Just got my second slide, its got a different qwerty! - myTouch 3G Slide General

My camera took super blurry pics so tmo sent me a new phone. The top row on the keyboard has smaller numbers and the zero has a slash thru it. Its very helpful. Also this phone doesn't have the creaky back, but it does have a little gap on the right bottom corner :/
Sent from my T-Mobile myTouch 3G Slide using XDA App

I really dislike that the numbers are the same size as the letters on the top row. Sounds like a good move.

Have you tried to root it?

I've read that the new Slides, the kind the OP got, are susceptible to the root method we have, because HTC fixed the recovery exploit or something.

Havnt got to root it yet, looks like I'll be sending this one back too. I can't hear anything when making a call unless speaker phone is on.
Sent from my T-Mobile myTouch 3G Slide using XDA App

Does anyone have pics of this new keyboard?

slughappy1 said:
I've read that the new Slides, the kind the OP got, are susceptible to the root method we have, because HTC fixed the recovery exploit or something.
Click to expand...
Click to collapse
I rooted mine just fine. And help a few in the IRC channel root theirs as well. Please don't spread bad rumors.

got mine 2 weeks ago and the zero has the line though it as well. No problem rooting it or flashing.

My bad. I could have sworn that I read that some where. Maybe I just dreamed it?

Second production run Slides (new keyboard) ARE rootable and run the same recovery as first production run Slides.
/end rumor

Anyway to trade my phone in for the new one cause this keyboard sux so bad
~ SykosouL~ d-_-b

Paticakeman said:
My camera took super blurry pics so tmo sent me a new phone. The top row on the keyboard has smaller numbers and the zero has a slash thru it. Its very helpful. Also this phone doesn't have the creaky back, but it does have a little gap on the right bottom corner :/
Click to expand...
Click to collapse
Your points, in order:
My camera on the Slide takes pretty decent pictures. Of course, this is relative, based on my prior 2 x G1s (total crap) and 2 x MyTouch 1.2s (still crap, same lens assembly I think). Having seen some incredible photos a few phones back from my VX-8000, plus an adjustment ring for macros, this was a serious disappointment. (Speaking of which, it had better sounding, stereo speakers, too. Jeez.)
I guess I have the original keyboard, because my zero has no slash. I should note that we ALL have different keyboards than the mockups, where those numbers (and the FN keys) were shown as red. Why they made this choice is beyond me. All the alternate mappings should be a different color, and offset, like they were on the G1. And not slanted either, because it looks toy-like.
The G1s squeaked and cracked sometimes, too. I think it's inherent in the slider designs, and will become evident after more use. But you might get lucky.
As for the gap in the corner, I'm assuming you can tell it has one because the keyboard backlight leaks through the crack? I've got the same problem with mine, but on the left side. I thought about using some of that black putty-type material that's used for sealing outer wall holes in houses, where wires might come in... they used to sell it at Radio Shack. That would be pliable and could be smeared/jammed in there, and would match color. Might still have some around here, it lasts forever.

SykosouL said:
Anyway to trade my phone in for the new one cause this keyboard sux so bad
Click to expand...
Click to collapse
My experience with TMO has been that they'll honor the one-year warranty by cross-shipping, with a credit card as surety. But I have four lines. That said, I had to return two G1s because of faulty trackballs. Supposedly they will give you refurbished equipment, though they always looked new to me.
If you're still within your remorse period (I believe it's 14 days, in the US at least) you should be able to return it and get another Slide or any other phone, if I'm not mistaken. YMMV with prepaid plans.

Related

Sprint Hero silver faceplate defect?

Hi everyone,
So I just received/activated/started using my new HTC Hero this week, and I really love the phone. Just today I noticed a strange new phenomenon that I hadn't seen or felt up until today. Wondering if anyone else has the issue, because I'm considering returning my phone to get a replacement - I've had it less than 5 days.
My front silver faceplate, where all the buttons are, seems to be a bit loose on the left side (by the Menu/Home/Send) key. When I press down on it ever so slightly, it makes a very quiet clicky noise - similar to a regular button press but much softer. The right side of the silver area also presses down, since it is just plastic, but makes no noise - just the left side.
This makes clicking the Menu and Home keys much less pleasureable considering it almost feels/sounds like I'm getting two "clicks." This is the type of hardware behavior I'd expect after having the phone for 6 months - not 5 days! To make matters even weirder, the problem seems to come and go, and I haven't figured out a definitive pattern to that yet. Should I return it for a new phone?
Anyone else noticing this (or any other type of physical defect) on your Sprint Hero?
I think you are just over reacting... Mine phone also does this and I have had it a month before release without any problem. I think it is just how the button is designed flush with the rest of the other buttons all in one plate.
I believe it's supposed to be that way as well. You're more to welcome to go to the retail stores and check out other Heros there to confirm.
Yes mine does this and it makes the phone feel a bit cheap. But I'll live.
I have 3 hero's in my family. One of them was creaky and drove me nutz, swapped it out at BB. New one works awesome..... I could not live with the creaky buttons. felt like my refurbed touch pro.... ewwww
Swap it out. It may be true that many DO do that but they SHOULDN'T and it represents a defect. Don't be told otherwise. My didn't/doesn't do that, my gf's did and we swapped it out for a working one. Have them open the boxes to find one you like. Sprint phone boxes are not sealed or taped shut, they just open so try till you find one (will probably be the first one you try out.)
I guess what bothers me the most is that it didn't do it when I first got it, I feel like my pressing the menu key too many times is what did it! It seems like a pretty bad design flaw... hoping they don't give me a hard time when I try to return it on Wednesday.
Thanks guys!
tduck said:
I guess what bothers me the most is that it didn't do it when I first got it, I feel like my pressing the menu key too many times is what did it! It seems like a pretty bad design flaw... hoping they don't give me a hard time when I try to return it on Wednesday.
Thanks guys!
Click to expand...
Click to collapse
The Hero comes with a warranty. If it's truly a design flaw, then HTC will repair/replace the phone for the length of the warranty.
Like other people here say, all our phones do that, it's not that big a deal. I'm more concerned with the trackball. I mean, there's no way to remove it (that I've seen) to clean the mechanisms underneath. And if any of you remember when your mouse used to have a ball and not a laser pointer, those little wheels get really dirty and gunked up really fast. That's just sitting on your desk, I can only imagine how messed up the track ball will get going in and out of my pocket and being touched by filthy dirty oily thumbs all the time.
I know how bad a trackball can get I just got the Hero after having a BB Pearl 8130 for 1 1/2 years, I don't use the Hero's trackball anywhere near as much but I can see it has already picked up dirt from my fingers I just hope it doesn't turn into a problem like the trackballs on the BB Tour
that is normal, every SPrint hero i have seen does that, but like they said above, you can go to the retail store, (not a privetly owned one, they will make you go to the retail store) and see if it is a 'defect'
Mine doesn't do it. If it did I would return it.
I don't have this but my green phone button seems lower than the red one, making it a bit harder to press (especially cuase I have no nails due to biting them like crazy)

adhesive loosening on HD2?

--
thats how mine is but in the bottom. not a big deal but i did feel it
several people reported the same thing before. screen not flush all the way around. there's no adhesive, the screen slides out of the outer sleeve if you remove the screws in back.
Oh...
--
mine does it on the bottom.
it feels like there is a slight gap in between the bottom bezel and the screen.
It's not a problem at all, but it sure is annoying at times.
On the left side of my HD2 the screen is easier to push in at the top and bottom, but it takes a lot of pressure to make it "squeak".
If I had a cosmetic issue, you can bet I would be on a waiting list to get a replacement. The looks on these phones are nearly as important as the performance, IMHO.
oh i deff agree, @op, if you only just got it id be trying to take it back.
Same on mine at the bottom - just barely - if you slightly press between the usb and headphone jack you hear a slight (guess it sounds like) a click and you feel it slightly move. When the usb jack is plugged in it stops Some play and I don't think its worth returning - also don't think it will get worse. Case materials should have been a little more rigid. Think if you get a hard shell case or aluminum skin - when they become available you won't notice it. Talking to other guys with the HTC branded Euro version their build quality is a bit better. Think its pretty much the same with all HTC stuff - their branded models (TYTN TYTN II etc.) were build better than the AT&T versions - they also cost a lot more because they aren't subsidized.
Personally feel the HD2 of all the MS phones with the exception of the HTC TYTN I is the most solid. The Fuze which I just got rid of was probably the worst. The case was ok but the front keypad was pure junk - out of the box the thing felt like it was going to break and it never sat "square" in its opening. The USB ports on all of them were really weak and were super loose out of the box. The slide out keyboards always loosened up and had too much play.
stim141 said:
Personally feel the HD2 of all the MS phones with the exception of the HTC TYTN I is the most solid. The Fuze which I just got rid of was probably the worst. The case was ok but the front keypad was pure junk - out of the box the thing felt like it was going to break and it never sat "square" in its opening. The USB ports on all of them were really weak and were super loose out of the box. The slide out keyboards always loosened up and had too much play.
Click to expand...
Click to collapse
For me, the Touch Pro 2 has top honors when it comes to "feeling" solid. My sister dropped it the other day and cracked the bevel, with a large triangle missing near the volume rocker and three other cracks on the bottom, top and opposite side.
I am encouraging her to return it and claim the insurance, but since there is no change in the quality of the phone's operation, she wants to keep it.
Again, for me, the TP2 seems more solid than the HD2, but the HD2 is very well-built compared to other phones. I am so paranoid about even putting my phone down on a hard surface, due to the sharp edges of the camera mount and the light metal case.
I will be installing my new invisibleSHEILD as soon as sirphunkee and I can make the time to meet somewhere clean (I have a 2yo at home ). I imagine my paranoia will drop a bit then...
I dropped my phone while working out at the gym.
I was on the treadmill, and dropped the phone from my hand to the treadmill belt, then it flew out (i was running pretty fast at speed 7) and ended up hitting the wall behind me. Well, I freaked out and ran over to check on the phone.
Even though I had NO protection, the phone was perfectly fine. Only a tiny scratch that's barely visible on the top left bezel, and everything was fine.
I really was surprised at the sturdiness of the phone.
Snarksneeze said:
For me, the Touch Pro 2 has top honors when it comes to "feeling" solid. My sister dropped it the other day and cracked the bevel, with a large triangle missing near the volume rocker and three other cracks on the bottom, top and opposite side.
I am encouraging her to return it and claim the insurance, but since there is no change in the quality of the phone's operation, she wants to keep it.
Again, for me, the TP2 seems more solid than the HD2, but the HD2 is very well-built compared to other phones. I am so paranoid about even putting my phone down on a hard surface, due to the sharp edges of the camera mount and the light metal case.
I will be installing my new invisibleSHEILD as soon as sirphunkee and I can make the time to meet somewhere clean (I have a 2yo at home ). I imagine my paranoia will drop a bit then...
Click to expand...
Click to collapse
My TP2 fell out of my hand in a parking lot, the thing didn't hit hard, but it left a small scratch on the screen (it was visible, but wasn't too obvious) and then some nicks at the corners of the device. It did look used. I returned it to T-Mo (I was still within 14-day remorse period) and used the money I got back to get an HD2 instead (for some reason I didn't qualify for either the full or the 11 month upgrade price, only 50 bucks discount... now that I think about it, I should have gotten it at full price, also, the day after it arrived (ordered online) T-Mo came out with the 2 for 1 smartphone, but alas, a new line was needed and I had no use for it).
I've dropped my HD2 at least 4 times since and there's not a nick on it. I figure the glass screen helps (as opposed to the TP2's plastic), even if it's a finger print magnet. I also have no problems with the screen or bezel being uneven, even after dropping it, nor have I had any single of the problems people complain about, so, go figure, I got the perfect production HD2.
Whew.... OK. Soooo glad to hear this isnt only my device. Mines is on the bottom. I also dont see it getting any worst and its so minor right now its probably not worth the hassle of returning. I tend to keep the gel case on it anyway..
thrashingdeth said:
thats how mine is but in the bottom. not a big deal but i did feel it
Click to expand...
Click to collapse
x2 same as mines.
--
I had an issue with mine creaking, on the bottom. Mainly when I was pressing the start key, or back. Got a replacement and it seems better. For a phone seriously delayed I don't get how the quality is so terrible.
my first hd2 the camera lens started to rattle tmobile replaced it
Tm5078 said:
my first hd2 the camera lens started to rattle tmobile replaced it
Click to expand...
Click to collapse
Was it the camera lens or the casing around the camera?
After watching the tear-down video I could see how the camera casing could be improperly installed and loosen after a bit of handling, but I thought the lens was pretty solid...
--
JWang158 said:
Seriously, this phone is turning out to be pretty half baked.
Click to expand...
Click to collapse
I disagree. Not sure if I got lucky or not, but my phone is in perfect condition despite being a month old and spending most of that time in my back pocket.
I've sat on it countless times, dropped it from my hand to the floor twice and dropped it from the car holder to the console in my vehicle so many times I can't count.
The only problem I have is with the SMS freeze, and I've solved 90% of that by keeping my inbox clean. If I have the money for a class 6 microSD card, I'd bet on having solved the other 10% of my problems.
Since upgrading my radio, I don't have any problems with dropped calls, missing texts, loss of 3G or any of the other popular issues that seem to be plaguing the new owners.
Since bad news always travels faster and wider than good news, one simply can't infer from the issues being discussed here that they are the norm. I would suspect a very small percentage of the HD2 owners frequent the forums here, and of those another small percentage are having hardware issues.
I've been through a few of these new phone releases here in the past and from my experience I would say that this is pretty normal for the first few months of a phone's release. In another month or so there will be a firmware upgrade to fix the freezing and icon switching, then a lot of the issues will switch from hardware to software. Soon after that, I expect everyone will be clamoring for the release of a Windows Phone 7 ROM, followed a few months later by a newer, faster phone that everyone will be switching to. A cycle, vicious but almost predictable.

Us old G1/Dream users need a successor!!!

I just made this thread to see how us G1/Dream owners feel about our outdated, falling apart phones.
Phones we should consider:
Nexus One
HTC Sidekick Twist
Samsung Galaxy S
HTC Evo 4g
Add more phones to the list and tell me how you feel about your G1 and why there is no worthy successor. (Full five row Qwerty and more)
Motorola Droid/Milestone. Does have qwerty.
But I think I'll wait until christmass with change
HTC needs to make the true next successor the G1
make it the first 4g phone on t-mobile call it the g2 release at the end of the year with gingerbread stock and bam SUCCESS
theres not a single phone out now, or rumored to be coming out that I would give up my G1 for.
maxidus said:
Motorola Droid/Milestone. Does have qwerty.
But I think I'll wait until christmass with change
Click to expand...
Click to collapse
Droid keyboard is ****ty, useless and doesn't have 5th numeric row.
I wonder if LG Ally will be available in Europe...
It hurt as the G1 has some good and bad points as
Only 5 row keyboard Android in U.S.
Started Android from rc28 (look at what Android has accomplished!!)
Limited Space
Outdated Processor
Is getting old and many are falling apart
Still goes for $150 - $450!!!!!!!
G1 did well to show Android but now we need a true successor.. Have you all seen the Inbrics M1? 5 row keyboard, but I wish it was stock Android 2.1
Mytouch 3G Slide FTW xD
J.a.M said:
make it the first 4g phone on t-mobile call it the g2 release at the end of the year with gingerbread stock and bam SUCCESS
Click to expand...
Click to collapse
There's already a g2.. it's tmobile's name for the hero.
jamesd86 said:
theres not a single phone out now, or rumored to be coming out that I would give up my G1 for.
Click to expand...
Click to collapse
Not even the Vision...?
goldenarmZ said:
There's already a g2.. it's tmobile's name for the hero.
Not even the Vision...?
Click to expand...
Click to collapse
I didn't look more than one google page deep but the last news I found was just a build id that said qwerty keyboard and the name of the phone, not enough for me to say I want. Seriously mu next phone purchase will be in 2011...by then we should have a dualcore mobile that kicks ass...now if only batteries followed moores law.
The Samsung Galaxy S Pro looks decent, it has a 5 row qwerty keyboard but still nothing on the specs (probably identical/similar to the Galaxy S).
HTC needs to re-release the G1/Dream with the Snapdragon processor, more ram/rom, better screen (higher resolution, better touchscreen, AMOLED display), better camera (at least 5MP with flash) and a normal headphone jack. Keep the same case/keyboard/screen size... I'd buy it in a heartbeat.
Had my G1 for a couple of years now and it's a great android starter phone.
But after a while you come to realize it's not that great after all.
Just like that guy in Utah, that died by firing squad last night, I've decided to place my phone against a wall (blindfolded of course), and let off a .50 cal round from my M107, straight into the menu button. I offered it one last flash, but true to form and solid as a brick (get it? brick? hahahaha) it refused.
So the plan that i've being plotting for a while now is coming into fruition. I've discovered something that has literally thousands more apps, great ui/responsiveness and is cosmetically better looking.
Six days from the date of this post I will have my new phone.
wcdisciple said:
Had my G1 for a couple of years now and it's a great android starter phone.
But after a while you come to realize it's not that great after all.
Just like that guy in Utah, that died by firing squad last night, I've decided to place my phone against a wall (blindfolded of course), and let off a .50 cal round from my M107, straight into the menu button. I offered it one last flash, but true to form and solid as a brick (get it? brick? hahahaha) it refused.
So the plan that i've being plotting for a while now is coming into fruition. I've discovered something that has literally thousands more apps, great ui/responsiveness and is cosmetically better looking.
Six days from the date of this post I will have my new phone.
Click to expand...
Click to collapse
You're a MORON, and I would kindly ask you to STOP POSTING.
lbcoder said:
You're a MORON, and I would kindly ask you to STOP POSTING.
Click to expand...
Click to collapse
i do concur lbcoder...
wsdisciple, does someone pay you for spamming this link to apple site? Or are you 10 years old?
edit:
@topic
As I stated before, I'm not going to replace G1 for now. Simply because there is no other decent phone with 5 row qwerty keyboard and I don't feel like pushing or holding shift to select numbers.
d3v14n7 said:
The Samsung Galaxy S Pro looks decent, it has a 5 row qwerty keyboard but still nothing on the specs (probably identical/similar to the Galaxy S).
HTC needs to re-release the G1/Dream with the Snapdragon processor, more ram/rom, better screen (higher resolution, better touchscreen, AMOLED display), better camera (at least 5MP with flash) and a normal headphone jack. Keep the same case/keyboard/screen size... I'd buy it in a heartbeat.
Click to expand...
Click to collapse
Almost. Lose the chin and have the button-area be part of the slidey-bit w/ the screen.
GinoAMelone said:
Almost. Lose the chin and have the button-area be part of the slidey-bit w/ the screen.
Click to expand...
Click to collapse
I love the chin and real buttons! My girlfriend has a Droid, and everytime I go to hit any of those soft buttons, I'm momentarily aggravated. Especially for long presses, which I use VERY often. Same shell, maybe add an exterior hardware search button, replace the trackball with an optical pad, front facing camera, and maybe a seperate led for charging. That, and everything else that's been said, would be the best phone ever. And it'd be faster than my computer..
wc is still going on with his apple fan-boy craziness?
The only real successor to a G1 would be to completely remake it with nothing but hardware upgrades. And a tad bit stronger. I read many many posts about the keyboard messing up and the G1 just plain out falling apart as OP said. I think it was rushed, and Google should have based the Nexus One off of it. Who knows, maybe one day something will roll out.
I say all this and I'm stuck with a myTouch. :| I've actually considered selling/trading it for a G1. My myTouch is just in horrible condition from so many drunken nights, lol.
GinoAMelone said:
Almost. Lose the chin and have the button-area be part of the slidey-bit w/ the screen.
Click to expand...
Click to collapse
I disagree, I love the chin and the fact the buttons are separate from the screen, it allows you to easily use those buttons/trackball with the keyboard open.
d3v14n7 said:
I disagree, I love the chin and the fact the buttons are separate from the screen, it allows you to easily use those buttons/trackball with the keyboard open.
Click to expand...
Click to collapse
The main problem I find with the "chin" isn't so much that it sticks out front, but that when the phone is laying flat on a desk, the "chin" section is lifted up. When you try to push a button, the thing pops up like a rake hitting a coyote in the head when he's trying to catch a roadrunner.
After seeing so many cracked screens I want my new phone to have a folding body with an inward facing screen when closed.
Also:
OLED screen
2 cameras
USB host
Infrared (handy sometimes)
iPhone destroyer beam

[Q] My only concern about the Epic

I'm pretty content with my Epic so far. I've had it since November and have had no major issues with it and any I did have I was able to fix (no gps after flash, fixed thanks to Epic community, unresponsive screen orientation, fixed thanks to epic community again).
But I'm noticing a potential problem that I'm afraid no one here will be able to fix.
One of the minor gripes I have with my Epic is that whenever I press the top right button on my phone to either lock or unlock it, I ever so slightly apply some pressure with my fingers as if I wanted to push the screen up to slide out the keyboard. The amount of pressure my fingers are giving is minuscule but I'm already noticing that my phone no longer is as firm as it was 90 days ago.
This troubles me because I hardly ever use the keyboard, in fact, I only used it several times the first month to try out some emulators but gave up on it because the keyboard just isnt that great for it. My fear is that this phone is going to get as loose as the epics you find at the Sprint stores in less than a year!
Dont get me wrong, I dont expect the sliding mechanism to be strong forever, but I am pretty surprised that the phone is already feeling loose and I dont even use the physical keyboard
My question to you all is are any of you experiencing the same problem? How about those who use the keyboard frequently? Is there any way we can "re-tighten" whatever it is that is getting loose??
My phone is only 2months old and when the keyboard is shut and you look at it from the volume side I have a huge gap there. The slider is a little loose not to bad. My problem is just the gap issue. If I press on the left side of my screen you can literally see the left side of the screen go down due to that gap. I'm gonna be exchanging it soon I just don't feel like it cause my setup is finished and I just dont feel like doing it again.
I notice the epic case set helps it from feeling as loose now.
Sent from my SPH-D700 using XDA App
musclehead84 said:
My phone is only 2months old and when the keyboard is shut and you look at it from the volume side I have a huge gap there. The slider is a little loose not to bad. My problem is just the gap issue. If I press on the left side of my screen you can literally see the left side of the screen go down due to that gap. I'm gonna be exchanging it soon I just don't feel like it cause my setup is finished and I just dont feel like doing it again.
Click to expand...
Click to collapse
You can backup your data to your pc..and when you get your new epic just throw it back in.
Sent from my SPH-D700 using XDA App
It is what it is...
There are multiple causes for the screen wobble effect, and once it gets loose, much like a fine woman's _____, there's not much you can do to fix the situation. I've read on here how people have taken their epic's apart to try and tighten the slider but it's just not possible unless you send it back to samsung to have them do it. However, there are a few solutions insofar as mitigating one's "noticing" it on a daily basis. Both the Otterbox and Seidio Active X are nice cases and once they are attached, there is not really any screen wobble effect due to the way the cases fit. Although, what most people don't realize is that most of the cheap cases that are available for the epic (including the ones at the sprint store and the non-platinum series cases at best buy) are actually to blame for creating the gap between the screen and keyboard in the first place. The way that they clip on to the phone is not very well thought out like on the more expensive cases and the clips sometimes overlap and are simply thicker than they need to be on most of the cheapo cases. I learned this the hard way with my first epic and when I figured it out it was still within the 30 day trial period Sprint gives you with their phones. So i took it back under "false pretenses" and told bestbuy that the earphone speaker quality was ****ty compared to my "friends" Epic and that i wanted to get a different Epic. I've been very careful about which cases I use on my phone from that point on. The Seidio innocase and active x, platinum series, and otterbox cases are all the ones i know for sure that won't cause a "gaping" effect on your phone. All the ones at the sprint store have a negative impact and even the otterbox does just a tad, mainly due to the side clips on the top bezel that clipon by the top row of numbers on the keyboard.
anyways, that's my 2cents

Motomaker Quality Control Issues

First off let me say I love this phone, I really do but Motomaker has been leaving me a little sad.
So I started off by getting a 16gb model straight from AT&T since I'm not a patient person but after a bit I wanted 32gb so I sold the 16 and made one off contract on Motomaker.
The first Motomaker phone I got had scratches and dents on the screen bezel and it also looked like it had issues with the fusing as some of the plastic seemed to have gotten well into the screen.
I got a replacement and their advanced RMA was great and incredibly fast, however, the second one I got has a different issue. The power button on the new one doesn't seem to be seated right and sits lower than my previous two as well as being harder to press and not giving good tactile feedback..
Looks like I'm going to have to RMA again once I get the money back on my credit card.
Moto X you are amazing but something with the quality control is a bit lacking.
I had similar issues with my first phone. The power button was seated the same way you described, making it very difficult to actually use. The volume rocker was the exact opposite though, the whole button wobbled within the phone's frame, making it feel cheap. I requested a RMA saying that I wanted to swap colors, and only changed my accent color. The buttons on this phone are much more firm/usable.
I hope whatever issues there are down in Texas can get resolved soon. I really like this phone and Motorola to succeed but QA problems will give it a bad rep.
They didn't seem to care when I told them the damage I think if you bother calling they will change it.
i hope they get it right. mine came in with no issues. so they are capable of getting it right the fist time lol. i totally agree that they have issues though, my brother's veizon pre-order led is not near as flush as the one on my phone.
The Rogers ones I've seen (assembled in China) including mine are all flawless.
The one I got (no customization, Verizon) *works* fine but on the front-facing camera, I've noticed the felt ring is not seated correctly and creeping over the lens a little. Although I doubt Moto would give me an rma, it seems like a manufacturing defect.
Sent from my Moto X
scorpion667 said:
The Rogers ones I've seen (assembled in China) including mine are all flawless.
Click to expand...
Click to collapse
They probably hire people with small hands for better precision type work
Elisha said:
They probably hire people with small hands for better precision type work
Click to expand...
Click to collapse
Yap, 10 & 12 year olds have tiny fingers, got to love foxxcon
Sent on my Moto X
I have a t mobile one and noticed it has a small scrape on the bottom back and a few plastic molding issues.
I am actually returning it now since I noticed there's eBay sellers selling black and white xt1058 models that are unbranded for significantly less. Made in China units but I figure I'll save $120 over an american unit and be fine with it. I'm in refarmed area so I don't care about the aws hspa and the non att xt1058 can have unlocked boot loader / no bloatware. Maybe the Chinese have better quality
At least, each time you replace a moto maker device you get a $10 play store credit (unless they fixed that loop hole) and supposedly the return process is easy and if you can float the $650 hold you can get it replaced without any down time.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
QA problems? Unfortunately good chance it's because of the union workers down there. While majority are excellent, there are many with "I don't give a crap, union has my back no matter how crappy my work is" attitude.
Sent from my Galaxy Nexus using Tapatalk 4
herzzreh said:
QA problems? Unfortunately good chance it's because of the union workers down there. While majority are excellent, there are many with "I don't give a crap, union has my back no matter how crappy my work is" attitude.
Sent from my Galaxy Nexus using Tapatalk 4
Click to expand...
Click to collapse
Maybe not Texas is a right to work state
Sent from my LG-E988 using xda premium
I know what you guys mean with the manufacturing issues. My rear camera literally has a little piece of Texas in it. I noticed when I pulled it out of the box that the lens had a little speck of tan on it. However it won't wipe off, and closer inspection revealed it was on the other side of the lens!
Doesn't seem to affect the pictures at all though, so I doubt I'll get it replaced over that. But I'm sure gonna bring it up if I ever try! :fingers-crossed:
Theron113 said:
I know what you guys mean with the manufacturing issues. My rear camera literally has a little piece of Texas in it. I noticed when I pulled it out of the box that the lens had a little speck of tan on it. However it won't wipe off, and closer inspection revealed it was on the other side of the lens!
Doesn't seem to affect the pictures at all though, so I doubt I'll get it replaced over that. But I'm sure gonna bring it up if I ever try! :fingers-crossed:
Click to expand...
Click to collapse
Same here
XT1060 said:
Same here
Click to expand...
Click to collapse
Mine's not as bad as yours but I have a small speck at the bottom right of the circle. I'm willing to let it go since it's not noticeable except you look close enough and at the right angle under light.
Theron113 said:
I know what you guys mean with the manufacturing issues. My rear camera literally has a little piece of Texas in it. I noticed when I pulled it out of the box that the lens had a little speck of tan on it. However it won't wipe off, and closer inspection revealed it was on the other side of the lens!
Doesn't seem to affect the pictures at all though, so I doubt I'll get it replaced over that. But I'm sure gonna bring it up if I ever try! :fingers-crossed:
Click to expand...
Click to collapse
So, my display is going out...:crying: It will intermittently flash on and off for no reason. The digitizer still works, even when I can't see anything I can still feel it vibrating in my hand. This also pretty much breaks Active Notifications. :crying: And Touchless Control..:crying: And twist-to-camera...:crying:
Needless to say, I have a new one coming from Verizon tomorrow. And I definitely told them about the speck in my camera too. The lady at Verizon had the nerve to ask me if I had a memory card for my phone. I told her that unfortunately the designers at Motorola had taken that option away from me. I hope they at least send me some screen protectors or something for my trouble......because I thought I was doing a good thing supporting the workers in Texas.
UPDATE
My display went the rest of the way out last night. This resulted in a useless paperweight that vibrated occasionally. The worst part of it, is that I couldn't use Motorola Migrate to get my old info! Because the screen wouldn't come on, I couldn't see the QR code to start the wifi transfer. HOWEVER, after much anguish and profanity, I managed to get Moto Migrate to connect WITHOUT THE QR CODE!! I couldn't find this method listed in any literature, but it worked for me, and my non-displaying screen.
1) The old Moto X must have the NFC on! That is the key to this. Thankfully, I had NFC on prior to my screen breaking, so I didn't have to blindly try and toggle it on. Also turn it on for the new Moto X
2) If you're like me, and your screen won't work, then you can't see the Migrate app. Thankfully, you can just use Touchless Control to open it. "Okay, Google Now. Open Migrate" Give it 15 seconds and it should be open.
3) In my case, I had to tell my new phone to accept Migrations, and tell the old phone to send them. Settings in the top right corner, and then a toggle button in the middle of the screen. (I just used my new Moto X to judge the rough placement on my broken one, and it was easy)
4) Finally, touch the backs of the phone together, and tap the screen on the NEW Moto X to use Android Beam which pairs the phones and begins Migration of old info!
Note: I got the pairing backwards the first time, and sent settings from my new phone to my old one. This didn't appear to hurt anything, but that's why I specify you make the new Moto X the receiver.
Sorry for the HUGE update guys, but this is important information. It saved my ass, to mention an enormous headache. So I hope that anybody else trying to pair Motorola Migrate with a broken screen finds this post!! :good:

Categories

Resources