i posted this in another thread but no one replied so thought this one mite be more busy.
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile MDA Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes.
i have IPL 1.01 and SPL 1.04.
it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.
please help, at least let me know if Ive got a chance of repairing it
i believe if you can get it in to bootloader mode you can flash back to original rom and start over
i thought that to but when i tryed the t-mobile rom it said "connection error" and also said it should be connected through active sync. but then agen it mite of been the wrong t-mobile rom but im sure it was for the vario ii. do you have a link to the one i should try please?
i downloaded the official UK shiping rom from t-mobile site and upgrading now through bootloader. will report on what happens.....
nope, keep getting "device not responding" or "connection error". any other sugestions?
i looked on here http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick and it says that i have to "Flash any type2 radio in NBF format. If that doesn’t work, flash the radio using HERMflasher" please could someone tell me how to do this, if this is the solution to my problem or if there is another way around this. thanks.
please help someone i realy need to fix my phone
Cool down....
what's ur radio version?
Also have u read this? http://wiki.xda-developers.com/index.php?pagename=Hermes_SimUnlock - TRY THIS FIRST, before attempting anything else...
ok, i have tryed that "sim and cid unlocker" and i beleve that you have to connect with active-sync because when i tryed it when i was in boot loader it said that it was not connected but it was. i will get my radio version now.
EDIT: my radio version is: 0107
EDIT2: also, here are some other numbers (which i dont know what they mean but mite be needed) which apear on boot-up t-mobile splash screen, in red letters/numers, just before "no-gsm" flashes on:
M 05
S 04
B 06
D 1.21
If you can get into the Bootloader (Rainbow Screen) you should be okay (Not a Brick)
Go download a Radio Rom from the wiki.
Enter Bootloader first, then connect to PC. Then flash the Radio Rom.
Edit, Also Read: http://forum.xda -developers.com /showthread.php?t=296722
berdinkerdickle said:
If you can get into the Bootloader (Rainbow Screen) you should be okay (Not a Brick)
Go download a Radio Rom from the wiki.
Enter Bootloader first, then connect to PC. Then flash the Radio Rom.
Edit, Also Read: http://forum.xda -developers.com /showthread.php?t=296722
Click to expand...
Click to collapse
ok, ill try that, does it need to be a perticular radio because im not super CID? for some reason the link will not work.
oooooo, it seems to be workin!!!!!!!!! im at...16%. ill report what happens after update finished
yes!!! it worked!! thank you very very much for your help!!!
Hi guys!
I've got bricked HTC 4350 from one of our employees - seems it has drowned
But in some way it still works - it boot into bootloader (RGB screen), connects via usb, I can even flash it with official RUU. But after flashing ends it still boots into bootloader. Tryed to fix it using mtty but recieved message that task command is unknown.
Maybe you have any ideas how to unbrick it?
Or it is lost?
Thanks in advance!
Sorry for posting it here, please delete.
i have elf0100 white one
i upgrade it to oynex wm6.1 and when i turn on device show me itself the bootloader with 3 colors red blue and green
when i update to any update it ggoes to 2% and on my computer
say error 270 why ??? why ????
maybe idon't have CID unlocked but my phone only start up on bootloader
please help to upgrade to original update
iwant to mke my phone cid unlocked with boot loader
or with any program !!!!!!!!!!!
please help the man help me ; the man son help me
and i beholden any one help me
You Need The GoldCard!
i have elf0100 white one
i upgrade it to oynex wm6.1 and when i turn on device show me itself the bootloader with 3 colors red blue and green
when i update to any update it ggoes to 2% and on my computer
say error 270 why ??? why ????
maybe idon't have CID unlocked but my phone only start up on bootloader
please help to upgrade to original update
iwant to mke my phone cid unlocked with boot loader
or with any program !!!!!!!!!!!
please help the man help me ; the man son help me
and i beholden any one help me
If it loaded 2% and restarted and shows the tricolour. You ARE CID locked.
http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard
Use that link. Do your research.
If you cannot do the GoldCard by PC. Borrow a friends WM phone and make the gold card out of that.
for the USPL and IPL (which i believe you are asking for) can be found at
http://forum.xda-developers.com/showthread.php?t=408637
I just went easy on you and I don't know if they are going to keep this Thread Post up.
Just to answer everyone.
Do the research and do the work before asking silly questions. There is a million of these on XDA.
Have Fun Unbricking! Your phone is not dead!
I have work and found other ways to fix this problem
your way is very hard
I have update it to elf 10052 and work fine and very fast than the old original one
magawa said:
I have work and found other ways to fix this problem
your way is very hard
I have update it to elf 10052 and work fine and very fast than the old original one
Click to expand...
Click to collapse
That's good
Can you post your way, please
The gold card method is long, but proven successful for many people.
I agree with the GOLD CARD Method it have resolved many PDA to give life...
hi guys, i had done some mistake.
after i upgrade 2.1 to 2.2 official rom i found tat my hp was locked.
so i decide to root the phone
i follow the procedure in www.theunlockr.com
after i done at adb i wanna start to superboot.
when i at fast boot mode i plug in my usb cable and run a ‘install-superboot-windows.bat’ (2.1 build not same with me)
now my phone stuck at o2 logo and keep restart.
i reali no idea on this. can anyone help me ??? please!!!!!!!
i cannot in recovery mode.... any one can help ??? please
Hey Guys .. How u doin?
Ok now ..
i wanted 2 Flash The linuxDX kernel 2 my phone
Thru the Flashtool .. On my Pc
Anyway
Downloaded The file put it in place ..
Turned off the phone (( i FORGOT 2 TICK THE USB DEBUGGING )) !
So Turned the flasher On .. Clicked on Flash
i selected the LinuxDX on the Right there was Loader.sin And kernel.sin
i've chosen Both .. Anyway .. While Flashing .. Got an Error
Telling me 2 Tick the usb debugging .. I said no problem
Disconnected the phone
Then clicked the power button..
shakes .. Then nothin ..
Wtf???? Screen is Dead??
i waited .. so it goes on
Tried 2 call with another phone ..
its off.. Uhmm???????
..
Okay
No problem
Turned SEUS ( sony ericsson update service )
Started the repairing Process
The phone is connected FINE!!
software is downloaded .. Damn !!
Installing the software ..
Wait ..
It's Stuck .. ?
waited even more..
Still stuck :S ??
After a while i got this:
__________________________________________________ _______________
The installation Failed
Please disconnect the phone and make sure the battery is fully charged before trying. if the problem presists, please contact support.
For more information and help please See .. ETC !!
__________________________________________________ _______________
So now .. i go back to you guys..
Please??
Help my little Device
:/ !!!
did u unlock your bootloader before flashing the kernel?
dmcb123 said:
did u unlock your bootloader before flashing the kernel?
Click to expand...
Click to collapse
Yes i Did !!
I REALLY NEED HELP!
please follow on this Thread http://forum.xda-developers.com/showthread.php?t=1294021
Have u got the .ftf file for the 015 baseband?