This is when I put my phone into mass storage.
My phone is taking forever to be recognized by my Windows 7 computer, my laptop recognizes it right away, I am using my front USB ports and have tried the back one even. Also, I have installed drivers and un-installed them, I have also done everything under the sun to try and get it to sync better. But alas it takes a while for my desktop to recognize that I have put my phone into mass storage. It is really bugging me, I am also using the stock cable that came with the phone and have even installed the official drivers. But to no avail.
My windows 7 laptop recognizes it fine
Sent from my SPH-D700 using XDA App
Maybe its ur usb port then if ur laptop picks it up fine. U can't blame it on the phone
Sent from my SPH-D700 using XDA App
b1indsided said:
Maybe its ur usb port then if ur laptop picks it up fine. U can't blame it on the phone
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I am not blaming the phone at all. I am just trying to understand why this phone doesn't mount and my Hero did fine and does fine on the same port. How can I not say maybe its the phone...
Lol well maybe its the usb like I was saying. Or maybe it just doesn't like the micro usb??
Sent from my SPH-D700 using XDA App
b1indsided said:
Lol well maybe its the usb like I was saying. Or maybe it just doesn't like the micro usb??
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Very very possible my good sir. I will keep trying different ports!
EDIIITTT AND UPDATE!
I AM GETTING AN I/O device error.
Try reformatting the card... Use a card reader to pull your data off first..
You could also have a defect on your device, but I'd test it in a different computer before concluding its the phone..
nicknomo said:
Try reformatting the card... Use a card reader to pull your data off first..
You could also have a defect on your device, but I'd test it in a different computer before concluding its the phone..
Click to expand...
Click to collapse
It is definatetly not a device defect for I have a samsung laptop with Windows 7 home premium 64 bit and it recognizes right away. Also, I find that if I enable mass storage the computer reads it (my desktop) but it just takes a while to. I will jsut have to be patient I guess. lol
I'm having the same problem...I've tried both sets of drivers.
Sent from my SPH-D700 using XDA App
Blitzpwnage said:
It is definatetly not a device defect for I have a samsung laptop with Windows 7 home premium 64 bit and it recognizes right away. Also, I find that if I enable mass storage the computer reads it (my desktop) but it just takes a while to. I will jsut have to be patient I guess. lol
Click to expand...
Click to collapse
Very few defects exist across ALL the epic phones.. I was suggesting it could be a defect with that specific phone, but that conclusion should only be reached after further testing..
I had trouble with my Win 7 64bit laptop when I first tried to connect it. I switched to the usb port on the other side of the lappie and it recognized instantly. There seems to be a bug in Win 7 and how it recognizes the Epic on certain ports. My Blackberry worked fine in all ports. I did install the 64 bit drivers and still had problems with that port.
Related
Hi I just got this phone last week and just can't seam to open mass storage. That option just does not appear when I plug in the usb cable on my laptop. I have usb debugged mode turned off and even updated to 2.2 .....I too would like to enjoy to import files straight thru my phone u.U
Sent from my SPH-D700 using XDA App
Do you have the samsung drivers installed. Get from sgs site.
Sent from my SPH-D700 using Tapatalk
Yea no matter what I do the usual Charge/ mass storage / teether options do not appear on my telephone screen
Sent from my SPH-D700 using XDA App
I've just learned to live with it and have to rip my damn sd card out
Sent from my SPH-D700 using XDA App
I know the feeling I'm just worryd about not being able to root my phone since windows isn't detecting anything. This is my 2nd epic u.u
Sent from my SPH-D700 using XDA App
Turn usb debugging on and let it install and then try?
Sent from my SPH-D700 using XDA App
There is no fix for this, it works when it wants to on win 7 64bit. I can't get mine to work until I try every usb port on a small hub I got. I've tried offical drivers, unoffical, viper team drivers it just sucks. Only time I've had it work at go was when I braught odin and the one click to the campus and did it on a vista machine. All I can say is, reinstall the driver buy a small usb hub and plug and pray
Sent from my SPH-D700 using XDA App
Just spoke wit a rep they said I have to go into a store. Seams to be a hardware issue. Hopefully they give me a new one since the replacement they gave me was refurbished.
Sent from my SPH-D700 using XDA App
I'm sure this has already been posted but couldn't find it. But I was trying to flash one of the roms that were posted in here with odin3 and when I put the phone in download mode and Hooke it up to the computer I get either device not recognized or device.malfunctioning but mass storage works no problem. I use the cable that came with the phone and used every USB port on the computer. Any suggestions?
Sent from my SPH-D700 using XDA App
Have you installed Samsung Galaxy S drivers?
I had that problem when trying to flash EB13.
From what others have said here (and my personal experiences with trying to flash EB13) the cable the Epic comes with is crap.
When using another cable, I had much more luck in getting Odin/Windows/Samsung Updater to see my phone.
YMMV though, but it worked for me.
I think you should re-install the drivers, and try a USB port on the back of the computer. Usually the ports on the front of the computer aren't the best for these things.
Sent From My Command Center... (aka basement)
Reboot computer and reboot phone and try it again thats what worked for me in the past
Reinstall the Epic drivers from Samsung. Make sure to use the back ports on the back of your computer that are on the motherboard. These will provide better and cleaner power to your device, also cycle both the computer and the phone and don't plug in the device till after you have went into download mode. This should fix your problem.
Same thing happened to me. I tried using the micro USB cable from my wifes Blackberry. Works great now. Samsung's cables suck
87Octane said:
Have you installed Samsung Galaxy S drivers?
Click to expand...
Click to collapse
I've installed uninstalled and installed the drivers again. Tried the USB ports in the front and back of the computer. I'll try and buy a new cable and see if that works.
Thanks for all the suggestions
Sent from my SPH-D700 using XDA App
Have you tried turning it off and on again?
dmanwithnoname said:
Have you tried turning it off and on again?
Click to expand...
Click to collapse
Yeah I've tried everything I could think of except using a different cable. Gotta wait and buy a new cable
Sent from my SPH-D700 using XDA App
ichefae85 said:
Yeah I've tried everything I could think of except using a different cable. Gotta wait and buy a new cable
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Dude I had this exact same problem. What os are you running? and is it 32 or 64bit? I had this problem on windows 7 64bit. I had to connect my to an xp os and wham it detected it fine and did its thing. Weird i know but it worked.
P.S: changing the cables for me didn't work. I just used another computer which was on xp.
Pvt WhoOkid said:
Dude I had this exact same problem. What os are you running? and is it 32 or 64bit? I had this problem on windows 7 64bit. I had to connect my to an xp os and wham it detected it fine and did its thing. Weird i know but it worked.
P.S: changing the cables for me didn't work. I just used another computer which was on xp.
Click to expand...
Click to collapse
I'm using a 32bit with XP. So I don't know haha
Sent from my SPH-D700 using XDA App
im having the same issue on EB13..
every port, any computer from win xp Pro to win 7
to 3 different cables..
it charges FINE.
wont mount or recognize in computer...
i am thinking...... something i flashed....
like asop screen (from dk28) or genocide 0.2a kernal or something..
dmbatson said:
im having the same issue on EB13..
every port, any computer from win xp Pro to win 7
to 3 different cables..
it charges FINE.
wont mount or recognize in computer...
i am thinking...... something i flashed....
like asop screen (from dk28) or genocide 0.2a kernal or something..
Click to expand...
Click to collapse
I can get mine to mount no problem it's weird
Sent from my SPH-D700 using XDA App
I recently reformatted and couldn't get odin to work. I put my phone in debug mode and when I connected it windows ended up installing something else and everything worked after that.
Windows 7 64 bit with 64 bit samsung drivers.
Sent from my SPH-D700 using XDA App
ichefae85 said:
I'm using a 32bit with XP. So I don't know haha
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Beats me then. Try a different computer.
Guys I've had this issue and tried everything you guys have and some. Look at the port directly on your phone. there are tiny little copper contacts on the tooth that can get bent.
You will have to use some tweezers to get it back down but look at this before buying a new usb cable as this was my issue
seoulseek80 said:
Guys I've had this issue and tried everything you guys have and some. Look at the port directly on your phone. there are tiny little copper contacts on the tooth that can get bent.
You will have to use some tweezers to get it back down but look at this before buying a new usb cable as this was my issue
Click to expand...
Click to collapse
I checked that and didn't find anything bent in the USB port on the phone. Might try new cable and different computer when I have access to both
Sent from my SPH-D700 using XDA App
Okay stupid question. Doest it make a difference if the phone isn't fully charged? Haha if so then I'm stupid haha
Sent from my SPH-D700 using XDA App
I have done flashes with thirty to forty percent battery. I don't think odin checks your battery. I would caution against flashing with to low of a battery as your phone can die during a flash.
Sent from my SPH-D700 using XDA App
In reality I really don't know where else to go I know that there is normally every time that you connect your phone it leads you straight into the Usb Storage now when I connect it. It just go straight into charging mode is there anything. Adb shell won't and I have to wipe it by tomorrow to send it our to Best buy! Help Please!
Is it rooted? If not wipe from the bootloader?
Sent from my PC36100 using xda premium
I had this problem. Here is how I fixed it. I deleted all Android phone and USB storage drivers from my computer. Then I plugged in the phone to USB. Then I quickly removed the USB from the phone while the computer was looking for drivers. Then everything worked fine again.
Sent from my Nexus S using XDA App
If it's just for wiping why don't u do a format USB?
Oh I guess u wanna backup too... if u have wifi just connect via wifi and copy files... u can access ur comp from es file explorer on wifi
Wow I had this same problem about a week and a half ago. I never did find a solution. I tried multiple computers. I couldnt even unroot it because the computer did not detect it even in fastboot mode. I ended up sending it back to samsung to be repaired.
Alopez_45 said:
In reality I really don't know where else to go I know that there is normally every time that you connect your phone it leads you straight into the Usb Storage now when I connect it. It just go straight into charging mode is there anything. Adb shell won't and I have to wipe it by tomorrow to send it our to Best buy! Help Please!
Click to expand...
Click to collapse
What data are you trying to backup? I would go into recovery, wipe data/cache, reflash the ROM, then test it.
You can backup apps/settings with titanium backup before you wipe.
Alopez_45 said:
In reality I really don't know where else to go I know that there is normally every time that you connect your phone it leads you straight into the Usb Storage now when I connect it. It just go straight into charging mode is there anything. Adb shell won't and I have to wipe it by tomorrow to send it our to Best buy! Help Please!
Click to expand...
Click to collapse
Hey buddy youre not alone, mine is doing the same. Get a USB device not recognised error. Not found a solution yet
I too am not able to achieve a data transfer. I am running cm7 nightlies with Matrix kernel. Thought it was my cable going bad - replaced it and still no luck.
I'm assuming ur on bfs
Bfs causes this. Go cfs
Sent from my HTC Sensation 4G using XDA App
I've tried it all to get my phone connected. It only works in bootloader.
Sent from my Nexus S 4G using Tapatalk
I had this problem I fixed it by removing the battery plug usb to phone and computer then reinsert the battery then turn on the phone. I ran into this problem when I upgraded to 2.3.7
Sent from my Nexus S 4G using Tapatalk
mathkid95 said:
I'm assuming ur on bfs
Bfs causes this. Go cfs
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
I am on CFS. Never even tried BFS.
Ihad that same problem the only fix for me was calling sprint then they sent me to a repair shop which COULDN'T fix it so they mailed one to the repair center & I got a new one
Sent from my Nexus S 4G using XDA Premium App
Fixed mine with some serious cleaning of the USB port. I also tried buying a new cable, downloading drivers, etc. in the end, it was just a bad connection.
Sent from my Nexus S 4G using xda premium
I've tried many cables, almost positive mine is a pure driver issue.
Sent from my Nexus S 4G using Tapatalk
I've tried absolutely everything in this thread. Lost USB connectivity completely on my phone. Doesn't matter what machine, what OS, or what cable, or what drivers are installed. I'm assuming it must be a hardware issue at this point. Doesn't even work in bootloader.
For those updating OTA to 2.3.6 via OTA and needing to re-root their phones, make sure you're not having this issue. Being stuck without root is a pain in the ass!
Clean your USB port on your nexus! Clean it well.
Sent from my Nexus S 4G using xda premium
anaglich said:
Clean your USB port on your nexus! Clean it well.
Click to expand...
Click to collapse
Good advice actually. Scrubbing it with a dry toothbrush + using a a brand new 3 inch USB cable made the sucker finally connect.
Must have been a combination of bad cables and poor USB port hygiene
Yep, had to take a knife, brush, and alcohol swabby to mine.
trying to install Samsung USB drivers on win 7 X64. Getting "unknown uninstall error. contact to distributor" ANyone have a solution?
thanks
Jim
Try these...http://db.tt/gh3MgHKl
Sent from my SPH-D700 using xda premium
Biggoron said:
Try these...http://db.tt/gh3MgHKl
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
didnt work
Hmmm sorry figured you had bad drivers guess not
Sent from my SPH-D700 using xda premium
Im telling you i was stuck in limbo forever at least 3 months tried everything its the cord go to verizon and get a micro usb cord . Stock ones are trash that fixed mine the stock one said I was connected and everything charged perfect but adb nope .if that don't work get a replacement phone for free cause the port on your epic is bad but try a new cord first ..hope it hel0ps
Sent from my SPH-D700 using XDA Premium App
Sherrillface said:
Im telling you i was stuck in limbo forever at least 3 months tried everything its the cord go to verizon and get a micro usb cord . Stock ones are trash that fixed mine the stock one said I was connected and everything charged perfect but adb nope .if that don't work get a replacement phone for free cause the port on your epic is bad but try a new cord first ..hope it hel0ps
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
Curious... Did Odin work for you with the old cord? Or transferring files to the sd card? I ask because ADB doesn't work for me since upgrading from Win 7 32 to 64. I can get a little bit of logcat to run sometimes and it hangs but Odin works flawlessly. Have tried several cords (that also work on an old Windows XP machine I have) with no luck. I guess I could try a new cord but that doesn't make sense to me
Biggoron said:
Hmmm sorry figured you had bad drivers guess not
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
I just re installed Win 7. works fine now.
jimhorner5405 said:
I just re installed Win 7. works fine now.
Click to expand...
Click to collapse
That's one way of fixing it. I also had the same issue, resolved first removing all the drivers for the phone, updated chipset drivers, reboot, re-installed the phone drivers, reboot then plugging in the phone.
Just in case someone else has the same issue and doesn't want to re-install windows
System was a dell latitude e6410
jimhorner5405 said:
I just re installed Win 7. works fine now.
Click to expand...
Click to collapse
That was going to be my next suggestion, glad you got it fixed
Sent from my SPH-D700 using xda premium
im sorry to sound so stupid and ask a ridiculous question,but why cant i install my nexus 4 drivers???????i cant make it show at all......no matter what i do......it charges via usb but thats it.
Different leads etc more drivers than the paris dakar rally but still cant get it to even show in the bloody devuce manager
hippopig said:
im sorry to sound so stupid and ask a ridiculous question,but why cant i install my nexus 4 drivers???????i cant make it show at all......no matter what i do......it charges via usb but thats it.
Different leads etc more drivers than the paris dakar rally but still cant get it to even show in the bloody devuce manager
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=1766475
Follow all the instructions and it should work for you.
Sent with my Nexus® 10 minus 3
thats what ive been trying to use and follow....ive now got it to show as an android composite adb interface but only with the exclamation mark........when i try to install any drivers from that point i just get error code 10 that its been unable to start
hippopig said:
thats what ive been trying to use and follow....ive now got it to show as an android composite adb interface but only with the exclamation mark........when i try to install any drivers from that point i just get error code 10 that its been unable to start
Click to expand...
Click to collapse
Ok, try this : http://forum.xda-developers.com/showthread.php?t=2588979
Delete the dm Android device and install this program. Both of them are installed on my computer and working fine.
Sent with my Nexus® 10 minus 3
still no,now i cant even see it at all again.....cant believe im having such problems
What OS are you running on your computer? Have you tried a different computer?
audit13 said:
What OS are you running on your computer? Have you tried a different computer?
Click to expand...
Click to collapse
hi Audit,win 7 ultimate x64 and yes tried different ones and still the same.....cant even put any files on it
This device cannot start. (Code 10) is all i can get out of the twatting thing
hippopig said:
hi Audit,win 7 ultimate x64 and yes tried different ones and still the same.....cant even put any files on it
Click to expand...
Click to collapse
When you connect the phone to your computer, do you get an RSA security message on your phone allowing the computer to access your phone? I'm asking because I didn't notice the message on mine at first. Once I clicked yes, it was fine from that point forward.
no,nothing...i can just make it charge thats it....even with different leads
Wow, that's a mystery to me. Maybe the usb port is defective?
audit13 said:
Wow, that's a mystery to me. Maybe the usb port is defective?
Click to expand...
Click to collapse
hippopig. i was having the same problem, and this simple (can't believe how simple) fix worked. try it out.
http://www.youtube.com/watch?v=LirXNHRsGJE
I have the same problem whenever I load the kies drivers for my wife's phone....Samsung works...nexus is never seen. I have to uninstall all Samsung and nexus drivers, then reinstall the nexus ones and it communicates again.
Sent from my Nexus 4 using XDA Premium 4 mobile app
maulich said:
I have the same problem whenever I load the kies drivers for my wife's phone....Samsung works...nexus is never seen. I have to uninstall all Samsung and nexus drivers, then reinstall the nexus ones and it communicates again.
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That's more of a Windows issue.
Sent with my Nexus® 10 minus 3
maulich said:
I have the same problem whenever I load the kies drivers for my wife's phone....Samsung works...nexus is never seen. I have to uninstall all Samsung and nexus drivers, then reinstall the nexus ones and it communicates again.
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
the way kies works (and my disdain for touchwiz) are the two main reasons i never liked samsung phones.
hippopig said:
hi Audit,win 7 ultimate x64 and yes tried different ones and still the same.....cant even put any files on it
This device cannot start. (Code 10) is all i can get out of the twatting thing
Click to expand...
Click to collapse
Language! My 4year old says that now! Kidding
Sent from my Nexus 4 using XDA Premium 4 mobile app
howard bamber said:
Language! My 4year old says that now! Kidding
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i know....frustrating though
still the same,although now i can get it to show as unknown device
Same problem here.. i noticed on the latest purity update..
Sent from my Nexus 4 using XDA Premium 4 mobile app
---------- Post added at 04:05 PM ---------- Previous post was at 03:52 PM ----------
dmoss74 said:
hippopig. i was having the same problem, and this simple (can't believe how simple) fix worked. try it out.
http://www.youtube.com/watch?v=LirXNHRsGJE
Click to expand...
Click to collapse
Worked just fine!
Sent from my Nexus 4 using XDA Premium 4 mobile app
ive just tried on my sons laptop and again it wont show up.....ive reset it twice and tried different leads.....all i can do is charge it
I've had something similar happen in the past. The only way I was able to resolve it was to plug the USB cable in and then toggle USB debugging on and off.
CmptrGk said:
I've had something similar happen in the past. The only way I was able to resolve it was to plug the USB cable in and then toggle USB debugging on and off.
Click to expand...
Click to collapse
I can get it to display now as an android device but whatever driver i try it just fails and has error code 10 saying that it cant start.........this is a bag o ****e