Database Users

XDA mini PM10A dead

how to fix my phone XDA mini PM10A dead

First off, you're a little vague on details, don't you think?
Second of all, you're phone is not a Charmer. It's a Magician; moving to the right place.

the phone not power.
any solution to check if hardware problem or software?

Are you saying that the battery isn't charging, or the unit itself isn't turning on?
Can you get it to go into the bootloader mode?

if you see "something" on the screen such as "USB Ver.1.1" , then its no fault at all.
you can simply flash a rom.
but if it doesn't charge (you don't even see the red light)
go! get it repaired, hardware has gone bad.

mariner_heart said:
if you see "something" on the screen such as "USB Ver.1.1" , then its no fault at all.
you can simply flash a rom.
Click to expand...
Click to collapse
My Magician, will not connect in the bootloader mode (dot detected by the RUU). Whenever I use the No_ID RUU, it keeps saying that the upgrade tool, isn't for my device (although it was downloaded from the official site).
Any suggestions?

hi
hi every bady.my xda o2 its on german language.how i can fixed on english language.

mariner_heart said:
if you see "something" on the screen such as "USB Ver.1.1" , then its no fault at all.
you can simply flash a rom.QUOTE]
Hi, can any1 explain to me what it means by "flash a rom"?
I'm having the same problem, my screen shows "USB Ver 1.0"
Please help
Click to expand...
Click to collapse

touch dual stuck in tri-colour

hi folks,
I am in real trouble. while trying to unlock i hard-resetted it, but now the phone is got stuck in tri-colour mode, I don't know what to do. Basically now it went like funny. it would not turn on, while u put it on to charge it will show the tri-colour and also if i leave it on charge it is getting hot. Do u guys recon any chip to be hitted?
if u need to know anything else pls let me know.
Regards

have you loaded a rom on to it?

hi there,
Not actually, basically one of my friend tried to unlock it in first place. I don't really know what he did with that. but the phone is totally dead now. If anyone can help me that will be highly appreciated because this phone is not mine, this is customer's.
If he tried to put rom on it what consequence would happen and is there any way to get out of there?
Regards

windows software gone
Hello there,
It's me again. I think on this the software is missing. Because if i connect it to the computer it brings on the tri-colour and shows usb connection. So, the software i think missing. If anyone can give me a link how to put the software in there i will appreciate that. But still i am not pretty sure why it is getting hot while charge and why it is not turning on even it charged.
thanx

NetrunnerAT said:
If you are stuck in the bootloader, download MTTY, connect via USB (Activ Sync must disabled via USB!!!) and type the Command "boot"
Click to expand...
Click to collapse
Try it ... search for Tri-Color or Bootloader Mode.

still no solution
No success mate. I have downloaded the mtty. and it says usb port cannot open. but if i go to com3 it allows me to write something over there. i write boot on it but nothing happening , and actually i don't know what would happen?
regards

Try it again ... again ... again ... you need to connect VIA USB!!!!!!!!
If he cant Open ... shut down your Activ Sync!
If you cant ... use a other PC. Vista have some bugs and Windows XP 64 too.

how to upgrade the bootloader?

does anyone know how to upgrade the bootloader on the himalaya at the moment mine reads at the top of the screen SERIAL and at the bottom V1.01.
I have a file which i think is a upgrade [boot_1.06.nb0]
but i have to need to know the do's and dont's as i would think this would be if done wrong brick my himalaya?
any help or links would be thankfull?

advanced15 said:
does anyone know how to upgrade the bootloader on the himalaya at the moment mine reads at the top of the screen SERIAL and at the bottom V1.01.
I have a file which i think is a upgrade [boot_1.06.nb0]
but i have to need to know the do's and dont's as i would think this would be if done wrong brick my himalaya?
any help or links would be thankfull?
Click to expand...
Click to collapse
The only one question is
Why the hell you want to do that?
I have 1.01 also on my second today-use himalaya and it is really stable and works same as 1.06, but has some debugging output in mtty which is so useful
I tried also to upgrade it and I failed.

I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.

mikeymcmk said:
I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.
Click to expand...
Click to collapse
Hay mickey tell me that are you able to sync data or contects,msgs etc with system without disconnecting ?????????
or sometimes connection disconnects automatically ????/
if yes then put something stable thing in between data cable & device.
reply soon

KAASHP said:
Hay mickey tell me that are you able to sync data or contects,msgs etc with system without disconnecting ?????????
or sometimes connection disconnects automatically ????/
if yes then put something stable thing in between data cable & device.
reply soon
Click to expand...
Click to collapse
if anybody have same problem do as per my suggestion
put something in between data cable & device if you connect it without disconnection then it works flash the rom after putting it in bootloader mode

Don't do it
the bootloader is the main program which executes the system programs so avoid to upgrade bootloder.
the result will be permanent damage to your lovable device...
it can't boot more. so be careful.
no need to upgrade it as per my suggestion.

[Q] USB ONLY ALLOWS WP7 FLASH/no charge/no usb in bootloader

hello, guyz!
this is a full story of mine after wp7.8 by H2OWNER FLASH AND BATTERY GOT DEAD:
"HD2Owner, dear,
it's not to abuse as we know all the risks we take testing roms, just asking for your advice:
1. I did install your latest rom
2. after some time it stopped charging at all
3. the problem is the phone got unable to charge under sd android as well.
4. at the end of story battery got dead - can't load magldr.
5. managed to direct power on it via red/black cables of usb to +/-
6.but the problem still the same - I can't charge battery via phone
7. and even more - can't enable usb via bootloader (tricolor) - serial only:
- usb flasher works only with wp7 rom install;
- magldr, hspl, task29 flash via usb flasher fails with critical error 0000001;
- naturally, can't flash winmo;
- usb storage works well.
I'm completely lost what to do
h2owner, dear, I made grand research over google and xda.
can add only, that in addition I've already tried:
1. nbh of the default os flashed fine
2. pins in phone battery slot are properly aligned
3. I did try to clean both usb cable and usb port
and issue is still here - no charge under any os/no usb in bootloader/usb mass storage works fine/can flash only any wp7 build/the rest "flashes" lead to no usb connected
and what I can say is only that this is almost definitely connected to the usb power management of the phone by your wp7.8 build.
thus, that would be great if you know what to do and how to fix it. probably, reflash your wp7.8 updated with this fix?"
as for the moment I've managed to flash original wm3.14 rom via sd.
still no usb in bootloader, no charge.
don't know what to do yet.
don't even say usb is broken -
THE MAIN POINTS ARE THAT
1. I STILL CAN FLASH WP7/7.8 VIA USB FLASHER
2. I STILL CAN FLASH MAGLDR VIA USB FLASHER
3. BUT NOTHING MORE
4. AND USB MASS STORAGE WORKS AS WELL
5. UNDER WP7/7.8 STILL NO USB/NO CHARGE
the couple of thoughts to take in attention:
1. I did close zune while it's starting first time with wp7.8 by HD2OWNER under admin account
2. I did try another pc (win7, mine is w7 as well - same results, no usb)
please, post your suggestions, but remember - I CAN FLASH WP7/7.8 VIA USB FLASHER, WHICH MEANS HARDWARE IS OK.

okay, first news on the subject:
HD2Owner Today, 02:54 PM #3079
Recognized Developer - OP
Thanks Meter 1459
Posts: 1,947
Join Date: Oct 2009
Location: Neuhausen am Rheinfall
MORE INFO >
DONATE TO ME
important info related to usb2video:
usb mode is not changed back to zune/charge mode with a simple reboot.
you have to click usb2video appicon again and switch back to normal zune mode (with needed reboot).
otherwise, performance will stay choppy and device will never charge/connect to zune again.
WILL KEEP YOU UPDATED

this is going to be my personal blog alike..
okay, speaking with myself..
in order to have wp7.8 back, I need hspl and magldr..
then how to flash hspl now from spl 1.42 and without usb???
omfg.

hi dimdimdim !
this Thread & post for you only
i think must usb
try with this tool
http://forum.xda-developers.com/showthread.php?t=1090783
maybe can help you

boxmax said:
hi dimdimdim !
this Thread & post for you only
i think must usb
try with this tool
http://forum.xda-developers.com/showthread.php?t=1090783
maybe can help you
Click to expand...
Click to collapse
yes, I tried...but this is not more than interface for same magldr, hspl, recovery...method is not changed..
but thanks for suggestion!

Maybe is problem with usb drivers on your pc,try to reinstall them,tricolor screen won't recognize usb if you dont have drivers proper installed....

zexmunze said:
Maybe is problem with usb drivers on your pc,try to reinstall them,tricolor screen won't recognize usb if you dont have drivers proper installed....
Click to expand...
Click to collapse
I did try it on another pc...still no usb

This does sound like a hardware issue to me. I know you dont think it is an hardware issue, because some of the communications still work.
But the active driver determines the hardware id's that broadcasted. The drivers are mainly on OS level. Booting another OS would definitely solve problems in the problematic OS.
I think the one of the power-pins on your USB jack is broken.
The only other possibility that I can think of, but it is unlikely, is that Magldr somehow screwed up and interferes with the USB-power-management.
The Video-to-USB is unlikely the cause, because AFAIK it does not influence the power-management of the USB.
Heathcliff74

Heathcliff74 said:
This does sound like a hardware issue to me. I know you dont think it is an hardware issue, because some of the communications still work.
But the active driver determines the hardware id's that broadcasted. The drivers are mainly on OS level. Booting another OS would definitely solve problems in the problematic OS.
I think the one of the power-pins on your USB jack is broken.
The only other possibility that I can think of, but it is unlikely, is that Magldr somehow screwed up and interferes with the USB-power-management.
The Video-to-USB is unlikely the cause, because AFAIK it does not influence the power-management of the USB.
Heathcliff74
Click to expand...
Click to collapse
okay, if jack is broken, then I have only chance to send the phone to the service.
the point is that I'd like to know whether there is a way to go deeper, than OS level.
is that possible with tools, available at home? with cab for wm6.5 or nbh with drivers?
h2owner wrote it is not possible to charge the phone anymore if apply usb2video and not enable normal mode back again.
I can't say 100% I do not push usb2video once. I'd rather say I did it once and no more. and after that my battery got dead during a call.
thus, usb2video may get stuck on it's half way...
just to be sure - is there any option to apply some tool, which can go that deep into a hardcoded drivers?
if that was possible to get somehow wp7.8 back and apply usb2video again...but - no usb means no hspl..
by the way, JIC, isn't it possible to use usb2video cab on wm65?

dimdimdim said:
okay, if jack is broken, then I have only chance to send the phone to the service.
the point is that I'd like to know whether there is a way to go deeper, than OS level.
is that possible with tools, available at home? with cab for wm6.5 or nbh with drivers?
h2owner wrote it is not possible to charge the phone anymore if apply usb2video and not enable normal mode back again.
I can't say 100% I do not push usb2video once. I'd rather say I did it once and no more. and after that my battery got dead during a call.
thus, usb2video may get stuck on it's half way...
just to be sure - is there any option to apply some tool, which can go that deep into a hardcoded drivers?
if that was possible to get somehow wp7.8 back and apply usb2video again...but - no usb means no hspl..
by the way, JIC, isn't it possible to use usb2video cab on wm65?
Click to expand...
Click to collapse
Just tested for you: The phone DOES charge when USB Video Out driver is selected. I just switched back and forth and it charges always. Using HTC HD2 with exact same ROM as you used.
There are no such low level tools to look into drivers. At least, not for WP7 that I know of. But what do you expect to see? If you are booting Android, it uses Android drivers, with Android power-schemes. Completely different, but same problem. That proves for me, the problem is at hardware level. Any ROM flash or Hard Reset should always reset the USB mode/driver.
Maybe you can try to flash MagLdr on it (again). That is the only software-solution that I can think of.
Good luck,
Heathcliff74

Heathcliff74 said:
Just tested for you: The phone DOES charge when USB Video Out driver is selected. I just switched back and forth and it charges always. Using HTC HD2 with exact same ROM as you used.
There are no such low level tools to look into drivers. At least, not for WP7 that I know of. But what do you expect to see? If you are booting Android, it uses Android drivers, with Android power-schemes. Completely different, but same problem. That proves for me, the problem is at hardware level. Any ROM flash or Hard Reset should always reset the USB mode/driver.
Maybe you can try to flash MagLdr on it (again). That is the only software-solution that I can think of.
Good luck,
Heathcliff74
Click to expand...
Click to collapse
okay, this is that kind of proof I'd want to have before I send the phone for repair.
thank you, Heathcliff74.

dimdimdim said:
okay, this is that kind of proof I'd want to have before I send the phone for repair.
thank you, Heathcliff74.
Click to expand...
Click to collapse
You can try to reinstall Magldr, although I don't think it will help.
Just to be clear: Information I gave is the best of my knowledge, but it is provided "as is". I don't take responsibility of any costs that arise from using the provided information, even when that information proves to be incorrect afterwards.
That said, I hope they can fix it for you. But I guess a good repair man can easily determine if the usb jack is indeed broken.
Good luck,
Heathcliff74

Heathcliff74 said:
You can try to reinstall Magldr, although I don't think it will help.
Just to be clear: Information I gave is the best of my knowledge, but it is provided "as is". I don't take responsibility of any costs that arise from using the provided information, even when that information proves to be incorrect afterwards.
That said, I hope they can fix it for you. But I guess a good repair man can easily determine if the usb jack is indeed broken.
Good luck,
Heathcliff74
Click to expand...
Click to collapse
I did reinstall magldr when still had hspl 2.08...but now I'm on spl...
thus..happy repairing!
I did already replace usb socket half of year ago, that's why I did struggle so much for not hardware issue

Battery charging problem

Hi guys, i have installed the motion rom but i have one problem the cable of the charge it removes and it gets back(plug and unplugged) i have tried most cable but the problem is not fixed...i have an answer if i install a stock rom with odin the problem can be solved? Sorry for my english and thanks for all help me..

If you mean that your device cant be charged by anyway try reflashing the ROM i've had this problem too and a reflash fixed it

Axell. said:
If you mean that your device cant be charged by anyway try reflashing the ROM i've had this problem too and a reflash fixed it
Click to expand...
Click to collapse
I have tryed to reflashing the rom but the problem of the charge is not fixed...now i try to install the stock rom with odin. Thanks for you answer

No i can t install the stock rom because the usb on pc won t connect i am so tired how i can fix guys? Pls thanks for help me

AnimeCS said:
No i can t install the stock rom because the usb on pc won t connect i am so tired how i can fix guys? Pls thanks for all help me
Click to expand...
Click to collapse
Seams that the USB port on the phone is sustained a damage a one of the second pair of pins is either burned out or broken & first pair is not in a very good shape either. So the only real solution in your case is to get it to the repair service & get it fixed by replacing the USB port.
By the way this is something you learn to live with Samsung phones (all do it happens & on other brand's).

Zola III said:
Seams that the USB port on the phone is sustained a damage a one of the second pair of pins is either burned out or broken & first pair is not in a very good shape either. So the only real solution in your case is to get it to the repair service & get it fixed by replacing the USB port.
By the way this is something you learn to live with Samsung phones (all do it happens & on other brand's).
Click to expand...
Click to collapse
Ah okey thanks very much for you reply. Yes i go on repair service :good: