Related
yes, yes, yes, i know every newbie gets told to search. i tried but this seems like a heck of a site with tonnes of posts.
In short could anyone kindly point me to a post or answer the que:
How do i get my videos to play on actual FULLSCREEN and not postage stamp fullscreen.
is there an option or is it small because of the limited processing power?
Cheers
Mark
If u wanna play them with the default WM player then upgrade to the AKU 3.2 version ROM or else try TCPMP player it's free and good enough for all ur multimedia player needs.
Thanks bud. i tried a few vids on the wmp player first and luckily one of them actually played on the FULLSCREEN. the vid had a much larger data transfer rate.
So is there any way to modify the files i have so that they have the same arrangement as this particular file.
Anyone had the same problem
Cheers
Mark
I'd really recommend installing TCPMP. The standard media player is pretty crappy (just like Windows Media Player, I guess). TCPMP is free and plays all videos in Fullscreen if you want. If also supports a lot more codecs than the standard player.
WMP that comes with the phone will not show a video to be any larger than it actually is. If a video is 64x64 pixels then it will occupy that much on the screen. It will however crush a 640x480 video to fit your 320x240 screen.
TCPMP WILL stretch videos to fill your screen. Get that!!
There is no way to edit the file like you suggested without making the file size much greater needlessly.
If I use the camera video capture function, it always plays in reduced size, even using the new ubeaut 3.2 ROMs. These ROMs have not fixed the full size video issue for videos captured in 320x240 using mp4 format.
Unless, of course, somebody can tell me where to look and the settings. I have been using AKU3.2 for a while both versions, and they do not play the video capture in full screen mode at all.
Maybe if I use AVI formats rather than MP4 might be an idea I havent tried. MP4 is a much more compressed format.
hey thanks for the help - cheers
guys, i just needed the reassurance that it was ok. i just downloaded it and as u say its a great full screen player - thanks again.
simon_darley said:
Maybe if I use AVI formats rather than MP4 might be an idea I havent tried. MP4 is a much more compressed format.
Click to expand...
Click to collapse
U r right as avi will take much of ur memory so thats not practical to use.
Hi everyone.
I would like to share with you my experience with the touch HD and the settings I use for video playback.
I own both an iphone 3g and a HTC touch HD and set about looking for a piece of software that could encode video once and playback perfectly on both phones.
After many hours of trying various encoding programs I have finally found one that encodes perfectly for both devices and plays in the standard HTC media player. Best of all its free!!
The software I use is called Freestar ipod video converter and the settings I use are as follows..
Select the device as iphone and under advanced settings alter the video quality to 512. Its as simple as that!
I have encoded around 30 movies using various source code from DVD rips to divx/xvid and have had no problems at all. All the videos have played perfectly on both the iphone 3g and the HTC touch HD.
Hope this helps in some way.
Richard
Thanks for sharing. I'm interested in looking into this. I've tried super.. and can't figure out how to START the conversion (am I an idiot???) I've tried the purpose build HD encoder program I found on here and it doens't seem to make ANY different to my player. I'd be interested in checking this process out.
Regards,
BANE
The only problem I have is shutting down the software after it has finished converting, I am using Vista 32 bit and have to go through task manager to close the program.
Other than that small issue I find the software really easy to use. Simply click add and browse to the file you want to convert then click convert.
It averages around 13 to 15 minutes to convert a full length movie on my machine. Q6600,4GB ram,8800gtx.
Cheers.....Richard
Exciting! I too have yet to find the solution that works. I note that Freestar takes the VOB files as input rther than IFO files. Can I ask how you concatanate the converted files together to make one seamless movie when the various VOBs have been converted?
BANE said:
Thanks for sharing. I'm interested in looking into this. I've tried super.. and can't figure out how to START the conversion (am I an idiot???) I've tried the purpose build HD encoder program I found on here and it doens't seem to make ANY different to my player. I'd be interested in checking this process out.
Regards,
BANE
Click to expand...
Click to collapse
Drag your media file into the bottom section of Super, once there choose your settings for encode etc then make your the file in the bottom section is "ticked" and click encode - should work.. Think default output location is program files\super or summit like that..
I'm not joking... but I don't seem to have an ENCODE buttone. Out of curiosity, could you please tell me exactly where this button is on your program so i can make sure it's not staring me in the face??
Thanks
golightlygl said:
Exciting! I too have yet to find the solution that works. I note that Freestar takes the VOB files as input rther than IFO files. Can I ask how you concatanate the converted files together to make one seamless movie when the various VOBs have been converted?
Click to expand...
Click to collapse
I use a program called videoredoplus to concatenate mpg (and vob) files which streamcopies as oppposed to recodes. Concatenate before recoding (with anything) for the best quality results
BANE said:
I'm not joking... but I don't seem to have an ENCODE buttone. Out of curiosity, could you please tell me exactly where this button is on your program so i can make sure it's not staring me in the face??
Thanks
Click to expand...
Click to collapse
This is what my screen looks like.. Bottom left is the encode button..
DVDCatalyst is the bomb!
Look no further than this program for video encoding.
http://pocketdvd.ca/products/dvd catalyst 3.html
It even has a device profile for the HD and it works perfectly. I use it on a Vista 64 Ultimate system and have had no problems. They offer a 7 day full feature trial download. My 8 core Xeon system can do a 1:45 movie in 17 minutes in HQ mode!
Very impressive and easy to use UI. Three things needed to configure it is to tell it that you have a Touch HD (HQ mode preferred), where to put the file (unless you want the default location) and press "GO". It's that easy. $19.95 USD is a bargain.
Regards,
Gordo
^^ its a **** program.
I used a trial to convert a HD film to that 800x480 and just picked the profile HTC HD (HQ) and the film is unwatchable.
Got a benchmark of 54%.
In the end, i guess it doesn't come down to the program but the device.
This is getting ridiculous!
Psygnosis84 said:
^^ its a **** program.
Click to expand...
Click to collapse
A little harsh but I tend to agree with this sentiment after doing a couple of flics.. perhaps it's virtues lie somewhere yet to be discovered.
I use the ipod me video converter in the maximum resolution and in the options - slow, quality and the videos in the touch HD play perfect.
And it also allows to use subtitles (srt) (The encoder in this forum also works but it doesn't allow subtitles and sometimes I have sound issues...)
Psygnosis84 said:
^^ its a **** program.
I used a trial to convert a HD film to that 800x480 and just picked the profile HTC HD (HQ) and the film is unwatchable.
Got a benchmark of 54%.
In the end, i guess it doesn't come down to the program but the device.
This is getting ridiculous!
Click to expand...
Click to collapse
Strange, I have burned several movies and just selected the HD (HQ) profile and changed nothing else (defaults for everything except for conversion priortiy, I set that to Very High, as I have an 8 core Xeon with 32GB of RAM and therefore get 17-18 minute conversions) and it views perfectly. What player are you using? I am using the standard, built in Windows Media Player and get superb results.
Try it again with WMP and let me know what results you get.
Gordo
what do you mean with HTC built in media player? The windows mobile media player? That's one of the worst players in my opinion.
jetjockgordo said:
Look no further than this program for video encoding.
http://pocketdvd.ca/products/dvd catalyst 3.html
It even has a device profile for the HD and it works perfectly. I use it on a Vista 64 Ultimate system and have had no problems. They offer a 7 day full feature trial download. My 8 core Xeon system can do a 1:45 movie in 17 minutes in HQ mode!
Very impressive and easy to use UI. Three things needed to configure it is to tell it that you have a Touch HD (HQ mode preferred), where to put the file (unless you want the default location) and press "GO". It's that easy. $19.95 USD is a bargain.
Regards,
Gordo
Click to expand...
Click to collapse
I have to say that I'm watching a full length vid now on my HTC Touch HD having used DVD Catalyst 3 on trial and it is perfect in both WMP and Album player (I don't really see any difference.)
I've not had any sucess previously with Super Converter no matter what setting I tried, yet with this, as Gordo said, just set it running with the default settings for the HTC and it converted seamlessly.
Most impressed and I think I shall be buying this one after the trial.
Trixter: Thank you very much for the screen shot. I can confirm that those buttons do NOT show up in the build I have :S (can't recall which build it is offhand) Weird.
And is it just me or is it really difficult to find this for download? I go to their site download page, but end up navigating in circles :S
BANE
hurzwa said:
what do you mean with HTC built in media player? The windows mobile media player? That's one of the worst players in my opinion.
Click to expand...
Click to collapse
I beg to differ. While the UI sucks somewhat, I found WMP to sound better than Coreplayer (after tweaking it for hours!) and Pocketplayer. This is true with both my Shure SE530's and my Moto S9-HD's.
Here is a link to a video I shot with my son's Flip video camera so the quality is not perfect. I could not get close enough and keep the Touch HD in focus and let you see how clean the movie is. As I said in my earlier posts, DVDCatalyst and WMP work together perfectly.
Right click this link and do a "save as".
http://www.jetjocktech.com/gordo/Posted Pics/VID00006.AVI
http://www.jetjocktech.com/gordo/Posted Pics/VID00004.AVI
Gordo
...at last!
Fabulous! Having tried many of the solutions available, this is the first one that takes a real DVD (as opposed to a video file) and extracts and encodes the file to a size that allows playback on the Touch HD without stuttering.
Belive me, I've tried many solutions but this is not only effective, it's incredibly easy to use!
I recommend everyone to give it a try. I shall be paying. I've spent more time and money trying to get video to work on the Touch HD that the price seems lke a brgain now even though it might not have done when I started the process.
ok, update. Thankfully now SUPER encoder WORKS. IE the ENCODE NOW button and the rest of the buttons at the bottom have appeared.
I'm running a Vaio UX280P as my main computer, and whether it's to do with changing my poser setting from MAXIMUM BATTERY to Desktop use, or the fact that my resolution is higher when I plug it into an external monitor, It's worked.
I encoded a movie today and it not only works a treat, it did it in a pretty decent amount of time. My past experience with encoding stuff took HOURS!
Anywa, seems like a great program now i've had the chance to use it.
BANE
free video/music mp4 for htc hd full screen!!
try this site http://keepvid.com/
go to exsample ,youtube kopie the link to keepvideo its will convert to mp4 and you can play direct on your phone.
I have tried several trials on video converters and no matter what I do I get great picture but the voice is way behind.
How do I get the voice to catch up with the film. ( sorry I know it is not techy language)
I use MediaCoder to transcode video. It's free.
http://mediacoder.sourceforge.net/
The even got the iPod Edition which u can use for simplicity reason.
Thank you, can you tell me what settings you have used on that programme.
Core player, THE best media player you can get imo.
Will even play .mkv!!!
mightycaz said:
Core player, THE best media player you can get imo.
Will even play .mkv!!!
Click to expand...
Click to collapse
He is talking about encoding the movie.
You can try Windows Media Encoder (from Microsoft).
It's also free, and does a good job on encoding movies.
hi guys,
i seem to be having the same problem with the whole audio and video out of sync. i have tried a range of format eg. wmv, mp4, 3gp etc but all are about half a second out of sync. i have even tried core player and tmpcp but with no luck. did anybody else have this problem and manage to fix it? any help will be much appreciated
Hello,
I use the HTC Touch HD Video Converter which is very good. He is especially for WVGA 800 x 480 screens, and the quality of the movie is very good.
HTC Touch HD Video Converter v1.21
DVDFab6
I have not (yet) seen the problem with the sound you describe here.
I use DVDFab6 since a while, originally to convert videos to my iPod, but now also to my HD2.
I have a Touch Diamond too, but the screen is a bit too small to watch for longer time and it drains the batteries also very fast. I haven't tried yet fully, but my first tests show me I can do 3-4 hrs of video on one battery and still have enough power left to use it as a phone. Which is very useful if you have to do a lot of short flights.
I use the PS3 settings in DVDFab6 and adjust the display to 800x444 size, depending on the original size. I found that I can not play them directly from Mediaplayer, but if I click on them in the FileExplorer they start playing without any problem.
BTW, also the iPod m4v files play nicely without delays on the HD2
Yeah i have the same problem, the video/audio file is perfect on my pc but about half a second out of each other on my HD2. You can adjust the audio/video sync in core player but it shouldn't be happening in the first place.
hi guys, thanks for your help. i called htc tech support but all they were able to say was perform a hard reset, which sadly didnt fix the problem! even mp4 videos downloaded straight from the net have the same problem. such a shame because apart from that its an amazing phone. will keep trying and post up if i have any luck
I just tried the one that Braakie suggested and although it converted my 700Mb AVI film to a 500Mb MPEG 4 film, when i tried to copy it to my SD card on my HD2 it said the MPEG 4 format wasn't supported. Can someone enlighten me as to what formats are supported and/or what movie player they use.
I'm having the same audio sync issues as others here. I'm encoding using handbrake and when I play it back on the PC it is perfectly in sync. However when I play it back on the HD2 using the HTC video player the audio lags slightly but noticeably behind the video. When I copy it to my wife's Touch HD it plays fine, so it seems to be a problem with the HD2 software.
I'm running the stock Vodafone 1.43 ROM with all hotfixes applied. Will a ROM update fix this? Anyone else with this ROM having/not having this problem?
I'd be very grateful for any input.
Chaps,
Somewhere on XDA is Chainfire's video driver update (or a reference to it) which you should find and install to help overcome the lip synch issue.
If you can't find it using Search...http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all then go onto the Modaco site and its there somewhere under the Toshiba TG01 device.
Good hunting.
WB
Thanks for your help - I've found the driver here:
http://forum.xda-developers.com/showthread.php?t=592663
However, as far as I can see that's a 3D OpenGL driver and not something that I would expect to affect video/audio synchronisation. Unless, of course, you had the same problem and this fixed it for you? I don't really want to mess about with video drivers unless I'm sure it will fix it.
I was a little dubious and cautious myself but installing the driver did seem to make a difference, sufficient for me not to notice it as much.
Installation is a personal choice. You might want to make a full backup of your device using, say, SPB Backup, before you install. That way you can do hard reset and restore if you don't like the driver.
All the best,
WB
I have the same problem with youtube vids too, just had a replacement hd2, but it's just the same, skyfire, coreplayer, youtube you name it, audio lags the video...
Real pain in the butt for a device who's main feature is a huge screen...!!!
wacky.banana said:
I was a little dubious and cautious myself but installing the driver did seem to make a difference, sufficient for me not to notice it as much.
Installation is a personal choice. You might want to make a full backup of your device using, say, SPB Backup, before you install. That way you can do hard reset and restore if you don't like the driver.
All the best,
WB
Click to expand...
Click to collapse
Well I installed the 3D driver, which was easy enough, but unfortunately it made no difference at all to the video/audio sync in either of the two driver modes so I uninstalled it again. (No need for a hard reset, thankfully). I'm using the video in this thread to test since you can easily tell whether it's properly in sync or not.
http://forum.xda-developers.com/showthread.php?t=612935
Oh well, it was worth a try - thanks for the suggestion.
hi. thinking of moving from the compact iv to hd2! question: how easy is it watch movies on the go with hd2? how big sd card would it need,,, and what format is the best to convert dvd's or tv program recordings? ta!
(the screen is so huge,,, looks like next gen iphone will be copying htc!)
jannen said:
hi. thinking of moving from the compact iv to hd2! question: how easy is it watch movies on the go with hd2? how big sd card would it need,,, and what format is the best to convert dvd's or tv program recordings? ta!
(the screen is so huge,,, looks like next gen iphone will be copying htc!)
Click to expand...
Click to collapse
If you rip dvds with something like Nero, you can create DivX avi files that will play a treat in core player.
The native Windows WMP format plays perfectly in media player too.
The native HTC player format is mp4, and to be honest, that looks the best to me, but DivX in core player is about 99% as good.
Whenever I have something to watch, it's usually a DivX file, so I just copy it to the phone and watch it as is, without conversion (about 350MB per hour). I have a 16GB card with about 6GB of music, 2GB of installers and installed apps, and therefore 8GB free to put vids on (at the moment).
I should be able to get about 10 films on there, or 20 typical episodes of TV programs, at the above-stated average size.
A few people have had problems with core player, but there's plenty of settings that you can change. I've got it set to play nicely now, and there's very rarely any lag (toggling fullscreen off and then back on gets rid of that for me), and it looks gorgeous on the massive bright screen.
I am using HTC Touch HD video converter (use search in the forums for download ). It works fine to convert for example divx movies.
robje_2004 said:
I am using HTC Touch HD video converter (use search in the forums for download ). It works fine to convert for example divx movies.
Click to expand...
Click to collapse
I find this to be putting the audio out of sync very slightly when converting xvids etc.
richardirv said:
I find this to be putting the audio out of sync very slightly when converting xvids etc.
Click to expand...
Click to collapse
Yes me too. I converted several TV shows and the audio remained out of sync by about 0.25 seconds for the duration.
If you can get Core Player or TCPMP (core player beta) working well (which just takes some settings fondling), then you don't need to convert things. AVIs and MPEGs play perfectly for me.
johncmolyneux said:
If you can get Core Player or TCPMP (core player beta) working well (which just takes some settings fondling), then you don't need to convert things. AVIs and MPEGs play perfectly for me.
Click to expand...
Click to collapse
I know what you mean but I kinda like using the HTC Player, it just feels like a better experience.
richardirv said:
I know what you mean but I kinda like using the HTC Player, it just feels like a better experience.
Click to expand...
Click to collapse
Yeah, I know what you mean too! In fairness, the hi-def movie test thread with the helicopters movie on it looks sooooooooo much sharper and cleaner in the HTC player than it does in CorePlayer.
I'm just impatient. I just "rip" a movie or tv show and watch it straight off. I find converters to usually take as long as it takes to watch it.
johncmolyneux said:
Yeah, I know what you mean too! In fairness, the hi-def movie test thread with the helicopters movie on it looks sooooooooo much sharper and cleaner in the HTC player than it does in CorePlayer.
I'm just impatient. I just "rip" a movie or tv show and watch it straight off. I find converters to usually take as long as it takes to watch it.
Click to expand...
Click to collapse
Hehe, When I get time I am going to dowload a variety of converters and try to find one I like and one that works well. Ideally the one that was made for the HD would be perfect if the audio sync was fixed. I must admit though I havn't had chance to actively look for any solutions to that problem yet.
One thing I would like from the HTC Player would be a resume option.
Settings in Core Player
Everyone is talking about these Settings in Core Player:
I have searched the web and couldn´t find any good settings.
Can someone please share the settings for Core Player here ?
Thanks in advanvce.
raphy82 said:
Everyone is talking about these Settings in Core Player:
I have searched the web and couldn´t find any good settings.
Can someone please share the settings for Core Player here ?
Thanks in advanvce.
Click to expand...
Click to collapse
In CorePlayer, go to Menu, Tools, Settings, Select Page, Video and set output to Raw FrameBuffer or GDI, and make sure quality is High. I also set Smooth Zoom on (not sure what it is though), and turn Dither off (I've had it hang on me when this was on).
I have mine on Raw, and it plays movies that are SD (telly size) perfectly. I can watch them on my TV via my PC, or just copy the AVI onto my memory card and watch them on the phone.
Thank You , I´ll try the new settings when i get home.
Thanks
Thanks for all the posts... damn this forum is so good!!!
Just one thing... is there a way to watch videos in landscape on Coreplayer? The version I have doesnt have that option...
jannen said:
Thanks for all the posts... damn this forum is so good!!!
Just one thing... is there a way to watch videos in landscape on Coreplayer? The version I have doesnt have that option...
Click to expand...
Click to collapse
What version are you using? That's been in every version of coreplayer I've had.
I've just done a hard reset on my phone, and haven't installed coreplayer yet, so I can't tell you how to do it exactly, but the it's in menu under options and I believe it's orientation. Also, when a movie is playing it, touching it usually makes it landscape and fullscreen too.
johncmolyneux said:
In CorePlayer, go to Menu, Tools, Settings, Select Page, Video and set output to Raw FrameBuffer or GDI, and make sure quality is High. I also set Smooth Zoom on (not sure what it is though), and turn Dither off (I've had it hang on me when this was on).
I have mine on Raw, and it plays movies that are SD (telly size) perfectly. I can watch them on my TV via my PC, or just copy the AVI onto my memory card and watch them on the phone.
Click to expand...
Click to collapse
Excellent, using GDI seems to have sorted out my frame flicker during fast moving sequences. Thanks!
So I want some videos on my X10. I used ones I already had on my PC (MP4's) and put them on my phone. The quality is fine, some need to be made bigger as they have black areas on the sides. The problem is, there is lag. I'm talking about a second behing on music videos etc. I have tried about 4 conversion softwares now and they all produce the same results, some better than others however. Does anyone know what I'm doing wrong?
I have used Mobiola to convert my videos and they paly well on the X10.
You need to create a special profile for screen resolution and save it.
you just need to double tap the screen to full size the video and get rid of those black borders
Forget the conversion apps and just get the divx app.. Works fine without the hassle of converting!!
Hope it helps!!
-------------------------------------
Sent via the XDA Tapatalk App
Simr, I have the exact same problem and I can't seem to fix it regardless of what conversion program I use. I've read on other forums that other phones using the snapdragon proc are having the same prob. What's weird is that not everyone seems to be having the same issue. My temp fix has been to use the Rock divx player. Divx stuff plays in sync so I convert other formats to divx. Hopefully a firmware update will fix this.
-------------------------------------
Sent via the XDA Tapatalk App
Have you tried Super? I did not experience any lags on mine.
My profile on Super
MP4
H.246/AVC
854x480
30FPS
1584kbps video bitrate
44100K audio
2 channels
128kbps audio bitrate
dpk0875 said:
you just need to double tap the screen to full size the video and get rid of those black borders
Click to expand...
Click to collapse
on the stock video player? how?
Guys, i have an early beta version of player, which plays .avi, .mkv and other popular formats without any conversion, just uploaded 1.4gb avi movie from my pc, and it plays flawless, ~25fps. Does someone want to try it out ?
raundown said:
on the stock video player? how?
Click to expand...
Click to collapse
umm, when the file is playing, i just tap the screen twice - like how you would double click the mouse on your computer to open stuff
i was also going to suggest that maybe your video files are originally laggy before you put them on your x10 but according to adamupnorth, it sounds like a different issue, very strange...
simr! said:
So I want some videos on my X10. I used ones I already had on my PC (MP4's) and put them on my phone. The quality is fine, some need to be made bigger as they have black areas on the sides. The problem is, there is lag. I'm talking about a second behing on music videos etc. I have tried about 4 conversion softwares now and they all produce the same results, some better than others however. Does anyone know what I'm doing wrong?
Click to expand...
Click to collapse
this is because android 1.6 does not support hardware acceleration in the x10 ,2.1 will bring better video playback ,it will be 720p playback