Hi Guy's
I am getting annoyed with Internet Explorer. It keeps opening when I recieve a call. As I end the call there is a pop up box asking if I want to connect. I allways say no and then close IE. Does anybody know how to stop IE doing this as it is a pain. I only want to open it when I want to go on the internet and not on almost every call.
TIA
this could be a dumb question, but are you accidentally pressing the IE button with your cheek when you make a call?
Maybe not such a dumb question, considering where the button is it is possible the when i put the phone to my ear it does touch my cheek without my noticeing it. I will experiment.
if it is the case is ther a way to dissable that button
TIA
I cannot imagine that is the case; you have to press the button pretty hard (on my device anyway); I think you would hurt your ear or at least hear the "click" if you happen to accidently pressing the device that hard to the ear.
Martin
believe it or not there have been multiple TyTN users that never noticed the top rocker button... and there have been more than a few complaints about IE and Mail starting in the middle of a conversation...
coincidence? Methinks not...
My TyT sometimes srarts up IE for no apparent reason... ummm... Holy Crap! That bar over the lights is a rocker button? Crap, I've been using this thing for over three weeks and never knew about it. Thought the drawn on icons were just to represent the lights (internet happens to be above the WiFi light). Wonder how I missed that, considering I have read the entire instruction booklet.
Hi Guy's
Well I have solved my problem with IE, as goestoeleven pointed out I could be pressing the "WnW" button by mistake. Well I had a call today which I did not put the phone to my face but used the speaker, yep it still did it.
The problem I found was not to me pressing the button on the phone but putting it into the case supplied with the phone. As you can see the buttons are slighly raised (this does not help).
Every time I put the phone into the case, because the lid has two strong magnets it slaps shut quite hard. This force causes the button to be pushed in and thereby starting IE. This tends to happen mainly if the screen is facing out.
I thought it was every time I answered a call that IE started but it was already on from the last time I put it in the holster.
To resolve this make sure the screen is facing inward so the magnets are on the back, this should reduce the impact.
But!!! I supposed if you have the phone on the holster and nock into something this cauld also trigger IE.
It would have been better if the button were recessed then it would not happen.
I hope this will solve this issue for some of you at least
P.S. This will might also answear the "Mail" starting on its own as the button is also on the same rocker although this has not happend to me...
mutsoft said:
phone on the holster
Click to expand...
Click to collapse
Its a phone not a gun :lol: :lol: :lol:
This problem has happened to me a few times and ive put it down to me touching the wnw button at the top when taking the phone out of the case.
Hi all,
I keep noticing that when my phone rings....most of the time, something is answering the call
It usually happens on the process of taking the phone out of the pouch
i take it out from the sides, never touching the screen but when I have it in my hand, the call has been answered for a few seconds
anyone know how to prevent this? Never happened in any of my windows phones
Is there any chance that it is checked the auto answer option in the phone settings on tha last-right tab (after xx rings.....) ???
Got the same issue with mine; this drive me crazy as I am often saying bull**** while taking my phone out of its case... It happend only when I take it out of its case, but as it is always in its case it may not be the right explanation.
The autoanswer is def not checked
I just re-installed the firmware and left it as if it... same issue
its almost certainly linked to the case in some way that is touching the answer button on screen (i dont think its the physical button itself)
Was there ever a solutions for this?
I tried another case, with a different the magnet at the different place and the issue seems to be gone. But, sadly I get other issue; still because of the magnet I guess. Just try to avoid magnet
hhmmmm is there a way to diable the answer button when a call is coming in, until I hit power or something?
Hi everyone,
I'm experiencing a very weird problem, with my Trinity (actually a p3600i).
When I'm using my thumb or fingers to type on any SIP, sometimes the start button is pressed even though I'm no where near the start button!
I'm not sure if it's happened when NOT using SIP.
I've noticed that it only happens when using my thumb/fingers. If I use my nails to type the problem never happens. Same when using the stylus, no problems...
Anyone know what is going on here? It can be very annoying sometimes.
Thanks for reading!
OK I just made it happen when just in the today screen.
Doesn't just happen when using any SIP...
Happens when I'm tapping in the bottom left region of the screen in portrait mode.
you are not alone
have the same problem, occurs couple of times a day, and as you noticed when using fingers. we are not the only ones, many (really!) trininty users report the same problem. finally it may result in widely known problem related to flickering start menu button and irreactive touchscreen.
i noticed one more thing: when you disable sound for screen taps from sounds and notifications menu the erratic reactoin seems to go away, not completely, though because i still manage to cause false start menu activation by chaotic screen tapping in phone mode.
read this topic, sorry to disappoint you but imho this is our nearest future
http://forum.xda-developers.com/showthread.php?t=295043
looks like i will need to send it to them for repairs
and nothing ever returns back the same, when it goes to get repaired
the u/2 button stopped working and starts randomly pressing itself every time i turn it on... and it randomly presses itself during texting as well and the u/2 button doesnt work its kinda getting annoying now.... can any one help or have any suggestions on what to do.... thanks
any ideas?
u/2 ...? What is that...?
It's probably similar to what happened to my Toshiba laptop. I'd get a pattern of letters/symbols when typing on it, because the case/keyboard screws were too tight and it spontaneously would generate these signals. I'd bet something smacked your keyboard or it was pressed too hard and something broke inside.
It's probably not user repairable, at least not easily, and probably a warranty workable item. Flash back to the stock ROM and send it in, especially if this only occurs when using the slider keyboard.
Hope it helps, even if it is bad news.
ElProempie said:
u/2 ...? What is that...?
Click to expand...
Click to collapse
the u button on the keyboard.... and i dont have warrenty on it because i bought it off ebay and i live in canada its a tmobile phone. theres no way i can fix it? like it presses itself when i turn the screen on and sometimes when im writing texts.... but the actual "u" button doesnt work when pressed
It can be fixed, but I don't think it will be easy. That is, if it is similar to what I am thinking. If you're daring, or desperate, you can try disassembling the unit to see if something is cut or pinched, causing a short.
Is anyone here familiar with the hardware side of this unit?
dirtisgood said:
It can be fixed, but I don't think it will be easy. That is, if it is similar to what I am thinking. If you're daring, or desperate, you can try disassembling the unit to see if something is cut or pinched, causing a short.
Is anyone here familiar with the hardware side of this unit?
Click to expand...
Click to collapse
I think it doesnt make a good contact with the mainboard.
If you press the button, does it feel different then other buttons..?
Otherwise it could be alot of things but the best thing to do is to take it to your carrier store.
Maybe they could do something for you.
nope the button feels just like any other button when i turn off the screen and turn it on it dials 2 a few times... and when i text sometimes the u button repedetly comes on the screen.... =( its so annoying
Okay I wasnt going to post about this cause there have been way too many posts and alot of back and forth and debates and even flaming, but I stumbled across something that I think is the cause for MAJORITY of the issues with why we keep having this happen. It Happened to me Today, and I Found the cause.
Before ANYONE Flames me for bringing this up, READ the post, Remember I solved the cause of why it happens to most of us, I dont take responsibility if you choose to take it upon yourself to fix it! And I know 90% of the users are going to tell me I'm wrong or I dont know what I am talking about, so be it.
If you have nothing to add other then flaming the post, just hit the back button and be on your merry way and pretend you never saw it. But I am 98% sure I am right about why its happening!
So if your interested read on:
I actually for the first time had this, and I know this is going to get flamed but its not the Screen thats the problem. And I think (BIG IF) that the dreaded unresponsive screen issue that we keep reading about Majority of them I think is not the screen.
I have 2 HD2s and both have worked flawlessly without any problems, but today I was playing with my test phone that doesnt get used that much and I noticed after installing a new rom that my screen after I played with it for a bit went black (sleep) and when I woke it up it wouldnt respond, first thing that crossed my mind is I just lost my digitizier, and started wondering okay why, I went as far to re-flash WinMo stock HD2 rom, same issue, so I decided its time to find out exactly whats causing this, and I found it. I wasnt going to make a post again cause I figured people would be "Not another thread about this" but I know whats causing the screen issue, at least this is my suspicision and I have temporarily fixed mine.
The problem is HARDWARE, The Culprit: THE END KEY (Red Button)! The Answer to "How or Why": The "End" key is used to turn the phone on and off or to put it in sleep mode, it is the most used key out of all 5 keys, it is used probably 7x more then all the rest, Its used for just about everything, now how does this cause the unresponsive screen? Easy, the phone lock or sleep is associated with this key, Its the only way to make the screen go off other then waiting for the time out period. Because by habit we mostly hit the end key to turn the screen off the phone automatically associates this with locking the phone, once that happens the screen becomes unresponsive because of several reasons: 1) The contact under the actual key has dirt which causes the button to stick in the down position, 2) the contact is bent which the "end" key is pressing down on the contact which is making contact with the board and causing it to be unresponsive, 3) The contact is worn. This is the reason why if you press the end key a few times (anywhere between 2-10) and then try the screen responds, this is cause your "unsticking" the key which then lets the screen respond.
Most of us when we hit the end key press to the far right to avoid hitting the back key (The button with the left arrow) which causes the end button to lean toward the right. But you can wake the phone up with the other 4 keys to the lock screen which will allow you to unlock the phone. As a temporary fix for myself, on my test phone I now make sure to press on the left side of the key to prevent this from happening, since its a test phone I'm not worried, but the real solution is to take the phone apart and clean the underside of the end button, and the actual contact with alcohol to remove the build up of dirt and whatever else. And also if the contact frame is bent to GENTLY bend the right side back up alittle to stop it from happening, or sending it to htc and letting them fix it.
We have to RE-TRAIN ourselves to start using the other keys to wake the phone up and not rely on the end key so much.
Hope this helps anyone finally why we have this problem. And if it works for you then hit the Thanks button
I completely agree with you. I've had the "dead digitizer" since December. It was pretty apparent it was a hardware key problem, as I could generally solve the issue by pressing the "Off" button to turn the screen off, and then one of the other keys (usually the back button, but occasionally one of the others) to wake the screen up, and the digitizer would be alive again.
As I am still under warranty, I sent mine off last week, and expect to hear back within a few days. But if I had the confidence to open it myself, I was sure it would be fixed with a good clean.
Anyway, thanks for crystallizing all this into a post. Thanked!
THANK YOU SO MUCH FOR THE INFO. i have had so much trouble with unresponsive screen after installing typhoon 2.6.3 and it from holding down the red button all the time for install and the past millions times for everything else.
Thanks for the heads up
Sent from my HD2 using XDA App
U maybe be right about why this issue happens but if u rely on other key then will also wear out soon ...
What I did is I remapped my volume up n down keys to power and back button which I believe are the most used in android and then found a app to manage my volume in android that way I don't lose my sound on rhw phone
Also I went ahead and got a another app which places virtual buttons on ur screen so u can use then instead of the actual hardware buttons
For button remapping
get the BUTTONREMAPPER for android and for on screen android buttons get BUTTON SAVIOR
hope this helps
Sent from my HTC HD2 using XDA App
Good to know... will now wake my phone up with the green key as its hardly used in Android. Button Savior is a great app, been using it a while now. Took a bit to retrain myself to not use the back key.
Sent from my HD2 using XDA App
i'm going to agree with your hypothesis or at least suspect that dirt is probably a bigger factor than most people think in these cases. i just bought a non-responsive phone today and while i stuck my nail (yes, i should probably clip them) around the edge, in between the screen and housing, i was surprised to see just how much dirt was in between that crack. same with the area around the buttons; there's a lot of grime there.
since i just got the phone i haven't even opened it up but the first thing i'm planning to do is give it a good interior clean around the buttons for sure as that seems to be the sensitive spot. touch screen devices are very delicate and the micro particles of dirt which build up over time probably create a hazard that people really don't really anticipate. compound that with having to mash on those buttons all the time probably crams the debris in there even tighter.
i'll attempt to clean and check the contact as you suggested and will report back if it helped in my case.
About hardware keys:
I don't use them at all, only for wake up the phone (it can be wake up with any key)
There is an app in market called "button saviour" it's just excellent app to keep your hardware keys for a long time
AngelDeath said:
The problem is HARDWARE, The Culprit: THE END KEY (Red Button)! The Answer to "How or Why": The "End" key is used to turn the phone on and off or to put it in sleep mode, it is the most used key out of all 5 keys, it is used probably 7x more then all the rest, Its used for just about everything, now how does this cause the unresponsive screen? Easy, the phone lock or sleep is associated with this key, Its the only way to make the screen go off other then waiting for the time out period. Because by habit we mostly hit the end key to turn the screen off the phone automatically associates this with locking the phone, once that happens the screen becomes unresponsive because of several reasons: 1) The contact under the actual key has dirt which causes the button to stick in the down position, 2) the contact is bent which the "end" key is pressing down on the contact which is making contact with the board and causing it to be unresponsive, 3) The contact is worn. This is the reason why if you press the end key a few times (anywhere between 2-10) and then try the screen responds, this is cause your "unsticking" the key which then lets the screen respond.
Most of us when we hit the end key press to the far right to avoid hitting the back key (The button with the left arrow) which causes the end button to lean toward the right. But you can wake the phone up with the other 4 keys to the lock screen which will allow you to unlock the phone. As a temporary fix for myself, on my test phone I now make sure to press on the left side of the key to prevent this from happening, since its a test phone I'm not worried, but the real solution is to take the phone apart and clean the underside of the end button, and the actual contact with alcohol to remove the build up of dirt and whatever else. And also if the contact frame is bent to GENTLY bend the right side back up alittle to stop it from happening, or sending it to htc and letting them fix it.
We have to RE-TRAIN ourselves to start using the other keys to wake the phone up and not rely on the end key so much.
Hope this helps anyone finally why we have this problem. And if it works for you then hit the Thanks button
Click to expand...
Click to collapse
You just hit d nail on d head pal...My HD2's touchscreen also stopped responding and nothing i did (software-wise) worked...i flashed several WinMo ROMs and Android builds with no luck, till i read somewhere online dat some guy seemed 2 solve his touchscreen issues by installing "CleanRam", ran a level 3 clean up (use MyMobiler for this) and by pressing real hard on the red end key button..I did just dat and voila it works!!
I have a Tmobile HD2 which is no longer covered under warranty and i'm not willing 2 part with almost $200 here 2 have d whole lcd & digitizer replaced...I recollected dat in d forum i read the suggestion from, a lot of ppl came n posed their views on why it's not possible but i tell u it is cuz it worked for me..Nw i'm comfortably dual-booting WinMo & Android via sd. i use "button savior" and "extended control" to navigate and power down/reboot respectively.
Hweva i believe its not a permanent fix as it simply refuses 2 allow me run android full-time thru MAGLDR, & i think i know y..pressing down on d end button 2 launch MAGLDR/CWR options after install messes up d connection with d digitizer underneath and d touch screen thereby causing it 2 fail again when android boots up....I just might try opening it up myself n cleaning dat area up as u suggest but dat'll be when my current fix fails cuz as d saying goes "If it aint broken? then don't fix it"
Just installed Button Remapper, and not to sound like an idiot, but can someone tell me which one I would have to remap to make the volume up key or down key to put the phone to sleep and wake it up, and would that still be able to use the volume key to turn up and down the volume as well?
AngelDeath said:
Just installed Button Remapper, and not to sound like an idiot, but can someone tell me which one I would have to remap to make the volume up key or down key to put the phone to sleep and wake it up, and would that still be able to use the volume key to turn up and down the volume as well?
Click to expand...
Click to collapse
Hmm...i don't use d app but from wat i can gather on d dev's thread, you would have 2 remap ur volume keys to "Power"...Also checkout dis review 2 learn hw 2 mk d remapped button work even in sleep-mode.
I can agree but mine's been in twice on repairs with the same error but screen was replaced both times amongst the digitizer, backcover (Can't understand why) and 3 other things were replaced. Buttons weren't replaced.
CaCtuZ123 said:
I can agree but mine's been in twice on repairs with the same error but screen was replaced both times amongst the digitizer, backcover (Can't understand why) and 3 other things were replaced. Buttons weren't replaced.
Click to expand...
Click to collapse
If I'm to base how the HD2 is setup internally, they wouldnt replace the buttons, they would replace the contact or contact board under the buttons, remember the buttons are like a keyboard, they dont wear out, its what they push on that gets dirty or worn.
I was traveling and this happen t me and became desperate.
Following the instructions I come to the clear conclusion that our HD2 has this hardware problem.
If I do not use the end call button no issues with the screen, really, no issues.
Hope my feedback will be helpfull as well. Great job done here!
pauloviegas said:
I was traveling and this happen t me and became desperate.
Following the instructions I come to the clear conclusion that our HD2 has this hardware problem.
If I do not use the end call button no issues with the screen, really, no issues.
Hope my feedback will be helpfull as well. Great job done here!
Click to expand...
Click to collapse
Yeah HTC screwed up on dat...its just as said,1 has 2 be careful n avoid using d red end key button as much as possible 2 enable d device last much longer...And if u do ave 2 use it, press on d left-most part of d key (closer 2 d back arrow button) to get d job done.
I just had this issue happen to me and thought it was my build... But I found another way, I use Cyanogen Mod 7, and in the drag down menu (from the top) I added a sleep option, because thats the only thing I use it for... and I never have a reason to press the end button now.
This is the best thing I have found to fix it without having to remap the buttons
I guess I'm lucky because I have never had a problem with the responsiveness of the touchscreen and/or end button. I got my HD2 a month before TMO release date and trust me it has been thru alot (scratches all over, even a piece of glass missing next to the call button). So my question is how much pressure and wear 'n' tear are you all putting on your end button or phone for that matter?
big3d said:
I just had this issue happen to me and thought it was my build... But I found another way, I use Cyanogen Mod 7, and in the drag down menu (from the top) I added a sleep option, because thats the only thing I use it for... and I never have a reason to press the end button now.
This is the best thing I have found to fix it without having to remap the buttons
Click to expand...
Click to collapse
Can that be done with other roms? And wouldnt a shortcut or a widget on the main screen also work?
on1ydabest said:
I guess I'm lucky because I have never had a problem with the responsiveness of the touchscreen and/or end button. I got my HD2 a month before TMO release date and trust me it has been thru alot (scratches all over, even a piece of glass missing next to the call button). So my question is how much pressure and wear 'n' tear are you all putting on your end button or phone for that matter?
Click to expand...
Click to collapse
It all depends really Understand that not all HD2's go thru the same testing process when it comes out of the manufacturer. Also take into consideration that it also depends on how often you flash a rom, if your flashing a rom every day or every week expect that you will shorten the life of the end button, also it doesnt always mean that the button is bad, it could clearly be dirt underneath that could also be causing the issue. And I said the same thing when I saw posts about people saying that android killed their screen. I even responded to it but always maintained it was hardware, even though I didn have the problem, and I bought both my HD2's used in Dec. and the day it happened and I found out why I posted this, if I was to guess, I would say that I probably flashed both my HD2's close to 200 times with different roms, or upgrades, or testing fixes out.
So if your not a flash nut, then your probably safe. There are many factors that can play a role in the end button life cycle, And no two people use their HD2's the exact same way.
the non-responsive touchscreen problem happened to me this morning. I woke up trying to unlock my phone only to find that it would not respond to any touch gestures. I was however able to uninstall HSPL and Flash the stock WM6.5 rom since I was going to T-Mobile to get a replacement. When I took it to T-Mobile the employee resetted the phone by holding the 2 volume buttons and the power button then somehow the touchscreen started to respond to touch again. I was completely puzzled as I thought it was for sure a hardware problem. But now I'm going to flash Android and hopefully the problem will not arise again, if it does, back to T-Mobile I'll go!
What Android really needs is some sort of "X" button, or even a widget on the main screen that you can just tap and put it to sleep. The three most keys used in my opinion is the windows key (Apps that use it for a menu), the back key (Since there is no damn close button), and the end key (sleep, flashing, booting to magdlr).
Some one had a concept here of buttons that looked very similar to The desire HD, the greatest thing would be if someone could make the bottom of the htc sense (app drawer, phone, and the personalize) auto hide and have the desire HD buttons come up with a power button at the end and this way if you hit menu it would bring up the original 3 button screen.