hi, my display has gone off on my xperia x10 the backlight still lights and keys still light up, but thats all i get, the phone loads and i can still recieve messages and phone calls because i can hear the notifications, i have taken this to a shop who said it was the lcd, so they replaced it, but the phone is still the same, im not covered on warranty because i bought it privatly, i also wondered if anyone knows, when you take th back cover off directly underneath the battery underneath the two screws at the bottom of the phone, something that looks like a long clip in thing, wot function this has on the phone because right at the bottom of mine the plastic has come away abit and i can see gold metal. thanks in advance for any help. also have have done a repair on pc companion and its made no difference,
Try asking in the tear down thread, i can't post you link right now since i am at work.
Sent from my X10i using XDA App
Related
Hi all, just recived my replacment handset ive ive just noticed at the bottom the suronding around the mini usb sticks out one side so its not flush with the rest of the phone, im sure on my other handset this wasnt there but not sure for deffenate.
Can anyone confirm this or is it just my phone
Thanks
Mine is the same - I think this is by design.
ok cheers mate, just cant remember it on the last handset
antlion said:
Mine is the same - I think this is by design.
Click to expand...
Click to collapse
Yep, this is standard. The Use connector housing is square and does not follow the curve of the casing.
Mike
Something I have noticed is that on my brand new replacement handset (serial number beginning HT643, my original handset was an HT634) the silver bezel which runs along the right hand side of the screen is recessed slightly - nothing major, but when my original handset's metal strip was flush with the plastic casing, you really do notice it (particularly if you're holding the phone in your left hand). Oh well, only a minor issue really!
christopherwoods said:
Something I have noticed is that on my brand new replacement handset (serial number beginning HT643, my original handset was an HT634) the silver bezel which runs along the right hand side of the screen is recessed slightly - nothing major, but when my original handset's metal strip was flush with the plastic casing, you really do notice it (particularly if you're holding the phone in your left hand). Oh well, only a minor issue really!
Click to expand...
Click to collapse
BUT maybe this is how they are solving the Screen alignment problem - DONT bend it. Only joking but you never know do you.
Mike
Not planning on it I did notice that JUST as I replaced my handset my screen alignment drifted out, which I corrected with a realignment (I had it replaced for another reason - people not being able to hear me after I'd gone through any call which involved entering numbers to an automated menu system, and then being on hold for a long time! for example... To the T-MOBILE CUSTOMER SERVICES PEOPLE! haha).
Very odd, hope it doesn't happen with this device. I won't go hacking the case to fix it though, I'm too lazy for that.
christopherwoods said:
(I had it replaced for another reason - people not being able to hear me after I'd gone through any call which involved entering numbers to an automated menu system, and then being on hold for a long time! for example... To the T-MOBILE CUSTOMER SERVICES PEOPLE! haha).
Click to expand...
Click to collapse
Thats one of the exact problems with my previous handset but mainly when on speaker phone
Really need help here,
My hermes suddenly decided that visuals are no longer needed.
That means the screens stays off all the time (yes even in bootloader mode).
It works, receive calls and flashes roms but in no situation can I see anything on the screen (pitch black screen).
I've got no warranty so I took it apart and checked each cable and connector - no issues were seen. I tried changing SPL-s, RUU, Roms all worked but left my tytn with that black screen.
Did anyone see this happen or has any advice?
This sucks big time :-(
No one? Oh man, I guess it's dead then :-(
Last bump before giving up and throwing it away - please?
send it to me if your gonna throw it away : - 0
I've given up on mine as well. It has white screen though. Where do I dump this thing?
If it is out of warrenty, I would take it apart as is sounds like the hardware, check the connections to the LCD. Does the backlight still work, or if you put it in strong sunlight, can you see the LCD working?
My Hermes had a white screen also. I found that if I squeeze the bottom right hand corner whilst resetting it would sometimes work. It seems there is a chip on the switch board that needs the right ammount of pressure on it. I think it was a design flaw as the herm200 and 300 are different. If applying pressure works and you are confident enough take the hermes apart and put a couple of small pieces of plastic or paper between the front buttons and the small square chip on the switch board. This worked for me.
The service guide is available if you google. Let me know if you need more info.
As for the black screen that sounds more serious sorry not seen that one.
what are you guys willing to sell your pdas for? Mine fell in a puddle and i need one for parts. The white screen might be fixable the first couple of times but then it dies off for good, the black screen i've never heard of.
So if you want to sell for a reasonably cheap price let me know, i can buy a new keypad online for $50. So around there would be nice!
i.a.wright said:
My Hermes had a white screen also. I found that if I squeeze the bottom right hand corner whilst resetting it would sometimes work. It seems there is a chip on the switch board that needs the right ammount of pressure on it. I think it was a design flaw as the herm200 and 300 are different. If applying pressure works and you are confident enough take the hermes apart and put a couple of small pieces of plastic or paper between the front buttons and the small square chip on the switch board. This worked for me.
The service guide is available if you google. Let me know if you need more info.
As for the black screen that sounds more serious sorry not seen that one.
Click to expand...
Click to collapse
I just tested this on mine and actually got some results.
mines the opposite though, it will NOT work with any pressure. I left all the screws loose for that board under the buttons, and left the LCD assemble screws out on that end and it works, But if I press the keys it whites out again and won't come back until I repeat the dis-assemble/re-assemble
I had a similar problem but this was after someone dropped mine on the floor. The screen would just be white screen, while everything worked. If I pressed the bottom right of the phone it would sometimes come on and stay on for a little while but would eventually always go to white screen.
I did manage to use the phone but had use a program called Net Control which allowed me to control the phone over WIFI with the phone screen shown on the PC. Got the phone replaced in the end by the people who dropped it.
i got the flex cable and my phone still has the white screen problem....wtf///
Like the topics states my 8125 will fade the screen every time I slide my keyboard open. It does it about halfway through the slide. Also practically non of the buttons on the front work anymore. I was told the ribbon cable may be loose, so I took it apart. I got all the way until the back of the screen seperates from the screen. I was pulling that apart and it didnt want to come so I just stoped in fear of breaking something. It was almost as if glue was holding a board on. Anyways I looked around as best I could and did not see anything. When I turned it back on it started right up but still fades out when slide open. Its been doing this for some time now and I just got back into the the cell phone thing rather then purchasing a new one. NBD ROM but the problem existed way before changing anything on the phone. Any help would be great. TIA
ttt anyone??
You will have to use a clipper preferably a plastic one to seperate the black back panel of the LCD housing,insert the clipper from the side and then run it along the entire panel till the six(i think) clamps unlock,then gently pry the back panel off taking care not to cut the flexi strip,that should do.It is most unlikely that it is a software issue,85% its a strip problem and 15% maybe because of the LCD.
Any chance you mean the ribbon cable when u say strip?
I have had the cable off and visualy looks ok.
any chance there is a replacement cable that I can purchace somewhere?
Hi guys, first post. So heres the problem. My HD2 screen is not glued properly to the base of the phone and it has a little space between them at the bottom right corner ( next to the Power button), whenever i press the screen to close the gap the phone freezes, and i have to remove the batery. It is getting really annoying couse i cant even put the damn thing in my pocket without it freezing. The hardware keys dont even work i just have to restart it. So my question is does any1 know of this problem and can he/she offer a way out?
Sorry for my english. thanks in advance
Sounds like it been opened before & had not the best assembly.
Would imagine hardware button ribbon is torn or pulled out of socket hence no buttons.
freezing issue could be down to issue with digitizer ribbon or button ribbon or worse ?
Do you have any issues with screen touch & do you know full history of the handset.
If black Void sticker is missing from case screw near battery pins then you know it been opened & most repairs including so called specialists are poor from ones I've seen.
I know this is the last thing you want to hear but if it were my device I'd take it apart and redo the assembly myself. Theres plenty of how-to videos with detailed steps. Hope this helps.
Sent from my SGH-T889 using xda app-developers app
Hi everyone one
I'm not sure this is the right section for my topic, if not I'm sorry and pls direct me.
So I got this phone from my brother whith a weid screen he has no idea how he got this problem, it had a charging issue that he already repaired after that this problem appeared
The phone screen looks a bit weird no scratches or visible damag. but the screen is blurry the contrast is a so hight that the colors are a bit off and are not seamless, and there is this stains as if the screen is brocken (see atached pictures), so far if I hide the upper bar the rest of the screen will looks normal as if there's no problem with it
Any Idea on how to fix this problem is the screen damaged ?
Thanks in advance
No fixing that I doubt, unless the cable for the screen is loose, in which case I still would not try to fix it yourself unless you're very patient and have steady hands.
To fix, you need screen replacement.
According to samsung technician at service center, the purple strain damage are caused by having the phone being press on or under high pressure such as putting the phone inside tight jean pocket or being sit on etc.
Sent from my SM-G935F using Tapatalk
Thanks for the help guys, I opened the phone and checked there is nothing pushing the screen or any visible damage
**update**
Good new the screen went back to wotk notmaly 3 4 days after wotking intensly with the phone using an app called twilight, it helps remove the stains when activated blut it's a blue light filter
Now the phone work well without that app
Thanks