Hi everyone i have the note 3 n9005 version and its working on omega right now but i want to get it back to official.
I face a problem in which i get fail on hidden at odin3. I was reading in xda forum tha i have to install the .pit together to with the firmware.
So the last time i tryed i flashed this N9005XXUENB4_N9005DBTENB1_DBT on PDA and N9005XXUENB4_N9005DBTENB1_DBT_PIT on pit, checked re-partition and still got the same error... Fail at hidden. i was thinking to get my phone to a samsung engenir but they told me that i will pay 40euros and this made me try for one last time but asking for help here in the forum.
Thank you very much properly
Edit: I got fail again at odin3 but the phone started. I use the pin and then i got a message all the time saying "Process Android.process.acore has stopped"
Related
Hi Guys,
I had rooted my phone using motochopper then yesterday I received OTA update. Everything seems to be fine then later I started getting Samsung Text-to-Speech engine has stopped working everytime I opened Gallery. It was very frustrating, so I did factory Reset. After Factory reset when I go to last screen to startup my phone(Learn about Key Features:Air view, Air gesture) and click Finish. I get "Unfortunately Settings has stopped" error. I found the stock firmware here hxxp://galaxys4root.com/galaxy-s4-stock-firmware/ But every time I use Odin I get PIT Partition not found.
Please help guys, I am stuck, don't know what to do now. :crying:
You can get the stock firmware from the "Development" section and also a step-by-step guide how to do it...search the development section for it. You can also find a lot of information about the issue you are having with the "stopped settings" error, again you can search for the info. I would also suggest you research ODIN to make sure you have the correct boxes checked so you don't hard brick your phone. Good luck.
i had the same exact issue and tried ODIN. didint work. i used to KIES to restore my firmware and it works again! try using KIES.
scott14719 said:
You can get the stock firmware from the "Development" section and also a step-by-step guide how to do it...search the development section for it. You can also find a lot of information about the issue you are having with the "stopped settings" error, again you can search for the info. I would also suggest you research ODIN to make sure you have the correct boxes checked so you don't hard brick your phone. Good luck.
Click to expand...
Click to collapse
I checked all appropriate settings for ODIN before upgrading the firmware. I got the same error all the time. I will research "Stopped Settings" error and let you know if I find anything. Thanks for the quick response.
kuraijay said:
i had the same exact issue and tried ODIN. didint work. i used to KIES to restore my firmware and it works again! try using KIES.
Click to expand...
Click to collapse
Hi I am choosing "Firmware upgrade and initialization" option to download the firmware. I put my phone into recovery mode as per steps mentioned and click "Start Upgrade" it takes around 40-50 minutes to download the firmware, then after sometime I get failed to connect to the phone. It's weird the "Start Upgrade" option is only enabled after I properly connect the cable and Kies have recognized the phone. Then why after some time it would say failed to recognized please try again?
zukaa12 said:
Hi I am choosing "Firmware upgrade and initialization" option to download the firmware. I put my phone into recovery mode as per steps mentioned and click "Start Upgrade" it takes around 40-50 minutes to download the firmware, then after sometime I get failed to connect to the phone. It's weird the "Start Upgrade" option is only enabled after I properly connect the cable and Kies have recognized the phone. Then why after some time it would say failed to recognized please try again?
Click to expand...
Click to collapse
weird mine never said enter recovery. what i did was plugged in my phone and i did the ""Firmware upgrade and initialization" then it gose through all the agreements and downloads the firmware. then it'll auto boot in to download mode for the install. are you using the stock usb? which port are you using on your computer? is KIES up to date? do you have the right drivers?( then again i think kies will install them but just in case) try already being in download mode.
also you can try this http://forum.xda-developers.com/showthread.php?t=2261232
I tried same at&t stock firmware but this time I used Odin 3.0.7 like Adam recommended in another post to upgrade and it worked like a charm. Before I was using Odin 1.8.5 and I was getting Missing PIT partition error all the time.
Thanks all for the quick response.
kuraijay said:
i had the same exact issue and tried ODIN. didint work. i used to KIES to restore my firmware and it works again! try using KIES.
Click to expand...
Click to collapse
I get different errors trying to flash stock ROM in Odin too. Missing PIT error mostly. Now phone is stuck at bad upgrade screen. Kies won't detect phone to use that method to restore either. Any other suggestions??
stumpmuncher said:
I get different errors trying to flash stock ROM in Odin too. Missing PIT error mostly. Now phone is stuck at bad upgrade screen. Kies won't detect phone to use that method to restore either. Any other suggestions??
Click to expand...
Click to collapse
Read the post above yours. Use the latest Odin 3.0.7.
-Sent from my Samsung Galaxy Note II using Tapatalk 2
What NOT to do with a new S4
RMXO said:
Read the post above yours. Use the latest Odin 3.0.7.
-Sent from my Samsung Galaxy Note II using Tapatalk 2
Click to expand...
Click to collapse
Did. Wouldn't have appealed for help without first making sure I followed the OP's instructions perfectly. I know the rules. I read the other posts before posting. I'm here for 2 things: To learn how to get the most potential out of my devices and to contribute from my experiences when I can. Thanks for your prompt reply though...
EDIT: solution to my stuck phone problem was solved by visit to ATT store for replacement. I can tell you what happened to my 7 day old device that brought it to the point where it would not load through Kies or Odin:
Eager to remove Samsung & ATT bloat stuff, I rooted using motochopper then used Titanium Backup to remove all ATT related apps & some of the Samsung apps. I got the unlock icon on lock screen as others have after root. I removed Superuser and replaced with SuperSU. Unlock icon went away and phone status went back to official. This is when I started noticing the Samsung text-to-speech program would frequently FC during the launch of few apps. Internet would also FC during certain operations. I read of others having success installing the stock ROM with ODIN and decided to give it a try. At first I got the no PIT error then finally after a few repeated attempts it moved past that point but then failed for some other reason during installation. I did notice a little activity on the progress bar on my device during Odin flash, but when the flash failed, that was it. My device was locked up. My PC & Kies would detect the device but could never connect or mount the device. My guess is that some of the Samsung apps I deleted were tied to the Samsung engines and the lack of their presence somehow caused FCs. Comments and questions appreciated.
Got the same Odin Mode Recovery Kies problem, No Pit fixed with ODIN 3.07 used PDA and loaded normal firmware.
Hi there,
I have installed Cyanogenmod on my S4, but it isn't what i needed on my phone. So I want to revert back to the stock firmware. I planned on doing this via Odin, yet i don't manage to do so. I open Odin, load the PDA, wait for it to load, click on start and get a fail message: Fail (auth). On the S4 i see the text 'sw rev check fail fused 3 binary 1'. Next my phone won't boot anymore untill I flash CWM. I have searched the internet for a solution but I cannot find my problem anywhere. I'm in desperate search for a solution.
Hi guys,
I'm new to this forum, but in the last couple of days I have read and recieved a lot of help from people on this forum and I'd like to say thanks to everyone!
So, I have a Canadian GT-N5110 Note 8. I downloaded the update file off of SamMobile since I was running the US 4.2.2 Official Rom (long story that involves me messing up a flash and having to scramble to find a Stock ROM). I went to flash it using Odin 3.09, but it kept saying that the "MD5 Hash Value was invalid" and then Odin would lock up, say it was not responding, then finally an error message saying the Binary was invalid would come up. I searched online and found a weird solution: The full file name of the ROM that I flashed is N5110XXDNE1_N5110XACDNE2_HOME.tar.md5, but to actually get it to work I had to remove the "md5" part at the end. I thought I'd share in case anyone else is having this problem!
Hi everyone i have the note 3 n9005 version and its working on omega right now but i want to get it back to official.
I face a problem in which i get fail on hidden at odin3. I was reading in xda forum tha i have to install the .pit together to with the firmware.
So the last time i tryed i flashed this N9005XXUENB4_N9005DBTENB1_DBT on PDA and N9005XXUENB4_N9005DBTENB1_DBT_PIT on pit, checked re-partition and still got the same error... Fail at hidden. i was thinking to get my phone to a samsung engenir but they told me that i will pay 40euros and this made me try for one last time but asking for help here in the forum.
Thank you very much properly
Edit: I got fail again at odin3 but the phone started. I use the pin and then i got a message all the time saying "Process Android.process.acore has stopped"
any help please?
HitNrun_ said:
Hi everyone i have the note 3 n9005 version and its working on omega right now but i want to get it back to official.
I face a problem in which i get fail on hidden at odin3. I was reading in xda forum tha i have to install the .pit together to with the firmware.
So the last time i tryed i flashed this N9005XXUENB4_N9005DBTENB1_DBT on PDA and N9005XXUENB4_N9005DBTENB1_DBT_PIT on pit, checked re-partition and still got the same error... Fail at hidden. i was thinking to get my phone to a samsung engenir but they told me that i will pay 40euros and this made me try for one last time but asking for help here in the forum.
Thank you very much properly
Edit: I got fail again at odin3 but the phone started. I use the pin and then i got a message all the time saying "Process Android.process.acore has stopped"
Click to expand...
Click to collapse
which omega u r running?
on which bootloader u r?
nb4 is quite outdated bootloader. if u got by chance updated to any newer bootloader than what nb4 has, u can't flash nb4 anymore.
choose a newer firmware / or same firmware to ur bootloader.
cheers.
good nite
Sent from somewhere under the sky, at the corner of this rounded earth.
Hi all,
First of all sorry my English not that good,
and please read it to the end
few days ago I tried to downgrade from Lollipop 5.1.1 to Kitkat 4.4.4 which i found later it is something can't be done,
but back then processor failed and i get some things on Odin , it stops on sboot.bin and fail and my phone in download mode says : sw rev check fail device 2 binary 1
so as an android user i looked all arount the web and Xda forums and found a way to flash Kitkat with a way to avoid
sw rev check fail device 2 binary 1
which was to delete sboot.bin and modem and compress them to .tar again , and guys that was the dumbest thing i did,
My note won't start and says : FIrmware upgrade encountered an issue. please select recovery mode in kies and try again
so as usual I looked again and someone somewhere said "why don't you try PIT file"
so i tried and that work for me and WoW my note work again , and from then i I stopped all the Experiments at the poor Note 4.
but yesterday some App on my note (which require Root and I can't tell you what it is) do some weird stuff and reboot.
the devise work but this message appeared (com.google.process.gapps - unfortunately google play store has stopped) constantly, constantly and constantly ,and that is painful , so I backed up my files and wiped every thing and restart the devise but still getting the same message , so I tried flashing lollipop again but still getting the same error on download mode
sw rev check fail device 2 binary 1
so i used PIT file again but nothing worked
so you know the deal , I looked around and again someone somewhere said use CWM to deal with sw rev check fail device 2 binary 1
So i did , and get into recovery and I use every wipe option i did found,
and restart my note , and THIS IS THE END MY NOTE STUCK IN GALAXY NOTE 4 LOGO NO MATTER WHAT I DID
right now i am downloading Ukranian lollipop firmware but I don't think this will make a difference
Any help guys any solution to fix my phone , please i can't afford to pay to fix it
thank you in advance
UPDATE : My friend told my to root it again maybe it will work , but i just got the old recovery but still STUCK IN GALAXY NOTE 4 LOGO
So my device now working i just download this frimware
HERE
Ukranian one , and work like magic , I hope this thread work for someone else ,
If flashing the latest stock Samsung firmware back onto your device doesn't fix your problem. I would recommend taking it into a Samsung Service Center to see if they can fix it for you. If it's software based they will usually fix it for you free of charge.
DarkGuyver said:
If flashing the latest stock Samsung firmware back onto your device doesn't fix your problem. I would recommend taking it into a Samsung Service Center to see if they can fix it for you. If it's software based they will usually fix it for you free of charge.
Click to expand...
Click to collapse
Thank you for replay
So as I said I am downloading a newer one , and Hoping
And I can't take it to samsung because we don't have Service Center in Syria
GUYS THANK YOU FOR ALMOST NOTHING
no JK
So my device now working i just download this frimware
HERE
Ukranian one , and work like magic , I hope this thread work for someone else .
Glad that you managed to get your device fixed.