Related
I seem to be not able to receive or send mms with the rom! I know with hayukaro's roms it wasnt able to either.... this supports right? i dont have hte data plan and had to change tmobile us to...
Name: T-Mobile US
APN: wap.voicestream.com
proxy: 216.155.165.050
port: 8080
Username: not set (delete everything in this field)
Password: not set (delete all here too)
Server: not set (delete the *)
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.155.165.050
MMS Port: 8080
MMC: 310
MNC: 260
APN type: not set
still doesnt work, it sends about like halfway then stops?? i even took sim card out and nandroid backuped to jf's rc33
I am experiencing this MMS problem too; it works well for a while and then there's some messages I have to resend over and over up to 5-6 times before they go through if at all.
AF9210 said:
I seem to be not able to receive or send mms with the rom! I know with hayukaro's roms it wasnt able to either.... this supports right? i dont have hte data plan and had to change tmobile us to...
Name: T-Mobile US
APN: wap.voicestream.com
proxy: 216.155.165.050
port: 8080
Username: not set (delete everything in this field)
Password: not set (delete all here too)
Server: not set (delete the *)
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.155.165.050
MMS Port: 8080
MMC: 310
MNC: 260
APN type: not set
still doesnt work, it sends about like halfway then stops?? i even took sim card out and nandroid backuped to jf's rc33
Click to expand...
Click to collapse
Has anyone with USA tmobile been able to send an MMS. I can receive them, but they don't seem to want to send at all. Any workaround to this?
Silenced said:
Has anyone with USA tmobile been able to send an MMS. I can receive them, but they don't seem to want to send at all. Any workaround to this?
Click to expand...
Click to collapse
I'm running dan1j3l LeoFroyo Sense RC1, and I've got the same issue. I'm pretty sure they know about it...it's one of the bugs yet to be worked out. In the meantime, I've just been attaching pics to an email.
+1 on this. Its not a show stopper but it sure is annoying. I know I can't expect full functionality yet...
Sent from my dang WinMo phone using an Android application
Silenced said:
Has anyone with USA tmobile been able to send an MMS. I can receive them, but they don't seem to want to send at all. Any workaround to this?
Click to expand...
Click to collapse
I have tmo usa and mms working fine in and out for me on darkstone froyo, on hspa and edge. are your mmsc settings under the apn set correctly? should be MMSC: http://mms.MSG.eng.t-mobile.com/mms/wapenc. hope this helps.
84Gti Guy said:
I have tmo usa and mms working fine in and out for me on darkstone froyo, on hspa and edge. are your mmsc settings under the apn set correctly? should be MMSC: http://mms.MSG.eng.t-mobile.com/mms/wapenc. hope this helps.
Click to expand...
Click to collapse
I also am using darkstones froyo and cant get mms to work... have tried i think all the setting. i searched and searched with no luck
84Gti Guy said:
I have tmo usa and mms working fine in and out for me on darkstone froyo, on hspa and edge. are your mmsc settings under the apn set correctly? should be MMSC: http://mms.MSG.eng.t-mobile.com/mms/wapenc. hope this helps.
Click to expand...
Click to collapse
Thanks for the help, but I do have those settings. Still not working unfortunately.
Sent from my HTC Desire using XDA App
I tried both dan's and darkstones's froyo builds. I can only receive but not send.
Could this have something to do with tmobile? maybe a reset of some sort?
Just to let everyone know. I am using a T9193 with ATT. No matter what android build I try I have the same issue. I can receive MMS but not send MMS. So I don't think it is a T-mobile issue only.
I can sent and receive them if my internet in on.
I have the same problem. But someone on the other thread said a different rom like the miri 17.6 fixed it. I still haven't tried it myself tho.
doing a little research about the builds and this question would be answered.
outgoing mms is not working quite yet on most builds. just sit tight.
It's working just have to get your apn right, just got mine working 10mins ago from the thread here
Sent from my HTC Desire using XDA App
^ thats not for everyone
MMS Settings
I have Darkstone Froyo V1, with Cotulla 8/3/2010 zImage, an i was able to get my MMS working, these are the settings i have using:
NAME: T-Mobile US
APN: epc.tmobile.com
PROXY: Blank
PORT: Blank
USERNAME: Blank
PASSWORD: Blank
SERVER: wap.voicestream.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS PROXY: 216.155.165.050
MMS PORT: Blank
MCC: 310
MNC: 260
AUTH TYPE: Blank
APN TYPE: default,supl,mms
After you set it up, reboot back into Android then connect to a Wifi network sent out an MMS then Disable Wifi and try sending another MMS via the Mobile Network, Also this assuming you have T-Mobile US, if it does not work try these settings.
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.155.165.050
Port: 8080
Username: (leave this blank)
Password: (leave this blank)
Server: (leave this blank)
MMSC: http://mms.msg.english.t-mobile.com/mms/wapenc
MMS Proxy: 216.155.165.50
MMS Port: 8080
MCC: 310
MNC: 260
APN Type: (leave this blank)
Hope this helps!
jada'sworld said:
I have Darkstone Froyo V1, with Cotulla 8/3/2010 zImage, an i was able to get my MMS working, these are the settings i have using:
NAME: T-Mobile US
APN: epc.tmobile.com
PROXY: Blank
PORT: Blank
USERNAME: Blank
PASSWORD: Blank
SERVER: wap.voicestream.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS PROXY: 216.155.165.050
MMS PORT: Blank
MCC: 310
MNC: 260
AUTH TYPE: Blank
APN TYPE: default,supl,mms
After you set it up, reboot back into Android then connect to a Wifi network sent out an MMS then Disable Wifi and try sending another MMS via the Mobile Network, Also this assuming you have T-Mobile US, if it does not work try these settings.
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.155.165.050
Port: 8080
Username: (leave this blank)
Password: (leave this blank)
Server: (leave this blank)
MMSC: http://mms.msg.english.t-mobile.com/mms/wapenc
MMS Proxy: 216.155.165.50
MMS Port: 8080
MCC: 310
MNC: 260
APN Type: (leave this blank)
Hope this helps!
Click to expand...
Click to collapse
No dice for me with these settings. I managed to send a small picture with the default settings, but anything else is no go.
My phone also keeps bouncing between H and 3G whenever it needs to send / recieve data. But my speeds are incredible slooooow. 30kB/sec down and about 4 kB/sec up.
Thoughts?
Mods - I know this is a question asked in most android builds "how do i get mms to send?" so i took some time and tried to work out a bug.
Devs - Ill be testing on all available builds tonight and post the results here.
Mods, Devs, and [Ref] Thread holders - want to use it ? go ahead.
Everyone else -
I cant believe that I have my CCNA (Cisco Certified Network Associate) i did not notice this.
IP address octets cannot have a octet begin with a 0
So. having said that. use these settings and have a great time sending messages.
NAME: T-Mobile US
APN: epc.tmobile.com
PROXY: Blank
PORT: Blank
USERNAME: Blank
PASSWORD: Blank
SERVER: wap.voicestream.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS PROXY: 216.155.165.50 <--------- THE .50 is the major change i found.
MMS PORT: Blank
MCC: 310
MNC: 260
AUTH TYPE: NONE <--this is another changed setting. do not leave blank.
APN TYPE: default,supl,mms <-- This also seems to be important.
Make sure after editing that you press the windows key and click save.
Initial test Winmo - Android setup: Miri 17.6, Radio 2.10.50.28_2 / Android; ShubCraft
_______________________________________________________________________________
Another test. This time with Miri 17.6 Radio 2.10.50.28_2 / Android MATTC
Settings from first boot allow me to send MMS. However, Serious degradation not seen in first test.
Settings are:
APN; epc.tmobile.com
prox blank
port none
user none
password none
server none
mmsc mms.msg.eng.t-mobile.com/mms/wapenc
MMS protocol wap 2.0
mcc 310
mnc 260
auth none
type not set
eosrider said:
Mods - I know this is a question asked in most android builds "how do i get mms to send?" so i took some time and tried to work out a bug.
Devs - Ill be testing on all available builds tonight and post the results here.
Mods, Devs, and [Ref] Thread holders - want to use it ? go ahead.
Everyone else -
I cant believe that I have my CCNA (Cisco Certified Network Associate) i did not notice this.
IP address octets cannot have a octet begin with a 0
So. having said that. use these settings and have a great time sending messages.
NAME: T-Mobile US
APN: epc.tmobile.com
PROXY: Blank
PORT: Blank
USERNAME: Blank
PASSWORD: Blank
SERVER: wap.voicestream.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS PROXY: 216.155.165.50 <--------- THE .50 is the major change i found.
MMS PORT: Blank
MCC: 310
MNC: 260
AUTH TYPE: NONE <--this is another changed setting. do not leave blank.
APN TYPE: default,supl,mms <-- This also seems to be important.
Make sure after editing that you press the windows key and click save.
Initial test Winmo - Android setup: Miri 17.6, Radio 2.10.50.28_2 / Android; ShubCraft
Click to expand...
Click to collapse
just tried with same set up.... minus the miri rom... running the chucky droid rom... these settings do not work for me....
NONE OF THE POSTED SETTINGS WORK FOR ME... CRAZY thing is i was able to send one last night. ONE! thats it????????????????
tesing multiple message sending now. with initial settings.
Multiple mms on initial settings works. have sent 4 different pictures to multiple numbers. all confirmed working.
just tried it to no avail, running nrg's glass wm, 2.12 radio and dan's froyo v1 with the latest zimage.
how long are you guys letting it run for before deleting the message?
I can confirm these settings work for US T-Mobile just sent one to myself
Using mattc froyo 1.4
Latest zImage
Miri 17.6
Radio 2.12.50
Tmous 1024
Sent from my HTC Desire using XDA App
hmm... benicia... im in Santa rosa. i wonder if these settings might be regional.
eosrider said:
how long are you guys letting it run for before deleting the message?
Click to expand...
Click to collapse
15 min... also if you long press one the sending picture and go to details the size is only 1KB
Now we need to fix the sending size, the pic I sent got so degraded an only 14k from a 250k pic
Sent from my HTC Desire using XDA App
Got it to send one MMS to myself. It took about 15 minutes. Had to disable WiFi. Can't get any more to send.
Using DarkStone froyo
Latest zImage (8/3)
Miri 17.6
Radio 2.12.50
Tmous 1024
Honolulu, HI
i can receive them now, which i couldn't consistently before. still no luck getting them out however.
i should add that it shows the correct file size when i send it as far as i know, none of them have popped up as being 1kb.
If the message details show 1kb you have not sent a message out
working diligently right now.
I beginning to think Miri's ROM is the factor that is allow those to be able to send. Cause i sent 3, and not a single one worked for over 15 min had the logo, wifi, no wifi, and different radios.
Tried 2 other roms and 2 other android builds per winmo rom. nothing worked.
Did not try experimenting with radio tonight but after all was said and done. went back to the first setup ( Android; Shub / Miri 17.6
ok... something really weird is going on. With different builds i sent all different pictures of random items ( lighters, coins, water bottles ). now those builds that failed my testing were all taken off. SD card was formated between builds. I ended up going back to the setup I had when i started this thread, because it works.
Now i have the people who's picture i sent randomly saying that they are getting their pictures. 3 different pictures and people. Keep in mind that this is AFTER I formatted and went back to the working setup. so i didnt have the same pictures on the sd card.
Thoughts?
I think the problem is the windows rom. I tried many different android builds none of them allowed me to send mms. I was only able to receive them.
the serve is not epc.tmobile.com!
Its wap.voicestream.com
stop thinking its epc. Its not. Thats bs it doesnt work very well!
S3BAZ10 said:
the serve is not epc.tmobile.com!
Its wap.voicestream.com
stop thinking its epc. Its not. Thats bs it doesnt work very well!
Click to expand...
Click to collapse
i use epc.tmobile.com on my 2g iphone to send/recieve mms...
so why are you saying it doesn't work?
eosrider said:
Mods - I know this is a question asked in most android builds "how do i get mms to send?" so i took some time and tried to work out a bug.
Devs - Ill be testing on all available builds tonight and post the results here.
Mods, Devs, and [Ref] Thread holders - want to use it ? go ahead.
Everyone else -
I cant believe that I have my CCNA (Cisco Certified Network Associate) i did not notice this.
IP address octets cannot have a octet begin with a 0
So. having said that. use these settings and have a great time sending messages.
NAME: T-Mobile US
APN: epc.tmobile.com
PROXY: Blank
PORT: Blank
USERNAME: Blank
PASSWORD: Blank
SERVER: wap.voicestream.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS PROXY: 216.155.165.50 <--------- THE .50 is the major change i found.
MMS PORT: Blank
MCC: 310
MNC: 260
AUTH TYPE: NONE <--this is another changed setting. do not leave blank.
APN TYPE: default,supl,mms <-- This also seems to be important.
Make sure after editing that you press the windows key and click save.
Initial test Winmo - Android setup: Miri 17.6, Radio 2.10.50.28_2 / Android; ShubCraft
_______________________________________________________________________________
Another test. This time with Miri 17.6 Radio 2.10.50.28_2 / Android MATTC
Settings from first boot allow me to send MMS. However, Serious degradation not seen in first test.
Settings are:
APN; epc.tmobile.com
prox blank
port none
user none
password none
server none
mmsc mms.msg.eng.t-mobile.com/mms/wapenc
MMS protocol wap 2.0
mcc 310
mnc 260
auth none
type not set
Click to expand...
Click to collapse
This setting work for me send and recive! Thank in a million!
..... I said this once already.
ROM's with no SenseUI and stock Messaging App should work without error as long as APN is correctly Set. Stock/Non-Sense UI Rom's APN:
Code:
NAME: T-Mobile US
APN: epc.tmobile.com
PROXY: <Not Set>
PORT: <Not Set>
USERNAME: <Not Set>
PASSWORD: <Not Set>
SERVER: <Not Set>
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS PROXY: <Not Set>
MMS PORT: <Not Set>
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
AUTH TYPE: None
APN TYPE: default,supl,mms
ROM's WITH SenseUI all have the same issue/bugs if you are on T-Mobile in the US (even with the correct APN's set).
MMS pictures are shrunk to tiny tiny 2kb images when receiving with that HTC Messaging App, this is because Sense sends in the user-agent string for MMS found in: /system/customize/MNS/default.xml
T-Mobile's MMS server's doesn't recognize the "HTC Desire" user-agent string therefore when receiving MMS, you get a tiny tiny thumbnail pic. I think you can set it to "NexusOne" Or was it "Nexus One/Build FRFxx". Forgot if it was one or the latter. (OH.. this is only for TMOUS People, I don't think this affects european peeps, since the Desire Rom was made for that region.) Problem with this is, I think those settings are loaded with the initial setup (first boot, and I'm not sure where it's stored afterwards. If you modify now and save it, it seems to have no effect. Also, customized SenseUI seems to ignore the file altogether?)
Those with incorrect, or missing APN's using any ROM with SenseUI. If you are on T-Mobile, your settings should be as follows (This will allow you to send and receive, but theres the file size restriction):
Code:
NAME: T-Mobile Data
APN: epc.tmobile.com
PROXY: <Not Set>
PORT: <Not Set>
USERNAME: <Not Set>
PASSWORD: <Not Set>
SERVER: <Not Set>
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS PROXY: <Not Set>
MMS PORT: <Not Set>
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
AUTH TYPE: None
APN TYPE: default,supl,mms
Actually, ignore this one, its apparently used for Firmware Over-The-Air updates.
Code:
NAME: T-Mobile FOTA
APN: epc.tmobile.com
PROXY: <Not Set>
PORT: <Not Set>
USERNAME: <Not Set>
PASSWORD: <Not Set>
SERVER: <Not Set>
MMSC: <Not Set>
MMS PROXY: <Not Set>
MMS PORT: <Not Set>
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
AUTH TYPE: None
APN TYPE: hipri
hello all
i recently changed from the windows os to the android os on my T-mobile US Htc HD2.
i need help with one minor problem i have been having; i cannot send or recieve mms while on android on the HD2.
i am running the android froyo 2.2 by dan1j3l (or however its spelled ) and i have had no problems at all, except this. Oh, and i noticed that the volume(sound:ringtones, speakerphone in calls..) is lower than when running windows mobile. but to make things clear, i do have sound on my HD2 when on android froyo.
those are the only two minor problems i have had on the phone.
please help me
im not sure what other information may be needed in order to help me solve my problem, but it would be much appreciated!
thank you,
Vic_Gar
most everyone IS having trouble with the mms... i can recieve as i've heard others can as well but few can send. it's being worked on.
As for sound, it's the same thing... i think i read a few builds have improved sound quality but i'm not sure which... just gotta keep trying em all out, that's what i did.
I am also having this problem hopefully the devs will fix this..its been a month since i could send or recieve MMS
oo and im running froyostone rom
add me to the list.
although...i did have it working for a bit, using the settings where the proxy was set up in the default apn as well as the mmsc field. but it was SLOOOOOOOW (like 10 mins) to send an MMS. I messed with it (of course) now it won't send at all.
I can't find where I saw it but as far as low volume goes you need to max the volume in Windows before booting Android. As android basically runs like an app initially the WM volume setting is applied to it. Hope that helps.
ok, mms is working again.
it's still really slow though. This is my setup. What's a bit different from what I've seen is the combo of filling out the default prox/port and the apn type. I think most of what i've seen suggests filling one or the other.
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.155.165.050
Port: 8080
Username:
Password:
Server:
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.155.165.050
MMS Port: 8080
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
APN Type:default,supl,mms
vic_gar said:
Oh, and i noticed that the volume(sound:ringtones, speakerphone in calls..) is lower than when running windows mobile. but to make things clear, i do have sound on my HD2 when on android froyo.
Click to expand...
Click to collapse
I had this issue before myself when I first installed Froyo. What I did:
Before booting into Android, I made a call and hit Speaker, then raised the Call Volume all the way. I then turned off Speaker and raised the Call Volume again. I also double-checked the "Sounds" settings and made sure everything was set to "Normal".
I no longer have issues with the sound.
Hope this helps!
I can send and reciece MMS in Android
Im running Htcclay's SuperHD2 on mine and the only thing that acts up is if i use Chomp SMS. When that preview popup comes up with the text, when i reply it doesnt send. Everything works fine if i open the text and send a sms/mms
I have better luck sending and receiving mms using RMNET rather than ppp. It is very slow to send though...
I tried xjjk settings and, they did work for me. I don't have the MMS Protocol setting. Mine is not slow either.
So far this is working for me.
I'm using Darkstone HD2Froyo V3
There is a mdeejay build revolution 1.5. It has a link to mms fix for t-mobile us.
Sent from my HTC HD2 using XDA App
thanks!
this worked perfectly!
xjjk said:
ok, mms is working again.
it's still really slow though. This is my setup. What's a bit different from what I've seen is the combo of filling out the default prox/port and the apn type. I think most of what i've seen suggests filling one or the other.
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.155.165.050
Port: 8080
Username:
Password:
Server:
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.155.165.050
MMS Port: 8080
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
APN Type:default,supl,mms
Click to expand...
Click to collapse
tooter1 said:
I tried xjjk settings and, they did work for me. I don't have the MMS Protocol setting. Mine is not slow either.
So far this is working for me.
I'm using Darkstone HD2Froyo V3
Click to expand...
Click to collapse
How'd you get it to start working?
While booted in android goto settings, wireless controls, mobile networks, access point names, press menu and select new apn, enter the above settings, press menu save. Go back into apn and select your apn you created.
Sent from my HTC HD2 using XDA App
I tried to use the settings, however I can not select WAP 2.0 I'm using nand cyanogen 2.1 build.. I get the little 3G symbol then all of a sudden it tells me "unsuccessful"
settings
yes follow the directions to add the MMS settings on your phone. everything will work after you install but with Android on your Micro SD card remember to reboot after the first boot. then everything should work.
once i got the settings right everything was working fine recv and sending MMS
xjjk said:
ok, mms is working again.
it's still really slow though. This is my setup. What's a bit different from what I've seen is the combo of filling out the default prox/port and the apn type. I think most of what i've seen suggests filling one or the other.
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.155.165.050
Port: 8080
Username:
Password:
Server:
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.155.165.050
MMS Port: 8080
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
APN Type:default,supl,mms
Click to expand...
Click to collapse
Those are one of the two most common TMOUS "working" settings I've seen floating around on the forums, and I highly believe that the settings depend on your plan, location, or some other vague difference. Also, some mention setting the proxy screws up their https sessions. The other version is:
APN: epc.tmobile.com
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: http://216.155.174.84/servlets/mms
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
APN Type:default,supl,mms
There's a few TMOUS MMS threads floating around that might have other settings as well. Try one of the two above & see what works for you.
Also, I found I can't send MMS to a friend of mine, and after some troubleshooting, found that it's our phones sending too big of pics for her phone (on AT&T) to receive. I installed an app on an earlier build (that I can't remember name of) that pre-shrunk pics before sending, which then worked fine. So, when testing, check to see if it's your phone not sending, or just theirs not receiving.
This fixed my issue! yay! Thanks you!
xjjk said:
ok, mms is working again.
it's still really slow though. This is my setup. What's a bit different from what I've seen is the combo of filling out the default prox/port and the apn type. I think most of what i've seen suggests filling one or the other.
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.155.165.050
Port: 8080
Username:
Password:
Server:
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.155.165.050
MMS Port: 8080
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
APN Type:default,supl,mms
Click to expand...
Click to collapse
I have used multiple Android builds and have used Desire, Froyo, etc. and with every build (currently using DarkStone's 2.2 build), I have had problems sending and receiving MMS messages. I cannot send nor receive them at all. I receive network errors every attempt, no matter the build, no matter if I update the zImage. Has anyone else had this problem or might know of a solution?
TMO HTC HD2
PutoFace said:
I have used multiple Android builds and have used Desire, Froyo, etc. and with every build (currently using DarkStone's 2.2 build), I have had problems sending and receiving MMS messages. I cannot send nor receive them at all. I receive network errors every attempt, no matter the build, no matter if I update the zImage. Has anyone else had this problem or might know of a solution?
TMO HTC HD2
Click to expand...
Click to collapse
Are you able to access the net? It may be your APN/DNS settings, etc.
Yes, I am able to access the net. Everything in the build seems to run pretty smoothly, except for sending/receiving MMS.
PutoFace said:
Yes, I am able to access the net. Everything in the build seems to run pretty smoothly, except for sending/receiving MMS.
Click to expand...
Click to collapse
Check in your APN and what's there for you MMS?
Everything should be explained here:
http://forum.xda-developers.com/showthread.php?t=774672
Thank you for the link pretzdothack!
However, I have tried the various settings suggested by several users and still have MMS messages not going through (have deleted and attemted to resend as well).
The last set of settings I used were the following:
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: (leave this blank)
Port: (leave this blank)
Username: (leave this blank)
Password: (leave this blank)
Server: (leave this blank)
MMSC: h ttp://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS Protocol: WAP 2.0 (if you have this)
MCC: 310
MNC: 260
APN Type: default,supl,mms (instead of this setting, i used internet+MMS)
Correction, I have used these settings and it seems to work.
Name: T-mobile US
APN: epc.tmobile.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: h ttp://216.155.174.84/servlets/mms
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: not set
APN type: default,supl,mms
THANKS pretzdothack AND deadmansink !!!!!!!!!!!!
PutoFace said:
Thank you for the link pretzdothack!
However, I have tried the various settings suggested by several users and still have MMS messages not going through (have deleted and attemted to resend as well).
The last set of settings I used were the following:
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: (leave this blank)
Port: (leave this blank)
Username: (leave this blank)
Password: (leave this blank)
Server: (leave this blank)
MMSC: h ttp://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS Protocol: WAP 2.0 (if you have this)
MCC: 310
MNC: 260
APN Type: default,supl,mms (instead of this setting, i used internet+MMS)
Click to expand...
Click to collapse
I have settings in my thumbnail pic that you may want to try, if you haven't already. Make sure that you DNS settings match your APN
deadmansink said:
I have settings in my thumbnail pic that you may want to try, if you haven't already. Make sure that you DNS settings match your APN
Click to expand...
Click to collapse
Did you try this? Does it work?
tried settings on mdj's gingerbread build and its working. wasnt working before so thank you sirs
PutoFace said:
Correction, I have used these settings and it seems to work.
Name: T-mobile US
APN: epc.tmobile.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: h ttp://216.155.174.84/servlets/mms
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: not set
APN type: default,supl,mms
THANKS pretzdothack AND deadmansink !!!!!!!!!!!!
Click to expand...
Click to collapse
Thanks these settings work for MIUI builds as well
Sent from my htc_bravo using XDA App
deadmansink said:
I have settings in my thumbnail pic that you may want to try, if you haven't already. Make sure that you DNS settings match your APN
Click to expand...
Click to collapse
what are DNS SETTINGS, how do you change them (to what) and why? I seem to have sporadic success with mms. if these settings can make my transmissions reliable i would greatly appreciate it.
steve austin said:
what are DNS SETTINGS, how do you change them (to what) and why? I seem to have sporadic success with mms. if these settings can make my transmissions reliable i would greatly appreciate it.
Click to expand...
Click to collapse
They are listed in your build.prop file: using a file explorer go to system/build.prop change dns settings. As a default they are set to google's and some carriers do not recongnize.
deadmansink said:
They are listed in your build.prop file: using a file explorer go to system/build.prop change dns settings. As a default they are set to google's and some carriers do not recongnize.
Click to expand...
Click to collapse
thanks. i have these settings. what exactly am i looking to chane or match up?
Name: T-mobile US
APN: epc.tmobile.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: h ttp://216.155.174.84/servlets/mms
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: not set
APN type: default,supl,mms
steve austin said:
thanks. i have these settings. what exactly am i looking to chane or match up?
Name: T-mobile US
APN: epc.tmobile.com
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: h ttp://216.155.174.84/servlets/mms
MMS Proxy: 216.155.165.50
MMS Port: 8080
MMS protocol: WAP 2.0
MCC: 310
MNC: 260
Authentication type: not set
APN type: default,supl,mms
Click to expand...
Click to collapse
These are you APN, not DNS, settings and they are fine except mine in the APN type says not set.
deadmansink said:
These are you APN, not DNS, settings and they are fine except mine in the APN type says not set.
Click to expand...
Click to collapse
yes, these are the apn settings. my question is what am i supposed to look at here to correlate or match up with with the dns settings? thanks in advance.
steve austin said:
yes, these are the apn settings. my question is what am i supposed to look at here to correlate or match up with with the dns settings? thanks in advance.
Click to expand...
Click to collapse
Sorry about that, there is nothing that needs to "match" between the two...I was wrongly pointing to the match of my settings for both.