hi guys, what path do you need to follow so i can enter the APN settings for 3G. and when the 3G button changes to H, this means it's using HSDPA ?
Settings--->More--->Connections-->Connections.
Yes, "H" means HSDPA
didn't manage to find it.
But to use 3G you don't need it i guess.
So i got 3g enabled by the carrier, and my mobile is showing 3g. why isn't it working :S?
These settings are for using Internet, not for calls.
3G = Video Call enabled
i got 3g to work. however sometimes it uses GPRS. how do you disable it (No data doesn't actually work)
pluke100 said:
i got 3g to work. however sometimes it uses GPRS. how do you disable it (No data doesn't actually work)
Click to expand...
Click to collapse
Who's your carrier?
vodafone malta
pluke100 said:
vodafone malta
Click to expand...
Click to collapse
Sorry I am not familiar with their settings.
Related
is there a program to do that for windows mobile? so that the connection wont fall back to gprs or edge and always use 3G or hsdpa?
in sierra wireless aircard there is an option to set that.
i think there's an option in setting, personal, phone
go to band tab and change network type to WCDMA and change band to UMTS
it works but now phone call also using the 3G network always. how to set only if making data call?
coeternity said:
it works but now phone call also using the 3G network always. how to set only if making data call?
Click to expand...
Click to collapse
If you want to do this band change easyly, can use the tools on
this post, if you want the phone change band smartly, better you flash a good WM6.5 ROM.
Check more info on this thread.
i have a similar question but it is related to forcing the phone to switch from 3G to HSDPA mode when active data transfer occurs..
thanks..
hello,
after searching on "3G" in the forum, i seems that the problems are just the opposite to my question, they all want 3G to be turned off.
Now I want to connect to 3G (with the "G" icon on the staus bar).
My problem is that it always connect on "edge", with the "E" icon in status bar and when I want to make a video call, it always says that there is no connection to 3G so I can't make videocall.
Anyone knwos how to activate 3G?
I looked into the connections, but I don't want to mess in it without knowing what I do.
BTW I'm in Europe (Belgium).
Thanks
You fell into the same trap I did when I first got a Windows Mobile phone.
G means GPRS and is the lowest, simplest connection speed.
G = GPRS. "Normal" internet speed (9.6-14.4kbps)
E - Edge. "Enhanced" internet speed (normally 48kbps, but can be higher)
3G = 3G internet speed (128-384kbps). Also allows video calls.
H = HSDPA. "Mobile broadband" speed. (1.8Mbps, 3.6Mbps or 7.2Mbps depending on operator).
You'll want to go to:
Start > Settings > Connections > Advanced Network
Make sure that HSDPA/HSUPA is enabled
From then on, it depends on the signal in your area. If you find that you're having a problem getting and maintaining a 3G or H signal, you might need to get an updated SIM from your operator. I got a new SIM from O2-UK and it solved my connection problems immediately.
I see that HSDPA/HSUPA is enabled.
Could it have something to do with the settings in connections (instead of advanced network settings)?
I will also check with my provider (sim card)
Thanks for the reply
i cannot connect to the internet not using wifi. i do however h an H symbol next to my signal. i dont get why i have the hsdpa but cannot connect. i've tried anything i can think of.
*i can't turn data connection on in my comm manager, it automatically disconnects and says wap.cingular not working or gprs not working somthing like that.
*in the connection settings i pick media net wich is automatically picks att but still won't
*in settings/personal/phone i left if auto defualts for bands
*settings/connections/advance network i even tried to put it to hsda ONLY won't work
the only new lead im getting is this Zenith post saying he got new sim card so now it's working. that's all im getting at now. but im even skeptical about that
If you are not getting the 3G or H icon then you either have no coverage or an incompatible SIM.
If you can't connect to the internet you either have incorrect settings on your phone, or your network aren't allowing you on their APN.
Suggest in all cases phoning your network to get clarification.
artesea said:
If you are not getting the 3G or H icon then you either have no coverage or an incompatible SIM.
If you can't connect to the internet you either have incorrect settings on your phone, or your network aren't allowing you on their APN.
Suggest in all cases phoning your network to get clarification.
Click to expand...
Click to collapse
you wouldn't believe how i found out i had no internet. they say'd it was in the system but it was disabled in thier system. i put in my brothers sims and his work just fine. so i told them to look at whatever his plan is and they switch to what he had. anyways long story short i found out not my settings bc you just auto configure it connectin wizards, and wasn't sims card, it was stupid att. i was getting the H icon but not an H on my signal. anyways its all done now. thanks again guys
Type *#*#4636#*#*
Select Phone Information
Choose WCDMA only
this worked thanks!
kolyan said:
Type *#*#4636#*#*
Select Phone Information
Choose WCDMA only
Click to expand...
Click to collapse
What happens if no 3g is available? Does this apply to the uk as well?
at&t
two questions:
1. Will this enable 3g use on at&t's network?
2. Is it possible to revert?
1. No
2. Yes, just tap in the same code and switch it back.
You can switch back by using the same code.
If you do not have 3G while this is set to 3G only you will not have any data service, unless you switch it back.
It will not make 3G work on ATT (different frequency)
for those who weren't paying attention when they did this, the default setting is "WCDMA Preferred".
i dont understand why you wouldn't leave it as that????
neilosb said:
i dont understand why you wouldn't leave it as that????
Click to expand...
Click to collapse
Well, because if you are out of 3G coverage area, you don't have and data coverage any more, no web, no email, no syncs, no map. nothing.
Wow, Thank you for the trick, after I did the trick, I tested my 3G speed 4 times to make sure it, My 3G speed is increased greatly. Before this trick I only got about 480 kbit/s, now I tested 4 time I get average 780 kbit/s. That is cool!
Thank again.
Ok, Ive always had crappy 3g on my x10 but i put it down to signal issues, i thought i was in a poor 3g area.
I noticed whilst playing around in the settings that i could set the phone from WCDMA only, whereas before it was GSM with WCDMA preferred.
This sorted the problem out perfectly, great 3g performance even with crappy signal, the problem is that for some reason this means when there is no 3g signal it doesnt just fallback to GSM for voice.
From what i have read on the net it seems like changing to WCDMA only should -only- affect the data connection, not the phones voice connection.
Am i doing something wrong?
Is there a way that i can force the phone to use 3G only for data, but still use GSM for voice?
Thanks
in that case you should set the settings to like this 1. wireless controls 2. mobile network 3. network mode "WCDMA" then 4. network operator then search network tap the available current network what u r using do not select the automatically 5. done
after that turn off the phone remove the simcard for 5 sec. then turn on again wala u have 3 to 4 signals on ur 3g connection....
junexyz said:
in that case you should set the settings to like this 1. wireless controls 2. mobile network 3. network mode "WCDMA" then 4. network operator then search network tap the available current network what u r using do not select the automatically 5. done
after that turn off the phone remove the simcard for 5 sec. then turn on again wala u have 3 to 4 signals on ur 3g connection....
Click to expand...
Click to collapse
Thanks for the tip, it didnt work, but thanks
I have GSM/WCDMA selected but data unchecked and still works great
Anyone know what app can manage data and mms? I mean I don't want data connection but I still want mms enable.
Thanks
Gunawan, GN Mutimedia & X10i
gunawan-1 said:
Anyone know what app can manage data and mms? I mean I don't want data connection but I still want mms enable.
Thanks
Gunawan, GN Mutimedia & X10i
Click to expand...
Click to collapse
ouch, seriously doubt that's possible on the x10
maybe deleting the 3g APN or creating a blank one and just selecting the right mms one
Isn't MMS dependent on data?
iead1 said:
Isn't MMS dependent on data?
Click to expand...
Click to collapse
It is but you can create 2 APNs one for data and one for MMS and after enable/disable the data APN on case by case needs
At least i think it works on rogers because i saw separate settings for MMS only.
I am confused too. Hohoho... But as I remember, previous phones (such as X1,X2,p990) did have this options. Correct me if I am wrong. Because I always connect internet/browsing using wifi. Except mms.
Gunawan, GN Mutimedia & X10i
Hi all,
I'm struggling to get data connection over the 3G network, even though I've got a data plan and the settings seem to be on point.
I'm based in Dubai and I've got a Middle East tab (garbage as the firmware excludes the Android Market), so I've flashed a recent Euro firmware (JIP was the build if I recall)
When I go into network settings to choose 2G/3G/Auto, it shows me GSM and WCDMA as the choices. I'm pretty sure before the flash, it showed GSM and WCDMA. Is WCDMA the same as HSDPA?
The problem could be with the carrier, but I'm troubleshooting at the moment and this WCDMA is a bit confusing.
Any insights would be greatly appreciated. Thanks.
Have you checked your APN settings? Chances are that the Euro firmware doesn't have the APNs "pre-installed" for your carrier(s). The good news is that you can add them in manually if this is the case.
Regards,
Dave
woobanger said:
Hi all,
I'm struggling to get data connection over the 3G network, even though I've got a data plan and the settings seem to be on point.
Click to expand...
Click to collapse
If your display shows a 3G or H type signal, then your problem is a bad APN setting.
WCDMA is 3G and H on your display, if you have that then you're in good shape.
Search the net or the carriers website for the the correct setting, then create a new APN and data will instantly start to flow.
It was missing the apn setting. Justed typed it in manually and Im hooked up. Although i was bamboozled for a little while as the H didnt apear until i had turned off the wifi.
Thanks for all ur help guys.
Sent from my GT-P1000 using XDA App