot have a cw or amon recovery. i need the recovery to get the engineering spl.
since only my stockrom can be sappimg'ed, how can i get the clockwork recovery by replacing My stockrom's original recovery with the cw/amon recovery??
can it be done??
thanks.
-------reason...
i had 3.22 radio, but i flashed another stockrom (htc europe 3.05 rom) which was devided in rom and rom1 files. i flashed rom1, sys,userdata,recovery. rom file had hboot,boot and radio 6.35.
i was unable to flash rom file (hboot,boot and radio 6.35) because when radio starts updating, the screen starts changing colours to grey for, like, 40 minutes (does this normally happen??)
now i have old radio, incompatible hboot/boot file- to correct it, i need Recovery
---EDIT---
MY phones stuck in hboot mode, i have no other option except goldcard, but what about what i have written, does it work?

Download rom manager from the market, although depending on your rom it may not be available (android 2.1) if not download it off Google by typing, rom manager.apk. Once installed you can add the new clockwork recovery or the RA recovery via the application, they both work fine. Hope that's helped!
Sent from my HTC Hero using XDA Premium

You can, but i suppose that Amon Ra is better than others.

I would also suggest same solution as Tenpin wrote. Rom manager and it allows to change recovery (I suggest Amon Ra as well).

If you do get your phone sorted, remember the stock Rom reflashes the stock recovery every time you shut your phone down.
Also, I believe if you extract the proper signed Rom.zip from the ruu and put it on your sdcard and press volume down when in fastboot, it should search for and flash the Rom.zip. At least then you will have a Rom to boot into to flash a new recovery.
My old hero messed up once too, I would seriously recommend flashing the s-off bootloader, makes recovering from errors such as this so much easier.
Sent from my GT-I9100 using XDA App