Upgrading to CM 6.0.0 DS, w/problems. - myTouch 3G, Magic General

Right, so I've been a long time lurker on this site, and I've finally hit a brick wall.
The new CM Rom absolutely will NOT work on my Mytouch 3g, it only goes to the splash screen for hours on end. I've tried Wiping everything with clockwork recovery for a fresh install, I've tried installing over past versions, and nothing.
Any help is GREATLY, no seriously, GREATLY appreciated.
Attached is the only logcat i can get from it. Not much there though..

Have you unrooted and started over? I was able to get CM6 running on my phone, although it ran like ****, but I suspect that's because I hadn't done as complete a wipe as I thought.

Unrooting is the ONLY thing I haven't tried. I ended up just using the RC3 build. Though....all the 6.0.0 RC1,2,3 builds for me are all battery drainers...

Same with me! but mine is 32A htc magic. how about ask cyanogen about this?

Umm...I'm sure someone has had this issue, and had it resolved, all it will take is for them to post. I don't want to bother with cyanogen. He's much above my prowess.

ira787 said:
Umm...I'm sure someone has had this issue, and had it resolved, all it will take is for them to post. I don't want to bother with cyanogen. He's much above my prowess.
Click to expand...
Click to collapse
Have you posted your question on the CyanogenMod Forum?

Yes I did.
http://forum.cyanogenmod.com/topic/6334-upgrading-to-600-ds-logcat/
As you can see, no replies.

ira787 said:
Unrooting is the ONLY thing I haven't tried. I ended up just using the RC3 build. Though....all the 6.0.0 RC1,2,3 builds for me are all battery drainers...
Click to expand...
Click to collapse
Why not try that?

Lol I'm a high school student, attending some college classes, plus I'm in marching band. And my labor day weekend just ended, so my phone shenanigans will have to cease for now until I have free time.
Also, I'm thinking of dropping the mytouch 3g. Not enough RAM for me, I may upgrade to the headphone jack mytouch, or the slide. Which BOTH have more RAM.
EDIT: AND, my contract expires soon.

ira787 said:
Lol I'm a high school student, attending some college classes, plus I'm in marching band. And my labor day weekend just ended, so my phone shenanigans will have to cease for now until I have free time.
Also, I'm thinking of dropping the mytouch 3g. Not enough RAM for me, I may upgrade to the headphone jack mytouch, or the slide. Which BOTH have more RAM.
EDIT: AND, my contract expires soon.
Click to expand...
Click to collapse
I'm in the same boat except I'm a working professional, going to school part time. Also sorta looking at the slide, but really would rather hold out for the G2.
Honestly, I just unrooted completely then used Universal Androot so I could install setcpu. I didn't even install a custom recovery or flash any other ROMs, just staying all OEM this time. I've been really happy so far. It's stable and runs better than stock.

I see no pertinent information here. Whats your fasboot specs???? (back+power)

DonJuan692006 said:
I see no pertinent information here. Whats your fasboot specs???? (back+power)
Click to expand...
Click to collapse
Phateless said:
I'm in the same boat except I'm a working professional, going to school part time. Also sorta looking at the slide, but really would rather hold out for the G2.
Honestly, I just unrooted completely then used Universal Androot so I could install setcpu. I didn't even install a custom recovery or flash any other ROMs, just staying all OEM this time. I've been really happy so far. It's stable and runs better than stock.
Click to expand...
Click to collapse
Hmm...now there's an option......
DonJuan692006 said:
I see no pertinent information here. Whats your fasboot specs???? (back+power)
Click to expand...
Click to collapse
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2005 (SAPP30000)
Radio-2.22.19.26I
APR 200 2009, 15:30:43

ira787 said:
Hmm...now there's an option......
Click to expand...
Click to collapse
You're on a G1 though, right? In your case it would probably be worth it to try Dwang or SuperD, just so you could have the Navi. The ONLY reason I originally rooted in the first place was to overclock, since I already had Navi.

Nope, I'm on a MyTouch 3g. 32B. The first gen.

Nope, I'm on a MyTouch 3g. 32B. The first gen.

ira787 said:
Nope, I'm on a MyTouch 3g. 32B. The first gen.
Click to expand...
Click to collapse
Just like me. Yeah, then do what I did and try it out. It's definitely not as fun as having Eclair on your phone, but it's reliable.

I think I may just stick to RC3 for now, my contract is almost up, and it's pretty quick(still laggy). If I continue to have problems though, that'll definitely be what I do Phateless. I really wanted to try out the 6.0.0 DS though. lol

ira787 said:
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2005 (SAPP30000)
Radio-2.22.19.26I
APR 200 2009, 15:30:43
Click to expand...
Click to collapse
you may be running the wrong radio... i'm not 100% sure, 'cause i'm still new to this rom stuff.
my radio is 3.22.26.17, and i run cyanogen just fine...
have you ever switched your radio from the e911 radio...?
EDIT: realized you aren't on rogers.. lol
do you have the right radio?
have you tried wiping and installing again...?
flashing in the proper order? (cyanogen, kernel, gapps)

As far as I know I'm on the right radio...
Huh...I'm actually on the non-US radio, would that affect anything? So far, that's the only thing I would think would mess up my cm6 installation. But I can't flash the new radio...

Bumpity bumpbump

Related

getting a mytouch, few questions. root/board/sense/2.0 related

so i'm ditching my G1 because it barely works anymore. apparently theres something wrong with the motherboard and thats why any rom i install fails after a week and makes the phone unusable (even cranogen's rom died on my phone)
anyway i'm hoping to have better luck with the mytouch and with researching lately i've seen all this stuff about the 32a and 32b
As far as rooting goes, to my understanding, i just use this:
http://forum.xda-developers.com/showthread.php?t=556200
Then toss whatever rom i want on the SD and i'm pretty much good. That right?
From my understanding, the 32B is the T-mobile mytouch and is exactly the same as the g1. which dosn't make me too happy. But if this is true, does it have anymore space for apps or is it the same 70MB bull****?
second question. I love the hero/sense ui and i'd love to use it on the myTouch. So i know the question people hate to hear but if without having to read through hundereds of post i'd like to know which one is the most stable and has the most space for apps. By stable, i mean i can install it and use it for 2-3 months with daily use. And i have about 100Mb of apps on my G1 so i'm looking for a rom with a lot of space.
And last question, If i want to unroot and go to the official 2.0 software when it comes out (doubtful, but i may) are there any guides to go about unrooting, searched but couldn't find anything that was very clear.
Thanks in advance. now if only the phone would hurry up and get here so i can stop using my g1 that has to reboot every 3 hours.
neok44 said:
From my understanding, the 32B is the T-mobile mytouch and is exactly the same as the g1. which dosn't make me too happy. But if this is true, does it have anymore space for apps or is it the same 70MB bull****?
Click to expand...
Click to collapse
The myTouch has more space for apps, over 100MB, but I don't exactly remember how much. I've had the phone for a week now and it's definitely better than the G1, performance wise.
neok44 said:
so i'm ditching my G1 because it barely works anymore. apparently theres something wrong with the motherboard and thats why any rom i install fails after a week and makes the phone unusable (even cranogen's rom died on my phone)
anyway i'm hoping to have better luck with the mytouch and with researching lately i've seen all this stuff about the 32a and 32b
As far as rooting goes, to my understanding, i just use this:
http://forum.xda-developers.com/showthread.php?t=556200
Then toss whatever rom i want on the SD and i'm pretty much good. That right?
From my understanding, the 32B is the T-mobile mytouch and is exactly the same as the g1. which dosn't make me too happy. But if this is true, does it have anymore space for apps or is it the same 70MB bull****?
second question. I love the hero/sense ui and i'd love to use it on the myTouch. So i know the question people hate to hear but if without having to read through hundereds of post i'd like to know which one is the most stable and has the most space for apps. By stable, i mean i can install it and use it for 2-3 months with daily use. And i have about 100Mb of apps on my G1 so i'm looking for a rom with a lot of space.
And last question, If i want to unroot and go to the official 2.0 software when it comes out (doubtful, but i may) are there any guides to go about unrooting, searched but couldn't find anything that was very clear.
Thanks in advance. now if only the phone would hurry up and get here so i can stop using my g1 that has to reboot every 3 hours.
Click to expand...
Click to collapse
if you are running cyanogen on your mytouch, you have about 290MB to download apps. Try running Qtek's Hero v1.8, just make sure that you have your three partitions. If you want to upgrade to Eclair (2.0) if and when it comes out, I suggest you wait until a rooted version of the ROM is released because if you just upgrade, you will be without your Superuser access and you will just have to root your phone all over again. But I have had the mytouch since it first came out and I had the G1 before then. It definitely blows the G1 out of the water in terms of performance in my opinion. Though I still use apps2sd, the extra memory was very handy before the phone was able to be rooted. I had about 100 apps on there and I still had plenty of memory left.
thanks for the replies. the 290mb is amazing. I'll probably be running one of the hero roms, and thanks for giving me a recomendation. I just love the sense UI so much.
Glad to hear about the boost in performance as well.
So i take it that the rooting process is just like i said since no one mentioned that. Really looking forward to getting this phone and finally ditching the G1
neok44 said:
thanks for the replies. the 290mb is amazing. I'll probably be running one of the hero roms, and thanks for giving me a recomendation. I just love the sense UI so much.
Glad to hear about the boost in performance as well.
So i take it that the rooting process is just like i said since no one mentioned that. Really looking forward to getting this phone and finally ditching the G1
Click to expand...
Click to collapse
How to un-root a tmobile MT3G in about 4 minutes. I followed this and it worked perfectly.
http://theunlockr.com/2009/08/22/how-to-unroot-your-mytouch-3g/
thank you for that. got it bookmarked now. hopefully getting the phone today. can't wait to get started on it. looks like this will be a much better experience than the g1.
The Post here has a full guide of Rooting/Unrooting and links to a guide for Goldcards. There is another guide for rooting without goldcards but it doesnt show how to unroot or return everything back to stock. Hope this helps.
http://forum.xda-developers.com/showthread.php?t=547133
Quick tip from a Magic user:
Don't update your phone (which will probably come with Cupcake 1.5 as stock) to Donut 1.6 using OTA, if it asks you to. Rooting Donut is a much lengthier process than rooting Cupcake, especially as you're wanting to run a Hero/SenseUI rom.
As you seemed to be hyped about memory, evil D:'s nano SenseUI is apparently a v lightweight version.
JackMagic said:
Quick tip from a Magic user:
Don't update your phone (which will probably come with Cupcake 1.5 as stock) to Donut 1.6 using OTA, if it asks you to. Rooting Donut is a much lengthier process than rooting Cupcake, especially as you're wanting to run a Hero/SenseUI rom.
As you seemed to be hyped about memory, evil D:'s nano SenseUI is apparently a v lightweight version.
Click to expand...
Click to collapse
I got it used from craigs list so the guy had already updated it to 1.6.
And i saw your posts in the one-touch-root topic. any chance you can explain to me how to get it to work on 1.6?
and thanks for the recommendation for the hero rom.
Relentless Rooter didn't work for me, I used it to access fastboot and then flashed to an Engineering SPL.
As far as I know, an Engineering SPL will let you flash to any ROM using the fastboot > recovery > update.zip method as Engineering SPL allows you to use fastboot with the android sdk.
I'm not really qualified to explain to you 100% what to do, but I did this:
http://forum.xda-developers.com/showthread.php?t=576768
You would just cange the official ION rom with a senseUI rom, i think.
JackMagic said:
Relentless Rooter didn't work for me, I used it to access fastboot and then flashed to an Engineering SPL.
As far as I know, an Engineering SPL will let you flash to any ROM using the fastboot > recovery > update.zip method as Engineering SPL allows you to use fastboot with the android sdk.
I'm not really qualified to explain to you 100% what to do, but I did this:
http://forum.xda-developers.com/showthread.php?t=576768
You would just cange the official ION rom with a senseUI rom, i think.
Click to expand...
Click to collapse
thanks for the link. hopefully everything will go fine for me.

32b Mt3g sense ui alternative?

Hey guys, sorry if this turns out to be a topic that's been brutally repeated.
I've been lurking around here for a while, i've tried many roms and from all of them, found that SuperMagic (eugene373's) was quite possibly the fastest in my case. (Thank all the devs for their contributions, you're all amazing!)
Now though i love hero roms, i wanted to see if i could get a magic rom that had senseui, much like our distant 32a cousins.
I've been reading around and the only alternative i see at the moment is by QTeknology's 32b port over. (Which right now doesn't support wifi or bt, hoping that changes)
I'm currently running 1.6 cyan 4.2.5, because i can't get over the speed problems with hero roms.
I was wondering what my fellow mt3g users are doing as an alternative for not having a release from HTC for senseui?
did you fallow the exact specs that Eugene asked people to use like the swap partition and a class 6 sdcard an ext partition on the sdcard... you will most definitely not see a sense/hero ROM that is for the mytouch 3g tmobile phone cause we got screwed with the 32b board which a insignificant amount of ram that is needed for the sense ui to run fast I liked hero_over mt3gv.2 that was what I used to use but phone got stolen so I decided to try 1.6 out and liked it enough to leave it but I fallow the hero builds closely as I plan to switch back over some day
Yup, that's my Achilles' heel, i still have the stock SD card. Yeah. the 32a board having more memory makes the 32b seem like a jib.
I'm doing the same thing, waiting for something to come close. I did try Qtek's port, as i said earlier.
Quite possibly the fastest that i've ran into. If someone can get Wifi working with it, i'll settle for that build or one like it. I hope Someone gets it working!
you can always do hero. it's basically the same thing as senseui. qtek's is one of teh best and the only thing not working is bluetooth.
You sure about that? i flashed it yesterday and wifi wasn't working. it turns on but doesn't connect.
prophetjinn said:
You sure about that? i flashed it yesterday and wifi wasn't working. it turns on but doesn't connect.
Click to expand...
Click to collapse
Are you talking about his senseui port, or the actual hero? His 1.8 hero cuz that is what I am running right now. I have wifi connected right now as well.
Oh! Different rom then, hehe. Come to think of it, i haven't tried his Hero rom. Only his port.
I should give it a try. I was getting ready to give it another try and play with the apn settings to see if that was the problem.
Edit: Qteknology Hero (WWE Dump) for G2 Magic-Voda 32B v1.8 Swap <-- This one, right?
Edit again: That was it, i'll give it a try, Thanks for hte heads up, Tazz.
prophetjinn said:
Oh! Different rom then, hehe. Come to think of it, i haven't tried his Hero rom. Only his port.
I should give it a try. I was getting ready to give it another try and play with the apn settings to see if that was the problem.
Edit: Qteknology Hero (WWE Dump) for G2 Magic-Voda 32B v1.8 Swap <-- This one, right?
Edit again: That was it, i'll give it a try, Thanks for hte heads up, Tazz.
Click to expand...
Click to collapse
yes. The apn's are not a problem with the wifi. you are going to have to add the apn so you can have your data with this rom, however. He doesn't have the apns set on this rom. So you should right it down if you do not know your apn settings. It'll save you some time.
I just took a look at his apn's conf on the hero rom, it's not in there, haha. I guess i'll just copy them there too. I assumed that they would be in there, but i guess they wouldn't be, this IS a vodafone rom, anyway. Thanks again for the heads up!
You can try Trojan final from Eugene, i havent tried many hero roms but im liking this one, its pretty fast and stable. I used overclockcpu and swapper in combo with it. It works like a charm. I do recommend putting the droid stock 32b over the original image as it will make it less woody and more hero.
anyone else experienced trojan final? im still waiting to hear wich one is fast, trojan or qtek . trojan does have everything working tho..
I've tried both, but on a very temporary basis. They're both pretty fast. But for some reason i still think supermagic was faster than both of them. i think it's probably because it doesn't have the default rosie. I dunno. They're both good, just not the kind of speed i'm looking for. when i pop settings or open the browser, i'd like something that's snappy.
Maybe i'm just too used to cyan mod at this point.
The only other senseui mod that was snappy was qtek's port for magic senseui. That's why i was really hoping wifi would work, but to no avail.
duskya said:
You can try Trojan final from Eugene, i havent tried many hero roms but im liking this one, its pretty fast and stable. I used overclockcpu and swapper in combo with it. It works like a charm. I do recommend putting the droid stock 32b over the original image as it will make it less woody and more hero.
anyone else experienced trojan final? im still waiting to hear wich one is fast, trojan or qtek . trojan does have everything working tho..
Click to expand...
Click to collapse
he has bluetooth working, but only if you flash over the 32A radio and recovery image. If people don't know their way around fastboot, they will brick there phone.
I can't even get fastboot to work lol. I'm thinking i have a driver issue. I boot into fastboot, says "fastboot usb" i tried to change the bootscreen menu, all it says when i try to flash over the first image is "waiting for device"
So i figured i wouldn't even mess with customer radios and different board radio/recoveries.
I don't even use BT, so i dont see a need to bother changing over to 32a setup.
Can someone PM me some 32b roms? or where you get them for Mytouch.
I wonder if i use the 32b to 32a radio method eugene has, if i would be able to flash 32a roms (32a rogers sense ui magic rom).
prophetjinn said:
I wonder if i use the 32b to 32a radio method eugene has, if i would be able to flash 32a roms (32a rogers sense ui magic rom).
Click to expand...
Click to collapse
That wouldn't do anything for you. The advantage of 32A is that it has more RAM. 32A ROMs would run slowly on a 32b.
If i'm not mistaken, it requires less memory to run a 32a sense ui rom than a hero rom.
Correct me if i'm wrong.
prophetjinn said:
If i'm not mistaken, it requires less memory to run a 32a sense ui rom than a hero rom.
Correct me if i'm wrong.
Click to expand...
Click to collapse
even if thats true, i dont think either would run acceptably well on 32b. the mytouch came out over a year after the g1 yet tmobile didnt give it any more ram they just made it look different (and added rom but its not even worth mentioning). TMO just put the same turd in a different toilet, the mytouch just doesnt have the ram to handle any type of hero/sense ui.
Im really curious as to how much it costs tmobile to offer 192mb ram as opposed to the 288mb ram the magic has. They better have saved a hell of a lot of money.

How do I go about finding out which myTouch 3g phone I have?

I apologize if this has been posted, but I couldn't find the thread if it already exists
I have a t-mobile myTouch 3G and have come to the realization that I'm impatient and don't want to wait another 3 weeks for the Galaxy S to be released, and I really want to play around with Android 2.1 or 2.2 a bit over this long weekend.
However, I have no idea how to figure out which version of the myTouch 3G that I have, nor do I have any idea as to where to start looking for instructions. I'm looking to find out how to load a different rom as well as a list of roms for this particular phone that have good reviews and are stable.
Again, sorry if it's already been posted, I just can't find it. I'm new here (although I registered years ago,) so I apologize for the basic question.
Thanks!
Ian
Switch phone off and hold back button and power button, will give you fastboot and details you want.
Great -- thanks for the info.
Here's what it says:
My Phone said:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0007 (SAPP30000)
CPLD-10
RADIO-2.22.23.02
Jul 31 2009,15:49:25
Click to expand...
Click to collapse
Is that all of the info I need to begin my search? If so, do you have any suggestions (or links to threads) that can get me started?
Thanks!
Ian
start here
http://wiki.xda-developers.com/index.php?pagename=HTC_Sapphire_Hacking
sike89 said:
start here
Click to expand...
Click to collapse
*Exactly* what I was looking for.
Thanks to everyone, this is a very helpful community.
Ian

MT3G 1.2 Senseui help...

I have used the search ahead of time, and was unable to find anything that explained what I was looking for, beyond a redirection, which I was unable to follow, so I did my best.
I am familiar with flashing, since I started with my Kaiser a few years ago, so I'm not null, but I do like to have a reliable bit of help to make sure I get it right the first time.
Now for my question. I really enjoy Senseui, and would love to have it on my MyTouch 3G 1.2 which is rooted, currently running the stock Fender ROM, and pretty much the same as the day I bought it. I've noticed there are a few ROMs in the Sapphire section that have sense, but require the 1.76 SPL and the 6.35.x.x radio.
When I look into flashing those, I continually find that my phone (MT3G 1.2) either can't or won't accept these requirements. The closest to a solution I've been able to track down mentions using a Hero recovery. I've exhausted myself trying to figure this out, I constantly search for updated ROMs, and any possible updates that would make my day, but I'm not seeing it happening, so I'm coming to you all for some help.
If you know how to get a Senseui ROM on to a MT3G 1.2, and can explain it, redirect me to a thread I couldn't find, or some other form of helping me out, it'd be greatly appreciated.
Again, my apologies if this is an unnecessary post, but I have used the search button, several times.
Here's my phone info, as it stands now...
Sapphire PVT 32A Ship S-ON G
Hboot-1.33.0013 (Sapp31000)
CPLD-13
Radio-2.22.23.02
I personally don't think flashing a new Radio or Recovery if you don't know if it works isn't worth the risk. However, there are two Sense UI ROMs compatible with the Mytouch 1.2 located here and here. It's disappointment that there are only 2 Sense UI ROMS, I wish there were more.
C0dy said:
I personally don't think flashing a new Radio or Recovery if you don't know if it works isn't worth the risk. However, there are two Sense UI ROMs compatible with the Mytouch 1.2 located here and here. It's disappointment that there are only 2 Sense UI ROMS, I wish there were more.
Click to expand...
Click to collapse
Yeah that..
Not quite Sense UI
But Try CM6R2 with the Vatsense theme+Fancy Widget or if you want weather animation Beautiful widget+beautiful live.. He has the stuff to make Launcher pro look like Rosie, but ADW now has a Rosie theme in the market(Slide sense)
Someone please explain to me why SenseUI is so special on a device that it is not specifically designed for it? Really. You won't have bluetooth and in some cases, camcorder, wifi, gps, etc. If you want a stable device use a rom without SenseUI.
But if you insist just use one for the G1.
I haven't even bothered to port anymore over because I got so tired of the private messages asking me how to get bluetooth working, how to make it faster and how to install it. I'm not going to lie... I enjoyed getting $25 in donations but it just wasn't worth it so I gave it up.
Binary100100 said:
Someone please explain to me why SenseUI is so special on a device that it is not specifically designed for it? Really. You won't have bluetooth and in some cases, camcorder, wifi, gps, etc. If you want a stable device use a rom without SenseUI.
But if you insist just use one for the G1.
I haven't even bothered to port anymore over because I got so tired of the private messages asking me how to get bluetooth working, how to make it faster and how to install it. I'm not going to lie... I enjoyed getting $25 in donations but it just wasn't worth it so I gave it up.
Click to expand...
Click to collapse
the only thing i like about Sense is the flipclock+fullscreen weather animations(i used CR_slide for a day and never got around to trying your port between superD and CM5)
If I understood Java and all the Android programing i would start porting roms over to the MT3G 1.2 but i seriously cant even successfully make a ADW theme in Eclipse
Vonrottes said:
the only thing i like about Sense is the flipclock+fullscreen weather animations(i used CR_slide for a day and never got around to trying your port between superD and CM5)
If I understood Java and all the Android programing i would start porting roms over to the MT3G 1.2 but i seriously cant even successfully make a ADW theme in Eclipse
Click to expand...
Click to collapse
And you realize that there are apps that do that instead of having to have the full rom installed, right?
Okay, thank you all very much for the quick and thorough answers. I guess the reason I like the interface so much is because a lot of my friends have EVO's now, so I kinda grew used to seeing that, and I like how simple/clean it all is, and I was hopeful it would translate to being equally nice and useful on my little screen. Sigh, guess I'll just wait till T-MO gets some better phones, and hopefully that's only as far away as September, but I'm not holding my breath.
On a side note, I think that's my biggest upset with T-MO too, their Android support is quite lame. All the other carriers are rushing to get froyo to their users devices, and all we get is 'soon' over, and over, and over...
Anyhow, thanks again guys!
Yeah i listed the app i know of that does the animations *beautiful live*
As for sense ui on your 1.2 dude just wait the mytouch is upposed to get official froyo and possibly their version of sense *slide rom*
It might be worth the wait if you want
Sent from my HTC Magic
I really hope that we get a mytouch slide/ sence ui update but I honestly doubt that they would even bother with going through all the work to debug it for our phones.
So I know that this is completely off topic but is there any way that we could do this to our 32a 1.2s? http://forum.xda-developers.com/showthread.php?t=580486
I know the answer probablly is no because someone besides me would of figured out if it worked by now but I guess it never hurts to ask.

[ROM Q] What is the latest or best (in your opinion) MIUI Rom for the EVO?

Just as the Title asks. I've looked but some threads are really old. So what do you guys think?
Also, what is THIS lock screen!? It's awesome and I love it!!!!!
Thanks in advanced guys and gals!!! Another thing i was looking for was those backgrounds with those sexy girls wearing headphones and it looks all artsy and ****. cant find the plain backgrounds anywhere....
Well the most important thing to know: a new build gets released every Friday form the Chinese team, then a English team ports it to EVO usually over the weekend for a weekend release. So every week there's a new build.
Latest _English_Port_ is 1.14 ... but 1.21 just got released today (revs are by date) BUT the Chinese team found a bug and is supposed to be releasing a patch tomorrow. The MIUI team responsible for porting the weekly builds apparently already ported the 1.21 but isn't posting it as a official build yet as they are waiting to see what the original dev team is releasing as a patch first.
I would say the current 1.14 is easily the most stable build, the new 1.21 coming out has some UI changes, so it could actually introduce bugs, but only time will tell. Honestly though MIUI has come a long long way.
I really like MIUI rom but not having multitouch on the gingerbread keyboard kills it for me. Hopefully they can get it working soon.
jxs1984 said:
I really like MIUI rom but not having multitouch on the gingerbread keyboard kills it for me. Hopefully they can get it working soon.
Click to expand...
Click to collapse
This 1.7 seemed to run the best for me with the included kernel 1.14 had a lot of reboots. I loved the UI and the built in extras like the traffic monitor and the blacklist options but found it too unstable for me. I went to evervolv 2.3a15 and love it so far. Gps doesnt track as well as miui but its an apples oranges comparison. Basically if you can get a stable daily driver miui going on your evo then enjoy olit. The thread in the general section has a lot of believers for sure.
so far 1.14 has been the most stable for me, but myself and many others have been experiencing a problem where whoever we are talking to hears an echo of their voice. The devs are gonna try to work that out for the next build which should be awesome. I'd wait till the final of 1.21 is released.
_MetalHead_ said:
so far 1.14 has been the most stable for me, but myself and many others have been experiencing a problem where whoever we are talking to hears an echo of their voice. The devs are gonna try to work that out for the next build which should be awesome. I'd wait till the final of 1.21 is released.
Click to expand...
Click to collapse
Okay, so after looking over MIUI and the themes and lockscreen mods I REALLY REALLY REALLY REALLY RREEAALLLLYY WANT IT!!!!!
But...there's just one problem...
After looking over the directions, and the HBOOT S-OFF thing, nothing seems certain. So many different sites and threads say that some this way doesn't work, this way breaks your 4G, and I can not for the life of my find out how to simply just get MIUI on my flipping Evo! To be honest, from everything I've looked up so far it looks like a ****ing death trap. No joke.
And whats up with partial English? From what I've seen things look like they're in English. How much is still in Chinese?
Is there anyone out there that can show me (or tell me) a very direct way and not an "iffy" way of flashing MIUI. I have Clockwork and I don't know how to check to see if I have S-OFF. I got my Evo 4G the day it came out, so does that mean the way I rooted it back then turned S-OFF for me?
I thought S-OFF was only for people who got the new OTAs and couldn't root their Evos.
I'm sorry but MIUI ust confused the HELL out of me and I'm so willing to take a leap of faith because I want it so bad, but bricking or messing up my Evo ust isnt worth it. Help anyone?
My whole ROM is in english. I'm using the current stable release and it's the best ROM I've used after UD.
The one thing I noticed is that my 3G speeds seem to be slower. I'm on wifi a lot so it isn't too big if a deal but still annoying.
Sent from my PC36100 using XDA App
thelovatscout said:
Okay, so after looking over MIUI and the themes and lockscreen mods I REALLY REALLY REALLY REALLY RREEAALLLLYY WANT IT!!!!!
But...there's just one problem...
After looking over the directions, and the HBOOT S-OFF thing, nothing seems certain. So many different sites and threads say that some this way doesn't work, this way breaks your 4G, and I can not for the life of my find out how to simply just get MIUI on my flipping Evo! To be honest, from everything I've looked up so far it looks like a ****ing death trap. No joke.
And whats up with partial English? From what I've seen things look like they're in English. How much is still in Chinese?
Is there anyone out there that can show me (or tell me) a very direct way and not an "iffy" way of flashing MIUI. I have Clockwork and I don't know how to check to see if I have S-OFF. I got my Evo 4G the day it came out, so does that mean the way I rooted it back then turned S-OFF for me?
I thought S-OFF was only for people who got the new OTAs and couldn't root their Evos.
I'm sorry but MIUI ust confused the HELL out of me and I'm so willing to take a leap of faith because I want it so bad, but bricking or messing up my Evo ust isnt worth it. Help anyone?
Click to expand...
Click to collapse
Well, if you have flashed a custom recovery(Clockwork), then I think you must have s-off. The easiest way to check your s-off status is to turn your phone off, then reboot by holding down power+volume-down. The phone will boot into the h-boot screen. At the top will be several pieces of info including your s-off or s-on status. Make sure you do not have any custom roms or other .zip files in the main directory on your sd card before you do this as the hboot will try to flash it when it detects it.
The very first post in the general forum has a lot of really good info as well. Another excellent helpful resource is the IRC channel for the Evo. The link is in the post.
S-off just means security off, by the way. You can't flash custom roms or other stuff until you have s-off.
gqstatus0685 said:
My whole ROM is in english. I'm using the current stable release and it's the best ROM I've used after UD.
The one thing I noticed is that my 3G speeds seem to be slower. I'm on wifi a lot so it isn't too big if a deal but still annoying.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Really?! All English!!?? Can you please send me a link to the ROM you're using. I think I saw at least three different MIUI threads in the ROM section and I don't know which one to choose. Link would be amazing!
Pierceye said:
Well, if you have flashed a custom recovery(Clockwork), then I think you must have s-off. The easiest way to check your s-off status is to turn your phone off, then reboot by holding down power+volume-down. The phone will boot into the h-boot screen. At the top will be several pieces of info including your s-off or s-on status. Make sure you do not have any custom roms or other .zip files in the main directory on your sd card before you do this as the hboot will try to flash it when it detects it.
The very first post in the general forum has a lot of really good info as well. Another excellent helpful resource is the IRC channel for the Evo. The link is in the post.
S-off just means security off, by the way. You can't flash custom roms or other stuff until you have s-off.
Click to expand...
Click to collapse
Wow. That cleared up quite a bit! I'm pretty sure I have a few custom ROMs in the main directory of my SD but when I flashed HBOOT it didn't automatically do/flash anything. I checked and I had S-OFF, I guess it was obvious.
So MIUIs flash ust lke any other ROM...?
comment to ur comment earlier- the most up-to-date "stable" rom is always going to be the that they have stickied.
Wow. That cleared up quite a bit! I'm pretty sure I have a few custom ROMs in the main directory of my SD but when I flashed HBOOT it didn't automatically do/flash anything. I checked and I had S-OFF, I guess it was obvious.
So MIUIs flash ust lke any other ROM...?
Click to expand...
Click to collapse
yes they just flash like a normal rom. But since they do release an update almost weekly, it would be hard to do a complete wipe everytime and titatium back up everything. so miui already has a Miui Backup program in it that will make changing to the next release go smoothly without much of a hassle.
I flashed the MIUI ROM last night and my phone rebooted on its own like a handful of times when I was sleeping. I kept hearing the vibrate sound and seeing the white "HTC EVO 4G" screen like when you first turn on the phone. NOT happy!!
I had the same thing happen to me I love the rom but that's why I went back to my warm rom
Sent from my PC36100 using XDA App
mikeDCMDVA said:
I flashed the MIUI ROM last night and my phone rebooted on its own like a handful of times when I was sleeping. I kept hearing the vibrate sound and seeing the white "HTC EVO 4G" screen like when you first turn on the phone. NOT happy!!
Click to expand...
Click to collapse
Make sure in WiFi setting you have it set to never sleep while on Wifi and your reboots should go away.
elbacker said:
Make sure in WiFi setting you have it set to never sleep while on Wifi and your reboots should go away.
Click to expand...
Click to collapse
Thanks! I just read that on the MIUI Forum's also, I'll give it a shot!
Im in love with all the new kingdom roms running virus 1.1 kingdom port
Virus for the win but yea miui is awsome but I just can't get away from sense
I really want to try MIUI, but without 4g, its a deal beaker, looking forward to it though.
Sent from my PC36100 using XDA App

Categories

Resources