fellows,does anyone know how to turn on the evo's SOFT KEYS BACKLIGHT ON on Cyanogenmod 6 stable rom?mine is always off..please
Sent from ANDROIKAY ON CM6 from xda app =]
LEDs Hack...in the market
They come on when its dark.
Since were talking about it is there a program that'll keep the soft key leds OFF? The light leakage is ridiculous.
All spelling errors thanks to xt9 on my Evo!
LEDs Hack is a great app for turning them off. I don't think it can force them on if they're not already set to be on.
Sent from my Baked EVO via the XDA app.
onewaycourt said:
LEDs Hack is a great app for turning them off. I don't think it can force them on if they're not already set to be on.
Sent from my Baked EVO via the XDA app.
Click to expand...
Click to collapse
Thank you. I'm so glad to have the **** off.
All spelling errors thanks to xt9 on my Evo!
I have the same issue right after i installed Cyanogen 7. Soft keys don't light anymore. Can anyone help?
pauln62 said:
I have the same issue right after i installed Cyanogen 7. Soft keys don't light anymore. Can anyone help?
Click to expand...
Click to collapse
go to setting, then select display then turn off automatic brightness..should work..otherwise they will turn on themselves when its dark.
CYANIZeD eVO!
Thanks. That worked.
Actually, you don't have to turn off auto brightness. Go to Settings -> CM settings -> Display -> Auto backlight. Check "Use custom" under light levels. Then go to Edit other levels and set all the values for "Buttons" to 255. Be sure to click "Save & apply" at the top. This should result in the button lights turning on regardless of ambient light. Of course, you can also tweak it however you want here.
Related
My backlight is always set to min. level after wakeup, i have to start up the camera application to get backlight running everything. Have tried to change the settings from backlight but it reverts back after switching off the screen. anyone have the same problem
Derrick said:
My backlight is always set to min. level after wakeup, i have to start up the camera application to get backlight running everything. Have tried to change the settings from backlight but it reverts back after switching off the screen. anyone have the same problem
Click to expand...
Click to collapse
Happens to me after a soft reset, then sleep. The wakeup has the backlight switched off.
My work around is to go into backlight settings immediately after a soft reset, change to a different level, then change back to the required one. After that it will wake up with the correct setting. Bit of a faff I know but thats M$ for you!
Derrick said:
My backlight is always set to min. level after wakeup, i have to start up the camera application to get backlight running everything. Have tried to change the settings from backlight but it reverts back after switching off the screen. anyone have the same problem
Click to expand...
Click to collapse
Here is one solution:
http://www.iaccarino.de/silvio/ppcstuff.htm
Scroll down to the backlight timeout fix.
Or use a registry editor and set the value
LockLevel
beyond the key
HKEY_CURRENT_USER\ControlPanel\BackLight\LockLevel
back to zero.
Or if you use phoneAlarm you may also use the newest version of my NetManager
http://www.pocketmax.net/smf/index.php?topic=2650.0
the timeout bugfix is included in this release.
regards,
Silvio
siaccarino said:
Or use a registry editor and set the value
LockLevel
beyond the key
HKEY_CURRENT_USER\ControlPanel\BackLight\LockLevel
back to zero.
Click to expand...
Click to collapse
Thank you thank you thank you!!!!!!!!
This bug just started happening to me and I KNEW it was related to the phone lock (because it didn't start until I was playing around with the lock settings) but couldn't figure out how to fix it.
Whew... that was driving me absolutely nuts.
just had my sp5 last month, and this bug really pisses me off! good thing i found this solution!
GldRush98 said:
Thank you thank you thank you!!!!!!!!
This bug just started happening to me and I KNEW it was related to the phone lock (because it didn't start until I was playing around with the lock settings) but couldn't figure out how to fix it.
Whew... that was driving me absolutely nuts.
Click to expand...
Click to collapse
Me too. Thanks Guys
HTC Cruise backlight
Hey
i had the same problem (i guess) in addition to that the level of backlight used to decrease to the basic level after hanging up a call. However when i re-adjusted it, the level indicator is exactly where i left it! and once i touch it (not move it) it "remembers" the current level! but still darkens after hanging up calls or coming up from a sleep period.
the solution was :
after a soft reset, adjust the level you want then immediately lock your device and let it turn off the screen by itself. when it wakes up everything will be stable.
I have just performed a hard reset, and installed the latest ROM from O2. I did the basic install option.
The keylight does not work, and never has worked.... I have enabled the keylight in the settings menu, the option "enable keyborad backlight sensor".
Still no light.... do I have to turn on som other menu option or change something in the registry? Or is it just a software error? Everything else works just fine on the device.
It is just a minor fault, but I want that cool blue keyboard backlight....
It does have to be uber-dark for it to activate. Have you tried putting your finger over the sensor whilst pressing a key?
Failing that, take it back
where is the light sensor as my exec keyboard light apears not to work either and it was only deliivered yesterday!
GaZ said:
It does have to be uber-dark for it to activate. Have you tried putting your finger over the sensor whilst pressing a key?
Failing that, take it back
Click to expand...
Click to collapse
Yep, it worked, but only when it is dark as the grave.
The button to switch it on, does not! But I'll manage, as it turns itself on when any key is pressed.
Is there any registry tweak I can do to make that sensor work even if it is not pitch black?
coolhand said:
GaZ said:
It does have to be uber-dark for it to activate. Have you tried putting your finger over the sensor whilst pressing a key?
Failing that, take it back
Click to expand...
Click to collapse
Yep, it worked, but only when it is dark as the grave.
The button to switch it on, does not! But I'll manage, as it turns itself on when any key is pressed.
Is there any registry tweak I can do to make that sensor work even if it is not pitch black?
Click to expand...
Click to collapse
Enable backlight button in HTC Universal
This trick permit you to enable the backlight button in HTC Universal devices (Qtek 9000, I-mate JasJar, XDA Exec, Dopod 900…).
http://www.pocketpceurope.eu/downloads/Backlight_key.rar
Without installing anything, if you disable the sensor in buttons settings, the keyboard will always light up when you press any key in any light condition.
coolhand said:
GaZ said:
It does have to be uber-dark for it to activate. Have you tried putting your finger over the sensor whilst pressing a key?
Failing that, take it back
Click to expand...
Click to collapse
Yep, it worked, but only when it is dark as the grave.
The button to switch it on, does not! But I'll manage, as it turns itself on when any key is pressed.
Is there any registry tweak I can do to make that sensor work even if it is not pitch black?
Click to expand...
Click to collapse
The light button on the device is just for the backlight for the screen, not the keyboard
gadgetman said:
where is the light sensor as my exec keyboard light apears not to work either and it was only deliivered yesterday!
Click to expand...
Click to collapse
Top left of the keyboard, above the green answer button
Currently the keyboard light on my dopod 838 pro turns on when low light is detected automatically.
How would i over ride that so i can turn it on at my request??
P.
You can either turns on by automatically or you can turn off that feature. If you turn it off, then the keyboard will light whenever you slide the phone. There might be registry fix. Not sure.
feature? Is there a feature were everytime i open the slide the light turns on? wahh
chingy213 said:
feature? Is there a feature were everytime i open the slide the light turns on? wahh
Click to expand...
Click to collapse
To have baclight come on everytime you open keyboard
Start>Settings>buttons>Backlight and uncheck Enable backlight sensor.
Mike
that answers my questions
thanks
mikechannon said:
To have baclight come on everytime you open keyboard
Start>Settings>buttons>Backlight and uncheck Enable backlight sensor.
Mike
Click to expand...
Click to collapse
searched the forum and found my answer, ty again mike.
1)
I think HTC have forget to do it possible to turn off the vibrator on the Home, Menu. Back and Search buttons at the bottom, when the make the HTC Wildfire.
So are there somebody who know if it possible to disable the vibrator in some kind of way, for this buttons?
2)
When the battery is under 15%, the battery indicator flashes continuously.
Is it possible to turn that off?
rxxt said:
1)
I think HTC have forget to do it possible to turn off the vibrator on the Home, Menu. Back and Search buttons at the bottom, when the make the HTC Wildfire.
So are there somebody who know if it possible to disable the vibrator in some kind of way, for this buttons?
Click to expand...
Click to collapse
Go to settings>Sound & Display and disable Haptic feedback.
rxxt said:
2)
When the battery is under 15%, the battery indicator flashes continuously.
Is it possible to turn that off?
Click to expand...
Click to collapse
It's not possible to turn the Flashing LED off using any off the setting. Rooted? that's another story.
Skye Menjou said:
Go to settings>Sound & Display and disable Haptic feedback.
Click to expand...
Click to collapse
Oooh, very nice! Thank you man, this is what I've dreamed about since I got my Wildfire, to disable that!
Do you also know if it possible to disable vibrator, in the 'Phone' when I enter a number?
cashisback said:
It's not possible to turn the Flashing LED off using any off the setting. Rooted? that's another story.
Click to expand...
Click to collapse
But "Soft Root" is not enough? So I must wait a little longer..
rxxt said:
Oooh, very nice! Thank you man, this is what I've dreamed about since I got my Wildfire, to disable that!
Do you also know if it possible to disable vibrator, in the 'Phone' when I enter a number?
But "Soft Root" is not enough? So I must wait a little longer..
Click to expand...
Click to collapse
1) I don't think you can disable the vibrator in the 'phone', only the audible tone.
2) Yea we must wait till a ''Hard Root'' (which will be soon)
I got both settings at menu - screen and sound
Sent from my HTC Wildfire using XDA App
Can't disable Haptic feedback
It is not highlighted and can't be ticked, are there any other ways?
I can't find the options in the menu and the search is useless. Abby way to keep them from turning on?
Galaxy Button Lights in the play store.
The "feature" to turn them off was started with s6 and note 5 if I'm not mistaken. I know I had to use the app on my old at&t note 5 as well.
rawdikrik said:
I can't find the options in the menu and the search is useless. Abby way to keep them from turning on?
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.notquiteinsane.galaxybuttonlights
What I use. Best option.
Sent from my SM-G935V using Tapatalk
It's in the display settings.
natefish said:
It's in the display settings.
Click to expand...
Click to collapse
Not on all phones. Weirdly enough my first had it but my second didn't.
It's weird but my S7E doesn't have the 'touch key light duration' option
Onyok said:
It's weird but my S7E doesn't have the 'touch key light duration' option
Click to expand...
Click to collapse
mine doesnt either, and this has been driving me crazy at night time
Power save?
When I have power save on they don't light up.
New to the phone so don't know any aps that do it.
xcha0tic said:
Power save?
When I have power save on they don't light up.
New to the phone so don't know any aps that do it.
Click to expand...
Click to collapse
But once Power save mode is active, the status bar isn't transparent...