Related
My friend's jamin when he tried upgrading with smart1 wm6
after the flashing process finished it gives the 3 colors of boot loader
the screen flickers continously with the 3 colors
no way to hard reset the device
and activesync doesn't feel it
I searched all the forum for a problem like this but I didn't find any
any suggestion please, or any help?
Flash NVID Rom and try Smart again. Read WM6 upgrade Manuel and readme for the ROM.
NetrunnerAT said:
Flash NVID Rom and try Smart again. Read WM6 upgrade Manuel and readme for the ROM.
Click to expand...
Click to collapse
Please how can i flash with the activesync doesn't notice my device and where's NVID Rom
Ok. I'll search for it but please help how can I flash it to the device which doesn't recognized or felt by PC
If your device is in bootloader mode, activesync cannot recognize it but this is normal. Jamin is recognize only as a usb device and you can downgrade it to NVID rom easly.
Then you could upgrade your favorite rom, I suggest PDAVIET 4.0.0.1
Bye for now
divxmaniak said:
If your device is in bootloader mode, activesync cannot recognize it but this is normal. Jamin is recognize only as a usb device and you can downgrade it to NVID rom easly.
Then you could upgrade your favorite rom, I suggest PDAVIET 4.0.0.1
Bye for now
Click to expand...
Click to collapse
I think I didn't discuss the problem well
The Problem is when I start to flashing a rom a message tells that check if the usb is connected and if the device is connected .
This is happen with the device is connected to the cable and the tricolor screen is flicking . and the device doesn't open doesn't flashing.
must use NVID rom. maybe qtek nvid one from here? http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
hasanemara said:
I think I didn't discuss the problem well
The Problem is when I start to flashing a rom a message tells that check if the usb is connected and if the device is connected .
This is happen with the device is connected to the cable and the tricolor screen is flicking . and the device doesn't open doesn't flashing.
Click to expand...
Click to collapse
If the problem still there, Try to release the battery for 1-3 hours and put it again to the device, go to the boot loader and pray. Hopefully it could work. Actually, this way worked on my Himalaya and Prophet.
Just run the "Step 1" component of the PDAViet ROM (http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip), which is just a plain AKU 2.20 NVID. This will find your device even if its in bootloader mode (it doesnt depend on activesync). Just flash it with that sucker and you should have a working phone on WM5, then you can safely upgrade it to WM6 (or leave it if you like).
ekto said:
Just run the "Step 1" component of the PDAViet ROM (http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip), which is just a plain AKU 2.20 NVID. This will find your device even if its in bootloader mode (it doesnt depend on activesync). Just flash it with that sucker and you should have a working phone on WM5, then you can safely upgrade it to WM6 (or leave it if you like).
Click to expand...
Click to collapse
I shall try and tell you the result
error 260 this is the result
i have a slight variation problem like this...
1. i was upgrading my O2 Neo to the latest WM05 & the phone went to bootloader mode & the upgrade started searching for the phone as normal..then some error & it stopped upgrading while the phone was in bootloader mode..
2. at that time,i got an urgent call & had to leave the phone in bootloader mode...
3. when i came back..the phone was dead & now it wont startup at all.. not even in the bootloader mode.
4. Maybe the batteries dead...so i charged it (Over night)..nothing happened in the morning..
5. kept the battery removed for about 5-6hours & still nothing happens..it simply does not startup.
6.I've tried holding the camera button & resetting, but it wont go into bootloader mode.
7. i;ve tried holding the connections button + camera button _ reset but it wont hard reset...
can anyone help me here...
what can i do???
hasanemara said:
error 260 this is the result
Click to expand...
Click to collapse
Error 260... If i remember correctly that's "cant find device" or something.
Few things to check:
Is the PC you are upgrading on running windows vista?
If so, use a different PC running windows XP.
Have you tried a different USB cable?
If not, do so, this tends to be the cause of problems like this.
Have you checked device manager?
Go to control panel, Administrative tools, computer management, device manager and see if you can find your device. If it has a yellow ! icon on it or is listed as "Unknown device" or anything like that then you may need to reinstall the drivers (int hsi case the easiest way to do that is to reinstall activesync). If everyhting is working properly it should show up as "HTC USB Sync", "PocketPC USB Sync" or something like that under the heading "Mobile Devices".
Have you just plain tried another computer, regardless of the OS?
I found that I could never get my phone to flash on my laptop, but it worked without a problem on my desktop. This is not to say laptop's cant do it, it simply means some computers just have problems like (in my case i believe) no USB 2.0, or too low-powered USB ports.
ekto said:
Error 260... If i remember correctly that's "cant find device" or something.
Few things to check:
Is the PC you are upgrading on running windows vista?
If so, use a different PC running windows XP.
Have you tried a different USB cable?
If not, do so, this tends to be the cause of problems like this.
Have you checked device manager?
Go to control panel, Administrative tools, computer management, device manager and see if you can find your device. If it has a yellow ! icon on it or is listed as "Unknown device" or anything like that then you may need to reinstall the drivers (int hsi case the easiest way to do that is to reinstall activesync). If everyhting is working properly it should show up as "HTC USB Sync", "PocketPC USB Sync" or something like that under the heading "Mobile Devices".
Have you just plain tried another computer, regardless of the OS?
I found that I could never get my phone to flash on my laptop, but it worked without a problem on my desktop. This is not to say laptop's cant do it, it simply means some computers just have problems like (in my case i believe) no USB 2.0, or too low-powered USB ports.
Click to expand...
Click to collapse
No I didn't change any and I can connect my o2 xda mini to the same cable
I want to ask few technical question
HOW CAN A SOFTWARE DAMAGE THE DEVICE?
CAN A SOFTWARE FOR EXAMPLE BURNS A PROCESSOR OR SOMETHING LIKE THIS?
If So there will be a big problem with those types of devices
a virus for example can destroy my device's board or processor!!
Yesterday My friend went to an I-mate customer service who tel him that
the board had been destroyed by the bad software !!!!!!!!!
Please Give me technical advice about this problem
and is there a web site for him to buy this board (i-mate jamin)?
I've tried everything... even tried it on my desktop... but my phone just wont turn on now. i've kept the battery removed for more than 8hrs now... i've even charged it for more than 8hrs non-stop..nothing happens..
maybe i should get hold of a charged battery & try it with that battery...?
Any clue how to get my phone started??
got it working !!! PHEW... i used my HP battery which was charged & put it into it..now i've got my bootloader & i'm installing the new OS as we speak... 15% done.... keeping my fingers crossed
done.. got my HP Ipaq battery , which was charged & my new started up in bootloader more.. PHEW !!!
66% done... keeping my fingers crossed
ok, installed...now, one more problem..my touch screen's not working...???
Any idea what to do?
i installed "Prophet_PDAViet_Step1"
Long story short my phone worked fine for months. Went to a 1.56 Rom active sync stopped working. I have already tried everything associated with AS problem, everything. Went to get it repaired at HTC America in Houston, TX there gay and dont support T8285. I have tried flashing via memory card but I seem to be retarded doing it that way. Engineer said mini usb slot works fine, cooked rom may have corrupted AS. Customer service would not let him fix my phone because it was an "aussie version". I just want the phone to sync is that too much to ask? Anyway $100 bucks to anyone that can make it work paid via paypal immediately.
moved out of development
Personally I think your mad offering $100. I'm sure most people would have hepled you for free, including myself. I'm not after your money but offer my assistance.
Have you tried doing a hard reset? uninstalling activesync & reinstalling it?
Flashing different rom. If you can't flash through SD Card, have you tried flashing again via usb. You don't need phone sync'd
Put your phone into bootloader and then connect to pc via usb. At bottom of screen the text should change from 'serial' to 'usb'. Now flash phone by running rom (cooked or stock etc) you downloaded. Put .nbh and ruu file into same folder and then open ruu file and follow instructions.
I severely doubt cooked rom affected activesync.
EDIT
As bonesy said below, you'll need either USPL or HSPL to flash 1.56+ based rom.
Full tutorial or dummies guide to flashing 1.56+ based roms can be found in cRaCKwHoRe's guide. See my signature
Turn off your phone, Take out your memory card, Plug the miniUSB in then power on (Hold volume down press power holding volume down still) This will bring up a coloured screen. Run the ROM Wrapper package exe (BlackstoneRUUWrapper) This SHOULD now install the right ROM.
Please make sure you are using a 1.56 rom with the HSPL or i think it has problems with GFX.
When windows loads go to start>settings>connections>USBtoPC
this is on 6.5 rom not sure about 6.1 :/
Untick Enable faster data synchronizaion, I had to do all this on works computer to update a ROM god knows why but this was my fix.
ROM Should load as should activesync now.
Please let me know if this helps
Tried to post in ure original threads but mods were moving to trash each time BAH!
Thanks to both of you guys for your suggestions. I thought I was not a noob when it came to flashing roms but once I could not do it via usb I was a whole different story. Yeah I am offering the $100 just to get people to help. I know you get slammed if you ask a question so I figured I would make it worth someone's time. I am going right now to pick it up from the repair center so I will try during my lunch in about an hour.
Fallen Spartan said:
Personally I think your mad offering $100. I'm sure most people would have hepled you for free, including myself. I'm not after your money but offer my assistance.
Have you tried doing a hard reset? uninstalling activesync & reinstalling it?
Flashing different rom. If you can't flash through SD Card, have you tried flashing again via usb. You don't need phone sync'd
Put your phone into bootloader and then connect to pc via usb. At bottom of screen the text should change from 'serial' to 'usb'. Now flash phone by running rom (cooked or stock etc) you downloaded. Put .nbh and ruu file into same folder and then open ruu file and follow instructions.
I severely doubt cooked rom affected activesync.
Click to expand...
Click to collapse
I tried uninstalling and reinstalling active sync. Different cables, different computers, xp and vista, everything, checked usb enhanced, etc ,etc.
bonesy said:
Turn off your phone, Take out your memory card, Plug the miniUSB in then power on (Hold volume down press power holding volume down still) This will bring up a coloured screen. Run the ROM Wrapper package exe (BlackstoneRUUWrapper) This SHOULD now install the right ROM.
Please make sure you are using a 1.56 rom with the HSPL or i think it has problems with GFX.
When windows loads go to start>settings>connections>USBtoPC
this is on 6.5 rom not sure about 6.1 :/
Untick Enable faster data synchronizaion, I had to do all this on works computer to update a ROM god knows why but this was my fix.
ROM Should load as should activesync now.
Please let me know if this helps
Tried to post in ure original threads but mods were moving to trash each time BAH!
Click to expand...
Click to collapse
Thanks for breaking it down barney style for me. I will try this very soon. If it works my friend you got $100 smackers.
no worries, Glad to help (if it does lol)
bonesy said:
Turn off your phone, Take out your memory card, Plug the miniUSB in then power on (Hold volume down press power holding volume down still) This will bring up a coloured screen. Run the ROM Wrapper package exe (BlackstoneRUUWrapper) This SHOULD now install the right ROM.
Please make sure you are using a 1.56 rom with the HSPL or i think it has problems with GFX.
When windows loads go to start>settings>connections>USBtoPC
this is on 6.5 rom not sure about 6.1 :/
Untick Enable faster data synchronizaion, I had to do all this on works computer to update a ROM god knows why but this was my fix.
ROM Should load as should activesync now.
Please let me know if this helps
Tried to post in ure original threads but mods were moving to trash each time BAH!
Click to expand...
Click to collapse
So I got my phone and this is what it says.
BLAC120 32M
SPL-1.56.01Olinex
MicroP-Blackstone (LED) v6
and it's just red green blue and white no word on the bottom. Ran BlackstoneRUUWrapper with the nbh file that I wanted and it gave me a connection error. Now it says Seiral in the white.
Fallen Spartan said:
Personally I think your mad offering $100. I'm sure most people would have hepled you for free, including myself. I'm not after your money but offer my assistance.
Have you tried doing a hard reset? uninstalling activesync & reinstalling it?
Flashing different rom. If you can't flash through SD Card, have you tried flashing again via usb. You don't need phone sync'd
Put your phone into bootloader and then connect to pc via usb. At bottom of screen the text should change from 'serial' to 'usb'. Now flash phone by running rom (cooked or stock etc) you downloaded. Put .nbh and ruu file into same folder and then open ruu file and follow instructions.
I severely doubt cooked rom affected activesync.
EDIT
As bonesy said below, you'll need either USPL or HSPL to flash 1.56+ based rom.
Full tutorial or dummies guide to flashing 1.56+ based roms can be found in cRaCKwHoRe's guide. See my signature
Click to expand...
Click to collapse
Well I get it into bootloader no problem but then plug in the usb cable and nada, it says serial. So then I tried starting bootloader mode with the cabe and still nada, it does not even say serial. If I unplug it then it says serial. I have tried both ways to run the RUU Wrapper and I keep getting the usb conncetion error
serial?
Hi, please can you post a screen shot of where it says serial at boot screen?
stoolzo said:
Hi, please can you post a screen shot of where it says serial at boot screen?
Click to expand...
Click to collapse
I cant because I cant use my software that would do that since it wont sync to my computer.
snap shot
just take a snap shot with a webcam or digital camera if you have one.
stoolzo said:
just take a snap shot with a webcam or digital camera if you have one.
Click to expand...
Click to collapse
let me see if this comes thru ok.
turcomora said:
let me see if this comes thru ok.
Click to expand...
Click to collapse
Here yo go. This picture is with me having the device plugged in it charging fine. Then entering bootloader mode. If I unplug then it will say serial. If I dont plug in before then enter bootloader it will say serial still.
thanks
ok, that looks pretty normal,so to recap you fully powerdown the phone by taking the battery out, put the cable into both the phone and pc and the turn on holding volume down and it just sits there?, what happens when you press volume up at this point?
stoolzo said:
ok, that looks pretty normal,so to recap you fully powerdown the phone by taking the battery out, put the cable into both the phone and pc and the turn on holding volume down and it just sits there?, what happens when you press volume up at this point?
Click to expand...
Click to collapse
Only thing I was not doing was taking out the battery. Just tried that and still same screen. Nothing happens when I press the volume up button just stays there.
pc
do you have another pc to try this on to rule out an actual active sync problem?
stoolzo said:
do you have another pc to try this on to rule out an actual active sync problem?
Click to expand...
Click to collapse
Yeah I have been trying on my latop, home pc, and work pc and nothing same result. I have tried different usb cables, os, reinstalling, everything. Only thing I have not tried is flashing via sd card yet.
brick
its sounds like you have a corrupt spl, it is definately worth trying the sd card as it may allow you to activesync but it may then fallover when it reboots and goes into boot mode. This i where user viperbjk (see android dev thread) may be able to help as he has successfully managed to unbrick a phone.
I had this same problem but powering down and simply triggering the and spl reflash resolved it. your problem sounds different though.
Hi,
if i connect my HTC Touch HD with my computer, it's just charging, nothing more. If i go to Bootloader, there is just written Serial even if its connected.
I am using Dutty ROM since some weeks and didn't had any problems till a few days ago, the strange thing is, that i didn't change anything.
I tried it on my laptop and on my computer the one with windows vista the other one with win xp, it worked on both, but not anymoe.
i also have a problem with the camera, if i press it nothing happens it just stays in the menu. Some days ago i got a error failed to initialize camera, but no more error anymore.
In my opinion my hardware is broken somehow, i hope someone in here can tell me sth different and a solution.
And if my hardware is broken, how can flash my original rom back without an usb connection, because the warenty will be gone with a custom rom i think.
I hope someone can help me.
Kryston said:
Hi,
if i connect my HTC Touch HD with my computer, it's just charging, nothing more. If i go to Bootloader, there is just written Serial even if its connected.
I am using Dutty ROM since some weeks and didn't had any problems till a few days ago, the strange thing is, that i didn't change anything.
I tried it on my laptop and on my computer the one with windows vista the other one with win xp, it worked on both, but not anymoe.
i also have a problem with the camera, if i press it nothing happens it just stays in the menu. Some days ago i got a error failed to initialize camera, but no more error anymore.
In my opinion my hardware is broken somehow, i hope someone in here can tell me sth different and a solution.
And if my hardware is broken, how can flash my original rom back without an usb connection, because the warenty will be gone with a custom rom i think.
I hope someone can help me.
Click to expand...
Click to collapse
A hard reset will quickly tell you if it's hardware or software and you don't need usb for that. There is also an option which dictates what the phone does when connected via usb, so you might want to check that option first.
need to read & search a little more
last paragraph of this post outlines how to return to stock rom
http://forum.xda-developers.com/showpost.php?p=2710548&postcount=1
i did hardreset, but still same problem
what i also noticed, is that sometimes my display don't work, i have sound and vibrate feedback, but i see just a black display, softreset etc doesen't work somehow i have to take of the battery.
i noticed also that the usb cable is a bit broken, but it still charges the phone.
but i already saw that normal usb cable should work too, so i tried it but no change.
i guess i will try to get the stock rom again now and see what happens
well like i thought, i can't get the stock rom, because i dont have a usb connection
any more suggestions?
Kryston said:
well like i thought, i can't get the stock rom, because i dont have a usb connection
any more suggestions?
Click to expand...
Click to collapse
There is 2 methods to flashing roms. Have you tried SD card method?
1. Download ROM image you would like to use, normally named RUU_Signed.nbh, and rename it to "BLACIMG.nbh"
2. Copy BLACIMG.NBH into the root dir of your Storage Card.
3. Be sure to have at least 30% of charge.
4. Turn off your device by using the Power Button
5. Go to bootloader mode. Push and hold Vol Down + press Power button.
6. As soon as presented the message, push Power button to start flashing or Volume Down button to cancel.
7. The whole procedure will take about 3 minutes. After you finish and see the relative message, soft reset your device, you are ready.
thanks god i didn't bring the phone to shop yet xD
thank u, i will check this method i will post here if it works later
well now i have another problem
there is written upgrade rom code error please try again on bootloader, i cant turn it on anymore it gets stuck on the loading screen of the flashing progress
Kryston said:
well now i have another problem
there is written upgrade rom code error please try again on bootloader, i cant turn it on anymore it gets stuck on the loading screen of the flashing progress
Click to expand...
Click to collapse
I had this exact same problem a while back after a bad flash. What you need to do is flash carriers orginal stock rom onto device. This will be the only rom which will work. Go to wiki section on stock roms here and download your original rom and flash it. Don't worry if bottom of bootloader is blank or doesn't say 'usb', original rom will flash anyhow.
More info read this thread
i am downloading right now, hopefully it will work, i will write more infos later
thank u for your help, without you, i would be lost...
i am stuck, i get error 206 connection
i downloaded stock rom to my pc
and i'm a bit confused, my pc noticed that i pluged in the phone, my device manager showed my phone, this worked only one time, now nothing...
EDIT: in bootloader mode, serial staus doesnt switch to usb or blank, updateing usb driver doesn't work without usb connection to device, at least i didnt found sth here
i will try it on my other computer now, but i doubt it will work
EDIT2: got usb connection for some seconds, problem is my hardware of device its broken somehow, if i press on th eback of the device i am able to get usb connection, now it failed, i will give it some more tries, there was sth 294 ID error
EDIT3: seems like its the wrong rom, how can i find out which rom will work?
EDIT4: semms like i got a working rom its at 10%
EDIT5: Device working again, usb working perfectly again, dunno why, but camera still doesnt work, there happens nothing if i press on it and display turns black sometimes as before.
i flashed an O2 Rom now, from my provider.
My last question now is, what about warranty, how can i know that uspl/hsapl is fully removed from device and how to find out if device is now a case of warrnty, where can i check it? because i want a working camera again, so i think i need the warranty
Some infos:
O2 Provider ROM flashed
On Bootloader i see:
BLAC100 32M
SPL-1.54.0000
MicroP-Blackstone (LED) v6
In my opinion its fine for warranty, but i want someone to confirm this.
And thank you alot for ur help and work in this forum =)
If you have an official HTC upgrade rom on your device you are fine for warranty. As your SPL says 1.54.0000 this means you haven't got USPL or HSPL on your device, so you're fine.
thank you very much
Hi all.
I just a got a HD2 today. And the first thing that came in my mind was "Let's go to xdaDev to get a nice custom rom". I downloaded one.
After that I put the usb and try to make it syncronize. And the problem is here : ActiveSync dont reconize the phone. I spent the last 4 hours to google why it shall not work. I tried to unstick option at "Start=>Settings=> Usb to PC" but it dont work. Nothing more after perfoming a hard reset and reinstall ActivSync.
But something is strange : When I go in the bootloader, there is the 3 color screen and the phone Display "Serial" at the bottom of the screen ; and when I start it again with USB plugged, it doesnt display "USB" instead of "Serial" it's just void and if I remove the USB "Serial" is displayed.
Plz help me to make the phone syncronize .
I use Windows XP (no firewall, no antivirus) and an official Orange Rom. My SPL is 1.42.0000. I just hope there is no hardware problem ...
Some news ...
The HD2 isnt detected on 2 other PC (Both Win XP). I managed to syncronize my old Diamond too, and it worked well. Same with a HTC Touch and a Touch Cruise, the 3 ones works.
I also tried to use Bluetooth to get an Activesync connection and this time, it noticed the HD2 but no way to get a synchronization.
Any ideas ?
Try this: goto Settings, Other (Miscellaneous settings), USB to PC, Enable faster data data synchronization. Try to tick and untick the last setting.
It doesnt work . I'm trying to follow a "GoldCard" tutorial to flash to an official HTC rom. Maybe it's Orange operator rom ... But if you have any other suggestion, let me know
I can't believe that it's such a s*** to just connect the last HTC phone to a computer. The tutorial need ActiveSync to get the SD card ID so I will not succes in this way.
Is there another software that can be used instead of ActiveSync ?
Did you flash any rom at all or are you still stock?
If you have flashed already, Have you tried to go back to the default shipped rom using sd card (not goldcard)?
Find the rom that shipped with your device, extract the RUU_Signed.nbh file from it, copy it to your fat32 formatted sd card, rename leoimg.nbh, put card in phone, boot phone with down volume held, hopefully you get the message on the three colour screen saying something like 'press volume up to start' or somesuch.
THis should not only flash the rom, but also fix spl if it has become corruptted(which appart from hardware errors is the only reason i can see that it wouldn't recognise a USB connection)
Make sure it is the correct rom for your phone, though, correct vendor and region id.
I must say if you havent flashed yet it sounds like a hardware fault with teh usb cable/connector
I'm currently running a stock Rom from a french operator nammed "Orange". I haven't flashed anything since ActiveSync just dont want to know anything about my HD2.
Maybe I shall send it back to the seller. That's so frustating ...
If i dont find a way to solve this problem until the end of the day, I will return the phone.
Anyway thx for trying to help me
To me either the cable or the phone is faulty. Try another cable if you have one, if not just have the phone exchanged.
Phoque_You said:
I'm currently running a stock Rom from a french operator nammed "Orange". I haven't flashed anything since ActiveSync just dont want to know anything about my HD2.
Maybe I shall send it back to the seller. That's so frustating ...
If i dont find a way to solve this problem until the end of the day, I will return the phone.
Anyway thx for trying to help me
Click to expand...
Click to collapse
Ah in that case then i'd seriously consider taking it back /sending it back. Especially if you have tried more than one computer, sounds to me like faulty cable or USB socket.
kilrah said:
To me either the cable or the phone is faulty. Try another cable if you have one, if not just have the phone exchanged.
Click to expand...
Click to collapse
You must be right. I tried everything and I never had so much pain with my others HTC to get syncronization
I had the same problem not beeing able to connect to the internet via computer. After playing with the activesync settings on the Computer -> conection settings-> ticking on and off some of the boxes->ok, it worked again.
I have connected to three of these phones ( 2 french 1 english) and no problem whatsoever, everything happens without needing to touch any of the settings...is your pc even recognising that something is being plugged in on the USB?
Have you installed the latest version of activesync?
If you have done all the obvious things and it still does not work, the phone or the cable is defective...It should connect straight out of the box with a standard, un changed version of activesync.
Send it back!
Gone through the various help threads on rebooting, resetting etc.. Battery is charged, m/card and sim have been removed..
Phone is at the boot loader stage - reads Upgrade ROM code error - have the USB plugged in and can see the USB writing on the white part of the red,green,blue,white screen but pc refuses to make a connection.. keeps saying activsync not connected or busy..
Have tried rebooting the phone and also the pc, changed cables, changed USB port.. no joy..
Any suggestions appreciated..
not sure what you want...but you have certainly described the situation really well.
i understand that your device is in the bootloader (thats the multi-color screen). i understand that "USB" is written at the bottom of the bootloader screen. i understand that you have removed all the cards.
what i don't understand is what you want help with? why are you trying to establish an activesync connection? activesync will obviously NOT connect if you are in the bootloader because the bootloader isn't the same as windows. windows mobile must be running if you want a full activesync connection.
so what exactly are you looking for? do you want to flash a ROM or radio ROM or some such? are you simply trying to "hard reset" your device? details please!
yea, dont be confused by posts that say 'when connected to active sync, blahblahblah', they dont really mean activesync the program, they simply mean a usb connection. The fact that it says USB on the white part means you can now run your rom flash,.
ok.. what I am trying to do is re-flash the ROM.. I had a flashed ROM on there and I was just going to upgrade it to the latest one (Laurentius26 GoldEdition V3.4 Stock/Spike™ WWE 23568) and about 20% of the way through it froze and then I get a recovery screen come up.. followed the instructions and started to flash again and the same thing happened.
In both cases it seems as if the USB connection was dropped even though there was nothing else happing on the pc at the time.. now when I try to re-flash, no US connection is being established.
Well I left everything disconnected last night and tried again this morning. We have got a connection now but the re-flash has failed again so I shall just go back to the old ROM.. thanks for you all's input.
probably a bad ROM download. I would try to download again and if that doesn't fix it, let the ROM cooker know that he probably has a bad upload of the ROM.