how to fix my phone XDA mini PM10A dead
First off, you're a little vague on details, don't you think?
Second of all, you're phone is not a Charmer. It's a Magician; moving to the right place.
the phone not power.
any solution to check if hardware problem or software?
Are you saying that the battery isn't charging, or the unit itself isn't turning on?
Can you get it to go into the bootloader mode?
if you see "something" on the screen such as "USB Ver.1.1" , then its no fault at all.
you can simply flash a rom.
but if it doesn't charge (you don't even see the red light)
go! get it repaired, hardware has gone bad.
mariner_heart said:
if you see "something" on the screen such as "USB Ver.1.1" , then its no fault at all.
you can simply flash a rom.
Click to expand...
Click to collapse
My Magician, will not connect in the bootloader mode (dot detected by the RUU). Whenever I use the No_ID RUU, it keeps saying that the upgrade tool, isn't for my device (although it was downloaded from the official site).
Any suggestions?
hi
hi every bady.my xda o2 its on german language.how i can fixed on english language.
mariner_heart said:
if you see "something" on the screen such as "USB Ver.1.1" , then its no fault at all.
you can simply flash a rom.QUOTE]
Hi, can any1 explain to me what it means by "flash a rom"?
I'm having the same problem, my screen shows "USB Ver 1.0"
Please help
Click to expand...
Click to collapse
Related
My friend's jamin when he tried upgrading with smart1 wm6
after the flashing process finished it gives the 3 colors of boot loader
the screen flickers continously with the 3 colors
no way to hard reset the device
and activesync doesn't feel it
I searched all the forum for a problem like this but I didn't find any
any suggestion please, or any help?
Flash NVID Rom and try Smart again. Read WM6 upgrade Manuel and readme for the ROM.
NetrunnerAT said:
Flash NVID Rom and try Smart again. Read WM6 upgrade Manuel and readme for the ROM.
Click to expand...
Click to collapse
Please how can i flash with the activesync doesn't notice my device and where's NVID Rom
Ok. I'll search for it but please help how can I flash it to the device which doesn't recognized or felt by PC
If your device is in bootloader mode, activesync cannot recognize it but this is normal. Jamin is recognize only as a usb device and you can downgrade it to NVID rom easly.
Then you could upgrade your favorite rom, I suggest PDAVIET 4.0.0.1
Bye for now
divxmaniak said:
If your device is in bootloader mode, activesync cannot recognize it but this is normal. Jamin is recognize only as a usb device and you can downgrade it to NVID rom easly.
Then you could upgrade your favorite rom, I suggest PDAVIET 4.0.0.1
Bye for now
Click to expand...
Click to collapse
I think I didn't discuss the problem well
The Problem is when I start to flashing a rom a message tells that check if the usb is connected and if the device is connected .
This is happen with the device is connected to the cable and the tricolor screen is flicking . and the device doesn't open doesn't flashing.
must use NVID rom. maybe qtek nvid one from here? http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
hasanemara said:
I think I didn't discuss the problem well
The Problem is when I start to flashing a rom a message tells that check if the usb is connected and if the device is connected .
This is happen with the device is connected to the cable and the tricolor screen is flicking . and the device doesn't open doesn't flashing.
Click to expand...
Click to collapse
If the problem still there, Try to release the battery for 1-3 hours and put it again to the device, go to the boot loader and pray. Hopefully it could work. Actually, this way worked on my Himalaya and Prophet.
Just run the "Step 1" component of the PDAViet ROM (http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip), which is just a plain AKU 2.20 NVID. This will find your device even if its in bootloader mode (it doesnt depend on activesync). Just flash it with that sucker and you should have a working phone on WM5, then you can safely upgrade it to WM6 (or leave it if you like).
ekto said:
Just run the "Step 1" component of the PDAViet ROM (http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip), which is just a plain AKU 2.20 NVID. This will find your device even if its in bootloader mode (it doesnt depend on activesync). Just flash it with that sucker and you should have a working phone on WM5, then you can safely upgrade it to WM6 (or leave it if you like).
Click to expand...
Click to collapse
I shall try and tell you the result
error 260 this is the result
i have a slight variation problem like this...
1. i was upgrading my O2 Neo to the latest WM05 & the phone went to bootloader mode & the upgrade started searching for the phone as normal..then some error & it stopped upgrading while the phone was in bootloader mode..
2. at that time,i got an urgent call & had to leave the phone in bootloader mode...
3. when i came back..the phone was dead & now it wont startup at all.. not even in the bootloader mode.
4. Maybe the batteries dead...so i charged it (Over night)..nothing happened in the morning..
5. kept the battery removed for about 5-6hours & still nothing happens..it simply does not startup.
6.I've tried holding the camera button & resetting, but it wont go into bootloader mode.
7. i;ve tried holding the connections button + camera button _ reset but it wont hard reset...
can anyone help me here...
what can i do???
hasanemara said:
error 260 this is the result
Click to expand...
Click to collapse
Error 260... If i remember correctly that's "cant find device" or something.
Few things to check:
Is the PC you are upgrading on running windows vista?
If so, use a different PC running windows XP.
Have you tried a different USB cable?
If not, do so, this tends to be the cause of problems like this.
Have you checked device manager?
Go to control panel, Administrative tools, computer management, device manager and see if you can find your device. If it has a yellow ! icon on it or is listed as "Unknown device" or anything like that then you may need to reinstall the drivers (int hsi case the easiest way to do that is to reinstall activesync). If everyhting is working properly it should show up as "HTC USB Sync", "PocketPC USB Sync" or something like that under the heading "Mobile Devices".
Have you just plain tried another computer, regardless of the OS?
I found that I could never get my phone to flash on my laptop, but it worked without a problem on my desktop. This is not to say laptop's cant do it, it simply means some computers just have problems like (in my case i believe) no USB 2.0, or too low-powered USB ports.
ekto said:
Error 260... If i remember correctly that's "cant find device" or something.
Few things to check:
Is the PC you are upgrading on running windows vista?
If so, use a different PC running windows XP.
Have you tried a different USB cable?
If not, do so, this tends to be the cause of problems like this.
Have you checked device manager?
Go to control panel, Administrative tools, computer management, device manager and see if you can find your device. If it has a yellow ! icon on it or is listed as "Unknown device" or anything like that then you may need to reinstall the drivers (int hsi case the easiest way to do that is to reinstall activesync). If everyhting is working properly it should show up as "HTC USB Sync", "PocketPC USB Sync" or something like that under the heading "Mobile Devices".
Have you just plain tried another computer, regardless of the OS?
I found that I could never get my phone to flash on my laptop, but it worked without a problem on my desktop. This is not to say laptop's cant do it, it simply means some computers just have problems like (in my case i believe) no USB 2.0, or too low-powered USB ports.
Click to expand...
Click to collapse
No I didn't change any and I can connect my o2 xda mini to the same cable
I want to ask few technical question
HOW CAN A SOFTWARE DAMAGE THE DEVICE?
CAN A SOFTWARE FOR EXAMPLE BURNS A PROCESSOR OR SOMETHING LIKE THIS?
If So there will be a big problem with those types of devices
a virus for example can destroy my device's board or processor!!
Yesterday My friend went to an I-mate customer service who tel him that
the board had been destroyed by the bad software !!!!!!!!!
Please Give me technical advice about this problem
and is there a web site for him to buy this board (i-mate jamin)?
I've tried everything... even tried it on my desktop... but my phone just wont turn on now. i've kept the battery removed for more than 8hrs now... i've even charged it for more than 8hrs non-stop..nothing happens..
maybe i should get hold of a charged battery & try it with that battery...?
Any clue how to get my phone started??
got it working !!! PHEW... i used my HP battery which was charged & put it into it..now i've got my bootloader & i'm installing the new OS as we speak... 15% done.... keeping my fingers crossed
done.. got my HP Ipaq battery , which was charged & my new started up in bootloader more.. PHEW !!!
66% done... keeping my fingers crossed
ok, installed...now, one more problem..my touch screen's not working...???
Any idea what to do?
i installed "Prophet_PDAViet_Step1"
i cant get my wizard to go to bootloader ? is there a way to force it ?
thnx
about: force bootloader.
Hello my friend, please use the search options, is easy to find answer for your questions. Here you will find the solution:
http://forum.xda-developers.com/showthread.php?t=294107
note: use the wiki
hi,
thnx for the help.. i did follow the steps mentioned.. but it styll doesnt wrk. whn i try to flash the rom.. it supposedly looses connection wid the computer .. the screen looses the light buh the wizard is on all the way.. u cant use it though.. buh the lights are still blinkin.. (the wifi and phone)
thnx
hey, my mda doesnt even turn on anymore, do u guys think its the battery but the battery was fine when i flashed it but then it doesnt boot to the window, so i took the battery out and put it back in and it doesnt turn on anymore.. i tried the camera, rest button and other stuffs. do u think my phone is bricked? or i should def. get a new battery and try it out?
I suggest you back to your Official rom first then start over again. I do this many times. Activesync always loose its connection before start flashing. It's a normal procedure. When you mention that your Wizard is still up and on the way, what you mean exatcly? Be more specific bringing point details on where you are stuck for instance. Then I'll try to help you out.
Good luck.
cellphoneman said:
hi,
thnx for the help.. i did follow the steps mentioned.. but it styll doesnt wrk. whn i try to flash the rom.. it supposedly looses connection wid the computer .. the screen looses the light buh the wizard is on all the way.. u cant use it though.. buh the lights are still blinkin.. (the wifi and phone)
thnx
Click to expand...
Click to collapse
Sounds a power problem to me. I've been into this couple of times after being in a bootloader mode for a long time. Plug the Wizard directly into the powerwall to start charging then back to your flashing process first doing with an official rom. I don't think you have bricked it.
joco2560 said:
hey, my mda doesnt even turn on anymore, do u guys think its the battery but the battery was fine when i flashed it but then it doesnt boot to the window, so i took the battery out and put it back in and it doesnt turn on anymore.. i tried the camera, rest button and other stuffs. do u think my phone is bricked? or i should def. get a new battery and try it out?
Click to expand...
Click to collapse
epimazzo said:
Sounds a power problem to me. I've been into this couple of times after being in a bootloader mode for a long time. Plug the Wizard directly into the powerwall to start charging then back to your flashing process first doing with an official rom. I don't think you have bricked it.
Click to expand...
Click to collapse
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc
Try to enter in a bootloader mode by hold on the camera button while pressing the reset button. You'll go to bootloader. If not, remove battery one more time, wait seconds and put it in back. Then, force bootloader again and try to charge through powerwall. You should get an orange light or similar during recharging. Check your model. Hope it helps you this time.
joco2560 said:
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc
Click to expand...
Click to collapse
joco2560 said:
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc
Click to expand...
Click to collapse
which version is it ,G3 or G4,and which Rom were trying to upgrade with.
Well,if its a G3 then,there's some power problem,but if it's a G4 and you tried to flash a Rom with IPL/SPL included,well its a brick.
Yeah...unfortunately zabardast_1 is right about your device. If it is a G4 and you flashed a G3 ROM, you could have bricked your techtoy! Hope you knew what you was doing at that time!
Try to always provide enought information regarding your environment and device so we can help you out better!
I'm using P4350..
After I flashed my device with a WM6.1 cooked rom, Active Sync doesn't work anymore.
When I plugged USB cable to my laptop, nothing happened. No detection of new devices,.. etc.
The screen on my device showed nothing as well. But the charging led is on as if recharging only.
When I checked Active Sync Program on my device the check box said connect via " `USB ". There's Grave accent in front of USB. I don't know if that relates or not. If so, I have no idea how to fix that....
Please advise
Volrath said:
I'm using P4350..
After I flashed my device with a WM6.1 cooked rom, Active Sync doesn't work anymore.
When I plugged USB cable to my laptop, nothing happened. No detection of new devices,.. etc.
The screen on my device showed nothing as well. But the charging led is on as if recharging only.
When I checked Active Sync Program on my device the check box said connect via " `USB ". There's Grave accent in front of USB. I don't know if that relates or not. If so, I have no idea how to fix that....
Please advise
Click to expand...
Click to collapse
What rom exactly that you flashed? need more info to help.
I'm not sure
I'm not sure what Rom am I using. The splash screen says ITsPapaBlack by Papamopps. But I'm sure this rom is not from him. This Rom is like a mod from Papamopp's rom.
I got this Rom long ago and discovered this problem just when I want to flash a new Rom.
Is there any other way to flash new Rom without using Active Sync?
I entered Bootloader mode, USB still didn't work.
P.S. I'm so impressed with immediate response and sympathy of people in this forum
Volrath said:
I'm not sure what Rom am I using. The splash screen says ITsPapaBlack by Papamopps. But I'm sure this rom is not from him. This Rom is like a mod from Papamopp's rom.
I got this Rom long ago and discovered this problem just when I want to flash a new Rom.
Is there any other way to flash new Rom without using Active Sync?
I entered Bootloader mode, USB still didn't work.
P.S. I'm so impressed with immediate response and sympathy of people in this forum
Click to expand...
Click to collapse
hmm... usually the active sync of a particular rom does not affect the bootloader. can you double check when you plugged in the USB cable at the bootloader, there is a "USB" word appears in the lower left corner of the bootloader screen. Alternatively, if your phone has hardspl, then you can flash it using a SD card.
Here is the story:
I don't know how, but i lost my radio rom... and when i wanted to install radio rom, error in windows... And my RUU has closed... Now, computer recognize my device! And i start to install rom again, and on display of my device is shown progress! All normal! But, when i hard reset it... Nothing happen... All like before updating...
Btw, before installing and after installig, on display is written SERIAL in upper part of display and v1.01 in lower part... And once i connect it on usb, SERIAL is changed to USB!
Any... One... Understand me...?!
And... Any... One... Can help me...?!
Orbiter87 said:
Here is the story:
I don't know how, but i lost my radio rom... and when i wanted to install radio rom, error in windows... And my RUU has closed... Now, computer recognize my device! And i start to install rom again, and on display of my device is shown progress! All normal! But, when i hard reset it... Nothing happen... All like before updating...
Btw, before installing and after installig, on display is written SERIAL in upper part of display and v1.01 in lower part... And once i connect it on usb, SERIAL is changed to USB!
Any... One... Understand me...?!
And... Any... One... Can help me...?!
Click to expand...
Click to collapse
Have you READ the Wiki?
I´m sure it will help you to solve your problem
Good luck,
Yup! Wiki solved prob... ^^
Problem with bootloader!
ORBY!!! 10000000000000000 KISSES FOR YOU!!!!!!!!!!!!!
Thx, man!!! You are more than best!!!
...
But now i have prob with isntalling Radio ROM... -.-
Computer starts to install it, but it stuck on 0% and displays me error 114!!!
I tried lots of stuff to install it!!! All metods i found on forum! And one more thing... I noticed that IMEI number is not displayed on Settings -> Device Information -> Identity ...
Any idea where is problem...? Btw, if you tell me that prob is dead main board... Don't tell me that, please!!!
Yes the MB is problem, 114 error. You can see on booting "No GSM" there is no way to fix this at the moment.
are you sure? same problem here
i got the "no gsm" message on my uni, no more imei and error 114 on radio upgrade...
all the functions work, except the phone/sms/mms
the problem comes on a phone call that i cant stop : touch screen, red button, the call is always in progress (more than 1 hour, but the communication is shut down). The only way to stop the call is soft reset the uni... and then no more gsm!
please if someone have an idea...
sorry for my poor english
Plz help .... installed a wrong ROM for HTC HD2 on my T-Mobile HD2, now it stopped responding totally, no power, boatloader not showing, the orange led not working when connecting the charger.
Is there anyway i can fix that?
Thanks
Can you provide a link to the Rom?
Sent from my HTC Desire using XDA App
When you plug in the USB connector to the phone and computer and turn the phone on, does it power on?
If it does, then get into boot loader then flash an official tmo rom.
Madii said:
installed a wrong ROM.......................now it stopped responding totally, no power, boatloader not showing, the orange led not working when connecting the charger.
Click to expand...
Click to collapse
all signs that you flashed a rom containing a ..51.. radio.
options
1 - JTAG it. (expensive, tricky)
2 - warranty repair (dont mention flashing)
3 - paid repair (around $140 i believe)
Thank you for replying, but no it does not operate
Madii said:
Thank you for replying, but no it does not operate
Click to expand...
Click to collapse
Ok well it seems like a radio brick then, and since you don't feel like providing more info you should just stick with samual's 3 options. Good luck.
hd2 died
i also did the same thing to my phone i tryed to load a stock rom russia version and now my phone has no led when plugged in, wont turn on dont do anything. is there a fix for this????
raskalaaron said:
i also did the same thing to my phone i tryed to load a stock rom russia version and now my phone has no led when plugged in, wont turn on dont do anything. is there a fix for this????
Click to expand...
Click to collapse
Your options are in post 4. But like I previously stated, explaining your device version, ROM, SPL and flash method helps a little more to understand what type of brick it is.
hey man i did the same i instaled 1.66 rom in my t-mobile very dumb !!! but in the end after 2 weeks of searching i found service for it , if you still have the phone contact me
Madii said:
Plz help .... installed a wrong ROM for HTC HD2 on my T-Mobile HD2, now it stopped responding totally, no power, boatloader not showing, the orange led not working when connecting the charger.
Is there anyway i can fix that?
Thanks
Click to expand...
Click to collapse
where you are come form ?