while I am using WiFi with free access I have no problem, but when trying to use WPA PSK AP with TKIP password it is impossible to go through it is trying to connect again and again but w/o success..
Passwd is correct - it is my home net AP is OK, rest of home devices is connected.
It used to work, but after back up installation it started to do this
Any idea what I am doing wrong?
Related
Hi,
Where I work I've access to the WLAN with my LPT. The WLAN is configured with MAC address access list.
Is it possible to change the MAC Address of my P3600 to access the WLAN?
Thanks
Sbay
No absolutely not possible. You should let your mac adress added to the network.
hello, i don't see the MAC address in settings and the wi-fi doesn't turn on now.
What can i do?????
Help!
and, as i enter in bootloader, after USB i read in Red: WLAN ERROR.
what can i do??
Even if it were possible to change the MAC address, which can be done for your laptop, your employer obviously has a reason for not having the WiFi open to all who have the WEP/WPA key and circumventing this may well not be looked on favourably. Best suggestion is to register your PDA with the IT department so it works without hacking anything
yah
I do agree with deedee
Did someone find the solution to restore WLAN EEPROM?
lambda1976 said:
hello, i don't see the MAC address in settings and the wi-fi doesn't turn on now.
Click to expand...
Click to collapse
I have almost the same problem...
I have flashed WM6.5 ROM, then decided to return to native WM5.0 ROM. In bootloader there was the same error.
lambda1976 said:
in bootloader, after USB i read in Red: WLAN ERROR.
Click to expand...
Click to collapse
But my device was flashed successfully. After that Wi-Fi was dead
Reflashing does not help... Wi-Fi is as cold as a key
I have a HTC HD2 running on Cyanmod7
Having trouble getting on school's wpa eap
I have the correct setup but when it connects.. it doesn't pass authentication for a long time and when it does it says connecting then disconnects
Some other posts have told me to do this below, but when i copy the file onto my phone, I cant copy it to sysbin part of the phone and only on my sd card
help
Hi guys...am only geting wifi at home...not workin at my brothers house. it keeps conecting and disconnecting and authenticating..however when i boot the phone from windows the wifi works ok at his house!...i was using tytung v 2.8 gingerbread... i have made a fresh instal using tytung v 3.0 gingerbread but the problem is stil there.....using a htc hd2 running andrtoid from sd card.........please could somebody shed sum light!!!...
control wifi security type of router. wpa is better for android. you may have problems with wep security
...after the phone has scanned for wifi it brings up WPA/WPA2 PSK alongside the network name...after keying in the security password it just wont connect.......keeps connecting and disconnecting......seem to be having the same problem at me mates house aswell!!
shaz999 said:
...after the phone has scanned for wifi it brings up WPA/WPA2 PSK alongside the network name...after keying in the security password it just wont connect.......keeps connecting and disconnecting......seem to be having the same problem at me mates house aswell!!
Click to expand...
Click to collapse
Try a trila and error - disable security on the router completely for a few minutes and see if it stays connected. If it does stay connected without security, download the latest tytung kernel package from his thread, extract the wpa_supplicant from /system/bin and push it to the /system/bin in your android. See if that helps.
ok..thanks for your reply... i will try this out...if it does the trick you will have to advice me on the system bin thing!!!!!.........sorry i am new to android romming...might possibly drop you a email....
Hi.
I have tried several ways of changing my wifi hardware address but always with the same results: I can't connect to my AP if I've changed the MAC. I'm using Franco Kernel and stock 4.2.2 ROM (rooted).
Anybody got it?
Thank you.
Does your AP has MAC filtering enabled? Might want to go in and check if this is enabled on your router.
Or, you can use aircrack tool, airodump, to check which MAC addresses are already connected to your AP, and use on of these (I hope this is for your own AP....and you are not stealing wireless from your neighbor )
I am trying to connect to a WPA2 EAP access point on my Android TV (Philips) - Android 9
After some research, I found this repo on Github: https://github.com/nitantsoni/Enterprise-Wi-Fi
However, I still can't connect to AP. Getting status Disconnected/Scanning or Disconnected/Disconnected.
On my phone (Android 8) it's working. Using same credentials and settings.
My Access Point
EAP-method: PEAP - None
CA-certificate: Do Not Validate <--- can't find this option on the app. Could this be the issue?
Identity: ......
Password:......
Hope someone can help me out. Maybe other apps that could help me out?
Thanks in advance.