So I was trying to connect a laptop that did not have wireless n to my evo, and well it could not see the wireless network created by the "Wireless Tether" app.
Any way to make it so older laptops and desktops with wireless cards can connect?
Do other devices see the wireless network?
I have a laptop with wireless N that sees the Evo's Wireless network and it can connect and run, but my other laptop when the first laptop is not connected can not even see the Evo network.
Did you modify your EVO's drivers to enable Wireless N? Because, by default, it only does B/G.
I ask because I have doubts that the problem is linked to the 802.11n standard. It's more likely just something weird with that specific laptop.
Good, good point, you're right I have my wires crossed in my mind. I didnt enable N, so I suppose its something odd with my laptop. Maybe its not getup to connect or find the type of network the Evo is creating.
Thank you.
If I recall correctly Wireless Tether creates an ad-hoc network, not an infrastructure network like a normal wireless AP would create. Perhaps you need to change some kind of setting to show ad-hoc networks?
Exactly what I was thinking. Thanks again Aragorn182.
Related
Hello,
Long time listner....first time poster.
I've been using WMWIFI for home internet access now for a while. My laptop and desktop have no problems finding my mogul as an access point.
I just purchased a Playstation3 (mostly for the bluray). It has a wireless card built in to access some of Sony's online stuff.
My problem is that the PS3 cannot find my mogul as an access point. Any guesses? I've searched to earth's end, however, it doesn't seem there are many people trying to do what I am...and unfortunately I can't exactly call sprint and ask them.
Thanks for any help.
Found the answer...the PS3 will not connect to an Ad-hoc network...
Reported to not work
Nintendo DS
Nintendo Wii
PlayStation Portable
Unable to connect to a device providing internet using ad-hoc mode.
Do ya'll think that there is a way around this?
I don't have any other internet access (except for the mogul) but would like to get the PS3 connected.
i'm sure theres a way to rebroadcast from the PC
hymanr said:
Found the answer...the PS3 will not connect to an Ad-hoc network...
Reported to not work
Nintendo DS
Nintendo Wii
PlayStation Portable
Unable to connect to a device providing internet using ad-hoc mode.
Do ya'll think that there is a way around this?
I don't have any other internet access (except for the mogul) but would like to get the PS3 connected.
Click to expand...
Click to collapse
The psp can connect to an Ad-Hoc network (at least the last time I tried), don't know about the others. I just know under network settings on the psp you have to change it to ad-hoc mode.
Yes it can be done. you need a laptop or a desktop to act as a middle man.
If your desktop or laptop has a wireless / wired port, simply share the internet conenction from your phone to your PC.
plug in a wire from the ps3 to the PC
highlight the wireless icon, and the wired icon in your network manager and right click and hit bridge network connections.
it will work after that.
sfld said:
Yes it can be done. you need a laptop or a desktop to act as a middle man.
If your desktop or laptop has a wireless / wired port, simply share the internet conenction from your phone to your PC.
plug in a wire from the ps3 to the PC
highlight the wireless icon, and the wired icon in your network manager and right click and hit bridge network connections.
it will work after that.
Click to expand...
Click to collapse
If you have a wireless router,that should make it all work. Set your mogul to connect to the wireless router and set the router to be 192.168.0.2 instead of its default. Now setup your devices with a static IP,on the same subnet and set the default gateway to be 192.168.0.1 (your moguls ip). In the earlier versions,this just works as is.
In the latest version,you will need to set some other settings on the phone as well. Go into your phones wifi settings and set the wifi adapter to 192.168.0.1 (earlier versions of wmwifirouter set this as the default,but the newer one is more flexible,so you need to specify this) Now,connect your wifi to your routers network. Next launch wmwifirouter. Clear the check mark next to dhcp allocator and adhoc netoworking. Network block should be set to the 192.168.0.x subnet. The router wont actually be used as a router,just as a network access point. Your mogul is actually the router. The clients are setup as before,with static IPs with a default gateway of 192.168.0.1.
This is how I connect my computer to the internet. I expect that it should work with any device that can be set with a static IP.
Thank you pflatlyne...
I have a wireless router but have not been using it as my computers can access the mogul directly. I will try your set up tonight.
Hopefully I can follow your instructions well enough to get it set up.
Thank you!!
WMwifiRouter and Xbox360
This did work with my 360 and WMwifiRouter. Had to config for my settings but it works!!! Yippee
EDIT
In case anyone asks, I did'nt need anything except my phone and 360. No router, or computer. Just fired up my wifi and entered the settings in my 360. It didn't see it, but it allowed me to edit my settings. I don't know about the PS3, wouldnt mind having one though. :..(
Hmmm....I still can't get it to work..
I'm not the most literate when it comes to how to do this.
Any chance of a detailed walkthrough on what to connect to what?
I have a desktop, an Actiontec wireless router, a wireless adapter for my desktop, mogul, and playstation....
Yes a step by step would be great. I have been trying to get the wireless router idea to work with no luck.
Mine works
What I did was what the other guy said with bridging the connection. once you connect your mogul to the computer and get online through the pc, connect an ethernet cable from your pc to the wifi routers main plug.
go to network connections
highlight your internet connection for the mogul and the one for the ethernet ( on my pc it is defaulted as internet connection 11 for the mogul and 12 for my NIC card) right click the highlighted connections and click bridge. connect the ps3 to one of the available hub slots and your ps3 should connect n/p.
IF YOU DON'T HAVE A ROUTER...
you must purchase a cross over cable to get an internet connection directly from your pc to your ps3. the method is the exact same as above except no router.
Can the G1 detect and connect to Ad Hoc WiFi networks? My router is fried, and there are no open networks nearby with strong signal.
I made one under Linux and another one under Vista, the device doesn't see both and entering it manually does nothing.
I suppose it can't see AdHoc networks.
MoridinBG said:
Can the G1 detect and connect to Ad Hoc WiFi networks? My router is fried, and there are no open networks nearby with strong signal.
I made one under Linux and another one under Vista, the device doesn't see both and entering it manually does nothing.
I suppose it can't see AdHoc networks.
Click to expand...
Click to collapse
I believe that it CAN detect ad-hoc networks.
I setup an ad-hoc connection from my pc, and it detected it, but there was no network activity. I probably did something wrong, but, I am not sure why it didn't work.
MoridinBG said:
Can the G1 detect and connect to Ad Hoc WiFi networks? My router is fried, and there are no open networks nearby with strong signal.
I made one under Linux and another one under Vista, the device doesn't see both and entering it manually does nothing.
I suppose it can't see AdHoc networks.
Click to expand...
Click to collapse
I use USB Wi-fi adapter for wireless connection and I need to say that G1 don't allow to use adhoc connection, it need only wifi router.
Some month before I see the answer from T-Mobile support that G1 can't use adhoc connection.
It's sad, bcoz my last WM phone (Tytn) has no problems with adhoc connection...
Alas I feel your pain. I use adhoc for my iPhone frequently because at school I can only jack into an ethernet because the WiFi is protected. But my G1 can't so I am doomed to EDGE when i'm in my mom's classroom after school
MoridinBG said:
Can the G1 detect and connect to Ad Hoc WiFi networks? My router is fried, and there are no open networks nearby with strong signal.
I made one under Linux and another one under Vista, the device doesn't see both and entering it manually does nothing.
I suppose it can't see AdHoc networks.
Click to expand...
Click to collapse
is this a software issue that can be fixed or is it a hardware issue?
Software. In fact the phone can MAKE ad-hoc networks that other devices and computers can see and join. That's how WiFi tethering works. You can start a wifi tethering app and use the ad hoc connection it creates, without using the cellular tethering at all, or you can examine the tethering scripts and extract just the part concerning the wifi.
I experimented a bit, and was able to change almost everything needed to share Internet from the PC to the phone, except default gateway on the phone...
Noone wants to help
I guess everyone who has an unlimited data plan thinks "Haha stupid stone age idiots want adhoc HAHAHA" . Damn it. I live in a stupid country and I don't have an unlimited data plan. I want to connect to my laptop's wi fi. Please anyone help!!!
Here's the solution
http://hydtech.wordpress.com/2009/09/14/how-to-connect-to-ad-hoc-networks-using-tmobile-g1-android/
The important part is to tweak the windows part - you need to tell the broadband/adsl internet connection to share itself to the Private wireless network (the network manging your Wireless adapter). If you are having trouble with the windows part (say you connect and have full bars on the phone but no access to web) google ICS (internet connection sharing) in windows and you should get it working.
OK I have simple newbie question, is it possible to tether the Nook Color to a PC and use pc's network? Reason behind this is my wireless router is half way out, wired works but wireless doesn't (All wireless is out) and Att won't be out till tomorrow to fix. So I was thinking if it's possible to tether like you do on a phone but with a PC and use PC's network. I can tether it my phone just fine, but at the house, we have very low signal, so it's really not an option. Thanks
Derek
It sounds like your PC is connected to the network with cat5, ethernet cable right since the wireless is wonkey? Provided your PC has a wireless network card you should be able togo into the network setting and turn your PC into a wireless adhoc network that you can attach the nook to.
Unfortunately the fact you need to rely on your service provider to get a wireless network working in your household means you probably won't be able to do that without some help. This is not a dig, it's just an observation. Everyone has different skills at different things.
But can't you just go out and buy a cheap wireless router and connect it to your service providers router with an ethernet cable, just like you are doing with your PC. The instructions are pretty simply for making it password protected and all.
I just realized my post might not be all that helpful, but to answer your question the answer is yes if your PC has a wireless card.
If you don't know how to make an ad hoc network, just search "how to" on whatever OS you're running. But anyways I had the idea to get my phone, ps3,and laptop on my high speed internet connection without a router. First thought was a reverse USB tether and then broadcast it to ps3....but it seems impossible on my cm7 gingerbread vibrant.(btw, no one bothered answering my post for help). So technically you don't even need to create an ad hoc network. I allowed sharing from my wired local network connection to my wireless connection on the laptop. Then enabled the wifi hotspot ability on my phone, did custom connection and picked up "AndroidAP" on my ps3 wireless connection, made sure that it aquired an IP but didn't care about internet just yet. I then connected the laptop to the "AndroidAP" access point under available wireless networks. Waited a minute and I see my computer as a media server on my ps3. Open the browser on the ps3 and voila! Online connection tested at 6.4 mbps download and a 2.8 Mbps upload. The phone acted as a wireless bridge but isn't drawing any data from it because the hotspot ability is for sharing....so now I need to figure out how to tap into the love on the phone.
If you haven't figured it out, you can get everything online in your house without buying a wireless router. This is a homemade access point that's super easy!
So I can use my standard USB cable and tether to the laptop and have net connection on lappy. Same with desktop. USB tether works just the same as wifi tether. What about getting a micro USB to RJ45 (ethernet) cable and tethering to the internet in jack on my router. Would that put the net signal on the router like a modem would?
Chopstix9 said:
So I can use my standard USB cable and tether to the laptop and have net connection on lappy. Same with desktop. USB tether works just the same as wifi tether. What about getting a micro USB to RJ45 (ethernet) cable and tethering to the internet in jack on my router. Would that put the net signal on the router like a modem would?
Click to expand...
Click to collapse
Or you could get a wireless adapter for your Desktop. That's what I did. Now I can stream Amazon Prime on my Xbox 360, and PC game at the same time.This is what I have and works like a charm.
Good luck.
Oh my desktop is already wireless enabled, that's not an issue... Been running the house off the phones for a couple years... Just gave up a little bit when I got rid of cable interet. Whole house networking to other computers in the house, had to plug the wireless printer back into the desktop, it's no longer a network printer, etc.... was just toying with the idea and wondering if it would work is all.
Actually, in looking at the micro usb - rj45 adapters, I don't think it will work. Those are actually ethernet adapters, like adding a network card to a slot on a pc. Made for taking a net signal FROM a network, not sending one TO it.
Correct me if I'm wrong, but can't you just get a compatible wireless dongle (Something you would use for sniffing/injecting packets) and use it as an access point so you can broadcast the signal throughout the house?
Another thing you can do is pick up a router that you can install Tomato or DD-WRT on and use it as a wireless client bridge. It would connect to your phone, and again, broadcast that signal through the house.
Chopstix9 said:
So I can use my standard USB cable and tether to the laptop and have net connection on lappy. Same with desktop. USB tether works just the same as wifi tether. What about getting a micro USB to RJ45 (ethernet) cable and tethering to the internet in jack on my router. Would that put the net signal on the router like a modem would?
Click to expand...
Click to collapse
DJNads said:
Another thing you can do is pick up a router that you can install Tomato or DD-WRT on and use it as a wireless client bridge. It would connect to your phone, and again, broadcast that signal through the house.
Click to expand...
Click to collapse
Correct. Assuming the phone would even operate in this manner (I've never tried but sounds like a great idea!), you'd need a router that is capable of operating in bridged mode/wireless bridge/access point mode (may be labeled as either of them). You'd then have to configure the router to said bridged mode. An easier route (and possibly more expensive) would be to purchase just an access point.
MrHyde03 said:
Correct. Assuming the phone would even operate in this manner (I've never tried but sounds like a great idea!), you'd need a router that is capable of operating in bridged mode/wireless bridge/access point mode (may be labeled as either of them). You'd then have to configure the router to said bridged mode. An easier route (and possibly more expensive) would be to purchase just an access point.
Click to expand...
Click to collapse
I may have an old WAP in my junk closet. A router that can bridge may work but first thing I think I would need is a router or WAP that has a USB connection on it.... I'm looking to plug the phone into the router to provide the internet signal instead of a cable/dsl modem, creating a typical LAN ... I can still use the LAN in-house sans the net connection. Just a pain to disconnect from one network (phone hotspot) and connect to another (netless LAN) for file transfers network printing etc ...
Chopstix9 said:
I may have an old WAP in my junk closet. A router that can bridge may work but first thing I think I would need is a router or WAP that has a USB connection on it.... I'm looking to plug the phone into the router to provide the internet signal instead of a cable/dsl modem, creating a typical LAN ... I can still use the LAN in-house sans the net connection. Just a pain to disconnect from one network (phone hotspot) and connect to another (netless LAN) for file transfers network printing etc ...
Click to expand...
Click to collapse
You shouldn't need to physically connect your phone to the router at all. Depending on what router you get, it should be able to pick up the wireless signal from your phone's hotspot and rebroadcast it as its own network.
Edit: And honestly, I'm not sure connecting the phone via usb to the router would even share the connection. That router doesn't have the drivers needed for that to work.
To the OP, off topic question but what did you have to do to activate wi fi tether? your sig, tells me that your on stock and can still do it, yes? thanks!
Side note, it's been awhile but when I moved into my apartment I had no internet for a few days.
I did the USB wired tether to a laptop, then the laptop I think I enabled ICS/internet connection sharing and then connected with rj45 to a router, and it shared that as the WAN connection.
motrinHD said:
To the OP, off topic question but what did you have to do to activate wi fi tether? your sig, tells me that your on stock and can still do it, yes? thanks!
Click to expand...
Click to collapse
What part of my sig tells you I am on stock?
I've done both these things. I've taken my cell and flashed a router with dd-wrt and set it up as a repeater bridge but that means that only the computers near that router gets internet, unless your house is wired for ethernet (or using wireless). My current setup is having the phone tethered to a computer running Zentyal linux. This is a cool distro that can replace a 2008 Small business server in a work environment but it does the trick for my router at home. I had it running on an old P4 and recently graduated to a Zotac Zbox Mini ID41 which is tucked away behind my TV. I set up the computer to hand out dhcp and be the router and gateway. When i plug in my cell in tethering mode, zentyal recognizes it and i set that USB device as external WAN. It usually takes some getting used to and about a minute to normalize after the phone is unplugged and taken on the road. This has worked for me so far but when i'm at work, no internet at home. I'm currently attempting to talk my workplace into letting me subsidize a Verizon Jetpack i can leave home which will do the same job.
As a side note, i live in rural WI and we only have Satellite internet as a choice, which really stinks as both carriers have a bandwidth cap which we were constantly hitting two weeks into the billing cycle. They then throttle you down to less than a meg until your billing cycle renews.
We RV all summer most years and I use WiFiRanger gear to network our 5th wheel. That way we can grab a WiFi AP if one is available and the credentials are known or I HotSpot my phone and the Router grabs the phone's WiFi AP and we are good to go.
If you are stationary and only intend to use the phone's HotSpot as a WiFi AP then WiFiRanger's GO2 should do the trick. They are currently working on a firmware upgrade that will allow some great bandwidth monitoring and device usage controls. Their price is comparable to most full featured routers being offered but not cheap.
I am a satisfied user and Beta tester of their equipment, not an employee or representative. We use several of their offerings to maximize our capabilities on the road.