Bluetooth headset disconnect during call waiting?!? - Vibrant General

My Vibrant has been disconnecting the motorola h710 whenever another call comes in while I'm on the line. I have to then use the phone itself to answer and then click headset on the device before it routes the call back to the headset. Another annoying issue is that it doesn't give an audible warning before it does this.
I'm wondering if this a normal operation of the phone? If it is, I may have to bring it back. Using bluetooth happens to be a big part of my phone usage.
I currently don't have access to another bluetooth to test but its proven to work fine on my 3GS and the Mytouch 3g.
Thanks

Related

How to transfer calls to Bluetooth Headset?

Hi, all.
Hope someone can assist me. I'm using an XDA II that has been upgraded to 2.06 Windows Mobile 2003 SE.
I have enabled the Bluetooth Headset profile on my Today screen and calls will transfer over to my headset (SonyEricsson HBH-65).
My question is for the following scenarios:
1) The calls transfer over but sometimes the connection becomes lost while I'm still mid-way in the call. How do I instruct the XDA to transfer the call to my Headset again? Tried pressing the button on my HBH-65 but the call doesn't transfer.
2) Sometimes, I put on my headset but forgot to turn it on. When a call comes in, I realise my mistake and answer the call on my phone first but then I ask the other party to wait while I turn on my HBH-65. After turning it on, how do I transfer the existing call to my headset?
Hope someone can help with some advice. Thanks in advance
1) I currently use BlueTrek G2 and so far has got no probs at all.
2) The BT headset has to be running before the phone in call. For the BT signal it has to be sent right b4 the phone in call.
I guess that's how you can get ur headset running.
I've got that to my best. Good luck...
No problem with them...
i am using BHB-65 too, they are great ,man, i have no problem with them from the first time using.
1. When you want to connect to the headset, there's an icon near the phone icon, you touch on that , it will indicate the term to transfer the call back the headset or cut it out.
2. When you forgot turning on the BT headset, just turn it on and press "enabled the headset" (on the desktop, remember to "view the profile" in item "Today"), it will automatically transfer the call to the BT headset.
Wish you could do that.

Bluetooth disconnecting during call

Wondering if anyone has had this problem. I haven't pinned a time down yet. I use a motorola car kit. It will disconnect and end the call for no reason. Is there a timer to auto disconnect in the bluetooth stack? Any help is appreciated.
approx 4minutes or less
I was having a problem w/mda and bluetooth and sometimes without bluetooth, in that the entire network would just drop when the call gets close to 4 minutes.... I called tmo about it and they simply gave up and said maybe its the phone...so they sent me a replacement mda, used it today during one call and couldn't believe that the call lasted longer than an hour...
Mine is only with bluetooth. I guess a little more info is needed. If I hit the voice dial button on my car kit I get the voice command tone. I have also used bluetooth to play music over the car kit with the voice command controls(just for fun, horrible quality). It will disconnect while it's playing music no call involved. I have a feeling it's the bluetooth connection timing out but I'm not sure. It's frustrating.
so its not happening during phone calls???
see there might be a bluetooth timeout that tmo doesn't know about...I have to use bluetooth and it seems like every 4min or less it blanks out everything and sometimes I even have to re pair the two devices.... I would try making calls and using the bluetooth w/o car kit...mine did some of the samethings like streaming music thru bt headseat and it would blankout with that also even when not on a call..
Car Kit Not Staying Paired???
I guess I wasn't clear. It happens in both situations. I think i have to re-pair after as well. As far as I know it doesn't stay paired. When a call comes in I usually have to wait about 2 rings before it rings through the car kit. Also when I make a call by hitting the voice dial button on the car kit the blue light blinks for about 2 seconds then I get the voice command sound. I assume that the blinking is it re-pairing. I guess I need info on how to keep it paired.
Anyone? I have found that time dosen't seem to be a issue as it has done it a 1min 43 seconds and 2 mins 38 seconds.
GreggSymington said:
Wondering if anyone has had this problem. I haven't pinned a time down yet. I use a motorola car kit. It will disconnect and end the call for no reason. Is there a timer to auto disconnect in the bluetooth stack? Any help is appreciated.
Click to expand...
Click to collapse
Try turning on the bluetooth first while your phone is off. Once the bluetooth is on, then turn on your cell phone. I tried many times in frustration why it is saying "phone is disconnected" looking for problems. Then it works now and even the phone book in my Nokia and Garmin GPS. Hope it helps you too.
Turn on bluetooth device first while the cell phone is off. Once bluetooth is on, then turn on the latter. Hope it works. Do it everytime you use bluetooth device in your car.

Bluetooth and Sony HBH-DS980

I have now tried 3 different bluetooth headsets with my AT&T Tilt with Stock Rom. First was my BlueAnt V12 I used great with my RAZR then I bought a Motorola S705 now I have Sony HBH-DS980.
With the BlueAnt V12 the audio was low and tinny and couldn't hear the caller
The Motorola S705 sounded good minor choppiness but the callers couldn't hear me worth a damn. Both of these devices paired great and kept connection, only the Motorola would loose connection if I got a system alarm or if I was streaming music. For just handset operation it worked great. With the Sony it seems to be a crap shoot when they are going to work. I installed JetWare to enable Caller ID Name and Ringtone through headset and when I pair them the first time they work great all day long. However if I turn bluetooth off on the phone and then back on I have issues with disconnecting and sound not going through headset for calls.
So I installed the new Official AT&T Rom from HTC's Site the other day hoping the bluetooth improvements they made would help. I decided to try JetWare again just to see if it worked, again I started having problems again. So I hard reset and didn't install the JetWare Extensions. For the first day everything worked great. Next day I fired it up it's up to it's old tricks of disconnecting after a call.
Anyone else having these issues? My state is going to be bluetooth only while driving in about 4 months so I really need bluetooth to work.
Can you charge the sony ds980 via usb?
No it has a real strange plug for charging
Hi, I have the Sony Ds980. I've experienced similar problems in the past.
check your Bluetooth settings on the phone: communication manager --> Settings --> bluetooth. Select your device (ds-980) but don't double click on it. and then check its mode: in that window, ensure that you have checkmarks in both options (i.e, Turn on bluetooth & make sure this device is visible to other devices). Sometimes, when you restart your bluetooth headset, the second option is left unchecked, thus causing disconnections between it and the device.
another option is to trigger the headset button. sometimes, when a call comes in, I would have to do this once or twice before it connects.
I think it is a bug.
i have the Jetware extension and MSVoice, and they help with the caller ID.
HTH,
rgds, Manny
I'm trying to decided between the DS980 and the Moto S9.
I'm so tired of wasting my money on crap.
Thanks I'll have a look at those settings, I just wish JetWare uninstalled nicely
I have been running it lately without JetWare and the only issue I am having this way is the wireless stereo portion disconnects after each Incoming call it does not do this if I place a call.
With JetWare I can sometimes keep it connected no matter what the issue is it connects but when I place a test call it rings on the headset but when I answer the call it isn't comming in on the headset it is still on the phone although the call button works and ringing on the headset works. It got to be a pain to have to place a few test calls to make sure the headset was working.
dalavar said:
Thanks I'll have a look at those settings, I just wish JetWare uninstalled nicely
I have been running it lately without JetWare and the only issue I am having this way is the wireless stereo portion disconnects after each Incoming call it does not do this if I place a call.
With JetWare I can sometimes keep it connected no matter what the issue is it connects but when I place a test call it rings on the headset but when I answer the call it isn't comming in on the headset it is still on the phone although the call button works and ringing on the headset works. It got to be a pain to have to place a few test calls to make sure the headset was working.
Click to expand...
Click to collapse
Well, that does it for me. The DS980 is officially off my list.

Answer without using bluetooth device

If I have a bluetooth device connected to my XV-6800, is there a setting or something I can do that will allow me to answer the phone with the call button on the phone, but have it connect to the bluetooth device? Right now if I hit the call button, it only goes through the phones speaker as if the bluetooth device was not connected. For me to answer a call using the bluetooth device, I have to hit the button on the bluetooth device.
Thanks,
Jeff
That's really strange. I know that I don't have the same phone as you (I have touch Elf). I have noticed this. When I have my device connected to bluetooth headset or my handsfree car kit, I can still hit the green call button to anser the phone when I get a call and the call is still transmitted to my bluetooth. I can even still make a call by hitting the green call button, dialing the number and still all through bluetooth.
It sounds like your device is not associating properly with the bluetooth device. Go into your bluetooth settings and check to make sure that you are connected properly for hands free - Go to settings - bluetooth and click on your device to make sure that hands free is checked.
I have also noticed that on a rare occasion, my bluetooth does not connect properly and although paired, does not transmit and sound did come through phone when it shouldn't have. To fix this, I did a soft reset and all was good. It happened to me about three times since I bought the phone in Dec 2007.
hotrod101 said:
That's really strange. I know that I don't have the same phone as you (I have touch Elf). I have noticed this. When I have my device connected to bluetooth headset or my handsfree car kit, I can still hit the green call button to anser the phone when I get a call and the call is still transmitted to my bluetooth. I can even still make a call by hitting the green call button, dialing the number and still all through bluetooth.
It sounds like your device is not associating properly with the bluetooth device. Go into your bluetooth settings and check to make sure that you are connected properly for hands free - Go to settings - bluetooth and click on your device to make sure that hands free is checked.
I have also noticed that on a rare occasion, my bluetooth does not connect properly and although paired, does not transmit and sound did come through phone when it shouldn't have. To fix this, I did a soft reset and all was good. It happened to me about three times since I bought the phone in Dec 2007.
Click to expand...
Click to collapse
The bluetooth is properly connected. When I make a call and hit the green call button, it does go through the bluetooth device. It is only when answering a call it does not go through the bluetooth device when I hit the green call button. Yes, very strange. Oh well, I was hoping somebody might have some insight.
Jeff
jeffgman said:
The bluetooth is properly connected. When I make a call and hit the green call button, it does go through the bluetooth device. It is only when answering a call it does not go through the bluetooth device when I hit the green call button. Yes, very strange. Oh well, I was hoping somebody might have some insight.
Jeff
Click to expand...
Click to collapse
What radio and Windows ROM are you using? I know that some of the different ones fixed some BT issues. When my headset is connected it always goes to my headset no matter what I push. Sometimes I have it in my pocket and forget and then can't hear anything on the phone. I believe you can force it to go to your headset after answering the call though.
jambrose said:
What radio and Windows ROM are you using? I know that some of the different ones fixed some BT issues. When my headset is connected it always goes to my headset no matter what I push. Sometimes I have it in my pocket and forget and then can't hear anything on the phone. I believe you can force it to go to your headset after answering the call though.
Click to expand...
Click to collapse
I am currently using DCD 3.2.6 with radio 3.37.75. To be honest I am not sure I have tried it with this combination. But, I have had the problem with a DCD rom, I just don't remember which radio.
My phone has always bypassed the bluetooth earpiece if I press the answer button on the phone and not the button on the earpiece. It did it from day one with the stock verizon rom and it still does it with my custom dcd rom.
I like the option of bypassing the earpiece to answer a call, especially in a crowd. Also I have the incoming calls announced thru the earpiece. This allows me to know who is calling without even looking at the phone or touching it to answer it thru the earpiece.
This is my insight on this. I hope this helps.
Are you using Voice Command? Is the sound very low?
tommvee said:
My phone has always bypassed the bluetooth earpiece if I press the answer button on the phone and not the button on the earpiece. It did it from day one with the stock verizon rom and it still does it with my custom dcd rom.
I like the option of bypassing the earpiece to answer a call, especially in a crowd. Also I have the incoming calls announced thru the earpiece. This allows me to know who is calling without even looking at the phone or touching it to answer it thru the earpiece.
This is my insight on this. I hope this helps.
Click to expand...
Click to collapse
jeffgman said:
If I have a bluetooth device connected to my XV-6800, is there a setting or something I can do that will allow me to answer the phone with the call button on the phone, but have it connect to the bluetooth device? Right now if I hit the call button, it only goes through the phones speaker as if the bluetooth device was not connected. For me to answer a call using the bluetooth device, I have to hit the button on the bluetooth device.
Thanks,
Jeff
Click to expand...
Click to collapse
Mine operates the same way. I don't beleive this is a "flaw", and may vary by type of bluetooth device being used. OP is looking for a way to override this setting / feature if anyone knows. Personally, I like the option of taking it on the phone for privacy reasons as my BT device is through the car speakers.
ande8150 said:
Mine operates the same way. I don't beleive this is a "flaw", and may vary by type of bluetooth device being used. OP is looking for a way to override this setting / feature if anyone knows. Personally, I like the option of taking it on the phone for privacy reasons as my BT device is through the car speakers.
Click to expand...
Click to collapse
I agree, I don't necessarily think it is a flaw. I would prefer to have mine answer with the bluetooth if I hit the green call button. I was just wondering if there is a setting some where that I am overlooking to have it the way I would prefer.
I just tried it again with the DCD 3.2.6 and 3.37.75 radio. As has been mentioned above, it does not appear to be related to a rom or radio, it is a feature of the phone.
A friend of mine has an iphone, and when they get a phone with a bluetooth earpiece enabled, they get options on the screen which say answer, answer on phone, or ignore. Or something along those lines. I like having those options, but understand if it is not available on the 6800.
Thanks for all of the replies.
Jeff

[Q] Jabra Extreme2 with Epic 4G causes phone to freeze

I have searched and searched and I am actually currently waiting two new Jabra Extreme2 headsets from Jabra.... but I don't have a lot of faith that the problem will be solved.
The scenario is simple.. Calling and listening to music is fine. The issue is on incoming calls, and only MOST of the time.
If the headset is on and connected (bluetooth) the ringtone will start to stutter and the announcement in the headset will be "call from " and a number instead of the actual name in the contact list. At this point the phone will be frozen. The call will roll to voicemail. The only way to shut the headphone up from repeating the number continuously is to turn it off. Once the headset is off, you can usually get to the pulldown and turn off bluetooth. It will take awhile (minute or two) to release, but it will. At this point you can turn on the headset and turn on bluetooth again and make a call without issue. Maybe even receive a call... but about 8 out of 10 calls will result in the above.
My wife and I each have an Epic 4g and a Jabra Extreme2 headset. The issue is the same on both phones. We have older Jabra BT530 headsets that other than sounding like crap. (old bluetooth tech) work great, no issues.
I'm not convinced the issue is the headset. I mean really, there is no "software" for the headset. It's just a bluetooth connection, so why is the phone freezing? I tried different ringtones as I thought that might be the issue, but it isn't.
Does anyone have any thoughts or insight, or any idea if it could actually be the headset causing the phone to freeze.
Also, does anyone know how to disable the PBAB as that seems to be related but without being able to disable it, I can't confirm.
Any help or insight would be greatly appreciated. Anyone using the Extreme2 ?
Well, I have a Moto Finiti Bluetooth and I am not having any of the issues you mentioned so far. Thankfully its connecting better than earlier ROM releases on my Epic
Sent from my SPH-D710 using xda premium

Categories

Resources