Hi everyone,
I have freaking weird problem, I just cant use my phone anymore now.
And totaly have no clue wtf is wrong with it..
Today I got the 29.5 artemis rom, and installed it on my phone, using SSPL method
I've done it before with artemis rom only older version. And everything was working fine.
Well it kinda did the same with this newer rom untill I went to "Microsoft my phone" and it froze, and nothing worked to shut it down, so had to take my battery out and in again, it restarted. After that it froze when I pressed the off button, and after I pressed it again it just froze and didnt want to do nothing..
So after that I did the same again I had to take my battery out, and then in again.
So now it just dont want to pass the second "HTC" screen with RGD numbers on it.
So I tried to install the rom from my PC via the bootloader, and it gives me update error after a while watching in htc screen with 0% update on it..
SOMEONE HELP!?
I ******* want to smash the phone in piecess..
what phone you got?is it a tmous?
Try a reset it normals resolves this type of iss - or a factory reset
Well, the issue it freezes at that second screen and normal reset aint working, tried hard reset several times still nothing. Freezes at the second screen.
And I use eropean version of the phone. Dunno what tmous is tho.
Gonna try to get HSPL on it, Task 29 format see if it will do somehting
------
Edit
------
I think I got it working now, its been formatted succesfully, and now its installing the rom on the phone, hope it wont freeze at the same point (keeping the finger crossed)
------
Edit #2
------
Its working now
Related
Hi all,
Since last friday I'm the happy owner of an S200, until sunday atleast. After a soft-reset, initiated from windows, my device won't boot anymore. It hangs in the red-green-blue bootloader screen (says: IPL 2.09, SPL 2.09). I've tried soft-resets and hard-resets, but the device would consequently keep hanging in the bootloader.
So for the past few days I've been searching the web and just managed to update the ROM. I was expecting that updating the ROM succesfully would mean my device would boot again, but it still keeps hanging in the bootloader (saying IPL 2.09 SPL 2.15 now, so the update did take place).
Does anyone has any idea whats wrong with my phone? Or how to fix this? Please help.
* bump *
I've been searching further and tried to do a SD dump, but I'm getting the message I don't got enough rights to perform a SD dump. This meens my S200 isn't CID unlocked. Is there any way to CID unlock the device without the need of booting into WM?
The solution to your problem
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
hi syzzer,
i really feel with you - why? - i have the exactly same problem. after i tried to upgrade my rom from o2-germany to another one the device isn't starting anymore and hangs in the beautiful-colored bootloader. and now, if i just even want to re-install the same or another rom, doesnt matter which one, the s200 wont start again. i think this is a really unlucky situation for us to stand alone with our weak pda =) hoping for more help, otherwise we have to take up our warranty and try to get it fixed by the store we did buy it (if a rom-update damage is still in warranty )
good luck
budy!
awechris said:
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
Click to expand...
Click to collapse
in my case, the camera button is not pressed in... i truly don't know what to do hopeless? mhm?
greets!
budy!
hello Syzzer
I have the same problem, but i make a soft reset and it works.
Camera but + Com Button + Power
Wait until message appear.
You Get the message : For Hard reset press send
If you choose other key the system boots normaly.
I had already tried all your suggestions, but nothing seemed to work.
About a month ago I bought a Trinity. In the mean while, I forgot I had put my S200 in my bag and carried it around for a month. When I found it a week ago and started pressing random buttons, it suddenly booted and has been working ever since! The problem has gone as mysterious as it came. I can only imagine there was some hardware failure / dirt in my device that caused the trouble and is now gone / moved to some place it does not do harm. Because I already bought a Trinity, I gave the S200 to my brother. He's been using it ever since and did not have any problems. So keep your head up, there's hope!
I m also having the same problem
Now I am having the same problem, no button is pressed, and I can not install the NVID ROM
Actually I can install only a few ROMs, the NVID ROM was working before on my Neo perfectly but, I think it can be because I have changed many ROMs, from a month, actually I have tried different WM6 ROMs and I used NVID ROMs mostly for Step 1.
Now when I install any ROM, it shows a msg some nbf one after 80% or 95%
It can install the pdaviet first step ROM, but now the problem is that it hangs very much and it can not start Wifi, it has stopped working, a few more ROMs i have tried, but the WIFI is completely stopped.
When I press it in communication manager, it will show busy icon for a few seconds and will not start it in end.(I tried it in both WM5 and WM6, same problem, I also tried after soft reset and hard reset, the problem is still there)
Please someone help me out.
Dear people,
I am really searching all day how to unbrick my device, I tried everything, and still nothing worked so far. I got a phone from a friend who tried to update the software and probably removed the cable while flashing. Now when I turn on the phone the only thing I see is the boot logo and nothing happens after.
It is possible to go into the boot-modus (with the 4 colors). This way it worked for me to make a USB-connection with my PC. I tried a couple of roms but nothing worked so far, everytime when I try to flash the device, it will jump to the grey screen with the % bar and then I wait for it to go to the 100%, but when it goes to 1% the phone instantly reboots, this happens everytime I try to flash the device. After it reboots it shows the boot-screen (logo of the half-flashed rom)
I hope you got an answer for me to fix this phone. Like I said I was searching all day for an answer and tried several things but nothing worked so far, any suggestions? Please...
Hi,
Yes I tried the WM5 rom, but the same thing happened, after 1% the phone rebooted...
Hold on, trying another one right now that seems to work...
Okay I managed to fix the one using another official ROM
this one:
http://www.smartmobility.nl/_BIN/TRI_DT_NLD_1234042_103_6275_1380011_108_Ship.zip
Thnx at3m
You have to flash Hard SPL: http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66
Happend to me once, and after flashing this, never again.
chalid said:
You have to flash Hard SPL: http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66
Happend to me once, and after flashing this, never again.
Click to expand...
Click to collapse
Yeah after I put the official rom on again you need to hard-spl it. thnx ^^
I have read and read and read. I have "bricked" my phone in the past and fixed it. I have used, tested, and flashed many roms from this site (Thanks to all cooks for their work!) but I still consider myself somewhat 'new' to troubleshooting.
I woke up this morning to make some important phone calls today and as luck would have it, my phone was stalled again. It's been doing that for a few weeks now. My last flash was Open Touch 5.0 UL I believe (either that or 5.2 biggy) and it has been working great except for the occasional freeze.
EDIT: Forgot to add, the actual problem is now it won't boot up after it froze this morning. Just sits at the boot screen
So I've tried my other methods of fixing it... /edit
Except this morning nothing is working. I have tried flashing with Orig. T-mobile ruu, tried SD flashing with the RUU_signed.nbh, tried restarting the computer, phone, removing battery and sim... NOTHING! When trying the sd flash (which I've never done before today, it reads and tells me to push the down button but then goes to bootloader screen and just sits there. With the RUU I'm getting err 300 but I'm using the SAME RUU (4.10...) that I've used in the past to reflash my phone AND tried the new one (4.26...)
Possible problem: Does it matter what kind of usb cable you use? I don't have the normal one I use as I am not home but I figured usb is usb...
I've read about it being a motherboard issue, how common is this?
I've read somethings about MTTY, would this apply to me??
Please help, anyone who has any suggestion, I'll try it!!
Stats:
IPL 4.10.0002
SPL 4.10.0000
NOT hard-spl'd
Wing w/ Open Touch Project 5.0 or 5.2
actualy the sd method needs hard spl thats all i can really provide
I appretiate it, that I did not know... I could barely find anything on how to do it even.
im having the same problem bt instead of freezing da screen jus goes different colors or jus goes gray and stays der
Thats basically what mine did. The colors would get messed up and no matter what button i pressed it would not do anything. My advice to you edrift, is BACK UP YOUR STUFF NOW and reflash it asap if you can still reboot. I can get into my phone at all now.
yea i tink i might jus throw my phone away.dis is jus gettin rediculous
ok i have a issue with my fone my phone is stuck on the tri-colored screen which says:
TITA100
SPL-1.20.01ipro
well i am as u can see im not good with tech. stuff like this but i would like sum advice or ideas on how to fix my problem. well here is how it all happened. my fone started off fine, out of the blue it started turning off by itself, then coming back on. it will reboot fine then as soon as i touch the screen or try to text or call it shut off on me. first i thought my battery was dying. that didnt work kept it on the charger switched out the battery, still nothing ended up doing the same. so a fren told me to hard reset or press the ok button pwr n the reset button at bottom using the stylst. now im stuck in bootloader mode after i ran a program:
HARD-SPL-MFG
and was told to flash the fone, which i had no idea what to do the person who was helping me i didnt hear frm again n i was stuck in this tricolored screen what should i do? i just want my phone up and running so i can use it once again...if thats possible..it be great i love the phone n dnt want the money i invested into it wasted
thank you soo much,
If I had to guess, it sounds like you have installed a SPL that is not compatible with your existing radio and rom.
First thing is I would try downloading the stock rom for your phone, I believe you can download this from HTC's website, I would download the newest and the one prior to it. Try installing the older of the 2 first since your SPL that you do have is older, and if it fails to install, then try the newer of the two.
If it still fails, come back here and I'm sure somebody else can give you more advice.
BTC
My Touch HD doesnt respond, it hangs and restarts itself all the time. Today it chrashed totally and I cant start it no more. It comes to the text "smart mobility" then the softwareinfo in the right lower corner pops up and nothing more happens..
I cant do a hardreset. (tried with volumebuttons and powerbutton at the same time)
I cant upgrade the software..
Anyone had this issue before?
Servicecentre?
Sad times...
Cokey,
Can you even put it into the bootloader mode?
Cheers.
Ehrm, whats bootloader mode?
hold vol down, and press power on (keep holding volume down until screen comes on)
you should see a screen of 3 coloured bars
if you can do this, you should be also able to do hard reset. for a hard reset make sure you hold both the volume buttons down, and keep them held after you press power on
Tom
Okey, havent tried that yet. But hardreset wont work, with both volumekeys and power on...
I've just tried that bootloader mode and that works but a hardreset isnt working. It starts up as written above then the display fades out a bit. Nothing more happens...
Darn it...
Cokey said:
I've just tried that bootloader mode and that works but a hardreset isnt working. It starts up as written above then the display fades out a bit. Nothing more happens...
Darn it...
Click to expand...
Click to collapse
Cokey,
All is not lost, don't worry. If you can get into Bootloader mode, then you will be able to flash a new ROM onto it. Go to the ROM section and follow crackwhore's very detailed guide.
Have fun flashing!
Cheers.
PoisonWolf said:
.
Click to expand...
Click to collapse
Thx for the help...
After maybee 20 hardresets starts it finally started...
All seems ok with it right now... Will leave it on over the night so Im sure it wont hang/restart again..
Again thx for the help..
(Flashing is something I wanna try but I really want my OS to be in Swedish )
I have the same issues. I am constantly reflashing the ROM because the phone will not last more than a day before being stuck on the Smart Mobility screen.
I have been flashing all of Dutty's different ROMs including LEO R4 and WM 6.5 R14 Turbo, WM 6.1 etc every day for the past week. It still freezes daily and when reboot, it gets stuck on Smart Mobility Screen. I am ready to throw it in the bin!
Anyone got any ideas. Flashing ROMs isn't working or fixing it as I have tried all sorts. I have also upgraded the Radio yesterday, still doesn't help. Tried also a new SD card, again, still freezes.
jchiou99 said:
I have the same issues. I am constantly reflashing the ROM because the phone will not last more than a day before being stuck on the Smart Mobility screen.
I have been flashing all of Dutty's different ROMs including LEO R4 and WM 6.5 R14 Turbo, WM 6.1 etc every day for the past week. It still freezes daily and when reboot, it gets stuck on Smart Mobility Screen. I am ready to throw it in the bin!
Anyone got any ideas. Flashing ROMs isn't working or fixing it as I have tried all sorts. I have also upgraded the Radio yesterday, still doesn't help. Tried also a new SD card, again, still freezes.
Click to expand...
Click to collapse
Have you tried reverting back to stock rom to see if problem persists? If so, return device under warranty
J,
USPL or HSPL? Do you install any applications, or do you leave it as it is and it still crashes in a day?
Cheers.
jchiou99 said:
I have the same issues. I am constantly reflashing the ROM because the phone will not last more than a day before being stuck on the Smart Mobility screen.
I have been flashing all of Dutty's different ROMs including LEO R4 and WM 6.5 R14 Turbo, WM 6.1 etc every day for the past week. It still freezes daily and when reboot, it gets stuck on Smart Mobility Screen. I am ready to throw it in the bin!
Anyone got any ideas. Flashing ROMs isn't working or fixing it as I have tried all sorts. I have also upgraded the Radio yesterday, still doesn't help. Tried also a new SD card, again, still freezes.
Click to expand...
Click to collapse
No luck
I think my warranty is out the window when I tampered with the screws and broke the VOID Warranty sticker.
I have used both USPL and HSPL and same issues occurs. I think I have narrowed it down... if I don't touch the onboard memory, ie not install anything to the onboard memory or touch it too much in that area, then it will tend to be okay. It starts to freeze and lock up at Smart Mobility Screen whenever I copy stuff or active sync etc.... so far anyway.
Looks like its going in the bin... last resort tomorrow, revert back to stock rom and see how long it lasts.