Related
Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael
miriedl said:
Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael
Click to expand...
Click to collapse
Update UPSL v0.1 by Pof
Link here :
http://forum.xda-developers.com/showthread.php?t=311403
And try again..!
Cheers...!
Hmmmm.
What do you mean with:
Update UPSL v0.1 by Pof
Michael
Pof is a user
UPSL is an unlocker utility so you can flash alternative ROM's
check the link - very informative.
reflashing your phone usually takes a weeks worth of reading if you care for your device.
And read it :
http://forum.xda-developers.com/showthread.php?t=312052
maybe it help you..!
Is there an easier way to explain this - Sorry i'm quite good working with my PC, but this was a bit greek:
All you need to do is:
1. Remove your SD card
2. Do a hard reset or clean storage (some programs like battery status block full access to your device)
3. Connect your mobile to PC and make sure that activsync connection is established
4. Start to flash your device with USPL, when DOS part end and your mobile switch to bootloader mode vista will find new device and start instaling new drivers.
5. Wait till vista finish installing new drivers and unplug your device, do a soft reset
6. Next step is to change vista drivers to xp, to do this you need to fallow this instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemi d=27
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
8. When USPL instalation will finish you can flash any rom you want to your arte
Succesfully tested on my T-Mobile MDA UK now I've got WM6 WWE.
Thanks pof for your great release
That explination is about as clear as it gets in 'phone talk'.
Perhaps elaborate a bit on what is exactly, or what step is, throwing you off.
Windows XP
Hi again.
Would i solve the problem if i just installed it from an Windows XP machine at work?
One final thing - Do you know if the GPS will still be working afterwards.
Have a good night from Oslo - Norway
Kind regards
Michael
Anybody install Helmi's ROM from Windows Vista?
I have trouble/ When i start bootloder on my BA, PC don't connect to mobile device
And i can't install ROM
I try install activesync, but that is impossible
You can't use RUU on vista with the built in drivers unfortunately.
There is a thread (search for it) and you will find out how to get it working.
Hey guys there is a WIKI!
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
I spend so many hours and nobody follow the wiki
But I am gonna to finish it cause I like the wizard style
Thanks anybody
I complete this task
For any body who need's:
how to upgrade ROM from VISTA
http://forum.xda-developers.com/showthread.php?t=291723
Upgrade is done with the old activesync drivers ... thats why i hate vista, you have to do a lot of stuff to reach your goal
I conferm that the rom upgrade never worked on my pc with Vista. I was forced to use my laptop with Xp. I think someone should make blueangel update utilities compatible with Vista too
Or just keep an XP virtual machine in a safe place
i will post the steps for vista upgrade later, because i am lil busy
xplode?
Have you read the wiki already?) There is nice step by step tutorial - however if you can make some pictures It would be much better!
Follow the instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=291723&highlight=vista
I upgrade my ROMS in Vista using this method and it works every time.
i will made guide with pichtures but it will be after 5-6 hours , because i only have time at night
WM6 with vista
kerio said:
Hey guys there is a WIKI!
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
I spend so many hours and nobody follow the wiki
But I am gonna to finish it cause I like the wizard style
Click to expand...
Click to collapse
Kerio, your wiki is very good, but my device only be in bootloader mode, and, although the vista recognize my device, the program that i'm using do not run the instaler. It be only in the first screen and do not able to get informations about my device.
My device is only with serial and v 2.08 in the screen!!!!
Thanks,
David Neto
davidc.neto said:
Kerio, your wiki is very good, but my device only be in bootloader mode, and, although the vista recognize my device, the program that i'm using do not run the instaler. It be only in the first screen and do not able to get informations about my device.
My device is only with serial and v 2.08 in the screen!!!!
Thanks,
David Neto
Click to expand...
Click to collapse
Try to remove SD from your device b4 do the flashing.
Thats right SD card should be removed before flash (device may not go into "USB" mode when "cradled")
However I have made PICTURES and added them to the wiki (they are quite big and it doesnt look very well) but will improve it later
ahttp://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista_Pic
Hi ppl. I'm new in the world of Win. mobile and Smartphones.I have an Xperia ( simlockfree logofree ) in dutch.
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707
ROM versie: 1.02.937.3
ROM Datum: 08/29/08
Radioversie: 1.06.25.29
Protocolversie: 52.43.25.24U
Uitbeidingversie: 1.0.55513.1119
Modelnr: X1i
R1AA017 R8A 1215-3311 GENERIC_NL
The phone seems to have some problems. ( restarts sometimes , loong loading time , frizing...etc ). I got back to the dealer and ask for warranty. He sed that the problem is for shure software and i can make an update SEUS. I tried for 3 days to do it and i can't. I have Vista Ultimate 64-bit SP1. The new and fresh Win mobile device center 6.1, working USB ports , different USB cables.I have no firewall.My phone connects without any problems and makes syncronization with sync center. The problem is in bootloader mode. I hear a connection sound , but the SEUS and the sync center doesn't see it. In system/device manager i see it as - mobile usb sync device ( or something like that ).The phone shows 3 colors and serial message . When i put the usb cable in , it changes to usb message. Doesn't do anything else. I tryed with/without SD card , restart , reinstall , reset , change ports , cables , drivers, win updates......all the advice in the forums except changing PC ( i have only 1).......Nothing.
I wanted to see if it's broken or not. I don't want to try hardspl flashing or anything else until i'm 100% shure that the phone is good. I don't want to give the f$%^&rs any reason to deny the warranty. So my question is : is there a solution to be able to connect to the SEUS in bootmode screen?
PS -- if it works i'll go for an different ROM-- i'm not dutch , and neither english , so pls excuse all the errors in this post.
Ty for taking the time to read this post.
Of curse thar iz. Iz da nurmall way! Use tha search-funkjon! Ya hav ta use tha natif Administrator-Account uf Win Vistaz!
karakay said:
I have Vista Ultimate 64-bit SP1.
Click to expand...
Click to collapse
Thats the Problem. I've got the same Problem with Vista (regardless if 32/64 bit).
This problem occures very often. Try it with Windows XP !
fdmedia said:
Thats the Problem. I've got the same Problem with Vista (regardless if 32/64 bit).
This problem occures very often. Try it with Windows XP !
Click to expand...
Click to collapse
TRY IT WITH ADMINISTRATOR ACCOUNT! Are you guys nuts?
I have the same problem. I've got only 1 account and it has status of administrator. I have run SEUS with admin privilages and no effect ;/
Abuk007 said:
I have the same problem. I've got only 1 account and it has status of administrator. I have run SEUS with admin privilages and no effect ;/
Click to expand...
Click to collapse
This is NOT TRUE ADMIN! Why don't you check this out and solve your problem: http://www.computerperformance.co.uk/vista/vista_administrator_activate.htm
Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland
Abuk007 said:
Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland
Click to expand...
Click to collapse
Yeah it's strange, so far SEUS is the only use for it lol.
Abuk007 said:
Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland
Click to expand...
Click to collapse
My account is admin but I can't still to see X1 goes further after connect mini-USB cable into X1. Any help?
I have admin account . The super-admin account . I did that already...forgot to mention it. Any other solutions?
karakay said:
I have admin account . The super-admin account . I did that already...forgot to mention it. Any other solutions?
Click to expand...
Click to collapse
Perhaps it is a 64-Bit issue. I can tell you from my experiments that under Win Vista 32-Bit it is most likely a problem of the USB driver. At least I don't think it's a software issue (By software I mean an application). If you run Windows XP on VirtualPC with USB "Passthrough", SEUS will not work either. So it must be a low-level problem of Vista. As you may know, Vista has a new driver system. I believe the 64-Bit version differs from the 32-Bit version in function.
Last week I checked SEUS with my Xperia and detected it correctly. But yesterday SEUS didn't recognize my X1. I didn't make any changes on my X1 since last week. I used Hard SPL to remove my custom Vodafone ROM 3 months ago, and I update to the official R2 without problems. I have the same problem that all of people who posted here. We need a solution because it's very strange this. Maybe SE made some change in his SEUS to avoid people who used Hard SPL update by the official way? Thank you very much. Best regards
VISTA is the problem......... With the help of an XP PC i used SEUS with no problems. Anyway....i steel have Vista PC , so if there will be an solution for future updates pls post them here. TY
i don't have Vista, XP but same problem...
Persuader X, does it say to you "loading...no image file"?
Sapa13 said:
Persuader X, does it say to you "loading...no image file"?
Click to expand...
Click to collapse
Yes. When I connect it, the color bars disappear and start the progress bar that appears when a ROM is being installed. After a pair of seconds, Xperia reboot and says "no image file "., and comes to the boot screen with color bars again to rest in that state forever.
Let me quote myself
I heard of some people that SEUS ran on Vista when they removed the tick for the USB-connection in the mobile device center. Maybe that helps.
Other said, that they had to install the new driver for the USB-sync-connection; just let Windows Update run while your X1 is in the bootloader-mode connected with your PC - maybe try this more then once; my Windows Update needed four runs to find the driver
Click to expand...
Click to collapse
One of the two points will help you too, you'll see
Hey guys, I can update finally. Try this, like me.
Restore stock Hard SPL. It's posted in this forum.
Run SEUS in the administrator account of Vista.
If you don't do any of the 2 previous things, it won't work!
Best regards.
Hi!
Solution from http://forum.xda-developers.com/showthread.php?t=519317&referrerid=1836412
Clear the Checkbox : USB Connection allowed, in the Vista Mobile Devicecenter (before connecting the USB cable to X1). After that the SEUS can identify the X1 and continue with the guide.
Regards
Marcus
Thanks to Marcus that was the perfect solution i spent 6 hours trying to figure this out you are the first one to offer a non flash option.
Cheers
Hey Folks,
i have problem while upgrading. I have a Blue Angle flahed last year to WinMo 6.1 CE OS 5.2.20262 (Build 19949.1.2.0Black). I don't remember the release. But now i have i big problem. I cant upgrade to any newer or lower version.
I tried:
- Format Storage
- Hive Registry
- Disabeled und enabled Active Sync
- With/without Bootloader Mode
- three different RUU.dll
Everytime i try to upgrade (not in bootloader mode) i fetches rom version and proceed. But after 20sec it say connection error. In bootloader mode i doesn't fetch version and same message after 20 sec. Both tried with or without AS and on two different Computers und XP SP3.
Any help?
Sincerly - firstabalon
hi,
since you tried so much stuff before and seem to know your way around the device and the general upgrading process and i have hardly anything to suggest to go on trying. probably the only thing left to try is take another blueangel with either one of your pcs.
another thing is, i uploaded my ruu, which has always worked for me and everybody else who tried it.
i hope this helps, but i will keep on thinking and maybe i can still come up with more ideas.
chef tony...
i dont get it...
i dont know how to use this...
sorry...
i'm new in using the BA...
try and read this:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
step by step instructions how to upgrade with everything there is to do and all the files you need. even if you don't get what you are doing, by following it precisely you will get your device flashed.
thanks chef tony...
i'll try doing that later...
i really like the senior members here...you guys are so helpful...keep up the good work...you're the guide here...
firstabalon said:
Hey Folks,
i have problem while upgrading. I have a Blue Angle flahed last year to WinMo 6.1 CE OS 5.2.20262 (Build 19949.1.2.0Black). I don't remember the release. But now i have i big problem. I cant upgrade to any newer or lower version.
I tried:
- Format Storage
- Hive Registry
- Disabeled und enabled Active Sync
- With/without Bootloader Mode
- three different RUU.dll
Everytime i try to upgrade (not in bootloader mode) i fetches rom version and proceed. But after 20sec it say connection error. In bootloader mode i doesn't fetch version and same message after 20 sec. Both tried with or without AS and on two different Computers und XP SP3.
Any help?
Sincerly - firstabalon
Click to expand...
Click to collapse
Couple of things to try out would be to switch USB ports, try a different cradle (if you can get your hands on one), or try using mtty.
when i try to upgrade my xda!! with the usb data cable it sometimes sync with system & sometimes not. after sync when i try to upgrade it shows error 101 is there any real heroes who solve this problom !?!?
datacable is ok !
i've v1.3 xda!! it shows usb when connected with pc but not upgrading !!!!!!!
really funny for htc makers ...
it is essential to put power cradle with datacable when upgrading rom !?
where are the rom developers !?!?
hay bro give me some software or tricks which made activesync connection unbrakable coz xda!! ends partnership with pc.
it shows USB when connected with pc but can't runs the upgrade process.
bootloader screen shows USB
v1.03 without lightning screen but not upgrading !!!!
error 101? Thats connection error i think.
Just one thing. Have a look at the n00b guide to upgrading by ather.
SEARCH: himalaya n00b guide
That give details about upgrading on Windows XP Or Vista
flyboy
hay bro i try all that stuffs & guides but cannot get any ideas is there any tricks to make xda2 connected with system without brake it ???
can anyone gives me their sd card headers !?!?!?!?!?
it's possible afterwards putting it on sd card and then create .nbf files.
hay brothers plz help fast yaar before put it to garbage or throwing the device ha ha ha lol :*:*
hi have you downloaded latest activsinc i sometimes need to re down cause it plays up so reinstall it usualy do the trick another thing my device stays dark when i up it
maxoutputuk said:
hi have you downloaded latest activsinc i sometimes need to re down cause it plays up so reinstall it usualy do the trick another thing my device stays dark when i up it
Click to expand...
Click to collapse
nope bro,
the problom is not regarding active sync or system i think it gone out from its age lol..
actually it needs sd card headers from another himalaya... so if u've sd card header then send me...
regards.
flyboyovyick said:
error 101? Thats connection error i think.
Just one thing. Have a look at the n00b guide to upgrading by ather.
SEARCH: himalaya n00b guide
That give details about upgrading on Windows XP Or Vista
flyboy
Click to expand...
Click to collapse
hay bro,
what's up ???
actually i need sd card headers from himalaya, if u've that then send it to me.
Help with upgrading from windows mobile 2003 to 6.5
I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.
kaashp: Doesn't your himalaya read sd cards then?
mikeymcmk: iam willing to give you a guide, have you got msn?
i will guide you through it as your doing it.
It reads SD cards but i didnt manage to do it that way either.
I got an error message saying copy to SD card failed.
my MSN is [email protected]
if you email me at [email protected] and let me know when your online and what i need to download, il log onto MSN.
cheers mate, very appreciated.
(i receive my emails on the above email address near enough instantly)
KAASHP said:
nope bro,
the problom is not regarding active sync or system i think it gone out from its age lol..
actually it needs sd card headers from another himalaya... so if u've sd card header then send me...
regards.
Click to expand...
Click to collapse
Okay, from begining
Answer in points like I ask you questions
1. Can you enter bootloader? (serial text on screen without backlight)
2. Which Bootloader version do you have? It is written on screen when in bootloader mode at bottom (like 1.03v)
3. If you put your device into crandle (of course crandle is connected to usb in your pc/laptop) do USB text appear in place where Serial text was already?
4. Which system do you use? (Xp, vista, 7, linux, unix, amiga, commodore)
5. Do you have nk.nbf and Upgrade.exe or HimaUpdate(...).exe in THE SAME folder?
6. What happens if you run update application and click Next?
7. Did you tried to run in administrate mode?
8. Do you have x64 system?
9. Do you have himalaya? put out your battery and check if it is written PH10B or PH10A.
10. Did you tried another PC or another crandle?
11. Which rom you want to flash?
Answer here.
HI,
1. yes
2. v1.01
3. yes USB is displayed
4. windows 7. ( i have XP aswel which i tried and failed also)
5. Yes. Both files in same folder on my desktop.
6. it says checking information on your PDA then says connection failed.
I tried it when not in bootloader mode aswell and it said it was erasing everything off my PDA but then said connection failed straight away.
7. Yes tried it in admin mode but same error messages.
8. no not using x64 system.
9. under the battery it says PH10B
10. Yes, tried my laptop and also my desktop.same errors on both of them.
11. Ive tried a few ROMs. any ROM will do realy. just want to get rid of windows mobile 2003.
Thanks for your quick replies.
ive updated alot of phones from windows 2003 to windows 6.5 but this 1 is just stubbon lol.
could it be the handset is faulty?
im waiting for another handset to come which is identical but originaly on T-Mobile not O2 like this 1.
sorry for not getting back to you im only a noob 2 things may be wrong sounds like faulty socket on phone or faulty cable/cradle try wobbling the cable gently when connected all sounds obvious but we are talking grandad of mobiles you cannot as far as i know go strait from 2003 to 6.5 i just got to 6.5 if you get a stable connection you have to go 2003se then 5 from there went to swampys blue silk now aeroflylubys hybred 6.5 all running perfect also athers memory program came in handy i used microsoft activsync 4.5 for xp win7 is a brill os but xp did it for me
aeroflyluby said:
4. Which system do you use? (Xp, vista, 7, linux, unix, amiga, commodore)
Click to expand...
Click to collapse
ROFL! amiga!!! AMIGA FOREVER!!!!
Ive just had another O2 XDA II and a TMobile MDA II throught the post.
ive just ordered a new cradle today aswell, as the 1 I was using was slightly cracked on the bit that connects to the phone.
So that might of been the problem.
im unable to test until the new cradle comes (hopefully in the morning)
il keep you posted.
cheers
Hey! Mikey! Join our irc channel:
Server: irc.afterx.net
Channel: #himalaya
Or anyone can join who has anything to discuss about the htc himalaya.