Hi can anybody tell me how can I Install a new rom and SO on my wallaby, cause i was trying to update the rom and after an error everything is gone, now I just have the Bootloader.
Use xda tools to write the nb1 (i think) file to sd, insert into device, and hard reset. aftwerwords it should automaticly ask if what you want to do. ie sd->device, device->sd, etc..... choose sd->device. Do a search on "rom bootloader method" (find all words). YOu should do some more reading on this forum first.
I´ll Try this...Thank you
I've read tons of posts on here about flashing the Wing and I've still be unable to flash it correctly, during the flash it will get some type of ITWRITE error then my phone will have a box on the screen that says error unknown status, I let it sit then my pdocwrite pops up that error and then it will lose the USB connection to the computer and be locked up then I have to RUU it to make it work again, SPL is 4.28.0001, I'm just trying to put some new firmware on it to make it run better than the stock t-mobile firmware, all these posts are here are confusing me on what to do because some are outdated or I'll read one thing then something else I'll read contradicts itself, can someone point me in the right direction, I know that you have guides and things but half of them are outdated and I'm not even sure what the latest firmware is for things like OpenTouch and what not, I wish someone would clean up all the old posts so we don't have quite as much to dig through. Any help would be appreciative.
you're trying to flash using aserg's method, which is painfully outdated and you've got an SPL of more than 4, so you should just go ahead and HardSPL.
in the windows mobile world, NEVER read the outdated stuff, especially on xda-devs. somebody always asks some question that requires one of us to go back into the deep recesses of our memory, and that kind of question usually happens pretty often. Most answers are either really specialized or there is already thread on the topic on the first or second page of the forum.
now to answer your question. Do not touch the cable while flashing. When it says to unplug it, do so and then hard reset. Make sure you install the cabs before you start pdocwrite.
welcome to xda-devs. feel free to pm me any questions.
If I've already done the hardspl using Aserg-Hard-Spl.4.70.yan, and I'm trying to put Open Touch v6.1 Lite on my Wing, do I use the Herald-USPL-Beta3 method, I've got Open Touch v3.0 on my phone now but want to see if I like Open Touch v6.1 any better..
Nevermind I figured it out, followed the updated flashing guide.
hi all im pretty sure ive bricked my hd2 but im not positive i can get into the boot loader and i have tried to flash via the sd card and that even fails right now when i turn it on i get the black screen with the white triangle with the exclamation and it says software update failed now i followed this guide http://forum.xda-developers.com/showthread.php?t=681317 and used that stock rom but that fails im putting this up in hopes that i can get help with this now what happened is a bit odd i was running android on the sd card and it would reboot at random whenever i tried too do something then all of a sudden it started too flash my winmo rom so i didn't interrupt it then everything worked ok i put a different version of android on the card i was even able too try and flash the rom via usb somehow it went threw but that failed too i was at the 2.12 radio first things first does anyone know how too change the radio via sd card and does anyone have any suggestions and remember i can get into the bootloader thanks in advance everyone for any help you can give on this
Please read this whole post before clicking on links.
Yes, and apparently you never read mskips thread which was posted in the guide you used. Check this link out to flash a radio via sdcard
http://forum.xda-developers.com/showthread.php?t=653614
If you can get into boot loader mode you might have a chance to save the phone. Have you tired Task 29? It'll erase everything on your phone (besides the radio)?
Also please provide me with the link to the thread where you got the radio from.
If you need some help hit me up on gtalk using your google account. ldgarcia4283, i'm gonig to walmart but i can chat on gtalk.
Hi, firstly I used unrEVOked to root the phone and thought I had backed up the original rom with clockwork recovery. I then installed Cyanogenmod, but due to various issues I want to revert back to the original ROM.I have tried clockwork recovery but it just keeps booting back to Cyanogenmod.
Next I searched for the original rom downloaded it to the phones sd card but if I try to install it it does not show in Clockwor recovery, but when I plug the phone into the pc and open the phones sd card it shows the rom on there.This is what I downloaded....1501_signed.exe(cannot post link in 1st thread)
So what am I doing wrong or what have I done wrong?I had several issues with things not working using Cyanogenmod. Apps were not downloading the clock did not show properly only half of it was visible,amongst other things.And to cap it all I cannot revert back to the original rom.I have obviously made some mistake along the way and I have searched the forums but cant find clear instructions of how to switch back.I am acomplete noob and have tried to run before I could walk!
Any help will be greatly appreciated
Thanks
If you have downloaded a RUU (.EXE), connect your phone to the PC, and run the EXE on your PC. It will proceed from there.
But remember, if you flash a FroYo RUU (Original ROM), you will lose your ability to root the phone. If you want to retain that, download a "Safe" version of the RUU (Untouched, only HBOOT Removed) from here:
http://forum.xda-developers.com/showthread.php?t=877243
(Download WildPuzzle v0.0. Its the original ROM with just HBOOT Removed as stated above)
Hi thanks for the reply, I tried to load that but it eventually came up with :-
Error 131 please get the correct update for your phone,or words similar to that.So how do I know what rom is the correct one for my phone?If I download it to my desktop do I then need to move the zip to the phones sd card then start it with power+ volume down pressed and select the zip from the sdcard?
Thanks
check this out---->http://forum.xda-developers.com/showthread.php?t=807983
or maybe this will help
http://forum.xda-developers.com/showthread.php?t=877091
Hello to all of you guys, i have searched the forum but have not found a similar problem that I currently have in hands, so let me start to explain.
I have an HTC T-Mobile HD2
Model No: PB81120
SPL: 2.10.0000 8G XE
Stock Rom: Never tried to install anything or upgrade
The phone worked fine until some days ago it stopped working and hangs on boot, screen all white with the logo all messed up and stretched.
I did a softreset, an hardreset, i can boot it on Bootloader (the tri-color screen) and it detects usb.
So thinking this behavior was caused by its software I tried to reset it (soft and hard) but with no luck, if i try to install via USB the phone dont pass the 0% (and it shows no logo above the bar, only a white rectangle with some black lines), then I tried boot from the SD (8gb class 4) but it hangs on Loading... screen (searching the other threads i found that maybe I need a higher class card and if possible with only 4 or 2gb).
Running Task29 from toolkit or trying to install something from the USB does the same thing as trying to install the Stock ROM (freezes at 0%).
So my question is, am I doing somthing wrong, or do you guys have a solution for my problem? And sorry for my english.
P.S: If needed i will buy another microSD card.
P.S2: If you have any questions, I will try to answer them the best as I can.
Album
imgur.com/a/kzRMo#0
I continue with the same problem, as I am unable to post direct links in this forum, I put at the end of previous post a link to one album with pictures and screenshots I took from my phone while attempting a recovery, I hope its enough for you guys to understand whats going on.
Primordium said:
I continue with the same problem, as I am unable to post direct links in this forum, I put at the end of previous post a link to one album with pictures and screenshots I took from my phone while attempting a recovery, I hope its enough for you guys to understand whats going on.
Click to expand...
Click to collapse
Based on the second image, it looks like you're trying to re-flash WM6.5 on it, correct? FYI, v3.14.405.2 is not the latest version. I think that v3.14.531.0 is (and the filename is RUU_Leo_1_5_TMOUS_3.14.531.0_Radio_15.42.50.09U_2.14.50.04_LEO_1.5_Ship.exe). I suggest looking for that (it's likely in a stickied thread in the WM6.5 sub-forum) and trying it. If that doesn't work, you might try downloading the latest radio and installing that first.
Another idea: could your USB cable be flakey, perhaps? If you have another that you can grab, try that.
If you can't manage to re-install WM6.5, try installing Android or Windows Phone 7 (see the respective sub-forums), instead. This guide can help you do it for Android, if you're interested.
Osprey00 said:
Based on the second screenshot, it looks like you're trying to re-flash WM6.5 on it, correct? FYI, v3.14.405.2 is not the latest version. I think that v3.14.531.0 is (and the filename is RUU_Leo_1_5_TMOUS_3.14.531.0_Radio_15.42.50.09U_2.14.50.04_LEO_1.5_Ship.exe). I suggesting looking for that (it's likely in a stickied thread in the WM6.5 sub-forum) and trying it. If that doesn't work, you might try downloading the latest radio and installing that first.
Another idea: could your USB cable be flakey, perhaps? If you have another that you can grab, try that.
If you can't manage to re-install WM6.5, try installing Android or Windows Phone 7 (see the respective sub-forums), instead. This guide can help you do it for Android, if you're interested.
Click to expand...
Click to collapse
Ty for the fast answer, I'm donwloading the ROM right now and later i will update with the results. I cannot install Radio only version because I do not have HSPL installed, and about the USB cable, I'm using it with other devices and it's working fine. (I will try to find another USB meanwhile cable just to be sure).
Update, after downloading the ROM I tried to install it via USB but the strange behavior continues, it does not pass the 0% and after some minutes the setup fails as shown in the album I posted in the first post
I'm not sure what more you can try if you want to keep WM6.5. I suppose that you could try to install HSPL, a new radio and even MagLdr, then try to install the WM6.5 ROM again. If it fails, then just install Android or WP7, I guess. I would just do that, anyways, since WM is dead. I would go with the Android 4.3 (latest version from Google) ROM that's in my signature, but it's up to you.
Osprey00 said:
I'm not sure what more you can try if you want to keep WM6.5. I suppose that you could try to install HSPL, a new radio and even MagLdr, then try to install the WM6.5 ROM again. If it fails, then just install Android or WP7, I guess. I would just do that, anyways, since WM is dead. I would go with the Android 4.3 (latest version from Google) ROM that's in my signature, but it's up to you.
Click to expand...
Click to collapse
The problem is install anything, i cannot install HSPL or anything else by USB (phone freezes at 0%), trying to install from the microSD the behavior is hanging at Searching . . .
Primordium said:
The problem is install anything, i cannot install HSPL or anything else by USB (phone freezes at 0%), trying to install from the microSD the behavior is hanging at Searching . . .
Click to expand...
Click to collapse
Are you trying to install HSPL through HD2 Toolkit, perchance? Have you tried the standalone version? A link to it is here. I would suggest right-clicking and running it as an administrator, just in case. After that, try using the HD2 Toolkit to repartition as MagLdr or CLK. If it's still a no-go, then I don't know.
OK, I just did a search and it came up with a slew of threads that possibly describe your problem. Have you looked at any/all of these and tried the suggestions in them?
[Q] HD2 freezes at 0% during update or flash
[Q] is this HD2 bricked or... need your opinion
Hd2 white screen of death
HD2 Bricked?HELP?
[Q] How to "unbrick" HD2?
HD2 stuck on custom boot screen and won't flash anything in bootloader
my htc hd2 is STUCK.. HELP ME PLS
[Q] Htc hd2 stuck on white screen
[Q] Unable to flash any ROM!
I realize that not all of them describe your situation perfectly, but the replies may still be helpful. There are a lot of things to try. I would read each of them carefully and try them all (as well as check that, the ones that you've already tried, you did the right way).