Related
Hello all
I had a leak in a roof, when I returned home my Streak was sat in a puddle of water. It's affected only the four small battery terminals, but unfortunately due to subsequent shock damage, one connector has snapped out of place and is no longer springy.
As I can't see any visible screws I have no way to assess this myself, but does anyone know if I would be able to order the small battery connector part and fix this myself?
The water damage hasn't affected anything else so I know it's just the one battery terminal that's broken.
Thanks in advance for any help anyone can provide.
You might be covered under your house insurance, if not the cheapest option would probably be to buy a broken one off eBay for parts.
Thanks for the response.
There's no insurance on the phone - Dell customer support requires a tag number and of course this isn't a desktop PC.
Does anyone know where I can simply buy the part I require, just the battery terminal box?
This maybe a dumb question... But I don't really know about the technology, only about how to do the mod.
I have a Qi enabled inductive charging plate. Some iOnic brand or something... cheap, maybe, but it works.
Now if I get the palm pre back cover and put it's insides on a mod for my defy, will it charge with the Qi plate? Or is it only compatible with the touchstone dock?
I really don't know what "Qi" is, or what technology the touchstone uses for the inductive charging... So I was hoping someone could give me a heads up on this before I go ahead and buy the pre cover.
Tx,
Pradeep
Has anyone thought about stuffing the touchstone coil into the nexus4? It sounds stupid i know since the n4 already has wireless charging built in, but the chargers are expensive and hard to find while the touchstone chargers are cheap and plentiful.
peachpuff said:
Has anyone thought about stuffing the touchstone coil into the nexus4? It sounds stupid i know since the n4 already has wireless charging built in, but the chargers are expensive and hard to find while the touchstone chargers are cheap and plentiful.
Click to expand...
Click to collapse
The Qi protocol requires that the receiver send a handshake to the transmitter to start charging. If a non-Qi device is on the plate, then it will do a start and stop every 20 sec to poll for the signal. I am working on changing the Touchstone coil to a Qi transmitter coil and see what happens. I received the Qi coil, Qi inductive charging sleeve (for testing) and waiting on a Palm touchstone sleeve. My concern is that the touchstone without the Qi communication on charging status may overheat the N4 if it doesn't stop the power transmission properly.
terracode said:
My concern is that the touchstone without the Qi communication on charging status may overheat the N4 if it doesn't stop the power transmission properly.
Click to expand...
Click to collapse
People have put touchstone coil's in other phones and had no issues, i don't see how it would be any different here. There are 4 contact points that connect the qi coil and nfc on the rear cover, attach the touchstone coil to 2 of them and hope you can close the cover with everything inside.
peachpuff said:
People have put touchstone coil's in other phones and had no issues, i don't see how it would be any different here. There are 4 contact points that connect the qi coil and nfc on the rear cover, attach the touchstone coil to 2 of them and hope you can close the cover with everything inside.
Click to expand...
Click to collapse
He's doing the opposite; he's replacing the coil in the touchstone charger with a QI charging coil.
I connected the Qi compliant coil to the Touchstone board and it didn't recognize the Qi receiver so it didn't start energy transfer. I then moved the thin wire coil that the Touchston uses to sense a Palm Receiver to above the Qi coil. The transmitter didn't start with a Qi receiver, but did recognize the Palm receiver and started energizing the coil. Issue was the voltage was very low due to the mismatched coils (Qi transmitter and TS receiver). I need to take apart the Touchstone receiver to see what it uses to activate the transmitter. More tinkering is needed.
I think QI controls the charging level from the phone, by communicating back to the charger. It may not be a good idea to disable this mechanism by swithing a charge coil on manually (though I'd think that the phone would not charge at all, then).
If you want to try, I think QI uses 141 KHz. Supply that to a coil at the correct power and see if it charges.
jutezak said:
I think QI controls the charging level from the phone, by communicating back to the charger. It may not be a good idea to disable this mechanism by swithing a charge coil on manually (though I'd think that the phone would not charge at all, then).
If you want to try, I think QI uses 141 KHz. Supply that to a coil at the correct power and see if it charges.
Click to expand...
Click to collapse
I am actually doing the opposite. The Qi coil is on the transmit side attached to the touchstone charger power board. I need a way of sending a proper signal to the Palm Touchstone so that it energizes the coil. The Qi receiver doesn't have the proper interface to send a signal to the Touchstone to power up.
$50 is hardly expensive.... Wall Mart wanted $50 for a plug in travel charger for my galaxy tablet. Just find the lg one.
Sent from my Nexus 4 using Tapatalk 2
Qi coil
terracode said:
I am actually doing the opposite. The Qi coil is on the transmit side attached to the touchstone charger power board. I need a way of sending a proper signal to the Palm Touchstone so that it energizes the coil. The Qi receiver doesn't have the proper interface to send a signal to the Touchstone to power up.
Click to expand...
Click to collapse
So are you able to replace the qi coil successfully to TS?
For someone who want's multiple docks around, $50 does add up. For someone like me who has 2 or more touchstone chargers laying around from previous mods/palm phones this would be useful.
I've tried to do the following to my Nexus 4, but couldn't get off the back cover without damaging the phone (I could get everything but one corner of the phone to pop open, I noticed I was beginning to damage the body a bit and stopped trying).
Mind you, the following needs to be used with a case; works best with rugged cases/hard cases.
If anyone is able to open their phone up you can try my following idea:
1. Remove the back of the phone
2..There should be 4 pins, 2 for NFC, and 2 for the QI coil.
3. Use a voltmeter to find out which pin is positive and which is negative.
-- I am not sure if the touchstone coil could fit INSIDE the phone, so I assumed it would not fit, and came up with this solution--
4. Using copper tape (if you've modded your GNEX before, you probably have some left over) stick it onto the pins, and lead them outside of the back cover, wrapping around so you see the copper tape on the OUTSIDE of the phone
5. Close the phone back up, the copper tape should now be hanging outside of the side of the phone.
6. Get your touchstone coil and tape/adhere it to the inside of your selected case.
7. Take your copper tape yet again and solder it to the leads of the touchstone coil, and position the copper tape so it touches the existing tape (from the nexus) when you put the case onto your phone.
That's it. The touchstone should be thin enough so that it doesn't interfere with the fitting of the case. This was the situation for my previous two mods with Galaxy Nexus's, the fit of the case was no problem. (Otterbox Commuter, and SGP Neo-Hybrid).
DDRFAN said:
For someone who want's multiple docks around, $50 does add up. For someone like me who has 2 or more touchstone chargers laying around from previous mods/palm phones this would be useful.
I've tried to do the following to my Nexus 4, but couldn't get off the back cover without damaging the phone (I could get everything but one corner of the phone to pop open, I noticed I was beginning to damage the body a bit and stopped trying).
Mind you, the following needs to be used with a case; works best with rugged cases/hard cases.
If anyone is able to open their phone up you can try my following idea:
1. Remove the back of the phone
2..There should be 4 pins, 2 for NFC, and 2 for the QI coil.
3. Use a voltmeter to find out which pin is positive and which is negative.
-- I am not sure if the touchstone coil could fit INSIDE the phone, so I assumed it would not fit, and came up with this solution--
4. Using copper tape (if you've modded your GNEX before, you probably have some left over) stick it onto the pins, and lead them outside of the back cover, wrapping around so you see the copper tape on the OUTSIDE of the phone
5. Close the phone back up, the copper tape should now be hanging outside of the side of the phone.
6. Get your touchstone coil and tape/adhere it to the inside of your selected case.
7. Take your copper tape yet again and solder it to the leads of the touchstone coil, and position the copper tape so it touches the existing tape (from the nexus) when you put the case onto your phone.
That's it. The touchstone should be thin enough so that it doesn't interfere with the fitting of the case. This was the situation for my previous two mods with Galaxy Nexus's, the fit of the case was no problem. (Otterbox Commuter, and SGP Neo-Hybrid).
Click to expand...
Click to collapse
Was this simply the metal coil or the entire assembly including board from a Pre charging cover? very Interested as I have a Nexus 4 I will be receiving Monday
singularityq said:
Was this simply the metal coil or the entire assembly including board from a Pre charging cover? very Interested as I have a Nexus 4 I will be receiving Monday
Click to expand...
Click to collapse
You should only have to replace the metal coil.
OP, a simple google search would have sufficed http://www.webosnation.com/nexus-4-gains-touchstone-charging-thanks-clever-hacking
hi guys - i foolishly lent my streak to my sister for a while as she had broken her iphone and after a couple of weeks she called me up to say that it wasn't charging and was dead. I figured she'd just done something daft and it would be an easy fix but i got it back today and she's managed to pretty much destroy the pdmi connector (as well as break the rear door catch!) . Phone still works fine as i charged up the battery on the dock and fired it up.
So, is it possible to change the connector or is it soldered to the motherboard? If it's soldered i'm guessing it's a pretty specialist job to get it replaced? Or alternatively, is anybody interested in it for spares? It's in perfect condition as it's always had an invisible shield on it (just removed as it was getting a bit scabby) apart from the connector and rear panel catch....if there is any interest i can pop a thread on the marketplace.
Cheers
Niall
It's soldered. There may be companies which can replace the connector, but I'm not aware of them. You may want to look into replacing the motherboard by purchasing a Streak with a broken screen.
aye, that's what i thought...i've ordered up a connector as it looks like it's the plastic bit that disappeared so maybe be able to refit that from a new one? If not i'll maybe see if a phone repair shop will solder the new one on. Or has anybody got a smashed streak lookin for a new home??
Hey guys
Like many others my usb gone bust and my advent tn7 just became useless. Ive went to curries and explained about how this is a common issue but they dismissed it saying a broken charger port is my fault. I have searched several forms but still havent found any way of fixing it. Does anyone know how to get my tab to charge? Ive tried opening the tab but one side of it doesnt seem to come off. What are my options if any? Any help will be greatly appreciated. Thanks.
Abdur Desai said:
Hey guys
Like many others my usb gone bust and my advent tn7 just became useless. Ive went to curries and explained about how this is a common issue but they dismissed it saying a broken charger port is my fault. I have searched several forms but still havent found any way of fixing it. Does anyone know how to get my tab to charge? Ive tried opening the tab but one side of it doesnt seem to come off. What are my options if any? Any help will be greatly appreciated. Thanks.
Click to expand...
Click to collapse
The best option would be to take it to a repair shop... it might cost you $50, but hopefully they can replace it with the right USB port (the one Nvidia used is slightly different from most micro-USB ports you see on devices, so it's not a very snug fit, hence the problem.)
I have the evga tn7 that i bought from newegg. Would they still honor my warrenty on the broken charging port even though I have my bootloader unlocked?
jon7701, I was thinking the same thing. I bought mine a couple of months ago and the charging port is being a little finicky.
share_needles said:
jon7701, I was thinking the same thing. I bought mine a couple of months ago and the charging port is being a little finicky.
Click to expand...
Click to collapse
Mine has to be plugged in a certain way or it refuses to charge outright. Even when I have it in the proper way it might not charge at all but reports its charging. The strange thing is that it can still detect what type of charging method (usb or AC) im using even though it wont charge.
I was able to fix my EVGA Tegra Note 7 usb connector using a re-flow soldering station (the type that uses hot air to melt solder), and it only took about 30 minutes. If you know an electrical engineer or serious electrical design enthusiast, they may have one. The problem is caused from the solder joints on the usb connector breaking. All I had to do is re-melt the solder and the problem was fixed. You cannot use a normal soldering iron because there are other components in the way. This happens on the Tegra Note because Nvidia specified a Micro-ab type connector instead of the Micro-b connector that most phones have. This allows accidental upside down insertion to damage the connector.
All you have to do is snap the plastic case apart, carefully remove the small circuit board that has the usb connector. The solder joint appears solid, but I was able to see the crack with a microscope and a trained eye. Use hot air to melt the solder, and resemble. Now I am just careful to plug the cable in right side up. If it breaks again, I am replacing it with a Micro-b connector.
I like having a re-flow soldering station. Every hacker should have one for replacing surface mount components and more extreme hacks (like upgrading internal flash, etc.).
sorry for necroing this post but i'm having the same issue. i've thought the same as you of replacing the port with a micro b. i have only one question: is there any problem with replacing it with a micro b? or no problem at all
Digging up this old thread to post link to UK service for Nvidia Tegra Note 7 Micro USB Charging Port Repair Service,
Here:- http://www.mobiledeviceworkshop.co....o-usb-charging-port-repair-service-3080-p.asp
Charge of £29.00 all inclusive of return delivery (+£5.00 for next day delivery)..
EDIT: Think this is same part for Nvidia Tegra note 7 (ebay, £1.29).
New HP SLATE 7 HD Replacement Micro USB DC Charging Socket Port Connector
http://www.ebay.co.uk/itm/New-HP-SL...cab7f36&pid=100005&rk=6&rkt=6&sd=131877863523
EDIT: Some spare parts, Cherry Mobile Tegra Note 7 Spare Parts & Accessories
(Indian version Tegra note 7, presumably mostly same as Advent, but seems to have built-in internet, prices in Rupees)
https://www.maxbhi.com/cherry-mobile-tegra-note-7-spare-parts-and-accessories.html
Thanks
ad1876 said:
I was able to fix my EVGA Tegra Note 7 usb connector using a re-flow soldering station (the type that uses hot air to melt solder), and it only took about 30 minutes. If you know an electrical engineer or serious electrical design enthusiast, they may have one. The problem is caused from the solder joints on the usb connector breaking. All I had to do is re-melt the solder and the problem was fixed. You cannot use a normal soldering iron because there are other components in the way. This happens on the Tegra Note because Nvidia specified a Micro-ab type connector instead of the Micro-b connector that most phones have. This allows accidental upside down insertion to damage the connector.
All you have to do is snap the plastic case apart, carefully remove the small circuit board that has the usb connector. The solder joint appears solid, but I was able to see the crack with a microscope and a trained eye. Use hot air to melt the solder, and resemble. Now I am just careful to plug the cable in right side up. If it breaks again, I am replacing it with a Micro-b connector.
I like having a re-flow soldering station. Every hacker should have one for replacing surface mount components and more extreme hacks (like upgrading internal flash, etc.).
Click to expand...
Click to collapse
Thanks a lot for your correct advise.
I had a long battle getting my Xolo Tegra Note fixed in Pune.
Xolo service center people told me that because I have down graded my tablet to KitKat, now motherboard is gone. After that I went to local mobile repair shop, he told me it's very difficult fix this as the joint are very small and soldering can damage other things as well.
After visiting a few repair shop in Pimpri market, I found a guy who did it. I found the same issue of minor crack which he found using multiple magnifying glasses.
It's better to visit a good repair shop not a small one as the issue won't be visible without magnifying glasses.
Let me know if anyone wants to get it fixed in India, Pune. I will share the mobile shop address.