Hi everyone,
I'm experiencing a very weird problem, with my Trinity (actually a p3600i).
When I'm using my thumb or fingers to type on any SIP, sometimes the start button is pressed even though I'm no where near the start button!
I'm not sure if it's happened when NOT using SIP.
I've noticed that it only happens when using my thumb/fingers. If I use my nails to type the problem never happens. Same when using the stylus, no problems...
Anyone know what is going on here? It can be very annoying sometimes.
Thanks for reading!
OK I just made it happen when just in the today screen.
Doesn't just happen when using any SIP...
Happens when I'm tapping in the bottom left region of the screen in portrait mode.
you are not alone
have the same problem, occurs couple of times a day, and as you noticed when using fingers. we are not the only ones, many (really!) trininty users report the same problem. finally it may result in widely known problem related to flickering start menu button and irreactive touchscreen.
i noticed one more thing: when you disable sound for screen taps from sounds and notifications menu the erratic reactoin seems to go away, not completely, though because i still manage to cause false start menu activation by chaotic screen tapping in phone mode.
read this topic, sorry to disappoint you but imho this is our nearest future
http://forum.xda-developers.com/showthread.php?t=295043
looks like i will need to send it to them for repairs
and nothing ever returns back the same, when it goes to get repaired
Related
Hi,
I'm having trouble with my dual lately.
Seems like my screen alignment has gone crazy, i cant tap the start bar anymore, it thinks im tapping richt beneath it, also when i press anywhere in the right side of the screen, i always tap on the lower right softkey, even when pressing on the 'x' button (this is not on the left side, tough). Only when i hold my finger down for about 5 secs, the touchscreen finally notices and then the alignment is a bit more normal (cube opens because of shifting the pressurezone) but still it is off.
It's kinda weird but it acts like the touchscreen is a 'startbar' smaller than the actual screen, since the alignment in the bottom is ok, but at the top it isn't.
I tried re-aligning about 20 times, but it only helped me for a few taps, and i dont want to align it anytime i have to tap on start or x ;( (i also tried hard-resetting)
Anyone know a solution??
I dont really wanna miss my dual for 2 weeks sending it for repair
Thanks in advance!
had a similar issue with mine before. had no choice but to have it sent in as it was a hardware issue with mine.
typing seems to messed up lately buttons get get pressed makes ms feel like itisn't working correctly
anyone get the same issue ?
i have the same issue sometimes. it happens if the phone is very cold, if its connected to pc or mains charger or if the battery is 15% or below. i uninstalled the sensitivity tweak which helped a bit
Martyn Day said:
typing seems to messed up lately buttons get get pressed makes ms feel like itisn't working correctly
anyone get the same issue ?
Click to expand...
Click to collapse
It might be worth realigning the screen. Go to Settings/Menu/All Settings then select the System icon, and then 'Screen/Align Screen'
You will get the old Windows Mobile 'crosshair' alignment screen which was originally designed for stylus input, but using the normal part of your finger that you'd use for typing, just press over the crosshairs. This may or may not help!
I'm finding that typing is OK, provided I have "aligned" the screen.
However when switching from portrait to landscape alignment goes out of whack. Ok when reverted back to portrait. Also following a soft reset, or switching phone off, a re-alignment of screen is required.
Does the device store the alignment info, or is it reset after each reboot?
Also does device store an alignment profile for both portrait and landscape?
Anyone else notice this, and is there a fix?
Has anyone else had the issue where you can press down on the screen, a tool bar or something and the screen starts to shake or the selector starts to auto select things. I get this a lot and typing is often very hard because it randomly selecting things when i am typing on the keypad.
I have seen it once when i put the phone down go through random menus, is this a fault or just normal due to sensitivity?
A|ex said:
Has anyone else had the issue where you can press down on the screen, a tool bar or something and the screen starts to shake or the selector starts to auto select things. I get this a lot and typing is often very hard because it randomly selecting things when i am typing on the keypad.
I have seen it once when i put the phone down go through random menus, is this a fault or just normal due to sensitivity?
Click to expand...
Click to collapse
Hi
I've had the same problem several times with both stock rom and cooked.
I turn it off, wipe the screen and it will usually revert to working properly.
Most would say it's a fault unfortunately. Personally I've returned mine for a replacement after a 'repair' which fitted a new screen made the problem worse.
See this thread.
This might be a relatively small problem but it can be a little annoying. The back button (right side of the menu button) seems to be a little less responsive and 'smaller' than the options button (left side of the menu button).
By smaller I mean I need to click it exactly at the right spot and the button reponsive 'area' seems to be very small compare to option button which seems to take up most of the left side allocated to it.
I am not sure if this is intented or some kind of software/hardware fault?
I read about upgrading touchpad firmware through *#*#2663#*#* but there are reports than this could brake the buttons completly.
If anyone has any information it will be greatly appreciated.
P.S phone is not rooted and I bought it from vodafone Ireland.
there are a few threads on the hardware buttons not working correctly try the search.
I found one about the back button, not a lot of info though.
http://forum.xda-developers.com/showthread.php?t=1057348&highlight=button
I have the same issue but also to another extent. Mine has an issue where sometimes it will double tap when I only press it once. This can get annoying. I do have a screen protector on and I'm not sure if that has anything to do with it.
Same thing happens to me ... but Its kinda rare(I am not using a screen protector). Does anyone know a solution? should updating firmware fix this?
I am thinking about asking for a replacement.
Replace it, same problem with my first unit, 20% of the presses didn't register
Sent from my GT-I9100 using XDA App
nomnompie said:
I have the same issue but also to another extent. Mine has an issue where sometimes it will double tap when I only press it once. This can get annoying. I do have a screen protector on and I'm not sure if that has anything to do with it.
Click to expand...
Click to collapse
I thought it was just me with the double tap when i press it once lol. Grrr its annoying man! :[email protected]
Sent from my GT-I9100 using XDA Premium App
So the only way to fix it is to replace it?
I would imagine someone can make a mod to the touchkeys for like a certain millisecond delay between presses to fix the double tap. People have patched hardware keyboards for stuff similar to that.
As far as the non-registering presses, that might have something to do with delay too. A smart developer would have to try and look at it though I'm just guessing here.
I haven't noticed the non-registered presses in a while, not sure if it went away with a new kernel or if I just got used to how to press it to make it work. The double tap happens more often to me now lol.
Happened to me on my first unit, back button was only responding about 50-60% of the time, on the 2nd phone back button was extremely sensitive ( as sensitive as the SAMOLED screen which is a huge plus) 3rd phone seems "normal"
Galaxy S2 back button getting pressed twice on a single press.
When I am in 2nd/3rd level screen of an app, back and menu button lights go off(but screen is on). While pressing back button sometimes it's going back 2 levels with one, single press! As if I have pressed it twice. It doesn't happen always though.
Is there any fix for this?
PS: I am using a screen protector. Will remove it and see if that's the culprit or not.
u shud b thankful mate..my home butoon stopped responding at all
Hi,
Sorry to hear that.
But how did it happen? And how old is your phone? It must be still under warranty. Did you try taking it to the service center?
Back button problem sgs 2
I was also having this annoying problem.....searched over XDA....and found some tricky (fishy) codes for updating touch firmware.....which may end up braking those keys....so i stayed away from those tricks..
i googled again and found one method which finally worked for me
To get sgs2 into sleep use power button...nd for waking up use home (centre) button...this worked for me
SGS 2/XWKF3/CF root
Odp: Back Button Problem
Sorry for digging it up. I have the same issue, sometimes back button is acting like it was tapped twice. Is there any sofware solution instead of replace any parts?
Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2
i had the same promblem and a full wipe did the job
Hi,
i have tome hassle with the hard press home thing.
Sometimes its working ok sometimes it does weird things.
for instance ... if i press the button hard it some times vibrates , when i let go it vibrates again and its unlocked... thats when i think its working correctly.
but sometimes it just vibrates two times although i didnt let go ...
sometimes on homescreen i swipe the homebutton slightly to clean it a bit... not hard pressing and its vibrating. sometimes one single time sometimes two times in a row .
anyone with the same issue ?
thanks
no one ?
Check what sensitivity you have the button set at. It could be too high or low.
I have mine set in the middle and never have an issue.
i tried severeal sensitivity settings ... sometimes it gets better and sometimes worse... but for me its not satisfying
i think i have to weit for an update or so ...
I had the exact same issue with my S8. Sometimes it just works, sometimes it doesn't detect it, sometimes it registers several hard presses even though I've barely touched it (sensitivity reduced as far as it goes).
This has been driving me crazy for the past week. The hard press function was unusable because of this.
At first I thought it's a software issue (something to do with calibration maybe?). I got an update which didn't fix it. I tried resetting it which didn't work either so I sent it back to Samsung yesterday. Waiting to see what they have to say about it.
The lack of complaints about this so far made me think it's just a weird issue with my unit.
I'm having exactly the same problem and it's driving me nuts for not knowing if it's a hardware or a software problem.
I've googled around and this is the only thread so far. Seems like there are very few people with this issue.
Let me know how the repair request went.
i sent it back also
new one is coming tomorrow ... lets see... will report
I have that issue too. Dont know what to do.
B-Man2005 said:
i sent it back also
new one is coming tomorrow ... lets see... will report
Click to expand...
Click to collapse
Oh wow, that's really fast. I still haven't heard anything from them. Did they give any information about what's wrong (hardware/software)?
no ... i didnt sent it back to samsung.
i bought it from amazon.de and ordered a replacement.
thats faster
it will arrive today then i can sent back my first one...
same here, having issues with the home press function .
I also send it back to the shop where I bought it
I´ve send mine back to the webshop also. My mate got his s8 2 days ago and his hard press was perfect and responded smoothly all the time. So i guess it must be a hardware problem.
Will share more info when i get feedback from the repair.
Same problem here, sometimes it works, sometimes (when the device is in standby) it works only after several tries and pressure in different spots.
Can someone who has got a new device or sent it to repair report if it is better now?
Hardware issue... my replacment Works fine now
Same problem
I have this issue also. Mostly it works, but sometimes it doesn't work and the phone hesitates to come back to life. If I press the power button after hard pressing the home button or just wait 5-10 seconds, the screen will come on. Oddly, when it doesn't work (and occasionally when it does), the small vibration thing happens. I have this turned off, but sometimes when hard pressing the home button, I get the vibration, but the screen won't come on. Other times, I get the vibration and the screen will come on. Mostly I don't get the vibration and the screen comes on. Annoying.
wmupchurch said:
I have this issue also. Mostly it works, but sometimes it doesn't work and the phone hesitates to come back to life. If I press the power button after hard pressing the home button or just wait 5-10 seconds, the screen will come on. Oddly, when it doesn't work (and occasionally when it does), the small vibration thing happens. I have this turned off, but sometimes when hard pressing the home button, I get the vibration, but the screen won't come on. Other times, I get the vibration and the screen will come on. Mostly I don't get the vibration and the screen comes on. Annoying.
Click to expand...
Click to collapse
As i said ... it seems to be a Hardware issue. Get a replacement
Mine does this often, i personally could care less for the home button function so I set the sensitivity to max and yet at times if I barely touch the home button area it acts like I have hard pressed the button.
Sent from my SM-G950U using Tapatalk
I have the same problem maybe even worse. To me it looks like it is accumulating presses, the more times I press the button the more times it vibrates. So at the end I sometimes get 4 or more vibrations for just one press. Sometimes after I lock the screen it vibrates by itself and turns on the screen.
Looks like I'll get mine replaced ASAP.
Got the same issue once in a while.. also have a faint red glow on the screen. Considering getting it replaced but dont want to wait for a replacement.