No trace of anything GPS in wm6 - P3300, MDA Compact III upgrading etc.

I have a p3300 obviously that i bought with wm6 already on it. The problem is, there is no trace of gps in the registry and in the settings there is only an option for external gps, nothing more. Is there a way to install drivers for the gps only? I'm not sure i'm comfortable flashing seeing as there are so many roms out there for different carriers.. I'm on fido in canada btw

victorhuge said:
I have a p3300 obviously that i bought with wm6 already on it. The problem is, there is no trace of gps in the registry and in the settings there is only an option for external gps, nothing more. Is there a way to install drivers for the gps only? I'm not sure i'm comfortable flashing seeing as there are so many roms out there for different carriers.. I'm on fido in canada btw
Click to expand...
Click to collapse
Hi
If you mean GPS program, you could always install Navigon.
http://www.navigon.com/portal/sites.html
There is a 30 days free testversion of their Navigator7.
Just remember to change COM-port from 4 to 7 on either the device or in the program.

Oh my mistake, what I meant was that I can not get any satellites with any program. I flashed it yesterday to WM6.1 (Andrew82) but aside from some slight improvements, it made no difference to the function of the gps. I cannot get a fix from any software that i've tried, it's as if the GPS isn't there (although gps test 1.04 says that the gps is starting up, nothing happens). Are there some drivers or something that I can install?
I tried setting com ports to 7/none/4800/auto However, I though it was supposed to be 4/none/4800/auto in the settings, no?
Also if it helps, I only have a setting for external gps, there is nothing with just GPS there in system...
I've tried all kinds of resets, factory rom, but its the same story im afraid... Any ideas HIGHLY appreciated
Also, the HTC gps tool says "Fix not available"

victorhuge said:
I tried setting com ports to 7/none/4800/auto However, I though it was supposed to be 4/none/4800/auto in the settings, no?
Click to expand...
Click to collapse
It is only the NAVIGON software that uses COM7.
Others I have seen, use COM4. - (So unless you change to Navigon, use COM4.)
victorhuge said:
I've tried all kinds of resets, factory rom, but its the same story im afraid... Any ideas HIGHLY appreciated
Click to expand...
Click to collapse
I also use AndreW82, but it has no GPS software.
So I use Tomtom Navigator 7
If you use other GPS-software, - have you checked that the program asks for COM4?
Probably som .dat file or something that needs to be altered to COM4.
I had the same problem when I tried Navigon.
First it reported "no GPS found" But after I altered one of the .dat files to COM4, it found the GPS.
(But it took a veeeeeeeeery long time before it found the first sattelites.)
If you want to try, I have attached a test-version of Tomtom. (tomtom7.cab below)
According to Tomtom, NO such testversion exists.
But if you try it, you will at least see if your GPS is working.
(I don't know if it has any maps for Canadian Cities, but at least it should let you see if it finds any sattelites.)
1. Install the cab.
2. Start Tomtom Navigator
3. If settings does not come up automatically, just tap somewhere on the screen.
4. Select, Change preferences
5. Tap blue arrow 5 times
6. Tap Config GPS
And wait for it to find sattelites. Be patient, first time it takes a little longer time.

Related

my ameo's gps cant fix satellites

My ameo can fix satellites the first day i got in chicago, but from the second day, it no longer fix. it has been so for 1 week.
i use "quick gps" but the gps still doesn't work. then I changed the server where "packedEphemeris.ee" downloaded from by editing the registry, nothing changed. I've used igo,gps viewer,gps tuner etc., the satellite can be displayed around the picture of earth but they are all red and never become blue or green. ive tried hard reset but nothing changed..
I wonder what's wrong with my ameo? Is it possible that my ameo's gps module is broken? or it's just a software issue?
coolish said:
My ameo can fix satellites the first day i got in chicago, but from the second day, it no longer fix. it has been so for 1 week.
i use "quick gps" but the gps still doesn't work. then I changed the server where "packedEphemeris.ee" downloaded from by editing the registry, nothing changed. I've used igo,gps viewer,gps tuner etc., the satellite can be displayed around the picture of earth but they are all red and never become blue or green. ive tried hard reset but nothing changed..
I wonder what's wrong with my ameo? Is it possible that my ameo's gps module is broken? or it's just a software issue?
Click to expand...
Click to collapse
I have read here somewhere that the GPS Now causes problems with the GPS and caused some lock-ups requiring a soft reset. See if you can find the thread....(hint....search...LOL ) that discusses it. I had also heard that the Ameo had a GPS problem.....that thread is here too.....good luck.
Hope this helps...........Later
hdbueller said:
I have read here somewhere that the GPS Now causes problems with the GPS and caused some lock-ups requiring a soft reset. See if you can find the thread....(hint....search...LOL ) that discusses it. I had also heard that the Ameo had a GPS problem.....that thread is here too.....good luck.
Hope this helps...........Later
Click to expand...
Click to collapse
i have done soft reset many times and hard reset for several times,nothing changed..i have tried setting the gps program port to com4 or com5 and just like what i did when the gps works fine.The applications can connect to the port and find the gps but it just cant fix a usable signal..
here is the screenshot
please help..
Try GPSView
I find that the best program for getting a lock, it normally works in a few seconds. Also, make sure when you turn it on you are in a WIDE open area. You need a good view of the sky in all directions to get initial lock. Wait until its happily locked onto 4 or 5 sats before fiddling or moving.
i have used gps viewer, and i do test it outdoor in open air, but it just cant get fix in hours.
here is the screenshot while using gps view
Not sure if it will work with your software, but I find that my Ameo is far happier using com1 for the GPS port - I believe this is the software port and com4 is hardware. With com1 I can use multiple gps apps at the same time, e.g. Tomtom and Reperion. If the device has not been used for a while, it can sometimes take a few minutes to get a lock, but no longer than 3-4mins. What I generally do is set one of the GPS apps running as I'm getting my keys coat on e.t.c., then by the time I've installed the Ameo in the car and done my 'preflight checks', its got a fix and I can go.
But deffo try com1 if you have that option.
cant download quick gps
hi can i get some help. i got my new ameo but cant seem to get the gps working. when i tap quickgps all that comes up is download and nothing happens. what might be the reason. do i need to get another gps programme installed?
Yes.
QuickGPS is only for downloading sat data, not for actual GPS tracking use!
GoogleMaps is free and quite good. Microsoft Live search same.
Look for GPSView for ppc as well...
Have fun.
how do you make googlemap work? i mean the track function.
Turn off the MS software GPS management, then get the ABSOLUTE LATEST googlemaps mobile.
I think you set the com port manualy in google, com4 or com5 9600
Its best to use the free GPSView to test out the com settings first to make sure you get the right ones. When you get the right port you will SEE the gps data appear in the text box proving its working. This program gets locks quicker too.
When youve got a lock with that, quit it, then run google and use the same com settings.
wilben said:
hi can i get some help. i got my new ameo but cant seem to get the gps working. when i tap quickgps all that comes up is download and nothing happens. what might be the reason. do i need to get another gps programme installed?
Click to expand...
Click to collapse
i seem to have a peculiar issue as well. i have had my Ameo for 3 months now and GPS download (to get a fix) my TOMTOM 6 have both worked fine. now i try to download the gps data through quickgps, it says "connecting" and after a while returns an error message " connection failed, please try again later" can anyone help please?

how do you guys use gps?

hi folks,
how do you folks use gps? I have a p3600, already flashed w/ akeo wm6.1 build 19965; i read somewhere that if it's at version wm 6.1 that gps should already been enabled. anyway, I installed iGuidance version 3.0 and it couldn't find the gps. just thought how you folks use the gps.
thanks!
You should flash your PDA also with latest radio 1.56.70.11. Then you will have good working GPS
Make sure you've got it set to use com9
no luck
crankshaft said:
Make sure you've got it set to use com9
Click to expand...
Click to collapse
i upgraded radio to 1.50, and used com port 9 but still no luck.
it still thinks i'm at another location but i can't get it to figure out that I'm not there anymore.
i recall, as I had another phone to play w/ that, i had to do something similar to that 'quick gps' download, then another one that actually kind of tells gps(?) where i'm at. is there something similar on the trinity? if not, what else can I do? what do you guys use? or the process that you go through.
thanks alot!
Also check the baud rate. Look in settings > system > external gps
mines set to com9 baud rate 115200
Make sure your GPS app is set to the same.
My radio rom is 1.56.70.11 but you should be fine with 1.50 & you're right, wm6.1 does have GPS enabled.
I'm using TomTom 7. It can can up to 10 minutes before it gets a signal. I have tried QuickGPS but am not convinced it makes any difference. Make sure you're outside too.
still no luck.
crankshaft said:
Also check the baud rate. Look in settings > system > external gps
mines set to com9 baud rate 115200
Make sure your GPS app is set to the same.
My radio rom is 1.56.70.11 but you should be fine with 1.50 & you're right, wm6.1 does have GPS enabled.
I'm using TomTom 7. It can can up to 10 minutes before it gets a signal. I have tried QuickGPS but am not convinced it makes any difference. Make sure you're outside too.
Click to expand...
Click to collapse
so you just set these settings - com port, baud rate w/ in the 'external gps' settings, and in tomtom 7, it just works? you don't have to do anything else?
oh i would just love to get this working. thanks!
what rom are you using?
btw, what rom are you using? the default one? or a customized one?
I googled around and came across htc's site where there's a rom download that'll enable gps (and get free tomtom 6) but when I input my serial number it says it's not suitable for my device, did anyone try this?
http://www.htc.com/europe/SupportDownload.aspx?p_id=3&cat=2&dl_id=111
that's right, stick em in and it's all go! I'm currently using g77 wm6.1 rom, the current one in his post in the wm6 forum but it's worked with every rom I've used, from wm5 up. Have you tried any other programs that can use gps? There's a few free ones aout, I know Wififofum can use it.
That's the original wm5 rom, it's old, not sure why it's got a recent date. Think there was a post in the wm6 forum about it the other day.
How long are you waiting for it to get a fix? I've never used iGuidance before, does it say anything like waiting for fix or saterlites?
crankshaft said:
that's right, stick em in and it's all go! I'm currently using g77 wm6.1 rom, the current one in his post in the wm6 forum but it's worked with every rom I've used, from wm5 up. Have you tried any other programs that can use gps? There's a few free ones aout, I know Wififofum can use it.
That's the original wm5 rom, it's old, not sure why it's got a recent date. Think there was a post in the wm6 forum about it the other day.
How long are you waiting for it to get a fix? I've never used iGuidance before, does it say anything like waiting for fix or saterlites?
Click to expand...
Click to collapse
I downloaded Wififofum and on the bottom it shows "GPS: NotFix (0)", i'm using com port 9, i think this is the correct one as if I change to another com port, it just keeps saying "re-connecting". My radio version is pretty recent - 1.4.6 or so (same as yours actually). could the GPS be defective?
if I use iGuidance, it just says 'waiting for gps signal'
for your first GPS fix, it could take a very long time, even more if you're moving.
When you got some spare time, put your trinity close to a window, start up your GPS app, and leave it there for a while. Trinity has no aGPS, and I'm not sure if there's any software that can get it, and pass the data to any GPS app running.
If you change GPS configs on iGuidance, does the message 'waiting for gps signal' change to something else like "no GPS device" or so?
it works!!! yeh!!
hey guys, thanks so much for helping me out!
It works. I guess all this time, even though I put the phone right by my window here at the office it still wasn't good enough, I had to get out of my office and sit on some benches and after a couple of minutes iGuidance was able to know and show me exactly where I was.
the bottom line was I wanted to make sure that the gps wasn't defective....
thanks so much again for all you guys' help!
Aloha from Hawaii!

GPS cant be found by TT7

I have tried it several ways but I cant get TT7 to find my internal GPS antenna.
I cant find alot about this problem on google either.
The google maps installed on it finds the GPS and uses it, but TT7 and other nav software cant find it.
Anyone has any suggestions?
Perhaps you will need a 3rd party program to re-route the GPS information from the chip to TT7. GPS Gate does this. I haven't used TT7 on the HD just yet, so I can't give you any other information, sorry.
ballistykx said:
Perhaps you will need a 3rd party program to re-route the GPS information from the chip to TT7. GPS Gate does this. I haven't used TT7 on the HD just yet, so I can't give you any other information, sorry.
Click to expand...
Click to collapse
I think you are right. I had this problem too. The fix was to load NoniGPS and go to the advanced setup page, choose Com4 and your preferred data rate, save it. Switch to the home screen without closing the app then load TT7, it should lock on the satellites now. That worked for me and I haven't had the issue since. If you change TomTom versions again, the problem can come back.
Matterhorn said:
I think you are right. I had this problem too. The fix was to load NoniGPS and go to the advanced setup page, choose Com4 and your preferred data rate, save it. Switch to the home screen without closing the app then load TT7, it should lock on the satellites now. That worked for me and I haven't had the issue since. If you change TomTom versions again, the problem can come back.
Click to expand...
Click to collapse
TTN7 shouldnt need this. Have you gone in an checked the configuration within tomtom. Using the setting "internal gps" works fine, however you could also manually configure to com4 and 9600 baud.
have you at any point played around with "external gps" settings on the device?
to be honest yes I have been playing around with "external GPS", and later on I saw a warning on this forum that could mess up your GPS settings.
I will try the other advises and if not a hard reset and start over and see how it turns out.
But I thank you all for the info, I keep you posted on the progress
Gogem said:
to be honest yes I have been playing around with "external GPS", and later on I saw a warning on this forum that could mess up your GPS settings.
I will try the other advises and if not a hard reset and start over and see how it turns out.
But I thank you all for the info, I keep you posted on the progress
Click to expand...
Click to collapse
Did you try doing a reset with the red button behind the cover instead of long press on button? Too easy I know, just checking.
Oke I fixed it, and yes I did it with a Hard Reset. It seems that "External GPS" screws up all your settings, havent touched it since the reset installed TT7 again and it works perfect.
So to all new users of Touch HD, DO NOT USE "EXTERNAL GPS"!!!
If you did and TT7 cant find your GPS device, use the "Hard Reset" to regain control over your GPS device.

GPS X9601

GPS problems
Ok so I have a North American GSM x9501...
Never used the GPS (Telenav isn't available to Canadian residense). This device is unlocked and NOT purchased from Rogers...
Downloaded Google maps, tried to use GPS and it wouldn't work. Set the settings manually Com4 57600 baud... It says searching for satalites, and has some HUGE number (54357734578) in brackets... GPS doesn't work.
Installed the HTC GPS tool, looks like GPS data is coming in, but can't get a fix. Then tried to use GPSgate, and it says GPS data is coming in but cannot get fix. Both of these two apps can't find any satalites.
Does anyone know what is up?
Zhariak said:
GPS problems
Ok so I have a North American GSM x9501...
Never used the GPS (Telenav isn't available to Canadian residense). This device is unlocked and NOT purchased from Rogers...
Downloaded Google maps, tried to use GPS and it wouldn't work. Set the settings manually Com4 57600 baud... It says searching for satalites, and has some HUGE number (54357734578) in brackets... GPS doesn't work.
Installed the HTC GPS tool, looks like GPS data is coming in, but can't get a fix. Then tried to use GPSgate, and it says GPS data is coming in but cannot get fix. Both of these two apps can't find any satalites.
Does anyone know what is up?
Click to expand...
Click to collapse
yep, go out in middle of a field or open Terrace or any place where you can see the sky above you head directly and then start google maps with GPS or HTC GPS tool or GPS gate etc , wait 3-5 min and then it should have fix...
cheers
I've given is some time... Probably over 5 minutes...
It's just odd, I have lots of experiencing using GPS software and devices. It looks like it should be working, the only odd behaviour is:
1) It finds no satalites
and
2) Google Maps says "Seeking Satalites (3874732644)" which is odd, because theres not that many GPS satalites, lol.
Change the Baud Rate to 9600 and see whether it will work.
Tried different baud rates.
Yesterday I let it sit for 15 minutes on google maps until finally it said there was no reception...
And I know I have reception because I was outside. Both my TytN II and HP iPaq have no trouble aquiring fix's...
download free VISUALGPS CE and install. Then connect it to COM4 and press start.
See the NMEA log monitor section. You should see lot's of data, if not, your GPS might be bad.
I'm unsure if your 9501 will work with the ROM's we use in Europe to make calls, and have GPS enabled.. If it's OK, I would flash Thai Hugo's Age of Reason and check again your GPS.
I'm using the factory ROM for the X9501 (Which does support GPS off the bat).
I used the HTC tool, and it looked like NMEA data was going through...
Zhariak said:
I'm using the factory ROM for the X9501 (Which does support GPS off the bat).
I used the HTC tool, and it looked like NMEA data was going through...
Click to expand...
Click to collapse
On the HTC tool there is option to see the satellites , check if its has any satellites on red color, if so keep the shift out in terrace or garden until 3 satellite color changes to green , have patience....
if it does not show any satellite on the HTC tool then probably you need to flash the rom with some new rom from the forum ..
Before you do that make a copy of your Stock/original rom ..see forum for instruction
PS: Since you have the stock / orginal rom X9501....would you do me a favour and check if you connect to head set and on Windows mobile side WM6, can you record a message and then play back and you can hear your self back .... I wanted to know if the mic works with head set on WM6 side...for the Stock 9501 ROM.
Cheers.
shawankit said:
On the HTC tool there is option to see the satellites , check if its has any satellites on red color, if so keep the shift out in terrace or garden until 3 satellite color changes to green , have patience....
if it does not show any satellite on the HTC tool then probably you need to flash the rom with some new rom from the forum ..
Before you do that make a copy of your Stock/original rom ..see forum for instruction
PS: Since you have the stock / orginal rom X9501....would you do me a favour and check if you connect to head set and on Windows mobile side WM6, can you record a message and then play back and you can hear your self back .... I wanted to know if the mic works with head set on WM6 side...for the Stock 9501 ROM.
Cheers.
Click to expand...
Click to collapse
Yes the Mic works, I helped Comonex with some testing to find out which radio firmwares supported the Mic.
Yes I can record/playback on the Windows Mobile side, and Yes skype works, etc....
Zhariak said:
Yes the Mic works, I helped Comonex with some testing to find out which radio firmwares supported the Mic.
Yes I can record/playback on the Windows Mobile side, and Yes skype works, etc....
Click to expand...
Click to collapse
Did you find satellites on your GPS Tool ? either red or green in color ?
Thanks for letting us know that the head set works on wm6 side ....
shawankit said:
Did you find satellites on your GPS Tool ? either red or green in color ?
Thanks for letting us know that the head set works on wm6 side ....
Click to expand...
Click to collapse
No problem.
Like I said, zero satelites...
Zhariak said:
No problem.
Like I said, zero satelites...
Click to expand...
Click to collapse
Can I ask another favour , do you have any registry editor installed on you shift.
if so , can try to dump/export the registry settings for HKLocalMachine (HKLM) to a xml ot reg file and then copy / upload the xml/reg file here .
we want to use head set with X9500 shift and are trying to find a solution , may be its a reg setting that can fix the problem.
Appreciate your kind help
shawankit said:
Can I ask another favour , do you have any registry editor installed on you shift.
if so , can try to dump/export the registry settings for HKLocalMachine (HKLM) to a xml ot reg file and then copy / upload the xml/reg file here .
we want to use head set with X9500 shift and are trying to find a solution , may be its a reg setting that can fix the problem.
Appreciate your kind help
Click to expand...
Click to collapse
I thought all the issues were fixed with the Shift's and headset usage?
Zhariak said:
I thought all the issues were fixed with the Shift's and headset usage?
Click to expand...
Click to collapse
Nope , the issue is we cannot use the head set in WM6 as the mic on Head set does not work....so we have to use the speaker phone and its not good for phone calls private or business.
I would appreciate if you can help us to resolve the issue , if you can dump the reg keys for HKLM / Drivers/inbuilt ... it might give us some direction.
Appreciate your support.

No GPS sat lock

I've had the imagio for about 2 weeks not. and can't get the GPS to work. I've tried every reg edit I can't find. Tried useing GPSID.dll rather then GPSID_HTC.dll. I tried installing the GPSModDrivers. Ran QuickGPS. Done Hard resets and half a dozen flashes. Nothing. The only program that works in Verizon's VZ Nav. TomTom, Google maps, Bing never get any sat lock. I'd say it was my phone but my dad's and the floor model at our Verizon store all have the same problems. The guy at Verizon said it was an issue with a lot of them and HTC was working on an updated rom for it. But that could be crap. Any ideas?
You probably have a faulty unit - my GPS always locks pretty quickly.
Agreed. My GPS works flawlessly. I use it all the time with TrackMe.
Never had the first problem with the GPS , works great with Google and Bing maps. Yours Dad's phone must be defective , swap it out for a new one.
Just wondering...
Start/Settings/System/External GPS on Access tab, did you marked
"Manage GPS atomatically (recommended)
If you don't do this, have you tried setting the Com Port Manually? I have a felling that if VZ works that is just a configuration issue.
As a last resource, you could use a terminal program like Token2Shell Mobile (free 30 Trial) to read the Com port "Usually Com4" and 4800 Baud and check the NMEA string coming in, here is a example from mine.
$GPGGA,204838.8,2949.9400,N,09532.6595,W,1,08,1.20,19.00,M,-2.00,M,,*56
$GPRMC,204838.8,A,2949.9400,N,09532.6595,W,21.60,268.00,021109,,*27
$GPGLL,2949.9400,N,09532.6595,W,204838.8,A*22
$GPGSA,A,3,02,04,05,09,10,12,17,27,,,,,2.60,1.20,2.40*08
$GPGSV,3,1,10,12,45,313,30,04,55,028,25,10,31,174,24,02,69,293,21*72
$GPGSV,3,2,10,09,21,243,21,05,24,182,21,17,27,080,20,28,03,143,16*7F
$GPGSV,3,3,10,27,19,237,14,30,11,319,14*7B
The bold is the amount of Satellites, in this case 8
Hope this gave you some ideas, let us know if it works for you...
Sorry for the double post working from device.
Keep in mind that some of the things you may have installed to correct the issue may have negatively affect registry settings, sync your contacts and do a hard reset on the device. And do not set up VZ nav when you bring it up.
Then do this:
Install Google maps
Make Sure your Location Setting is "on" in the phone settings. If it is on then toggle it to "911" hit okay on upper right corner then go back into it and toggle it back on and hit okay.
Soft Reset and let boat up completely
Open Google Maps And make sure USE GPS is not checked.
Click "X" in top corner to let it run in the background
Run Quick GPS and select "Download"
Open Google Maps again and select "USE GPS" make sure you have a clear view of the sky and it should take less than one minute to lock
Sometimes a soft reset is required to get a gps lock.
Actually, It is a known issue with the particular gpsone chipset. It's an issue with location caching with agps, but this phone comes stock with agps disabled. However, I have not heard that many complaints on this forum, of course not everybody uses gps. If you soft reset before you try and use you shouldn't have issues. Trust me this is my third HTC touch series phone with this issue (diamond, touch pro, imagio). With my imagio it suddenly stopped having this issue, wierd. I used to use a program called HTC gps tool on my touch pro that would clear the cache for you without having to soft reset each time you might want to do some searching, not sure if it works with wvga screens.
bastukee said:
Just wondering...
Start/Settings/System/External GPS on Access tab, did you marked
"Manage GPS atomatically (recommended)
If you don't do this, have you tried setting the Com Port Manually? I have a felling that if VZ works that is just a configuration issue.
As a last resource, you could use a terminal program like Token2Shell Mobile (free 30 Trial) to read the Com port "Usually Com4" and 4800 Baud and check the NMEA string coming in, here is a example from mine.
$GPGGA,204838.8,2949.9400,N,09532.6595,W,1,08,1.20,19.00,M,-2.00,M,,*56
$GPRMC,204838.8,A,2949.9400,N,09532.6595,W,21.60,268.00,021109,,*27
$GPGLL,2949.9400,N,09532.6595,W,204838.8,A*22
$GPGSA,A,3,02,04,05,09,10,12,17,27,,,,,2.60,1.20,2.40*08
$GPGSV,3,1,10,12,45,313,30,04,55,028,25,10,31,174,24,02,69,293,21*72
$GPGSV,3,2,10,09,21,243,21,05,24,182,21,17,27,080,20,28,03,143,16*7F
$GPGSV,3,3,10,27,19,237,14,30,11,319,14*7B
The bold is the amount of Satellites, in this case 8
Hope this gave you some ideas, let us know if it works for you...
Click to expand...
Click to collapse
I concur if it was a hardware issue VZ nav wouldn't work.
Sweeny Russ:
I being looking for a program to manage the GPS chipset, I use many kinds of GPS devices for work and it would be the first time I see a GPS device I can't program/manage. Gpsone chipset is the GPS on board device? Do you have a link for this HTC GPS program? I wonder if I can actually program with it...worth asking
One of my friends had the same problem as you mentioned. I asked him to do a hard reset and after a HR, the GPS has been working smoothly. Please try a HR!
I have no complain about my Imagio's GPS because it works much more than I expected. I can get 7-8 sattelites fixed in house, near the window where my old phone Touch HD could not fix any sattlelite.
I'm about to try bastukee suggestion. Giakhoa are you saying do a hard reset after a hard reset?
bastukee This is what I got, any ideas?
$GPGGA,,,,,,0,,,,,,,,*66
$GPRMC,,V,,,,,,,,,*31
$GPGLL,,,,,,A*11
$GPGSA,A,1,,,,,,,,,,,,,50.00,50.00,50.00*35
bastukee said:
Sweeny Russ:
I being looking for a program to manage the GPS chipset, I use many kinds of GPS devices for work and it would be the first time I see a GPS device I can't program/manage. Gpsone chipset is the GPS on board device? Do you have a link for this HTC GPS program? I wonder if I can actually program with it...worth asking
Click to expand...
Click to collapse
Let me know how this pans out. I haven't used this new version but it will allow you to play around with some setting my gps locks instantly so I'm not going to mess with it I just now it works on vga, you might need a screen rotate app to read all settings.
Original Post where I found it is here
Sweeny, Program works nice. it's an easier way to see the data then the program bastukee gave me. But sadly I don't know what half the options do and it still gives me the same date I posted in #12. Thoughts anyone?
That's exactly what you would get when satelites are not being seen, in fact you can't even see a Clock. Once I finish this 3 day trip to India and settle I will try that program and see how my settings look like and post screenies. "I'm a zombie atm"
Thanks for the help. I'm going crazy trying to get this to work.
While bastukee is on his trip, anyone else have any ideas?
hackthis02 said:
While bastukee is on his trip, anyone else have any ideas?
Click to expand...
Click to collapse
be sure ur using com port 4
There's where I got the data that matched the data bastukee showed me. And the one in the settings.
I might be pointing out the obvious but, did you try this outside? After like a minute?

Categories

Resources