htc diamond 2
when i check shaker with ringing in the incoming calls in the sounds area under
phone settings
the phone starts shaking and doesnt stop only untill i restart it.
any ideas?
stergiopa said:
htc diamond 2
when i check shaker with ringing in the incoming calls in the sounds area under
phone settings
the phone starts shaking and doesnt stop only untill i restart it.
any ideas?
Click to expand...
Click to collapse
Probably need to hard reset
i managed to make it work well with v vibrate and vibro cfg but after restarted these settings lost again and the problem exists.
using these progrmmes second time and nothing happens.
i think its a registry setting not a hard reset but i cant find it.
where or how can i change these vibtation settings in the registry?
i use win 6.5
thanx
Related
hey guys i did search and didn't find anything about this... my vibrate has stopped working!!! i installed the new s2u2 but i dont think that was the cause of it.... i can feel it vibrate when it switches from ring to vibrate but won't vibrate when a call comes... i uninstaller s2u2 and memmaid(my last 2 installed progs) but i am still having the same prob. tried soft resetting a few times.... please help!!!
Try doing a Hard reset. Also if you have dropped your phone it could just be a loose connection which is really easy to fix and if I recall. If this isnt your first HTC the vibrator should be the same as the wiza or apache or most of the more recently retired models.
When someone call's me, i cant pick up.
For a brief moment i can see who's calling,
but then i go's to the home screen
and i cannot answer the call, all though its still ringing.
Even slide open the phone or try to answer with the (green) hard button,
its no use.
What could be the problem?
and how can i fix it?
maybe a hard-reset can help you.
Go to start-> settings ->system and use clear storage function...
you will loose all contacts, sms's, etc....
you got the same problem as everyone else. the phone freezes. sometimes when phone calls come in ... others it just freezes at any time
i never had a freezing problem in my touch dual....
i'm using the niki project rom....
madds said:
maybe a hard-reset can help you.
Go to start-> settings ->system and use clear storage function...
you will loose all contacts, sms's, etc....
Click to expand...
Click to collapse
i propebly must do so.
but i will copy my pim first
Since I've installed S2U2 I have sometime the issue...
The phone is ringing but I can't pickup....
Oh, I've a good one too, a day, just when I press Off button to put my device in sleep mode someone try to reach me. My phone start to vibrate and never stop !! I had to remove the batterie to stop my device vibrating... weird...
neXus519 said:
Since I've installed S2U2 I have sometime the issue...
The phone is ringing but I can't pickup....
Oh, I've a good one too, a day, just when I press Off button to put my device in sleep mode someone try to reach me. My phone start to vibrate and never stop !! I had to remove the batterie to stop my device vibrating... weird...
Click to expand...
Click to collapse
could be some truth in it.
I've just un installed the S2U2
since it chopped to much memory (almost 6000 kb)
(i know this thanks to the nifty device Task manager v2.9)
And haven't got the problem since.
by the way does anyone know what the program 'gwes.exe' does?
it keeps growing its kb over time.
HELP HELP HELP
can anyone save me?
cause i am deaf(so SE x1 is a great choice but WM6.....) i want a phone vibration if recieve SMS message of incoming email.
i even setted it up to vibrate+ led lighting but it dont!!!
I tried all tweakprograms but they dont support it.
so i must regedit it i think, can anyone help me?!?!??!
you could do me a very very big favor if you can help me.
You have it under Settings->Sounds and notifications, and then the Notifications tab.
on8a said:
You have it under Settings->Sounds and notifications, and then the Notifications tab.
Click to expand...
Click to collapse
already did that, im not so stupid like that.
i just 5 minutes ago did hard reset. it works again. that was really strange, i didnt changed it so much.
LED and vibration by sms recieve works again.
but vibration is still too short, with mozart tone.
how i make vibration stronger and longer? i prefer about 7 sec.
Well, I didn't really think you where stupid, but WM isn't really logical sometimes, so splitting phone and notifications settings isn't always obvious.
Don't know if there are any tweak settings for the length of vibrations, but using phoneAlarm you could change how it vibrates.
http://www.pocketmax.net
tttyto said:
how i make vibration stronger and longer? i prefer about 7 sec.
Click to expand...
Click to collapse
have the audio alert last for 7 seconds. The only problem I have is I like the phone to pulse vibrate, but it seems like WM just does a full burst.
I'm having the same issues. ROM is the one that OliNex posted,
It's set in Sounds and Notifications, however it doesn't vibrate. Phone calls do.
I'v tried hard reset, I've tried soft reset, I've tried reflashing, but no success. Is there a registry setting somewhere?
Thanks
UKTamo
PS: My right hand volume control slider, refuses to go above 0 ...
I just got new HTC Diamond HD phone from Orange.
Whenever I make a call, the phone goes to standby and I have to turn it on again from the top.
This does not happen if the phone is kept straight, only happens when the phone is close to the ear (may be some sort of light sensor).
Please help.
I have tried a few setting in registry but it still same.
Hi
maybe u can try THIS
sure this is what you are looking for...
cheers
Try a hard reset. My phone was hanging during a call. After hard reset everything ok
PhaseIV said:
Try a hard reset. My phone was hanging during a call. After hard reset everything ok
Click to expand...
Click to collapse
That don't work, still goes off (light goes off), as soon as I dail a number and take to my ears. Phone is still connected and talking the actual handset goes off.
press the home button and the screen comes back on.
or pull the stylus out
thanks for your advise.
Any more ideas, keeps it awake without using stylo or press home page key.
Firstly, it's HTC TOUCH HD, not diamond hd.
Secondly, I think you are talking about protection during the call. If u'll turn it off, u would press some buttons or even hang with your ear
Sorry, It is HTC Touch HD.
I have cound the way to fix it.
This problems is caused due to the light sensor. This setting can be disabled.
I download HD tweak form http://montecristoff.webs.com/ and disabled the light sensor and it all works fine.
Thanks to all
So i have been having a lot of freezes with using the phone function. Most of them happens:
1) when the phone rings, i try to answer it using the slider and it freezes
2) when trying to make a call, it gives me the connected vibration and the call timer starts to count, but no voice come through. I will have to hang up and it freezes then.
Does anyone have the same issue or any suggested solutions?
tonysosw said:
So i have been having a lot of freezes with using the phone function. Most of them happens:
1) when the phone rings, i try to answer it using the slider and it freezes
2) when trying to make a call, it gives me the connected vibration and the call timer starts to count, but no voice come through. I will have to hang up and it freezes then.
Does anyone have the same issue or any suggested solutions?
Click to expand...
Click to collapse
try hard resetting your phone.
shak7i said:
try hard resetting your phone.
Click to expand...
Click to collapse
i have, also tried different roms/radios. None solved the issue.
tonysosw said:
1) when the phone rings, i try to answer it using the slider and it freezes
?
Click to expand...
Click to collapse
Disable the below setting.
Start > Settings > Menu > All Settings > Today > Items
The setting "Today timeout", at the bottom left hand corner, should not be selected/checked/ticked/enabled.