Related
I have a Qtek 9100 running the latest ROM and radio, etc on the Cingular network. The other day I get no signal, and reboot do not fix the problem. I take the sim card, and put it in a different phone. The other phone gets a signal, but says I can make emergency calls only. After about an hour on the phone with a Cingular rep I agree to drive to the store and get a replacement card. The replacement card fixed the problem. 4 days later, I am back to the same problem. The cingular rep is now blaming the phone after they can't figure out whats wrong. He is telling me the phone is "Zapping" the sim card. I find this hard to believe, but has anyone had this problem before? Has anyone ever tried to do an RMA with Qtek? Any help would be great, as i'm ready to put this 9100 on ebay and be done with it, unless an RMA with Qtek is worth it.
Happened to me last week with my 9100 (still running the original ROM). Got a new SIM and it's been running fine since.
i've had my 9100 rom on my 8125 for acout 2 weeks now without any major problems. the only problem I have is that it switches back and forth from gprs to edge a lot, but it doesn't bother me.
have you tried to reflash back to the cingular rom? it couldn't hurt.
I actually am running the Cingular ROM. I already replaced the SIM card 4 days ago, and it worked for about 4 days until it broke again. It doesnt make much sense, because something has to be corrupting the SIM card. When I ran *#*#364#*#* GSM utility, it would give me no data at all. Obviously the SIM card is dead (But still reads contacts on the SIM), and reauthorizing it does nothing to restore it. I will get a replacement today and verify the SIM continues to work in a different handset before I put it back in the 9100. Also I plan to factory default, and upgrade to latest ROMS etc before I try it again just in case. If anyone has any other ideas, let me know. Thanks.
aqueous said:
I actually am running the Cingular ROM. I already replaced the SIM card 4 days ago, and it worked for about 4 days until it broke again. It doesnt make much sense, because something has to be corrupting the SIM card. When I ran *#*#364#*#* GSM utility, it would give me no data at all. Obviously the SIM card is dead (But still reads contacts on the SIM), and reauthorizing it does nothing to restore it. I will get a replacement today and verify the SIM continues to work in a different handset before I put it back in the 9100. Also I plan to factory default, and upgrade to latest ROMS etc before I try it again just in case. If anyone has any other ideas, let me know. Thanks.
Click to expand...
Click to collapse
Aqueous, very much the same problem here. I got my Qtek9100 yesterday and I am connecting to Cingular. When I switch on the phone it takes forever to latch to network. The
Y.
Y..
Y... keeps happening for ever and ever. But once, it latches it stays on to it firmly. If I put the sim in my old phone Nokia3230, it just connects to cingular with a snap as soon as the phone is switched on. When I tap on the " Y " region it shows "searching...". I also tried doing a manual/automatic network detection in settings. During the time the "Y. Y.. Y..." keeps going, the manual detection of networks doesnt show a single network in the list. I dont know what could the problem be, since the sim just works perfect in old phone.
By the way, what does
aqueous said:
When I ran *#*#364#*#* GSM utility, it would give me no data at all..
Click to expand...
Click to collapse
do ? Can you let me know ?
Anup
I woke up this morning and the signal was good and strong. Then at 10 am there was no signal on the phone. Tried to get a signal outside and no luck. I called T-mobile but they don't really know what is going on. I tried flashing another radio to see if it was the radio and still same problem. Hmmm what could be the problem I am in New York. Any one else experiencing a signal problem? Or if anyone had this problem before and fixed it. Any help is appreciated.
You aren't getting anything? No 3G, Edge or just regular?
Nothing no 3G no Edge nor phone works its stays on searching
hard reset doesn't work either?
Nope ^^ tried removing battery, hard reset, changing radios, and manually choosing carrier... I will try the sim card in another phone to see if its the phone
Call tech support back they told my brother they have had several of these calls but no one called them back after they told them to go change their sim card.
We tried the SIM card in another phone and same thing-no signal. So he went to T-mobile store and was issued a new SIM. Still no signal. In my brother's case it has to be an account problem so your best bet is to start there. Maybe try a SIM from another account, even one from ATT should work.
Got it working Thank you all for the advice. Apparently it was a sim card problem. I got a new sim card and I am up and running ^^
Hello guys
I'm having an issue when my x10 says there's no Sim card inside and the problem isn't with my Sim card since I tried in my old phone and it works. Even other Rogers Sim card don't work. Anyway I tried taking the battery out and after 3 attempt its working again. So, I want to know anyone else having the same problem and what's the solution?
Sent from my X10a
I had the same issue but mine was a little different. My Xperia would not accept my rogers Sim ( 3 years old ) but it worked fine in all my other handsets.. it was the Sim card in my case and I was surprised to have it replaced free of charge.. also I found that some of the Sims are thinner than others so they would not have enough pressure to make a good contact. A quick fix from my friends Nokia was some clear tape on the back of his sim and it worked perfect.
Good luck!
htc fan89 said:
Hello guys
I'm having an issue when my x10 says there's no Sim card inside and the problem isn't with my Sim card since I tried in my old phone and it works. Even other Rogers Sim card don't work. Anyway I tried taking the battery out and after 3 attempt its working again. So, I want to know anyone else having the same problem and what's the solution?
Sent from my X10a
Click to expand...
Click to collapse
TMobile's customer service department told me to bend the sim card very gently to ensure good contacts are made. Did this on first day and not had any problems since (famous last words... I'll be digging out the tape by tomorrow!)
My Sim card is like 5 year old anyway It's working now
Sent from my X10a
All u guys with 5yr old simcards need to get rid of them! Those have like 28kb of storage on them, so their phone books are so, so limited!
I know! U use the phones memory, which is a whooooooole bunch! But if your phone ever crashed, all your contacts will be gone! U cannot always copy the entire list of contacts to the sim card, but with a newer 3G simcard, you can copy a lot more than your 5yr old sim card can hold.
These are free! Just walk into your provider's store and request a new simcard. U dont even have to show them what kind of phone u have (ahem!... those of us who are skimming with grandfathered data plans ). Just walk in and say "left my phone at work, but I need a simcard".
I think this thread will help you
as it does for me
http://forum.xda-developers.com/showthread.php?t=743818
I checked that thread, but I hadn't rooted my x10a yet. Going waiting until something extraordinary happens
Someday I will change my sim card lol
Hello
After I install FR008 , I LOST MY SIGNAL IN MY ARIA . I cann't even connect to the network at all . I keep getting no services or Limited services .
When i search Manually for an Operator I keep getting , the sim card can't be connected to ... .
HOW TO SOLVE THIS ISSUE ?
I have tried 2 radios .
1- liberty-radio47.41.35.10H_7.09.35.13-signed
2- liberty-radio47.54.35.20H_7.13.35.13-signed
HELO PLZ PLZ PLZ
Wow, odd. I had a similar issue. I would look at my phone and have no service (ATT in NYC - YOU GET SERVICE). Then maybe I thought it was my office building, nope. Also tried different radios. Nope.
Went to CM61.1 and never had another issue.
I had same issue randomly before. Though setting network types bring my signal back. In case you wanna try it:
- Dial *#*#4636#*#*
- Phone Info
- Bottom of the screen, try to change "Set preferred network type".
maevro said:
Wow, odd. I had a similar issue. I would look at my phone and have no service (ATT in NYC - YOU GET SERVICE). Then maybe I thought it was my office building, nope. Also tried different radios. Nope.
Went to CM61.1 and never had another issue.
Click to expand...
Click to collapse
it didn't work either on CM6.1.1
barisahmet said:
I had same issue randomly before. Though setting network types bring my signal back. In case you wanna try it:
- Dial *#*#4636#*#*
- Phone Info
- Bottom of the screen, try to change "Set preferred network type".
Click to expand...
Click to collapse
didn't work .
any other help ?
Do you have the cover on it?
jznomoney said:
Do you have the cover on it?
Click to expand...
Click to collapse
yes , i tried both way
The Phone is UNLOCKED thought .
I tried to put At&t SIM and It worked now . But when i put my Other SIM Card it doesn't work and It Says , Limited Services .
HOW TO SOLVE THIS ISSUE ?
dr.saad said:
The Phone is UNLOCKED thought .
I tried to put At&t SIM and It worked now . But when i put my Other SIM Card it doesn't work and It Says , Limited Services .
HOW TO SOLVE THIS ISSUE ?
Click to expand...
Click to collapse
Something similar to this happened to me.
I had CM6, and (without thinking) did a factory reset of the phone (Settings/Privacy/Factory data reset).
When the phone rebooted, it didn't recognize the SIM card. I almost [email protected]#t bricks. The card wouldn't work in any other phone, but other SIM cards worked fine in the Aria.
The solution was to un-root/reinstall stock at&t Android ROM and take it to the at&t store. They replaced my SIM card.
DanGeorges said:
Something similar to this happened to me.
I had CM6, and (without thinking) did a factory reset of the phone (Settings/Privacy/Factory data reset).
When the phone rebooted, it didn't recognize the SIM card. I almost [email protected]#t bricks. The card wouldn't work in any other phone, but other SIM cards worked fine in the Aria.
The solution was to un-root/reinstall stock at&t Android ROM and take it to the at&t store. They replaced my SIM card.
Click to expand...
Click to collapse
At&t sim worked fine after stock Rom even thought with FR008 Rom , but STC sim didn't work at all , and It was working fine before i Update .
dr.saad said:
At&t sim worked fine after stock Rom even thought with FR008 Rom , but STC sim didn't work at all , and It was working fine before i Update .
Click to expand...
Click to collapse
Did the STC SIM card work in any other phone?
I'm guessing that when you flashed the ROM, it hosed the SIM card.
Please check to see if the STC SIM card works in another unlo.cked phone. If it doesn't then it's been damaged. If it DOES work in another phone, then there's something going on with how your phone is interacting with the network/radio software on the device.
DanGeorges said:
Did the STC SIM card work in any other phone?
I'm guessing that when you flashed the ROM, it hosed the SIM card.
Please check to see if the STC SIM card works in another unlo.cked phone. If it doesn't then it's been damaged. If it DOES work in another phone, then there's something going on with how your phone is interacting with the network/radio software on the device.
Click to expand...
Click to collapse
DAMN
NOOOOO
It's not working NOW in my other phone !!!
what should I DO ???
plz i need help
dr.saad said:
DAMN
NOOOOO
It's not working NOW in my other phone !!!
what should I DO ???
plz i need help
Click to expand...
Click to collapse
It sounds like the SIM card is bad. You should get a replacement.
I'm not an expert on this, and can only suggest. If other cards work in the phone you're probably ok.
Sent from my Liberty using XDA App
DanGeorges said:
It sounds like the SIM card is bad. You should get a replacement.
I'm not an expert on this, and can only suggest. If other cards work in the phone you're probably ok.
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
I just called STC and they said there is a network problem in USA .
IS it possible ??
dr.saad said:
I just called STC and they said there is a network problem in USA .
IS it possible ??
Click to expand...
Click to collapse
What error are you seeing? When I had a problem, the device said there was no SIM card present. It wasn't just "no service."
If an at&t card works on the phone you are fine. You just need to fix carrier issues.
If you want, unroot and load the stock ROM from at&t and try the SIM.
Sent from my Liberty using XDA App
DanGeorges said:
What error are you seeing? When I had a problem, the device said there was no SIM card present. It wasn't just "no service."
If an at&t card works on the phone you are fine. You just need to fix carrier issues.
If you want, unroot and load the stock ROM from at&t and try the SIM.
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
i tried , didn't work
dr.saad said:
i tried , didn't work
Click to expand...
Click to collapse
What didn't work?
I'm trying to help (with my limited knowledge).
It really sounds like the STC card is bad.
When you start the phone, do you see a big picture of a SIM Card displayed? If so, that means one of the following:
There is no card present
There is a card present, but it is inserted incorrectly or not completely in the slot
There is a card present, but it is either deactivated or damaged
If you DON'T see a big picture of a SIM card when the phone starts, then the SIM card is in place and not damaged. You may not have service (there is an "x" on the top left of the signal strength bars). But the card is still good. It's also possible the card is not provisioned for STC. They can re-provision it. Call them and tell them the phone's IMEI number.
I really want to help!
DanGeorges said:
What didn't work?
I'm trying to help (with my limited knowledge).
It really sounds like the STC card is bad.
When you start the phone, do you see a big picture of a SIM Card displayed? If so, that means one of the following:
There is no card present
There is a card present, but it is inserted incorrectly or not completely in the slot
There is a card present, but it is either deactivated or damaged
If you DON'T see a big picture of a SIM card when the phone starts, then the SIM card is in place and not damaged. You may not have service (there is an "x" on the top left of the signal strength bars). But the card is still good. It's also possible the card is not provisioned for STC. They can re-provision it. Call them and tell them the phone's IMEI number.
I really want to help!
Click to expand...
Click to collapse
well , the sim is present b/c I can search the network Manually but when i chose At&t to register with it , it doesn't register with the Networks available . It says' Your Sim Card doesn't Allow Connection to this Network".
thanks
dr.saad said:
well , the sim is present b/c I can search the network Manually but when i chose At&t to register with it , it doesn't register with the Networks available . It says' Your Sim Card doesn't Allow Connection to this Network".
thanks
Click to expand...
Click to collapse
Ok...I think I'm understanding now. I didn't know you searched for networks and got the error message.
The error message "Your Sim Card doesn't Allow Connection to this Network" is a good indicator that the SIM Card is defective.
Try the following. If they don't work, try purchasing a new SIM card.
switch to Airplane mode and back again
go to Settings/Wireless & network/Mobile networks and check "Use only 2G networks."
Go to the dial pad and dial *#*4636#*#* and select Phone Information. Scroll to the end and choose "GSM only" in the drop-down box above "turn off radio"
Go to http://www.amta.org.au/pages/amta/Check.the.Status.of.your.Handset and see if your phone has been reported lost or stolen and re-branded (I'm not sure where you got it, but it doesn't hurt to check).
If all else fails, I suggest getting a new SIM card from STC Mobile. Explain that it just stopped working and you need another one. They may charge you a small fee, but at least the phone will work.
Good luck,
Dan
It's working Now .
thanks
Yesterday I upgraded to a gs3 which came with a micro sim. I wanted to see if I could keep my old phone as a backup. Would the lte micro sim work in my non-lte full-sized-sim captivate/gs1?
After 3 trys i managed to properly align the micro sim in the full sized sim slot and it worked. But then the weird part. Without powering down the phone I plucked out the sim (possible because the micro sim is so small). To my surprise the phone did not give any error and both data and voice calls continued to work without a sim actually in the phone.
How was that possible? Further, what would have happened if I had booted up my new phone with the sim card that my old phone still thought it was using (I was too afraid to try)? Would both phones continue to work? Would they both ring when someone calls?
Sent from my Cyanogenmod 9 Kindle Fire using Tapatalk
any sim should work as long as its activated and its the same size.
and no they both wont work, the phone that has no sim will show "no sim" upon reboot
ovoxo said:
any sim should work as long as its activated and its the same size.
and no they both wont work, the phone that has no sim will show "no sim" upon reboot
Click to expand...
Click to collapse
Perhaps I was not clear. I removed the sim without turning the phone off and it continued to work. I know it should not, but it does. That is what I am asking, how is that possible? Does the phone only check for a sim when it boots, and from then on the sim is not needed?
Then what would happen if I boot up phone #2 while phone #1 still thinks that the sim card is in it.
I'm interested, try it and let us know what happens.
cypho said:
Perhaps I was not clear. I removed the sim without turning the phone off and it continued to work. I know it should not, but it does. That is what I am asking, how is that possible? Does the phone only check for a sim when it boots, and from then on the sim is not needed?
Then what would happen if I boot up phone #2 while phone #1 still thinks that the sim card is in it.
Click to expand...
Click to collapse
I'm not an expert, but I think all the SIM provides is a string of numbers that identifies the phone with a phone number. This is most likely cached in the device while it is on and it might not need the SIM card after it has already gotten the information. This might not pertain to all phones, maybe the Galaxy S3 was programmed slightly differently.
If you power down the phone and restart without the SIM, the phone will most likely ask you for a SIM.
It is an S1/Captivate that is working without a sim. And yes, when I reboot the phone it stops working. I'm not brave enough to try both phones at the same time. That seems like something that the phone company would notice.
I tried removing the SIM from my captivate while it was running, and for a short time it still showed signal. Soon after I got a message asking to put in a SIM and restart. I don't have an LTE SIM or microSIM to test with, but it doesn't seem likely that the cappy will continue to work without one. Or at least without starting with a regular SIM.
cypho said:
Perhaps I was not clear. I removed the sim without turning the phone off and it continued to work. I know it should not, but it does. That is what I am asking, how is that possible? Does the phone only check for a sim when it boots, and from then on the sim is not needed?
Then what would happen if I boot up phone #2 while phone #1 still thinks that the sim card is in it.
Click to expand...
Click to collapse
i Know that this is an old thread but i just wanted to say that with some networks, you can take the sim out and still use the phone locally. they only use the sim for international or roaming outside the country. thats what i got from Sprint before. i dont know about other networks
Pease cany any body tell me who can download apps frpm this software
:silly::silly: