Related
When I have my cingular 8125 connected to my desktop and activesync is running, I can't connect to anything on the internet with my PDA.
I'm accustomed to being able to do that and my previous PDA devices used activesync and the PC's internet connection to do that. Can the 8125 not do that?
Yes, the 8125 and other variants of the Wizard can use ActiveSync's "passthrough" function using port 5721, so it's definitely not exhibiting normal behavior.
ActiveSync is syncing ok? Do you get the two back and forth arrows icon on top (indicating a passthrough connection)? What happens when you try to browse?
I confess I haven't seen this before but I would start by opening a command prompt on your pc. Type the command
telnet 169.254.2.2 5721.
If it returns "Connect failed" you have some software blocking the connection -- possibly firewall since it's the often the culprit in AS connectivity issues, but possibly other sync software, or vpn.
You might try disabling your startup items using msconfig then see if it works -- go to start > run > msconfig.
On the General tab, click Selective Startup, then uncheck the Load Startup Items box. Then click the Services tab, check the box that says Hide All Microsoft services, then disable the remainding services. Reboot.
You'll need to run AS manually once it's booted then see if it will let you use the passthrough connection.
Well, it syncs just fine. It just doesn't get the passthough connection.
The telnet works just fine also.
Interesting. What does it do when you try to browse using the passthrough? Does it try to open a gprs connection instead? Does it give an error message?
It errors out with a message: "The page cannot be displayed because the connection was lost. Please try again."
Some more information.
When connected via activesync, I can check email. It's only the pocket IE that can't get to anywhere.
Any ideas?
i'm hating activesync 4.1, it disconnects halfway through a file transfer then renders my device unuseable til i soft reset and makes my pc not shut down without unplugging it :x
Ive done all the firewall settings etc but it still doesnt work properly, i can only stay connected to my pc for about 3 mins.
Guess im gonna have to buy a card reader :roll:
dmonik said:
i'm hating activesync 4.1, it disconnects halfway through a file transfer then renders my device unuseable til i soft reset and makes my pc not shut down without unplugging it :x
Ive done all the firewall settings etc but it still doesnt work properly, i can only stay connected to my pc for about 3 mins.
Guess im gonna have to buy a card reader :roll:
Click to expand...
Click to collapse
Out of curiousity, are you syncing with bluetooth or USB?
with usb, i also have wifi in the house but it wont log on to that either :roll: it finds it ok (and next doors hehe :twisted: ) but thats as far as it'll go. it wont accept the network password (im using the pkey method)
ive done all the stuff suggested by m$oft but nothing seems to help. it could be an issue with my home network stealing the bandwidth apparently-does this sound right? i never had a problem with my ppc2003 ipaq on active sync 3.8 but now that wont work either without cutting off after 3 mins.
why does m$oft crap never work
When the Wizard is connected and the Activesync box shows on your Computer, when u go to File > Connection settings.
Is the tab "This computer is connected to:"
set to "the internet"
Cuz that was the problem with mine. I set it to internet, and voila!, hello world wide web.
i only want to transfer music+videos+photos etc, not bothered about syncing the other stuff like contacts or using it to go online as im on an unlimited data tariff anyway
I'm having somewhat similar issues to the OP. Activesync Sync's fine, I can transfer files to/from the phone...however Passthrough doesn't work. I've disabled my firewall, and checked and rechecked all the settings on the PC and the Phone with no luck. If anyone has anything to suggest please let me know.
-AnarchE
I hope it's ok to ask this question in your thread. It regards activesync and outlook. My problem is that I can not add a calendar event with any text added to the note field on my cell phone (Cingular 8125) and have it sync to Outlook on the PC. I always get an "attention required" message followed by a error code: support code 1.
If I only have a calendar topic and location without any notes, it syncs up fine. Or I can add an event on the PC and have lots of notes and it syncs to the phone just fine...but not vice versa.
Just wondering if any of you have a similar issue - I have Activesync 4.2 and Outlook 2002
Incidentally, I can surf thru my phone when connected usb to my Dell Inspiron notebook.
thanks
Hi,
I have a really weird issue. I'm really flabbergasted about this one, I think this is a tricky one.
But maybe some can help me out.
I've got a Qtek 9100 with the latest official firmware (2.18.7.6 NLD) so a dutch version.
I use a company SIM card wich has GPRS disabled so I have to use WIFI for internet.
Everything goes well (both browsing as well as email).
But then when I sync my agenda/contacts (none of the other items) with active sync (I tried 4.1 and 4.2) then email doesn't work anymore but WIFI is fine: I still have an IP and I can browse.
The error I get is that the device cannot set up a connection and wants me te set up a modem connection profile (wich I don't have since I only am allowed to use wifi).
Again this error is reported by the emailclient (tmail.exe) but IE works fine!
So somehow after a sync-action with active sync the email client wants to use a GPRS/CSD connection to read mail. I never told it to do so!
I tried the following to solve this issue but with no result:
- I used Memmaid and Check Notifications to find any problems but that was ok.
- I deleted all profiles in active sync (both on the PC as well as on the Qtek).
- I disabled the phone functionality (I hope the phone would understand not to use GPRS/CSD)/
- I tried a soft-reset
The only way to solve this is by a hard reset, but then I have to sync again and I'm back at the beginning of my problem.
Can anyone help me please! I'm desperate.
THanks in advance
Hi,
i have a problem with the Live Services on my Xperia (Vodafone branding, Germany). Even if WLAN is active and I have no problems in going online with Opera or IE, Live Services (Messenger, Live Search etc.) still want to connect over GPRS.
I tried to set up a default internet profile, only using WLAN for every program in the network manager but Live Services don't care. They automatically activate data connection if it is set to off.
I read about a workaround for this issue in this forum (but for different devices), which said to cancel the GPRS connection as it tries to connect, while WLAN is active; but this workaround doesn't work. In this case I get an error message that the connection did not success.
The interesting issue is that most of the XPeria users obviously have the opposite problem, that they cannot open up a connection via GPRS for Live Services...
Has anybody a suggestion, about getting Live Services online via WLAN?
Thanks for any help..
tufi.
ROM-Version: 1.02.162.6
ROM-Date: 09/17/08
Radio: 1.06.25.29
Protocoll: 52.43.25.24U
Ext. : 1.0.45046.11179
.. i just figured out that, also windows update function wants to use GPRS, eventhough I'm connected to my wireless LAN..
I have the same ******* thing. Here how I work around it
1) terminate Messaging
2) close Data connection (gprs/edge)
3) start wifi
4) Start -> Programs -> Windows Live (shortcut)
5) Synchronize from Windows Live Panel
thanx for the rapid answer. I'll give it a try. But I'm pretty sure this will not work in my case; I think, I do follow these steps in general. Data connections are always off, and Messaging is only active if I really write an SMS.
The steps 3-5 are also the usual way when I try to connect with Live Messenger.
Nevertheless I will take care of them and try..
double postet the message
x-X-x said:
I have the same ******* thing. Here how I work around it
1) terminate Messaging
2) close Data connection (gprs/edge)
3) start wifi
4) Start -> Programs -> Windows Live (shortcut)
5) Synchronize from Windows Live Panel
Click to expand...
Click to collapse
hi,
I just tried the workaround. But as I clicked synchronize from Windows Live Panel, this also turned GPRS on and tried to connect. Cancelling the GPRS connection led to an error message, which told me, I should make it sure, that data connection tarif is supported by my provider..
I keep getting this message despite turning on wifi, gprs... what should I do?
Windows Live was unable to establish an Internet Connection. Please check your Internet settings and make sure that you have access to data services under your billing plan. If you need help, please contact your mobile service provider.
the vodafone support hotline says, Messenger can only run in 3G mode. So the problem is officially a vodafone branding problem.
Does anybody know any chance to get rid of the built in programs without flashing the rom?
I got the same problem. And I used another ROM. Messenger can be available via WIFI.
@benny
which rom version did you use? did you flash it yourself?
http://forum.xda-developers.com/showthread.php?t=454305&highlight=vodafone+messenger
incase anyone hadnt found that.
works for me! (UK, Xperia & Vodafone branded)
good luck.
use the no data cab
Hi
For some reason today when I connected my phone to my laptop I couldn't get an activesync connection. It went straight to internet sharing (without me selecting this)
No matter what I do I can't get an active sync connection.
- I've restored the phone to a previous point when I know they were both working
- I've enable active sync as default when I plug into my laptop rather than having the 3 options (active sync, disk drive & internet sharing)
- I've clicked the shortcut for active sync in the start menu but it the sync button is greyed out
I haven't changed anything on my phone in weeks and have been using internet sharing and active sync during the past few weeks.
I'm using Energy Rom 6.5 but have been for the last month without this issue. I'm stumped and I desperately need to be able to use active sync.
Please help me!!!
with the same ROM I had the opposite problem: adsl here at work is not working at the moment, hence my phone is teh only way to connect our small office with the internet.
Recently to me was happening to connect the phone, selecting internet sharing, and the damn thing (ActiveSync) was ALWAYS starting.
I am sorry because I really loved that ROM, but because of the cronic lack of memory and few bugs I moved to another WWE ROM done by a spanish guy (the one in my signature) and now everything works fine.
Also, I can receive phone calls during the internet connection!
My ActiveSync won't Sync
I found with "Enable faster data synchronization check box" ON then doesn't even start ActiveSync on PC. Instead the LAN icon starts searching for an IP.
if OFF then it tries then ActiveSync says ERROR code 85010001
this page
http://www.pocketpcfaq.com/faqs/activesync/exchange_errors.php
says An invalid HTTP communication or protocol syntax occurred.
reboot doesn't help.
Are you sync to Exchange of PC files?
if Exchange, try turn off push update, sync, and turn it back on.
sounds like it's stuck in modem mode or something.. have you tried switching between modes? e.g. put it in modem mode and disk drive and then activesync again..
no Exchange
turned off all except contact/calendar
tried disk drive and then activesync but no good
then tried turning bluetooth off and it worked with with "Enable faster data synchronization check box" off
so still not perfect
The more complex, the more can go wrong. Recently my HD2 has not been running activesync on connection. It is a problem after I have hibernated my PC, but also randomly at other times after a disconnect and reconnect.
Following hte advice above I've tried the change to modem, change to disk and back to activesync, but that did not help. Unchecking the "Enable faster data synchronization check box" has now allowed it to connect.
While activesync was unable to connect, I could still connect using a brilliant little program, sadly not recently updated, called mymobiler. That lets me control the HD2 from my PC< and do screen dumps as well. So how come that would connect but MS Activesync would not? And it was not a new install, I've had that since my first few days of the HD2 and worked well until the last couple of weeks, when this issue has become increasingly annoying.
While activesync was telling me I was disconnected, in the Windows 7 Devices and Printers there was an icon for a "Generic RNDIS" but nothing else about it. When on the HD2 I go back into USB to PC and check the tickbox for "Enable faster data synchronization" that icon reappears. Maybe disabling then enabling this check box has sorted it. Time will tell.
Hmmm...
It is not a new issue with activesync and htc phones. This thread is a year old.
In fact a search of hte web shows htis is common across several makes of phone.
Damn. When I installed HTC's latest hotfix for SMS, it soft reset the HD2.
On restart, the HD2 was not recognised by the PC, but it does show in Devices and Printers as the generic RBIS. So; uncheck the "Enable faster data synchronization" and it appears on the PC as a Generic Serial device, then becomes a live device in the Mobile Device Centre. I guess we won't be using faster then.
What I don;'t understand is why both of the showings in the Devices and Printers are Generic. Surely there is a driver?
argh, now it's broken again, had BT on...
htc has no clue and suggests (again) that I just keep creating a new partnership each time I have this issue (daily)
Are you sync'ing to an external exchaneg server as well as locally?
I had an issue with mine that the external exchange and local seemed to clash some how, I deleted the external and all internal connections from the phone's active sync screen and then the local PCwas able to re sync, then added each of the other conections and made sure that there where no contradictions in the syncing rules?
Maybe not your issue but worth mentioning!
speakerphone said:
argh, nowt's broken again, had BT on...
htc has no clue
Click to expand...
Click to collapse
I regret this is incomprehensible. "nowt" means nothing, so you are saying that nothing is broken again. That would be good, not bad. Your post then stops part way through and concludes negatively against HTC, though for no reason whatsoever. Please could you repost with something that makes sense?
I have no exchange servers, just local PC,
but all errors are exchange related, so HTC say.
if you dont have an exchange server then remove it completely ftom the list of sync locations (i cant remember how you do this, but its the same screen where you select what you want to sync). ive found that if it isnt being recognised that removing the phone from device manager list in windows (deleting drivers/software if asked) and reconnecting the phone seems to work. i have my driver install set to use windows update to locate drivers so try this as well
HD2 won't activesync via bluetooth
My LEO do sync properly via USB. Not connect absolutely via BT.
my setting is :
internal GPS connect via COM4 to TomTom7, VisualGPSce, TutorAssist
and seems to be:
bluetooth port IN is COM1
bluetooth port OUT is COM2
In my Notebook the lonely Local port is COM5. No other one is available
ActiveSync Bluetooth connection is set on COM5
So i know this thread is way old but figured id give it a try. The screen cracked on my TP2 and I cant get WMDC to recognize my device to pull the data. I'm pretty sure that enable faster data synchronization is checked and my screens broken so i can't fix that. Is there another way I can access the phone? Any help is appreciated ty.