Hey I wanted to ask: I have recently on the Android phenomenon HD2 that when transferring files via USB, then the files are on the card is not wiped them Aachmachshir tried several types of Explorer, there is something idea what the problem?
someone?
Something? This new problem until yesterday the USB worked fine for me
If I understood even half of what you wrote I'd be more than glad than help. At the moment it makes no sense at all, I'm sorry.
whats Aachmachshir?
Related
So today I had to visit the local VZW store to get my SD Card replaced because it was corrupted somehow, and now whenever I mount the sd card on my pc it shows up as a CD Drive and I am unable to access it. I've tried mounting it on another pc and it works perfectly fine though which leads me to believe its something to do with my pc. I have uninstalled and reinstalled the usb drivers 3 times now and getting no where fast, anyone have an idea on what I can do?
Any help would be greatly appreciated!
BTW, running DJ05 w/ Geeknik 1.5.4 kernel with Super clean, but I dont think it has anything to do with it as even stock out of the box it wont detect it.
Buy a new computer
Sent from my SCH-I500 using Tapatalk
bendbowden said:
Buy a new computer
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
LOL!
Try using Windows System Restore to revert back to SEVERAL days before a known-good date. Otherwise you may need to reformat and move this to a Windows Support Forum. If you need professional assistance, i run a tech support company and could have someone walk you through the whole process via phone and internet for $50.
andrew at gtechsupport dot com
/andrew
No access to SD card
I'm having a similar problem with mine as well. I installed DJ05 and ever since I haven't been able to access my card. I'm not an expert but I don't think it's windows. The reason I say that is because I have tried it on two different pc's, one with XP and the other with Win 7. I have no problem connecting my wife's Droid to either machine. The only way I have been able to access my card is by turning on usb debugging plug in the usb cable and reboot the phone. This works one time, so each time I want to access the card I have to repeat the steps. I know this may not be exactly what you are looking for but maybe it will help in your efforts to find a solution. If anyone can help I would appreciate it as well. Thanks
I am willing to bet the OP is running windows XP. This, among many other problems, was apparent when using mass storage devices. Common reasons were system not up to date, or the more common, infected system. Many systems I work with have some malware causing the problem you describe.
After 43 minutes on the phone with Verizon they also couldn't figure out what my problem is. I recieved a new phone today and is well. Thanks for the help.
boot into Clock work recovery (red voodoo one)
Mount SD card
then reboot the phone while plugged in and it should be fine
I have been all over the internet, and I honestly can not find a solution to this problem anywhere. Like, literally, anywhere.
MY hd2 (And other people's) will not connect tot he computer via usb.
Zune software will just not acknowledge that my hd2 is plugged in.
I've tried everything, and my sd card is compatible.
Does anybody have an idea on how to get this fixed?
Using XBoxmod's newest rom
theflduck said:
I have been all over the internet, and I honestly can not find a solution to this problem anywhere. Like, literally, anywhere.
MY hd2 (And other people's) will not connect tot he computer via usb.
Zune software will just not acknowledge that my hd2 is plugged in.
I've tried everything, and my sd card is compatible.
Does anybody have an idea on how to get this fixed?
Using XBoxmod's newest rom
Click to expand...
Click to collapse
Try this
http://www.nirsoft.net/utils/usb_devices_view.html
go there and download a great wee program called USBDeview, run it as admin!
and basically delete anything that could be related to the phone
what that program does is gives you a list of all installed or previous installed USB devices, sometimes USB devices can "hangup" if the wrong driver or an conflict developes, ive used this before to fix a similar situation and it works great.
The reason i think this may be the problem is i had a similar problem in that my phone would only conect to zune when i use a particular USB port, i used a different one on the same HUB and all was well, so i cleared down all the crap using that program and all is now ok!
it will mean having to install any device you delete so i would suggest you disconnect all USB devices first then pull the drivers off for anything related to phones then reconnect anything you need one at a time.
ifd in doubt drop a list of all the devices on that program and ill go through them with you
Thanks so much. I just swiched back to android and i will install wp7 and try this again.
Do you have windows mobile device center 6.1 installed with active sync working?
Have you considered trying a different usb cable? It might be possible the cable is bad. Also maybe try connecting it to another computer to see if it recognizes it.
would be great for an update if you have had any luck on not, other folk are asking teh same question
Sorry i havent gotten back to you guys...
I tried the first post, did not work.
The cable is fine, I use it in android and to charge.
Other computer is not an option for me...
OTher usb ports were a no-go
I tried different roms and everything.
I'm beginning to just want to give up
*Edit: No, active sync isnt installed should i try it?
See if you have libusb installed and if so uninstall it and see what happens. I read somewhere on the net a few days ago that it solved peoples problems that couldn't connect to zune.
theflduck said:
Sorry i havent gotten back to you guys...
I tried the first post, did not work.
The cable is fine, I use it in android and to charge.
Other computer is not an option for me...
OTher usb ports were a no-go
I tried different roms and everything.
I'm beginning to just want to give up
*Edit: No, active sync isnt installed should i try it?
Click to expand...
Click to collapse
no active sync will just confuse things,
you didnt mess about with some of the HTC tools did you?
So you've uninstalled all the devices that teh USBDeview program showed you yeah? i had quite a few phone related devices, just get rid of them all, they will install again when you need them, have you tried using a different USB port, swap it with something else to be sure, try USBDeview again but this time also remove all of zune and everthing else youve installed for WP7, lets go back to the begining and se if there is something thats got messed up
Tanks. Will give it a try
I have a T-Mobile G1 that I had not used for a while. I decided to upgrade it to 2.2 and have been successful (Amon_RA v1.7, Cryogen 6). However, I had to do the upgrade using the SD card and WiFi because the USB is not working. I have tried to connect on both my old XP computer that used to work with the G1 and a couple of other computers using XP and Win7 with the same results.
I get USB Device Not Recognized. When I look at the Device Instance Id on the properties screen it shows USB\VID_0000&PID_0000\5&64DAA3C&0&1 and most other entries are unknown.
My Droid X works fine so I am fairly certain this must be a problem on the G1. I don't know how the G1 manages the USB connection so any help is appreciated.
I´m having the same problem but with my Vega tablet.
When I go to properties I get te VID_0000 and pID_0000 therefore y can´t install the drivers. I´ve looked everywhere but didn´t find any solution
Try another cable? Or try and see if this one works with another phone.
Same here with my htc magic, was working fine then just stopped. I've almost given up trying to get it to connect via usb, so it'd be great to see someone give a solution
Sometimes that happens to me, I try to reboot the computer as well as the phone. What really fixed it was having another rom installed.
Got a connection briefly today, then after a fresh install of laszlo's fantastic rom its gone again! Weird!
Sent from my HTC Magic using XDA App
hmmmm... try getting the 'mountusb' apk installed and see if that works...
ldrifta said:
hmmmm... try getting the 'mountusb' apk installed and see if that works...
Click to expand...
Click to collapse
thanks, please excuse my ignorance but where might I find a safe version of 'mountusb'?
hello
i have a problem
i have galaxy i9505 32gb with stock rom not rooted
and when i try to connect the phone to my pc to transfer files from the phone to pc and reverse
when i try to copy and paste nothing happened
not from the phone to the pc
and not from pc to the phone
and i talk about phone itself , without sdcard at all...
on the other hand
on another pc it working good
any one have an idea how can i solve it ?
thanks
benhouli said:
hello
i have a problem
i have galaxy i9505 32gb with stock rom not rooted
and when i try to connect the phone to my pc to transfer files from the phone to pc and reverse
when i try to copy and paste nothing happened
not from the phone to the pc
and not from pc to the phone
and i talk about phone itself , without sdcard at all...
on the other hand
on another pc it working good
any one have an idea how can i solve it ?
thanks
Click to expand...
Click to collapse
First reboot your PC. If this not works, try another USB port. Seems that your PC is the problem.
speedwayfan75 said:
First reboot your PC. If this not works, try another USB port. Seems that your PC is the problem.
Click to expand...
Click to collapse
thanks
i tried that already
and i know it something with the pc
because it work on other pc's...
but i don't know what
i tried to install older version of samsung usb drivers....
and the problematic pc was formated just recently
Hi. I bought a Redmi Note 7 Global 32GB/3GB yesterday and I have problem with transferring files
When I connect my phone to my PC (win 10) via it's USB cable, a menu appears with 3 options on the phone:
*No data transfer
*File transfer
*Transfer photos (PTP)
No matter which one I choose, In all 3 situations a partition appears in "This PC" which is empty and there is no file or folder in it. When I commit to copy a file to it, this error shows up:
Cannot copy item
This device has either stopped responding or has been disconnected
I've no problem with my honor 3c (android 4.4) and other phones on my PC, Also they have MTP option which connects so fast and let me transfer all file and folders.
What should I do?
It's kind of weird because now the phone is recognized and working well via USB 3 but USB 2 still has the above-mentioned problem.
I also have an old pc which I have linux lite, Chalet OS, and lubuntu on it. surprisingly file transfer works on linux lite and chalet OS via USB 1.1 - 2.0.
Can anyone use file transfer on windows via USB 2 port?
Hey man, I just bought the same phone today, 32/3gb and global, when I tried to connect it the first time that happened and I got scared.
I researched a bit and did a few things, deleted the drivers and the device in windows 10 device manager, reinstalled them and factory resetted my phone, and now is working well. I think the factory reset did the trick.
I hope this helps you. Cheers.
Psicovirus said:
Hey man, I just bought the same phone today, 32/3gb and global, when I tried to connect it the first time that happened and I got scared.
I researched a bit and did a few things, deleted the drivers and the device in windows 10 device manager, reinstalled them and factory resetted my phone, and now is working well. I think the factory reset did the trick.
I hope this helps you. Cheers.
Click to expand...
Click to collapse
Hey. Thanks for sharing your solution. So you've experienced the same problem. Did you test USB 3 before uninstalling drivers and resetting your phone?
Are you able to see your phone's content and transfer via USB 2?
aqua07 said:
Hey. Thanks for sharing your solution. So you've experienced the same problem. Did you test USB 3 before uninstalling drivers and resetting your phone?
Are you able to see your phone's content and transfer via USB 2?
Click to expand...
Click to collapse
Hello, sorry for the late response, I hope you found a solution early, but if not, I used both USB 2.0 and 3.0 (I think that's what you're referring to) and it did not work, after the reset and unistallation of drivers, both of them worked. I also have to say that I was using the cable issued in the box where the phone came, I'm still using it without trouble.