Hi Guys,
I had rooted my phone using motochopper then yesterday I received OTA update. Everything seems to be fine then later I started getting Samsung Text-to-Speech engine has stopped working everytime I opened Gallery. It was very frustrating, so I did factory Reset. After Factory reset when I go to last screen to startup my phone(Learn about Key Features:Air view, Air gesture) and click Finish. I get "Unfortunately Settings has stopped" error. I found the stock firmware here hxxp://galaxys4root.com/galaxy-s4-stock-firmware/ But every time I use Odin I get PIT Partition not found.
Please help guys, I am stuck, don't know what to do now. :crying:
You can get the stock firmware from the "Development" section and also a step-by-step guide how to do it...search the development section for it. You can also find a lot of information about the issue you are having with the "stopped settings" error, again you can search for the info. I would also suggest you research ODIN to make sure you have the correct boxes checked so you don't hard brick your phone. Good luck.
i had the same exact issue and tried ODIN. didint work. i used to KIES to restore my firmware and it works again! try using KIES.
scott14719 said:
You can get the stock firmware from the "Development" section and also a step-by-step guide how to do it...search the development section for it. You can also find a lot of information about the issue you are having with the "stopped settings" error, again you can search for the info. I would also suggest you research ODIN to make sure you have the correct boxes checked so you don't hard brick your phone. Good luck.
Click to expand...
Click to collapse
I checked all appropriate settings for ODIN before upgrading the firmware. I got the same error all the time. I will research "Stopped Settings" error and let you know if I find anything. Thanks for the quick response.
kuraijay said:
i had the same exact issue and tried ODIN. didint work. i used to KIES to restore my firmware and it works again! try using KIES.
Click to expand...
Click to collapse
Hi I am choosing "Firmware upgrade and initialization" option to download the firmware. I put my phone into recovery mode as per steps mentioned and click "Start Upgrade" it takes around 40-50 minutes to download the firmware, then after sometime I get failed to connect to the phone. It's weird the "Start Upgrade" option is only enabled after I properly connect the cable and Kies have recognized the phone. Then why after some time it would say failed to recognized please try again?
zukaa12 said:
Hi I am choosing "Firmware upgrade and initialization" option to download the firmware. I put my phone into recovery mode as per steps mentioned and click "Start Upgrade" it takes around 40-50 minutes to download the firmware, then after sometime I get failed to connect to the phone. It's weird the "Start Upgrade" option is only enabled after I properly connect the cable and Kies have recognized the phone. Then why after some time it would say failed to recognized please try again?
Click to expand...
Click to collapse
weird mine never said enter recovery. what i did was plugged in my phone and i did the ""Firmware upgrade and initialization" then it gose through all the agreements and downloads the firmware. then it'll auto boot in to download mode for the install. are you using the stock usb? which port are you using on your computer? is KIES up to date? do you have the right drivers?( then again i think kies will install them but just in case) try already being in download mode.
also you can try this http://forum.xda-developers.com/showthread.php?t=2261232
I tried same at&t stock firmware but this time I used Odin 3.0.7 like Adam recommended in another post to upgrade and it worked like a charm. Before I was using Odin 1.8.5 and I was getting Missing PIT partition error all the time.
Thanks all for the quick response.
kuraijay said:
i had the same exact issue and tried ODIN. didint work. i used to KIES to restore my firmware and it works again! try using KIES.
Click to expand...
Click to collapse
I get different errors trying to flash stock ROM in Odin too. Missing PIT error mostly. Now phone is stuck at bad upgrade screen. Kies won't detect phone to use that method to restore either. Any other suggestions??
stumpmuncher said:
I get different errors trying to flash stock ROM in Odin too. Missing PIT error mostly. Now phone is stuck at bad upgrade screen. Kies won't detect phone to use that method to restore either. Any other suggestions??
Click to expand...
Click to collapse
Read the post above yours. Use the latest Odin 3.0.7.
-Sent from my Samsung Galaxy Note II using Tapatalk 2
What NOT to do with a new S4
RMXO said:
Read the post above yours. Use the latest Odin 3.0.7.
-Sent from my Samsung Galaxy Note II using Tapatalk 2
Click to expand...
Click to collapse
Did. Wouldn't have appealed for help without first making sure I followed the OP's instructions perfectly. I know the rules. I read the other posts before posting. I'm here for 2 things: To learn how to get the most potential out of my devices and to contribute from my experiences when I can. Thanks for your prompt reply though...
EDIT: solution to my stuck phone problem was solved by visit to ATT store for replacement. I can tell you what happened to my 7 day old device that brought it to the point where it would not load through Kies or Odin:
Eager to remove Samsung & ATT bloat stuff, I rooted using motochopper then used Titanium Backup to remove all ATT related apps & some of the Samsung apps. I got the unlock icon on lock screen as others have after root. I removed Superuser and replaced with SuperSU. Unlock icon went away and phone status went back to official. This is when I started noticing the Samsung text-to-speech program would frequently FC during the launch of few apps. Internet would also FC during certain operations. I read of others having success installing the stock ROM with ODIN and decided to give it a try. At first I got the no PIT error then finally after a few repeated attempts it moved past that point but then failed for some other reason during installation. I did notice a little activity on the progress bar on my device during Odin flash, but when the flash failed, that was it. My device was locked up. My PC & Kies would detect the device but could never connect or mount the device. My guess is that some of the Samsung apps I deleted were tied to the Samsung engines and the lack of their presence somehow caused FCs. Comments and questions appreciated.
Got the same Odin Mode Recovery Kies problem, No Pit fixed with ODIN 3.07 used PDA and loaded normal firmware.
Related
Hey guys,please help me out.Today while Rooting International Galaxy S4 with CF-Auto-Root via odin,the odin encountered a problem and ended eventually interrupting the Root process.when I turn on the phone it says ''Firmware Upgrade encountered a problem.Use Kies to recover it.''
So i downloaded the official Jellybean 4.2.2.When I started installing this firmware via odin,its always getting stuck at Setup connection and eventually says Failed.This is happening again and again.I tried using different USB ports and using different PC,but still no success.
Please help me out guys,please.
nsnarayan10 said:
Hey guys,please help me out.Today while Rooting International Galaxy S4 with CF-Auto-Root via odin,the odin encountered a problem and ended eventually interrupting the Root process.when I turn on the phone it says ''Firmware Upgrade encountered a problem.Use Kies to recover it.''
So i downloaded the official Jellybean 4.2.2.When I started installing this firmware via odin,its always getting stuck at Setup connection and eventually says Failed.This is happening again and again.I tried using different USB ports and using different PC,but still no success.
Please help me out guys,please.
Click to expand...
Click to collapse
Option 1, Make sure no Kies is running in the background and try flashing using odin 3.07/04
Option 2, uninstall kies restart the system and re do the process of updating the firmware / try diffrnt ports and cable if possible
Option 3, If this does not work try latest firmware that should work
123hiten said:
Option 1, Make sure no Kies is running in the background and try flashing using odin 3.07/04
Option 2, uninstall kies restart the system and re do the process of updating the firmware / try diffrnt ports and cable if possible
Option 3, If this does not work try latest firmware that should work
Click to expand...
Click to collapse
Thanks for the reply bro,but some people say this can be solved with Pit file,but how do i download the pit?My friend is saying download it from My signature.
Now where is signature and how do I do it?
http://forum.xda-developers.com/showthread.php?t=2318447
In that link,the person said see my signature to download it,where is his signature and how do I do it?
nsnarayan10 said:
http://forum.xda-developers.com/showthread.php?t=2318447
In that link,the person said see my signature to download it,where is his signature and how do I do it?
Click to expand...
Click to collapse
I did it guys,I only flashed my phone with Pit file and nothing else.My phone is now booted!
I know this isnt the right place for this thread, but i lost my other login credentials and had to start fresh, so Im posting here....
Device: SM-T230NU
Problem: I used a website outside of XDA to root my device. I followed the instructions precisely too, I than unplugged the device hoping that replugging and restarting odin would fix the problem i have/had as displayed by the picture. I than tried rebooting the device, and got this error message: Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. Well I downloaded Kies 3, and much to my surpise I got an error message about the samsung galaxy tab 4 7.0 not being supported by Kies 3. I am now downloading Kies 2.6, so I can atleast get this device booting normally.
If you knew this was not the place to post, why did you post a question here? A play by play of your device root is not of much interest to anyone! I hope you got it fixed up anyway!
It's been fixed. I found an alternate DL site that had Odin in the package..I used ODIN to run cf_auto_root which created that firmware upgrade issue...I had to Odin firmware from the links I found on these forums...it's rooted now though
Hello guys,
I tried to root my SM-N900 this morning. I've root my Note 2 before and i thought it would just be the same. Unfortunately as i am starting to root with Odin, i've waited for hours but Odin is still not done with the phone and the download bar progression thing didnt move an inch. So with regret i turned off the phone and now it is stuck on "firmware upgrade encountered an issue" screen. I tried to download firmwares from sammobile but failed at 99% with a message of Unknown Network Error. So with that, are there any other solution possible? I've also tried Kies, but it wouldnt recognize my phone..
@bluws just download any stock firmware for your phone and flash it later with Odin. Use Odin 3.04 or 3.07 if 3.09 failed.
tetakpatalked from Nexus 7 flo
Make sure you are using correct Ver of root, make sure kies not running in bag round when you flash threw Odin, take care of antivirus
Sent from my SM-N9005
bluws said:
Hello guys,
I tried to root my SM-N900 this morning. I've root my Note 2 before and i thought it would just be the same. Unfortunately as i am starting to root with Odin, i've waited for hours but Odin is still not done with the phone and the download bar progression thing didnt move an inch. So with regret i turned off the phone and now it is stuck on "firmware upgrade encountered an issue" screen. I tried to download firmwares from sammobile but failed at 99% with a message of Unknown Network Error. So with that, are there any other solution possible? I've also tried Kies, but it wouldnt recognize my phone..
Click to expand...
Click to collapse
Try to connect your phone from the KIES program in a mode of emergency restoration of firmware by Model phone type and Serial Number of the phone. This may take several hours. To do this, you need a good internet.
bluws said:
Hello guys,
I tried to root my SM-N900 this morning. I've root my Note 2 before and i thought it would just be the same. Unfortunately as i am starting to root with Odin, i've waited for hours but Odin is still not done with the phone and the download bar progression thing didnt move an inch. So with regret i turned off the phone and now it is stuck on "firmware upgrade encountered an issue" screen. I tried to download firmwares from sammobile but failed at 99% with a message of Unknown Network Error. So with that, are there any other solution possible? I've also tried Kies, but it wouldnt recognize my phone..
Click to expand...
Click to collapse
Did you previously disable Knox? If you didn't, that can cause random problems, read about it in the newest Chainfire's thread in recent post:
http://forum.xda-developers.com/showthread.php?p=55325329
What kind of root process did you use Odin for?
tetakpatalked from Nexus 7 flo
Ty guys i got it working just by flashing a new stock rom. Tho now i am unable to call (no mobile services). Apparently it says that there are no sim card or something like that, does the region of the firmware i downloaded have something to do with it. Im living in indonesia (xse) but downloaded the russian stock i think.
bluws said:
Ty guys i got it working just by flashing a new stock rom. Tho now i am unable to call (no mobile services). Apparently it says that there are no sim card or something like that, does the region of the firmware i downloaded have something to do with it. Im living in indonesia (xse) but downloaded the russian stock i think.
Click to expand...
Click to collapse
Good it works again now!
Maybe it is just a baseband problem? I'm sure you will find an asian baseband only and be able to flash it.
Is your IMEI number still there? If yes, make sure to create backup of it now.
tetakpatalked from Nexus 7 flo
Guys,
I am not sure why I get the error Registering Device () / Process Failed when trying to check for Update Manually. I had my phone stuck on TMobile Screen. So I downloaded the latest G935TUVS3APD8 and flashed it with Odin.
Please suggeset if this is normal if there are no updates or I have some issue.
Not used Deboalt tool to disable anything at all.
Zaib
I had something similar and I also flashed the latest from Samsung though Odin and now I also get the same message when trying to update.
Any ideas?
zaibrockstar said:
Guys,
I am not sure why I get the error Registering Device () / Process Failed when trying to check for Update Manually. I had my phone stuck on TMobile Screen. So I downloaded the latest G935TUVS3APD8 and flashed it with Odin.
Please suggeset if this is normal if there are no updates or I have some issue.
Not used Deboalt tool to disable anything at all.
Zaib
Click to expand...
Click to collapse
IM ALSO EXPERIENCING THIS. I HAD FLASHED STOCK ON ODIN AND NOW I NOTICED MY 4g LTE now says 4g+ and some features on my phone doesn't work. Have you found a solution to the issue
Full odin flash. rather than flashing the standard CSC. make sure you are flashing the HOME CSC.
@artistictaurus this is the right way to reslove the issue.
fnztakedown said:
Full odin flash. rather than flashing the standard CSC. make sure you are flashing the HOME CSC.
Click to expand...
Click to collapse
So I should use "HOME_CSC*" instead of "CSC*" for the file under CSC?
Everything else the same?
Update: this process fixed my phone. Add all other files to the proper field and add csc_home to csc.
You can update your device on your PC using smart switch on your PC also
neno2323 said:
You can update your device on your PC using smart switch on your PC also
Click to expand...
Click to collapse
I was unable to. I had downloaded an app that rooter or attempted to root my phone and when I tried to update or re-flash, smart switch wouldn't allow it.
Just updated mine with the latest dated 9/27/16 and flashed with odin and its superb. No issues and no battery heating up as before.
I think there may be an issue when you do the update. ensure all options are selected in odin after you extract files that you downloaded.
There is also a video on youtube that is a great step by step.
Fixed
Thank you so much for the tips
So, newer versions of Samsung Smart Switch do not offer the option for "Device Initialization" anymore.
How can I do a similar procedure apart from an Odin stock image flash?
I tried Odin stock image flash, but could not get totally unrooted that way. And was hoping to get clean unroot by using Smart Switch.
Any way to get the Device Initialization done in Smart Switch? Or does anyone have the older Smart Switch install files?
Thanks!
http://www.filehorse.com/download-samsung-smart-switch/30860/
This one worked for me. Just don't update when you open it. Regardless of the pop up that says device initialization is no longer available, it is.
The device initialization function was removed in the latest version of Smart Switch because it was exploited too much for debranding.
Here's the official download link for the last version with device initialization function:
downloadcenter.samsung.com/content/SW/201706/20170601113339558/Smart_Switch_PC_Setup.exe
MrYoan said:
This one worked for me. Just don't update when you open it. Regardless of the pop up that says device initialization is no longer available, it is.
Click to expand...
Click to collapse
this help me a lot. thanks for the link:fingers-crossed:
Thanks for the link to the version with initialise!
I downloaded it and tried to do the initialisation process but after putting in my details it said "SM-G935FD" does not support initialising?
Do you know another way to initialise other than flashing a stock rom in ODIN as so far every rom I've tried gets stuck in boot loops.
Any help would be greatly appreciated! Thanks
Elektryx said:
Thanks for the link to the version with initialise!
I downloaded it and tried to do the initialisation process but after putting in my details it said "SM-G935FD" does not support initialising?
Do you know another way to initialise other than flashing a stock rom in ODIN as so far every rom I've tried gets stuck in boot loops.
Any help would be greatly appreciated! Thanks [/
It appears samsung has blocked it. Recent versions of smart switch automatically update to newest version and older versions installation always fails. I've tried many.
Click to expand...
Click to collapse
elv1503 said:
Elektryx said:
Thanks for the link to the version with initialise!
I downloaded it and tried to do the initialisation process but after putting in my details it said "SM-G935FD" does not support initialising?
Do you know another way to initialise other than flashing a stock rom in ODIN as so far every rom I've tried gets stuck in boot loops.
Any help would be greatly appreciated! Thanks [/
It appears samsung has blocked it. Recent versions of smart switch automatically update to newest version and older versions installation always fails. I've tried many.
Click to expand...
Click to collapse
Now I also get the error message, that my SM-G930F does not support initialising even though it worked before, so Samsung must have really blocked it. ODIN is the only way to do this now.
Click to expand...
Click to collapse
Samsung completely removed this feature... Cannot find fw on the server. This feature is over. The only way is ODIN or something paid. Restrictions, restrictions, restrictions everywhere......
This really sucks since Odin does not completely restore everything.
After having the bluetooth share problem come up on my phone due to max bluetooth connections (I managed to successfully root the phone and delete the entries to get it working again the last time on S5) I tried again to root my phone which was unsuccessful and messed it up. After trying a few times to get the correct ROM which is hard to get as theres nowhere official to get it from (that I know of) and downloading is slow. Now its in boot loop. Spent time for 3 days running to sort out this issue and now they've completely taken out the potential way to solve it. I guess on my next upgrade I'll look into other options, to think they haven't solved the bluetooth share issue after all this time I think is just crazy.
So why samsung is not focus on this issue and does not try to solve ....and in other side samsung kies say this device not supported and samsung smart switch says unsupported device so what is this ??both are made by samsung and this type of error faces many many users in the world and you can see a lots of video on you tube but there is no any appropriate answer
This move is absolutely against developers who try to use androids more than just what Samsung intends them to. Definitely not satisfied, it was my only way of recovery because my old backups don't work because of frequent updates.
Hey, got to this thread today, I'm just leaving my bit for other souls that come by... I had this same msg on my A9, tried the Smart Switch but no way... then I just started good and old Odin 3.13.3 and started the process: the device responded and accepted the flash !!!
FernandoK said:
Hey, got to this thread today, I'm just leaving my bit for other souls that come by... I had this same msg on my A9, tried the Smart Switch but no way... then I just started good and old Odin 3.13.3 and started the process: the device responded and accepted the flash !!!
Click to expand...
Click to collapse
Thanks!!!!, the same for an A50, SM-A505FN.
No device "initialization" tab on Smart Switch? > BUT ODIN STILL WORKS
Hello everyone;
I found this thread a few hours ago, when I was trying to fix my Samsung phone.
I just want to confirm that flashing stock ROM with Odin works even if you have the "“An error has occurred while updating the device software. Use the emergency recovery function in the Smartswitch PC Software”" screen.
Raisagvs said:
No device "initialization" tab on Smart Switch? > BUT ODIN STILL WORKS
Hello everyone;
I found this thread a few hours ago, when I was trying to fix my Samsung phone.
I just want to confirm that flashing stock ROM with Odin works even if you have the "“An error has occurred while updating the device software. Use the emergency recovery function in the Smartswitch PC Software”" screen.
Click to expand...
Click to collapse
Thanks,
this worked for me,
didn't know Odin still works
Raisagvs said:
No device "initialization" tab on Smart Switch? > BUT ODIN STILL WORKS
Hello everyone;
I found this thread a few hours ago, when I was trying to fix my Samsung phone.
I just want to confirm that flashing stock ROM with Odin works even if you have the "“An error has occurred while updating the device software. Use the emergency recovery function in the Smartswitch PC Software”" screen.
Click to expand...
Click to collapse
Can you teach me how to do that sir.
You can also try another Samsung application, if I remember correctly, many additional features have been added recently. https://www.huuq.net/samsung-flow-download-for-windows/