every day I charge my android device by connectong it to p.c . today I found that rouch screen is not working on my mobile when connected to p.c
but we can do aNything with the buttons below.
when I remove the usb cable the toch screen works.
Can anyone please find a cure for it.
thanks in advance.....
What phone do you have with what firmware?
Related
HI ! In the firsth place sorry for my bad english.
I have had a titan for about 6-7 months and a week ago it stopped working without a reason.
It stopped responding and after a reset it only shows the starting logo, and after that the screen slowly shifts to pure white colour and I can hear a one "beep" sound.
I tried to hard reset it and everything but without any luck. It charges the battery fine when connected to a USB port (orange light),
after turning it on i get the green ligh, main branded logo and some numbers (M05 S04 B06 D 3.60 and 2 lines of other numbers but they show only for like half a second and disappear so i cant write them down)
after that nothing, the logo screen goes all white, with some "notification" sound and thats all.
When connected to PC It gets detected as "something" and I cant use any flashing software because it says that it did not detect the device,
one time It got detected as some modem device. Is there any way to bring it back to life ? or is it bricked permanently ?
Please Help
And Thank You in Advance !!
Update: I managed to make a connection between my PDA and PC
it is detected as "Microsoft windows mobile adapter #2", and my PDA_PC is detected in My Computer,
but when I try to flash it the software detects it i get the message to wait 5 min till the flash is over but
as soon as this message appears my PDA is getting disconnected and i get an connection error...
help ;(
Ah... and one more thing, I dont know if it matters but when i open my PDAs memory the windows folder appears to be deleted...
can any one zip their windows folder and give me a link to it... maybe that will help ;(
I have the same problem on my Mogul with connecting to my Computer! For some odd reason it won't sync and restarts my computer automatically!! WEIRD!? Just go check out some of the Unbricking posts or Google it- they may help you!
Two days ago my phone started to freeze up and the touch screen wouldn't work sometimes. Yesterday the phone froze so I pressed the reset button and when it turned back on the touch screen stop working for good. So I decided to do a master reset hoping it will work again, and now Im stuck on the windows mobile screen (green) and it says "tap the screen to set your windows mobile based device" but my touch screen doesn't work. Don't no what to do, the phone is stuck on this screen, please help!
this happened to me the other day. it was because of a program i had installed. all i had to do is uninstall the program and soft-reset. you shouldnt have master resetted. now you have to reflash your phone. what service and phone do you have? check the other posts for your oem rom. if you cant find it i'll help you with reflashing. good luck.
could b an easy fix wen it happened to me i was freakin i read somewere even the smallest thing between the screen and i dont a good word for it . were the srceen meets the phone one corner of my screen protecter was just between them the smallest peice in there took out my screen i anmost took it to get fixed im not saying u wont but make sure u clean the edges make sune theres nothing u in there first gl
Touch screen problem again
I have the same issue too, after hard-resetting the pda (HTC P4350) it is stuck on green screen with message " tap the screen to set up your windows mobile based device". The problem is touch screen of it is not working for quite a long time and because of this i have been using another p4350, but i think i am so careless and after dropping the second one into the water (it stayed only 3-4 seconds) its usb syncronization stopped to work, it can be charged but no data connection through usb cable (i have checked 3-4 different usb cables). Now i have a lot of information saved in the second one and i need to sync it with pc without using usb cable. I have planned to substitute pim.vol file of the first one with the second, then i will connect the first one to usb and finally sync. But this green screen really make me dissappointed.
Can anyone help me on this matter.
Thank you for all (at least for reading my problem)
sprogo said:
i have the same issue too, after hard-resetting the pda (htc p4350) it is stuck on green screen with message " tap the screen to set up your windows mobile based device". The problem is touch screen of it is not working for quite a long time and because of this i have been using another p4350, but i think i am so careless and after dropping the second one into the water (it stayed only 3-4 seconds) its usb syncronization stopped to work, it can be charged but no data connection through usb cable (i have checked 3-4 different usb cables). Now i have a lot of information saved in the second one and i need to sync it with pc without using usb cable. I have planned to substitute pim.vol file of the first one with the second, then i will connect the first one to usb and finally sync. But this green screen really make me dissappointed.
Can anyone help me on this matter.
Thank you for all (at least for reading my problem)
Click to expand...
Click to collapse
use the buttons to navigate to the screen alignment setting...[press the windows key, navigete to settings and click, scroll to bottom tab system, click on screen. Navigate to align screen and click, then use stylus to recalibrate. Hope it works.
Hi,
I just cracked the upper left corner of my Wileyfox Storm. there's a burst from the top to he bottom of my phone which resulted in an error of the touchscreen, it's not working at all. I tried to connect my phone via USB cblae to my computer so I can restore my files to de PC but it's not connecting at all...:crying:
At first I had the usual scren to enter my PIN code for my Simcard, but now it is gettin ON/OFF constantly (probably untill the battery dies).
Any one who can help me to restore my files ?
I was in same situation. Answer: You cant get files unless you replace your screen.. BUT if You decide to replace screen, You wont find replacements on the web to buy them, and You will have to send phone to Wileyfox, the'll say that it's no longer supported, or if they will fix it, it will be wiped completely.
After braking stom i bought N5 and im happy as hell
If you open the phone it is possible to disconnect the touch panel and get the phone to start. With a USB otg connector you can navigate with a mouse. With a USB hub you can also connect a pc (mouse required to enable file transfer) at the same time or you can transfer the files via WiFi / Bluetooth (sloooow)
Sent from my XT1580 Hammer using Tapatalk
LCD Screen of my brothers zenfone 5 ( t00j ) was broken then i bought a new lcd part and try to repleace it carefully (its not my first time) but after change lcd with the new one, the phone can not boot.. i tried connect to charger and still didnt any changes then i connected to pc... as a result nothing happening too.. but sometimes there is windows device plug in sound for a sec then plug out sound and pc says that windows found a new device.... then pc try to download drivers which called "Cloverview" then pc says that download canceled cause the device disconnected.. at begining a mean before the operation the phone was working without any problem just it has a broken lcd... i didnt understand why its stop to work after change LCD. Now I trying repleace with broken lcd but resault is same.. i mean now the phone not working with broken lcd too.... are there anyone can help me? any ideas? how can debrick it?
Hi,
I broke my LCD display a couple of months ago still, I managed to use the phone with the epaper display and eventually reinstall it without clearly writing down the exact procedure (with Lolipop)
Today, as my Marshmallow update freezed, I had to wipe all, thinking well I could easily find the steps to start the phone again.
The only problem remains that Setup Wizard wants us to use the LCD display, and I can't.
The last time I managed to use screen mirroring on Windows, with androidscreencast-0_3_1.jnlp, which is dicontinued.
To that extend, I allowed USB debugging (three lines to add) on system/build.prop and default.prop and copied a file from my computer (adbkeys.pub) to a certain folder in the device, to allow my PC to operate on the cellphone
But that last step doesn't work anymore.
I can see a dialog briefly popping up on the yotaphone, prompting me to allow the computer for debugging, but I can't click.
Droid Explorer tells me that this yotaphone is not allowed in $Vendor (or so on, I can't remember well).
So I managed to authorize the screen mirroring before, to start the phone, but I can't right now, although I found a new app, androidscreencast-0.0.10s-executable.jar.
I would have to copy adbkeys.pub to data/misc/adb/adb_keys, but as of today, that directory doesn't exist.
Can somebody please help me with that?
Thanks,
Hi,
I solved a similar situation by plugging a mouse to the phone using a usb to micro USB adapter (also called USB OTG adapter).
wicoz said:
Hi,
I solved a similar situation by plugging a mouse to the phone using a usb to micro USB adapter (also called USB OTG adapter).
Click to expand...
Click to collapse
Thank you for answering. And what do it do to plug a mouse?
I've made it : the phone starts again.
If anyone is interested, I'll tell the trick for a broken front screen like mine.
Now I'm looking forward to make an image backup of it as it is very fresh if it can save me or others !
And I need advices for that?
Hi!!!
I have the sale problem
How did you bypass the wizzard???
hi. how do you bypass setup wizard? i had mine reset due to stuck. before im using only back screen. please help!
My front screen also stopped working all of a sudden without me doing anything. I was able to use the eInk so I did a factory reset. Now however I'm stuck since I can't boot the phone without a working front screen. I was wondering if a software issue stops the front screen from working and if there is a way to check/fix it.