Hi all,
Having an issue at the moment. I had originally flashed JG4, then JM5 onto my SGS (was originally Optus JF3), then decided to check out the Asia FW JH1, but when I try to flash back to JM5, Odin gets to the "dont remove download target" in the dialogue box and I'm left waiting...
After 30min +, nothing is happening... If I remove the phone, I get the connect phone to pc Icon on reboot.. I then have to reflash back to JH1 to get the phone working again......
Do I need to use a different PIT file, or is there something else I need to do.
Cheers for assistance in advance.
Hi everyone i have the note 3 n9005 version and its working on omega right now but i want to get it back to official.
I face a problem in which i get fail on hidden at odin3. I was reading in xda forum tha i have to install the .pit together to with the firmware.
So the last time i tryed i flashed this N9005XXUENB4_N9005DBTENB1_DBT on PDA and N9005XXUENB4_N9005DBTENB1_DBT_PIT on pit, checked re-partition and still got the same error... Fail at hidden. i was thinking to get my phone to a samsung engenir but they told me that i will pay 40euros and this made me try for one last time but asking for help here in the forum.
Thank you very much properly
Edit: I got fail again at odin3 but the phone started. I use the pin and then i got a message all the time saying "Process Android.process.acore has stopped"
DAY 1: My phone bootloops when i flashed a modem. So I flashed a firmware base on my country (Philippines N9005XXUEND6). I used odin 3.09 for flashing, did check the FRESET TIME, AUTOREBOOT, AP BOX and BOOTLOADER UPDATE.. It was successful but on the homescreen, "setup wizard has stopped" flashes on screen so I factory reset via stock recovery, then it runs ok.. Set up is done,. But another problems are:
1. entering camera, it shows black screen then says "warning: camera failed".
2. entering the phone dialler it takes seconds to respond
3. music is freezes
4. unlocking the phone it takes seconds to open
5.wakelock takes seconds also to respond
6. no sound
N9005XXUEND6 is the firmware I flashed.
DAY 2: I flashed a different firmwares XXUEND5, XXUENB4, but i notice that i after flashing, no setup wizard in the homescreen. It is the same settings,wallpaper and i have the messages and conversations in my inbox. It looks like the firmware didnt update but i look up in the baseband and build version it does change.. A friend of mind says that after flashing a firmware setup wizard must pop on the screen but mine doesnt.HELP ME MASTERS.. Im losing hope..
I cant figure out the problem, my drivers is installed, i have the firmwares, odin 3.09, and all required tools for flashing
please help me masters.. I did trying reflash the firware and do the reset, the problem persist.. thanks in advance
I have a similar problem, but I think yours is much more simpler hopefully
You find the data unchanged because you didn't do a factory reset
To do so, turn off your phone then open recovery mode by pressing VOLUME+, HOME & POWER buttons together until it opens
Choose Wipe Data/ Factory Reset --> Yes
then reboot your phone
My phone turned out to have a RAM problem and still haven't fixed it, it will cost me a lot especially that I voided my warranty because I rooted the phone
The same problem exactly!!! And I do all reset severel times! Help us!!!
Garri1980 said:
The same problem exactly!!! And I do all reset severel times! Help us!!!
Click to expand...
Click to collapse
If you could fix it don't forget to tell us about it
BTW I found a post online that says the problem could be due to separated camera from the motherboard
So if you don't have warranty as myself you should get it to maintenance service and tell them to check the camera
moustafaatchy said:
I have a similar problem, but I think yours is much more simpler hopefully
You find the data unchanged because you didn't do a factory reset
To do so, turn off your phone then open recovery mode by pressing VOLUME+, HOME & POWER buttons together until it opens
Choose Wipe Data/ Factory Reset --> Yes
then reboot your phone
My phone turned out to have a RAM problem and still haven't fixed it, it will cost me a lot especially that I voided my warranty because I rooted the phone
Click to expand...
Click to collapse
-i did that also sir but the problem persist..
moustafaatchy said:
If you could fix it don't forget to tell us about it
BTW I found a post online that says the problem could be due to separated camera from the motherboard
So if you don't have warranty as myself you should get it to maintenance service and tell them to check the camera
Click to expand...
Click to collapse
- Sir before i flash the modem, the phone works flawlessly but when it bootloops and i flash a stock firmware the other day the problem began to appear..
ian_drimworld73 said:
- Sir before i flash the modem, the phone works flawlessly but when it bootloops and i flash a stock firmware the other day the problem began to appear..
Click to expand...
Click to collapse
What is your Knox Warranty Void status ?
if it's still 0x0, you should send it to Samsung service
moustafaatchy said:
What is your Knox Warranty Void status ?
if it's still 0x0, you should send it to Samsung service
Click to expand...
Click to collapse
-0x1
ian_drimworld73 said:
-0x1
Click to expand...
Click to collapse
Then I guess your problem is like mine .. it could be hardware related :\
After I installed this ROM I found the camera working but not video camera and still can't play videos but there are no hangs
It still has problems but it sort of confirmed that I have a hardware problem
You need to be rooted
It's an AOSP ROM without Samsung Touchwiz ..
http://downloadandroidrom.com/file/...esurrection_Remix_KK_v5.0.9-20140416-hlte.zip
http://mirror41.downloadandroidrom....ock-4.4.2-20140207-signed.zip?token=866958839
Boot into Recovery .. Do a Factory Reset .. then flash the ROM then the gapps
moustafaatchy said:
Then I guess your problem is like mine .. it could be hardware related :\
After I installed this ROM I found the camera working but not video camera and still can't play videos but there are no hangs
It still has problems but it sort of confirmed that I have a hardware problem
You need to be rooted
It's an AOSP ROM without Samsung Touchwiz ..
http://downloadandroidrom.com/file/...esurrection_Remix_KK_v5.0.9-20140416-hlte.zip
http://mirror41.downloadandroidrom....ock-4.4.2-20140207-signed.zip?token=866958839
Boot into Recovery .. Do a Factory Reset .. then flash the ROM then the gapps
Click to expand...
Click to collapse
-thanks for the info sir.. but i guess its not hardware because i handle the phone carefully and it does not drop on the floor. I will thanks
-go to recovery, wipe data
- go to download mode, reflash via odin
reboot
arinsms said:
-go to recovery, wipe data
- go to download mode, reflash via odin
reboot
Click to expand...
Click to collapse
-I did that several times sir. still no luck
Hey, did you burn plywood the correct version of rum for your device? Moreover, you must make fool wipe, what version you had before making the root? That if there is a 4.3 to try to go back to 4.4.2
Sorry for bed English
Sent from my SM-N900 using XDA Free mobile app
ian_drimworld73 said:
-thanks for the info sir.. but i guess its not hardware because i handle the phone carefully and it does not drop on the floor. I will thanks
Click to expand...
Click to collapse
You said you tried updating the firmware of your region and the problem persists .. You should let someone flash the software using a BOX (not just using odin) (preferably go to Samsung)
if it's not solved then it's most probably a hardware problem .. I didn't drop my phone either but that's not necessary
Same problems with my n9005
ian_drimworld73 said:
DAY 1: My phone bootloops when i flashed a modem. So I flashed a firmware base on my country (Philippines N9005XXUEND6). I used odin 3.09 for flashing, did check the FRESET TIME, AUTOREBOOT, AP BOX and BOOTLOADER UPDATE.. It was successful but on the homescreen, "setup wizard has stopped" flashes on screen so I factory reset via stock recovery, then it runs ok.. Set up is done,. But another problems are:
1. entering camera, it shows black screen then says "warning: camera failed".
2. entering the phone dialler it takes seconds to respond
3. music is freezes
4. unlocking the phone it takes seconds to open
5.wakelock takes seconds also to respond
6. no sound
N9005XXUEND6 is the firmware I flashed.
DAY 2: I flashed a different firmwares XXUEND5, XXUENB4, but i notice that i after flashing, no setup wizard in the homescreen. It is the same settings,wallpaper and i have the messages and conversations in my inbox. It looks like the firmware didnt update but i look up in the baseband and build version it does change.. A friend of mind says that after flashing a firmware setup wizard must pop on the screen but mine doesnt.HELP ME MASTERS.. Im losing hope..
I cant figure out the problem, my drivers is installed, i have the firmwares, odin 3.09, and all required tools for flashing
please help me masters.. I did trying reflash the firware and do the reset, the problem persist.. thanks in advance
Click to expand...
Click to collapse
Hello guys what is described up is happening same to me ... tryied to update firmware from sammobile with a stock firmware Vodafone Romania and Odin show me some new lines when it updates like NON NHUL and a TGZ ZT etc ... suddenly failed to update .. and the phone freezed ... messagge was FAILED to update .. I did a restart and the two comps showed and the text : failed to upgrade firmware etc etc ... try use emergency firmware update trough kies ... restarted V Down +home +power : ) tryied to reinstal my fisrt NC2 Poland firmware succeded but
1. no sound
no camera
no music I guess That is a problem with the new Firmware ?Q? Probably we can ask MR. Chainfire or someone hwo knows ? I tryied all things ... but nothing happened even to restore data from kies /backup/trough Odin reflash old backup with TRP/CWM.
ANY ADVISE ? Never download even from sammobile or sammupdate if they say is ok if you never saw someone hwo succes
NEWS : I've noticed that suddenly when try to update again my Note3 shows only one language Chinese , probably becouse this new update NF at the end is for chinese exinos ????
1.Tryied to install CM last nightlies ...now the device work lmost 90%.
Bugs : No sound yet ...but i can acces settings sounds
E-mail has stoped
When i receive a call the phone shows answer/reject mode ..when i answer the phone become black screen amd keep vibrate.
Trying to call ...the phone call wizard has stoped wait/stop.
Things solved : Again can send and receive sms/mms
Camera works again and flashes
Sec android wizard works ...
Pit file euro open worked. I'm still having problems .
I checked. Again to see ...i tryied to install a singapore firmware nf6 I guess that was the problem.
solved mine
pisicutumic said:
Hello guys what is described up is happening same to me ... tryied to update firmware from sammobile with a stock firmware Vodafone Romania and Odin show me some new lines when it updates like NON NHUL and a TGZ ZT etc ... suddenly failed to update .. and the phone freezed ... messagge was FAILED to update .. I did a restart and the two comps showed and the text : failed to upgrade firmware etc etc ... try use emergency firmware update trough kies ... restarted V Down +home +power : ) tryied to reinstal my fisrt NC2 Poland firmware succeded but
1. no sound
no camera
no music I guess That is a problem with the new Firmware ?Q? Probably we can ask MR. Chainfire or someone hwo knows ? I tryied all things ... but nothing happened even to restore data from kies /backup/trough Odin reflash old backup with TRP/CWM.
ANY ADVISE ? Never download even from sammobile or sammupdate if they say is ok if you never saw someone hwo succes
NEWS : I've noticed that suddenly when try to update again my Note3 shows only one language Chinese , probably becouse this new update NF at the end is for chinese exinos ????
1.Tryied to install CM last nightlies ...now the device work lmost 90%.
Bugs : No sound yet ...but i can acces settings sounds
E-mail has stoped
When i receive a call the phone shows answer/reject mode ..when i answer the phone become black screen amd keep vibrate.
Trying to call ...the phone call wizard has stoped wait/stop.
Things solved : Again can send and receive sms/mms
Camera works again and flashes
Sec android wizard works ...
Pit file euro open worked. I'm still having problems .
I checked. Again to see ...i tryied to install a singapore firmware nf6 I guess that was the problem.
Click to expand...
Click to collapse
-bro my note3 is back.. just flash the singapore latest firmware at flash it via odin your problem will be solved! Godbless
NEWS
ian_drimworld73 said:
-bro my note3 is back.. just flash the singapore latest firmware at flash it via odin your problem will be solved! Godbless
Click to expand...
Click to collapse
I saw now the CSC is XSP this is the only prb but also is csc free no bloatware.also you can root back again and you can restore your old settings except :
1. CSC settings and APP settings that camed with your original firmware
2. when insert your sim back you will be notified to update internet settings to your provider ( for me Vodafone RO) , you can change them back to google.com . is ok THX for your apreciation.
Hello. I'm a new user of SM G900F (SG). Running on lollipop with latest firmware
Bought it on Dec 26th, the device doesn't have any problem. I was happy back then, jumping form Galaxy Mini 2 to S5 is a big difference experience.
Running on official latest firmware, i only updated the phone once., around 1st - 2nd week of January.
The problem is, on Jan 14th, the G900F fail to boot (bootloop) after i set a new lockscreen from my gallery. It failed to boot, after several attemps, and wipe cache + wipe data, it booted. Haven't backed up my data yet, but i'm happy my phone is working.
On 15th, the same things happened. I set a new lockscreen. It's stil fine. But when a web-browsing on Chrome, the screen is automaically turn off (when not in use in a periout of time), but i immediatey press home button to wake the screen up. the screen didn't turn on, i press the power button. Then the bootloop happened. And this time, i can't go to recovery mode.
I've tried to re-flashing the phone using odin with official firmware, the SG one. But it didn't work. It showed Reset! with blue box on it. But still, m phone is bootlooping. My phone is still bricked. Can't go to the recovery mode either.
P.S: The phone is 2nd handed device from Singapore. I'm an Indonesian, bought the SG version bcs the Indonesia ver (G900H) is still 3G. While the SG one is 4G already. I'm using Indonesian provider (Telkomsel) and works fine on 3G or 4G so i assume the phone is unlocked. I've test the phone imei and it showed that it's the real S5, not the replica one. Antutu test showed 48,xxx score and proved that my device is the real S5 (judge by the name of device written on antutu).
I don't use micro SD. 32 gb is enough for me.
Sorry for long post and bad english. Really desperate to bring life to my phone back. Thanks before.
UPDATE: sometimes when i plugged on the device on my PC with kies on it, it booted to the homescreen. I dont know what exactly i do that caused the device booted, i only remember after stopping the bootloop (installed boot.tar, using this *the 1st method* that caused my knox 0x0, geez i didn't know that), then i flash my phone using the latest firmware (that i believe it's the correct one), then i re-plugged it on my PC with kies open, it booted! But the samsung animation logo played waaaay to long than usual. But it worked. Tried to reboot the phone to check if it's worked completely, unfortunately the device still doing bootloop. Then i tried method 2 from this, failed on odin. Turn on the device, still being jerk by doing bootloop. I gave up. Waiting for solution.
What model number does it say in download mode?
*Detection* said:
What model number does it say in download mode?
Click to expand...
Click to collapse
G900F. I downloaded the G900F SG firmware, too. Since it came from SG.
To rule out firmware (ROM) being the problem, flash this PIT file along with the stock ROM (Same time) in ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Add the PIT file to the PIT section, and the ROM to the normal PDA or AP section, and flash them together
If it still bootloops after a while after doing that, it's likely a hardware issue
*Detection* said:
To rule out firmware (ROM) being the problem, flash this PIT file along with the stock ROM (Same time) in ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Add the PIT file to the PIT section, and the ROM to the normal PDA or AP section, and flash them together
If it still bootloops after a while after doing that, it's likely a hardware issue
Click to expand...
Click to collapse
what is PIT file? Read the PIT explanation here, i'm afraid it'd made my device being paperweight. So what's actually PIT file do for my bricked G900F?
Thanks.
firareza said:
what is PIT file? Read the PIT explanation here, i'm afraid it'd made my device being paperweight. So what's actually PIT file do for my bricked G900F?
Thanks.
Click to expand...
Click to collapse
It repartitions the phone, 100% wiping any old firmware, then the new stock ROM will be 100% clean and you will know if it is a hardware or software problem
How can something make your bricked phone a paperweight? It already is a paperweight
If you're gonna second guess everything you're told, enjoy your buggy phone
Hello. my tablet was playing up failing to connect to google play tried everything but nothing worked so i thought i would flash a new stock rom from samMobile.
everything flashes fine with odin but as soon as it gets to the system part it flashes hidden.img then fails. I thought nothing off it so i tried again.
but again as soon as it gets to the hidden.img it fails again. so i thought maybe its just the rom. So i downloaded another rom from same device from samMobile but everytime i try the roms i get to the hidden.img then fails i will leave attachments with this. See if we can get this fixed.
I fixed it by using Samsung smart switch software - seems like SamMobile is giving out faulty software
Closed per OP request