Database Users

How to flash from SD card ?

I know apparently this isnt the best way to flash your HD2, but im stuck without any access to windows. (mac user)
i cant seem to find step by step instructions on how to do this properly....
is there a link somewhere i can get to so i can figure this out? isnt it as simple as copying the custom.nbh file to the root of my memory card, and entering the bootloader screen?
Sorry for all the noob questions.

take ruu_signed.nbh, copy it to sdcard formatted fat32 (2gb cards seen to work best) rename it leoimg.nbh, boot to bootloader and it should detect the image and ask if you want to flash.
it still requires hspl, unless you have a goldcard(easier to borrow a pc for two minutes to apply hspl than make a goldcard)

the phones already been flashed with hspl.
i just want to change the rom!
Thanks for the tips im going to go for it right now

newnoise1024 said:
the phones already been flashed with hspl.
i just want to change the rom!
Thanks for the tips im going to go for it right now
Click to expand...
Click to collapse
Hi
One advice you have to remember is DO NOT flash any official rom with this method. If you do it will replace the hspl and you will be stuck.
Good luck

sabes143 said:
Hi
One advice you have to remember is DO NOT flash any official rom with this method. If you do it will replace the hspl and you will be stuck.
Good luck
Click to expand...
Click to collapse
True, flashing a stock rom via sd card will overwrite hspl with the new stock spl, but you will not necessarily be stuck. That used to be the case before hspl2, as the original hspl only worked with spl 1.42.0000. HSPL2 now works with 1.42.0000, 1.66.0000 or 2.08.0000 spl's.

or just throw your mac away and buy a PC

What many forget is that you actually need an SD card and not SDHC, as those will not work.

understand u already flash hspl,
microSD / microSDHC will work as long it is formatted with FAT32 fs.
just copy the *.nbh to SD root & rename it to LEOIMG.nbh.
enter bootloader, follow on-screen.
if bootloader cant find any rom image, run scandisk & try again.
gd luck.

I just flashed this rom.
It seemed to be fine. It installed and looked a-ok.
I had a look around and every thing looked as it should.
I added "26.4 column Start menu.cab" and now the phone won't reboot at all.
It gets to the HTC white screen, and then hangs.
Any ideas?
Is it a conflict between the 4 columns app and the ROM?

url_paul said:
I just flashed this rom.
It seemed to be fine. It installed and looked a-ok.
I had a look around and every thing looked as it should.
I added "26.4 column Start menu.cab" and now the phone won't reboot at all.
It gets to the HTC white screen, and then hangs.
Any ideas?
Is it a conflict between the 4 columns app and the ROM?
Click to expand...
Click to collapse
when you say "just flashed this rom", what rom?
also, did you read ALL the first few posts in the chefs thread? chances are it requires a specific radio version
either that or you didn't do a hard reset after you flashed.

apologies, I replied in here when I thought I was in the HTC Energy thread.
The device rebooted after the flash.
Does that not count as a hard reset?

samsamuel said:
Is it T Mobile usa? if so, then you have flashed an incompatible rom.
tmous (T Mo US) phones will opnly take roms based on 2.10, the rom you have installed is 1.66 (D 1. 66. Kumar)
Kumar has a rom in the Tmo US section based on 2.10, you should use that, not the one in teh normal hd2 section.
With power off, press and hold "volume down", tap the power key and continue to hold vol down until you get the three coloured screen, connect to usb, wait for word 'serial' to become 'usb' and flash a compatible rom.
Click to expand...
Click to collapse
I've just been digging through and saw this, I have the 3 colours and USB.
Gonna try and reflash and see what happens.
These forums own!
edit: re-flashing it went the same way, would hang on boot.
I've gona back to using:
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
for the moment.
I'll look and see what it is I missed that stopped the energy rom from working as advertised.

Try installing the recommended Radio
url_paul said:
I've just been digging through and saw this, I have the 3 colours and USB.
Gonna try and reflash and see what happens.
These forums own!
edit: re-flashing it went the same way, would hang on boot.
I've gona back to using:
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
for the moment.
I'll look and see what it is I missed that stopped the energy rom from working as advertised.
Click to expand...
Click to collapse
I ran into the same problem and all I had to do was to get the phone into Bootloader and then flash the radio recommended by ROM Cook.

also the same problem
I have also this problem, but I think it's in the rom, when I installed the rom, everything seems ok, but after a reset, the screenthat I get is the white HTC screen.
After a hard reset it is ok, but after a reset it is the same problem.
Then I thought, i take an older rom, but when I've installed the rom he is automatic installing the cab file's at the end of the installation, and he's going to automatic reset the HD2. After the reset I have the same problem as with the new rom.
So the biggest problem is that I can't install another rom or radio because the rom don't start for 100%, and when I do a hard reset, after the reset at the end of the installation I get the white HTC screen.
What can I do, can I fix this problem?

groot321 said:
I have also this problem, but I think it's in the rom, when I installed the rom, everything seems ok, but after a reset, the screenthat I get is the white HTC screen.
After a hard reset it is ok, but after a reset it is the same problem.
Then I thought, i take an older rom, but when I've installed the rom he is automatic installing the cab file's at the end of the installation, and he's going to automatic reset the HD2. After the reset I have the same problem as with the new rom.
So the biggest problem is that I can't install another rom or radio because the rom don't start for 100%, and when I do a hard reset, after the reset at the end of the installation I get the white HTC screen.
What can I do, can I fix this problem?
Click to expand...
Click to collapse
RTFM. These constant posts about white screen hangs are really getting frustrating. Does nobody follow the forum rules of searching any longer? There's nothing wrong with the rom, the user on the other hand I'm not so sure of.
YOUR RADIO VERSION IS WRONG

url_paul said:
I've just been digging through and saw this, I have the 3 colours and USB.
Gonna try and reflash and see what happens.
These forums own!
edit: re-flashing it went the same way, would hang on boot.
I've gona back to using:
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
for the moment.
I'll look and see what it is I missed that stopped the energy rom from working as advertised.
Click to expand...
Click to collapse
If you bothered to read even just the last 5 pages of the Energy thread you would have seen probably 20 mentions of the problem. Energy rom won't work with a x.xx.51.xx radio.

[q] i need some help!

So earlier today i got my hands on a t mobile htc hd2 off a friend. So the phone has problems i guess, not sure what the problem is hoping maybe someone experienced enough here that could help me out with procedures on how to fix it. i've attached pictures of what it looks like when i turn my phone and try to boot from sd card.
i try to use this file to flash my phone. xxx.2shared.com/file/MAsa78Yo/leoimg.html
please any help is really appreciated.

anyone care to help? please

anl617 said:
So earlier today i got my hands on a t mobile htc hd2 off a friend. So the phone has problems i guess, not sure what the problem is hoping maybe someone experienced enough here that could help me out with procedures on how to fix it. i've attached pictures of what it looks like when i turn my phone and try to boot from sd card.
i try to use this file to flash my phone. xxx.2shared.com/file/MAsa78Yo/leoimg.html
please any help is really appreciated.
Click to expand...
Click to collapse
You need to read through this a few times and eventually Hard-SPL the device (allowing you to flash cooked/custom ROMs on the device).

You need to read through this a few times and eventually Hard-SPL the device (allowin
so install the hspl file on to my hd2 sucessfully. when i try to install the rom it would freeze up around 42 percent the first time i try to install. the second and few times after it went into recovery mode it didnt make it past 16%. can some one help me out ? i was trying to install the energy leo cookie rom for tmboile.

try flashing a cooked rom, in the hope that it doesnt try to flash the radio, since it looks like its the radio causing problems. (This isn't the only thread with the dreaded 'RSA Fail' next to teh radio.)

[HELP NEEDED] Stuck in white bootscreen with no connection

Hey all,
Maybe someone can help me out.
Two weeks ago i installed andoid on my HTC HD2.
I used HPSL, radio 2.15.50.14, MAGLDR112 and NexusHD2-Gingerbread_V2.1_NAND. A few days ago, without any reason i got a white bootscreen and i still have it
What a did so far:
* New HSPL3, but the radio didn't connected anymore, error 270.
* A new MAGLDR, i reached 100% in a blink, but then an error 270.
* Using a SD with the original leoimg, i get a (00018003 radio fail) error after a few % and the update failed.
* task29, but again no connection. (after 5 min error 262)
* new USB drivers installed for windows 7 and i also tried it on an windows Xp computer.
So far i only reached my 4 colored screen with:
PB81100 HX-BC
SPL-2.08. HSPL 8G XE
0x05
CotullaHSPL 0x30
* The original rom was RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Last question, how can i check that the batttery is stil oke for flashing.
Anyone who has a clue what to do?
Thanks in advance.
greetz!
Rob

Mate, I think you´ve done everything. HSPL and Radio ROM versions correct etc.
Since I see more and more people reporting similar problems like you, I get the feeling that some Android builds might have some strange effects on Radio ROMs.
There are too many people with SPL and Radio ROM problems, eg. stuck in bootloader or at the white startup screen.
This didn´t happen at this pace before Android NAND.
Only 1 question though:
Did you try to flash the original ROM using RUU.exe, SSPL or LeuCustomRUU via USB, without having the SIM and the SD card inserted? In rare cases, either one or both were trouble makers...
EDIT: Second question:
What kind of SD card did you try? Bigger cards seem more problematic, too.

I used a 2 gb micro SD card to go back to the original Rom.
I didn't tried to go back to original ROM using USB, because of the connecting problems. So that i'm gonna do now. Any suggestions which to use best?
After your post i tried to the flash with (and without) the formatted sd and the simcard, unfortunatelly i didn't work.

For last your question i can say that connect your phone to PC when it is off. Then keep down "volume down" button and switch on your phone. You get 4 colored screen. On bottom you can see USB word. Let phone for minimum 1h. And you get more 50% charged battery.
After hour you can flash back to original rom or to MAGLDR and forward normally flash android nand. You dont need disconnect or switch off before flash your phone.
Hope helps.

@tictac0566
Thanks for the options!
I tried the options mentioned in question 1, the problem is the connection USB/Radio. SSPL seems to work, but after 1% again connection error.
After a few test it must be the radio.
I tried to flash only a new radio using LEOIMG, after 99% i get the same error as LEOIMG an original Rom (00018003 radio fail)
With HPSL3_PKG i also can't go back to SPL 2.08.000.
So the problem must be there.
Anyone has an idea?? Can i use another radio? If yes, than which?
Thanks!

Still no solution
Tried many things, still the radio is not working.
It could be also HPSL3, because i can't go back to spl 2.08 (or any other (h)spl with the app.
Anyone has an idea??

Just trying to help here, but have you tried doing everything from the start?
task29 and everything else?

Hey i seem to have the same problem as you except my white screen wasnt after a flash, it just randomly went white one day and wouldnt boot.
I have tried MTTY, i can connect via usb but after formatting via MTTY and then attempting to flash a new rom (ship and custom) it just stays on 0% and doesnt do anything else.
Sorry to hijack thread just thought whilst people are looking they can help me too

CrAzYiaN said:
Just trying to help here, but have you tried doing everything from the start?
task29 and everything else?
Click to expand...
Click to collapse
Yes i did, this thread is official mine
It must be the radio or else HSPL3_PKG.
Do you have some options??
Thanks in advance!

tomar5e said:
Hey i seem to have the same problem as you except my white screen wasnt after a flash, it just randomly went white one day and wouldnt boot.
I have tried MTTY, i can connect via usb but after formatting via MTTY and then attempting to flash a new rom (ship and custom) it just stays on 0% and doesnt do anything else.
Sorry to hijack thread just thought whilst people are looking they can help me too
Click to expand...
Click to collapse
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.

Abdul9. said:
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Click to expand...
Click to collapse
Thanks for the advice, but all the roms i tried i got a radio fail during flashing with leoimg.nbbh.

Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?

kawazaki said:
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
Click to expand...
Click to collapse
Yes i tried, but mine HD2 stays on SPL-2.08 HPSL.
I used HSPL3_PKG and HSPL2 in different but still SPL-2.08 HSPL.
Maybe there's where my problems are, but i als can be an corrupt radio.
Anyone an other way to back to SPL 2.08.000 or how to fix the radio?

Then your best bet is to flash with a goldcard

Abdul9. said:
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Click to expand...
Click to collapse
Yes i can get into bootloader. I have tried using MTTY task 29 to format the device then i searched on the HTC site for a compatible ROM. Turns out the only one that doesnt give a negative response when i type in my serial number is the ROM from Taiwan. Tried flashing that using the SD card method and the USB method. Sd card method hangs at 0% and i get a connection error in USB method. I have also tried the latest ROM from Dutty.
If a ROM is not compatible how do you know? Does it hang at 0% or does it finish loading and then wont boot from there.
I have even tried flashing just a radio with the same results.
kawazaki said:
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
Click to expand...
Click to collapse
Yes i tried all different types of HSPL and even SSPL. From the bootloader screen i run the .exe from the computer and it goes through and says 'operation finished successfully'
But when i get back to the bootloader it still says the same HSPL, which is 1.66
Also to note when i power on the device i can hear a small 'click' from it. Could be much worse and be a hardware problem?

Still no solution.
Oke guys, thanks for answering my threat so far!
Still trying to get my HTC back to life.
Is it possible that my problem is in HSPL? (see attachments)
After the white screen i tried to reinstall HPSL 2, 3 and 1, but during the instal my HTC reboot (without the signal "We Hacked It"
I also tried different SD card for LEOIMG, still radio fail 00018003.
One thing i didn't tried is using a goldcard, i downloaded the app but i need a working HTC HD2 to make the card.
Anyone?

No you don't, there you go :
http://forum.xda-developers.com/showthread.php?t=874304

Goldcard is the old method to install a custom rom way before HSPL became popular
so if HSPL don't work then Goldcard wont as well but hey you can still try
I think its more of a hardware problem now since all attempts for software repair is not successful. I had the same situation as yours, white screen then radio fail, tried all solutions but still no luck

sameeeeee
i have the same problem 100%
i already try all these solution and no one is worked
however, some one told me that maybe the problem with the Flash memory of my HD2 because he already try to solve / or already solve such problem "but unfortunately he lost the tools he was used"
this tools is can check the memory and told which memory chunk is corrupted
please if any one know this tools or had it please posted it on.....

That app should be Task 29.

Bricked HD2 Leo

Hi every one. I had a problems with HD2, my original ROM was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another ROM, so I tride to flash a new ROM, did a Hardspl2 and now my HD is bricked, with triangle and no ROM also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of ROMs and no luck at least .... Triad also flash with original ROM via Micro SD no luck... Please help me!!!! URGENT!

prieditis said:
Hi every one. I had a problems with HD2, my original room was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another room, so I tride to flash a new room, did a Hardspl2 and now my HD is bricked, with triangle and no room also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of rooms and no luck at least .... Triad also flash with original room via Micro SD no luck... Please help me!!!! URGENT!
Click to expand...
Click to collapse
Firstly its "ROM" not "room".
What do you mean "with triangle" ??
Which HD2 do you have and which ROM did you try flashing?
Can you get into tri-color bootloader mode?

Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device

prieditis said:
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
Click to expand...
Click to collapse
your device is not bricked... get into bootloader and do a task 29 (LOOK IT UP)...
Then start from scratch... Magldr, then whatever ROM you want.

Can you explain me? Please step by step... Thanks in advance

prieditis said:
Can you explain me? Please step by step... Thanks in advance
Click to expand...
Click to collapse
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...

prieditis said:
, my original room was with a lot of problems, it restarted without no reason and so on. ..with triangle and no room aURGENT!
Click to expand...
Click to collapse
... OK, no room = homeless!

If you can't pay rent, I'm afraid I'll have to ask you vacate the area.

Possible fix stuck bricked hd2 radio no rsa information
Please read the whole post first sorry about the mess it is my first post thanks to everyone here on xda who came up with everything i used to do this There is guides for this xda has a lovely list of tmous roms if you are on t mobile in the us http://www.xdafil.es/index.php?path=HD2/TMOUS/
i would start with the RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip
extract the .exe file if it has one than extract the RUU_signed.nbh from the .exe file using win war or 7 zip than rename it to LEOIMG.nbh and place it on a newly formatted microsd not a microsdhc and i had problems with anything over class 4
place it in your phone and hold the volume down button and power button as loading comes up let off volume down power button will start the flash(i was only able to do complete flashes in the freezer if not it would hang or get radio errors)
i also had a tmous which did not want to flash the radio i would get an an error and rsa fail it sounds crazy but i wrapped it in plastic and stuck it in the freezer for a while before and during the flash this was the only way i could install the radio and actually see rgd information on boot screen after this first one you will have an old test rom with an old spl you cannot change to hspl from here i also was not able to go straight to 2.10, i had to step up from RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip, to RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip the same way i did the first one,hard resetting after each one and let it open windows completely to know it is working. than i believe there is an hspl3 file somewhere out there with all thanks to DarkForces Team HardSPL3 by bepe and Cotulla i will try to attach it that will work with spl 2.02 wich you should now be on now you can download your radio in the master radio thread http://forum.xda-developers.com/showthread.php?t=611787
i also just renamed the ruu_signed.nbh to LEOIMG.nbh and ran through sd i seem to have problems through usb and i was trying to be careful with the radio
once you got the radio you want you could flash the rom preferably running task 29 before or get yourself magldr to install through nand i also stuck my laptop an the freezer with the phone to get wp7 completely installed i did all this mess with a phone that had a broken screen i think there is like thermal compound over the processor to the case that is not on right and overheats when not in the operating system like a crappy old laptop with its fans full of stuff trying to install xp. and while a stock rom was being installed the usb was pulled during the radio installation i hope this helps i belive i saw one post to stick it in the freezer out of everything that i think helped the most.i also notice i have to put it in the freezer at boot too sometimes or i will get a fatal hit error i think its just over heating..... i also have an hd2 which has never been opened before that i have never had to stick in the freezer it gets flashed quite abit right now running gingerbread on normal hd2 and wp7 dual boot android 2.2 on the one i had to freeze i hope this helps i was here for weeks reading reading i was stumped cus my first hd2 and g1 were so eazy i will update this post once i stop being lazy and open the phone again to replace the goop to see if that is the problem
Thank you for reading my jumble and thanks again to all you phone heads here on xda which without you none of this would be possible and i would not have wp7 and gingerbread on my hd2 : D

I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)

prieditis said:
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
Click to expand...
Click to collapse
succesfull only one time, now i tried reflash an original rom once again and no results, still stucked in triangle. It's a first time when something like this happens
P.S. Sorry for my english..

spyderman33 said:
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
Click to expand...
Click to collapse
no luck at all I tried it once and have succesfull rom update, but it stucks when started with HTC logo, i tried second time and still no luck. Please help me.. all the time now also for original rom it says that this room is not for that device

original rom
you have to find the original rom shipped with your phone like here i am tmobile usa roms you have to find your carrier and country and start with one of the first ones i started with my second one RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip and i kept getting stuck screens when it was hot turn it off maby find some silica gel (lil rocks that come with everything to absorb water) wrap it in plastic and throw it in the freezer does the back of the phone get real hot during flash

i have shipped original rom, still no luck

not the newest one
you need one of the first test roms this was the only way i got mine to work i had to go from 2.02 to 2.03 to 2.05 hard resetting after each install making sure they completely went in what carrier are you and where are you

Still stuck?
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.

stepthehen said:
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
Click to expand...
Click to collapse
Hi, thanks a lot. Only, SPL for original rom was 1.42000 is it ok to flash with 2.08.000 ? And why i should install MAGLDR 1.3 ? Thanks in advance,

Ok, now i dont understand anything. My original SPL was 1.42, i did Hardspl 3, after that tried flash original rom, process stuck on 96%, after that i tried once again stuck on 9% and says rom not compatible with device. And its like a hidden circle, my phone is acting like that all the time. I tried task29, tried all HSPL, also 1.4200, 1.66 and so on. Can anybody help me? my skype nick is martins.prieditis , maybe someone can assist me?

Ok now its fixed. I did a HSPL4, due to which original rom freeze on 0%, but 3.14 didnt start up on loading OS (white screen with HTC logo))or freeze on 99%. Than went back to shipped 1.42, stock room succesfylly flashed and did a SSPL_RUU. Now the only problem is that my LEO restarts when it gets hot. Any ideas how to fix it?
Thanks all for youre help (regarding my previous issue) !

Overheating??
As mrpoe stated in post 9, One of his phone had to be put in the freezer to be able to flash anything otherwise it will get hot and freeze.
Also the motherboard is most likely broken and you cannot get it to work without freezing or it will keep rebooting...
The best thing to do if you still have warranty is to Keep stock SPL and stock WM6.5 and return for warranty.
It will not function the same again.

[Q] Possibly burnt HD2 - Cannot re-flash radio, magldr or task29

Hello people, I have been going through threads and threads regarding similar problems, but having tried and failed with so many strategies, I will have to bother you all.
So the thing is I was using a CM Jellytime MOD (data on ext) in my HD2, and having frequent hangs and freezes that I thought were linked to LCD malfunction, so I ordered a new screen and digitizer to see if I could save the device. Unluckily, just before these arrived, the HD2 suffered one final freeze, after which every soft reset would give the white blank screen and nothing else. I thought that maybe I should task29 the device and re install the ROM. The bootloader can be still accessed and I re-flashed HSPL with no problems.
But I cannot get to Magldr, as you can imagine, as there is no way to go through the white blank screen. Every time I try to re-flash either the radio (2.15.50.xx), Magldr, or even task29, I get "update errors", and no changes. I tried both using the specific utilities or the NANDtoolkit, to no avail.
I even tried MTTY, which seemed to go well, but did not bring any changes to the situation. It is still the same.
This is my bootloader screen:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
CotullaHSPL 0x05
0x30
Any other info that you think may help I will post it ASAP.
I have read that maybe the NAND has finally died, but I'm not sure and would not abandon the cause without some feedback. Can someone help with this? I will greatly appreciate, I live in Argentina and I don't think I will be able to get another smartphone (I got this one from a good friend who bought himself another one) right now, or ever
If I'm lucky I may be able to sell the LCD and touchscreen replacement, ha.
Thank you all!
pd: sorry if I posted in the wrong thread but I was really confused with the whole subforum arrangement. I moderate a forum and I am aware of how painful it is to start moving threads around.

@leandrox :i recommend removing the sd-card if present, flashing hspl 2.08 again.
Then, flash radio 2.15.50 (even if you tried before, try again now). if that was successful, reflashing magldr should be the success.
Or else...
Also, try putting your hd2 in a freezer, sometimes there may be overheating problems from what i used to see

gilbert32 said:
@leandrox :i recommend removing the sd-card if present, flashing hspl 2.08 again.
Then, flash radio 2.15.50 (even if you tried before, try again now). if that was successful, reflashing magldr should be the success.
Or else...
Also, try putting your hd2 in a freezer, sometimes there may be overheating problems from what i used to see
Click to expand...
Click to collapse
Hello @Gilbert, thanks for helping with this.
I have tried each flash with the SD and the SIM out, as I have read around about both interfering with flashing. So I guess that's not the problem.
I will try the "pre-cooling method" and tell you how it goes.
Is there any chance I should remove HSPL before re-flashing it? Also, does the battery charge while connected in bootloader mode? Because I am afraid I will finally run out of power througout the try and error processes.
Thanks again.

leandrox said:
Hello @Gilbert, thanks for helping with this.
I have tried each flash with the SD and the SIM out, as I have read around about both interfering with flashing. So I guess that's not the problem.
I will try the "pre-cooling method" and tell you how it goes.
Is there any chance I should remove HSPL before re-flashing it? Also, does the battery charge while connected in bootloader mode? Because I am afraid I will finally run out of power througout the try and error processes.
Thanks again.
Click to expand...
Click to collapse
not sure about removing hspl... you can try that tho. as for battery, you're probably right. there's a possibility it runs out of power.
did you try flashing stock rom from sd or usb? (emphasizing on sd method)

gilbert32 said:
did you try flashing stock rom from sd or usb? (emphasizing on sd method)
Click to expand...
Click to collapse
I guess that would be the next wise step (and I'll do it with the right pre-cooling in the freezer).
Correct me if I'm wrong:
- I need a FAT32 (?) formatted SD.
- Then copy the official nbh to the root of the SD, renamed as "leoimg.nbh". (still looking for the correct download; maybe here o here?)
- Enter bootloader screen, with the SD on. After a little while, it should read "loadng" and the flashing can begin.
After this, hopefully, has worked, I should be able to:
- Reflash HSPL 2.08
- Reflash latest radio if needed.
- Reflash Magldr and Clk
- Install new Android ROM
... but I'm looking way ahead my actual hopes
EDIT: I could not download the ROM from any of the quoted sites. Maybe someone can indicate to me the right ROM from this list: http://shipped-roms.com/index.php?category=windows mobile&model=Leo
My model is the 576 RAM one.

leandrox said:
I guess that would be the next wise step (and I'll do it with the right pre-cooling in the freezer).
Correct me if I'm wrong:
- I need a FAT32 (?) formatted SD.
- Then copy the official nbh to the root of the SD, renamed as "leoimg.nbh". (still looking for the correct download; maybe here o here?)
- Enter bootloader screen, with the SD on. After a little while, it should read "loadng" and the flashing can begin.
After this, hopefully, has worked, I should be able to:
- Reflash HSPL 2.08
- Reflash latest radio if needed.
- Reflash Magldr and Clk
- Install new Android ROM
... but I'm looking way ahead my actual hopes
Click to expand...
Click to collapse
Correct. don't forget that the sd should be between 1 and 8 gb in size (that's what i remember, larger sizes could do weird stuff)

gilbert32 said:
Correct. don't forget that the sd should be between 1 and 8 gb in size (that's what i remember, larger sizes could do weird stuff)
Click to expand...
Click to collapse
Thanks Gilbert! now I have work for this evening. Tomorrow morning I'll let you know how it went.
But I could not download the ROM from any of the two sites I quoted above. Maybe you can help me choose the right ROM from this list: http://forum.xda-developers.com/showpost.php?p=46839373&postcount=837
My model is the 576 RAM one.

leandrox said:
Thanks Gilbert! now I have work for this evening. Tomorrow morning I'll let you know how it went.
But I could not download the ROM from any of the two sites I quoted above. Maybe you can help me choose the right ROM from this list: http://forum.xda-developers.com/showpost.php?p=46839373&postcount=837
My model is the 576 RAM one.
Click to expand...
Click to collapse
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe this is the one i used IIRC

Ok @Gilbert, here's the update. No good news so far.
I tried flasing the mentioned official ROM from SD card and I get the "Update terminate / Update failed" message when installing. I also tried with a custom RUU but I got the same message.
I have been reading this thread where some guy apparently had the same problem and fixed it:
"After that I made a new goldcard using Duttys Leo Sense 2.5 Multi-Lang. "
http://forum.xda-developers.com/showpost.php?p=5384679&postcount=68
but I cannot understand what this actually means. I downloaded the mentioned Dutty ROM but it is a cab file that I don't know how to flash to the HD2.
I still have a tiny hope that the phone may actually come back to life. Again, thanks a lot for helping!

leandrox said:
Ok @Gilbert, here's the update. No good news so far.
I tried flasing the mentioned official ROM from SD card and I get the "Update terminate / Update failed" message when installing. I also tried with a custom RUU but I got the same message.
I have been reading this thread where some guy apparently had the same problem and fixed it:
"After that I made a new goldcard using Duttys Leo Sense 2.5 Multi-Lang. "
http://forum.xda-developers.com/showpost.php?p=5384679&postcount=68
but I cannot understand what this actually means. I downloaded the mentioned Dutty ROM but it is a cab file that I don't know how to flash to the HD2.
I still have a tiny hope that the phone may actually come back to life. Again, thanks a lot for helping!
Click to expand...
Click to collapse
then, try making a goldcard, and flashing a stock .nbh
for info about creating a goldcard, you should google it, i did recently and it was a bit harder then first time i did it (3 years ago)

gilbert32 said:
then, try making a goldcard, and flashing a stock .nbh
for info about creating a goldcard, you should google it, i did recently and it was a bit harder then first time i did it (3 years ago)
Click to expand...
Click to collapse
OK. Back to work then.
I will follow this tutorial. But I see I need an ActiveSync/MobileDeviceCenter connection. I don't think you can do that when you have no OS on the phone, right? Can I do this while in the bootloader?
Should I take any additional precautions attempting the process from W8-x64?
EDIT: It seems I need another phone to put the microSD on so I can get the correct CID with RevSkills (apparently you need the device to be connected through the MobileDeviceCenter or it fails). Then I may be able to ask someone else to get me a goldcard for said CID.

leandrox said:
OK. Back to work then.
I will follow this tutorial. But I see I need an ActiveSync/MobileDeviceCenter connection. I don't think you can do that when you have no OS on the phone, right? Can I do this while in the bootloader?
Should I take any additional precautions attempting the process from W8-x64?
EDIT: It seems I need another phone to put the microSD on so I can get the correct CID with RevSkills (apparently you need the device to be connected through the MobileDeviceCenter or it fails). Then I may be able to ask someone else to get me a goldcard for said CID.
Click to expand...
Click to collapse
I remember there being tutorials for making a goldcard, that need to have a microSD adapter only, no other device, and others that tell you how to get cid from an android phone.that doesn't require PSAS like in the tutorial you're following

gilbert32 said:
I remember there being tutorials for making a goldcard, that need to have a microSD adapter only, no other device, and others that tell you how to get cid from an android phone.that doesn't require PSAS like in the tutorial you're following
Click to expand...
Click to collapse
I got an adapter I can put in my old PDA and get the microSD CID. @Gilbert, can you prepare Goldcard images? In the tutorial there are some users mentioned that are supposed to do it, can you recommend any of them so I can ask them for it? Thanks in advance

leandrox said:
I got an adapter I can put in my old PDA and get the microSD CID. @Gilbert, can you prepare Goldcard images? In the tutorial there are some users mentioned that are supposed to do it, can you recommend any of them so I can ask them for it? Thanks in advance
Click to expand...
Click to collapse
making goldcard is easy...
i remember getting cid and writing it reversed to http://huygens.hoxnet.com/goldcard.html (choose reversed cid iirc), downloading goldcard.img, opening sd with some hex editor (hxd i recommend) and writing goldcard.img content to it
you should read the tutorials available online, as what i said could be a lot wrong

gilbert32 said:
making goldcard is easy...
i remember getting cid and writing it reversed to http://huygens.hoxnet.com/goldcard.html (choose reversed cid iirc), downloading goldcard.img, opening sd with some hex editor (hxd i recommend) and writing goldcard.img content to it
you should read the tutorials available online, as what i said could be a lot wrong
Click to expand...
Click to collapse
I have tried to flash the phone with the Goldcard through this method. I am wondering wether I should expect something different after the bootloader starts, because I just get to the same point as I did when trying to flash it without the Goldcard, and getting the same failed "update terminate / update fail" message. Maybe I did not prepare the Goldcard well. Or maybe the phone mainboard ROM/NAND is simply ruined :crying:

I have to assume that the radio must be bricked. From what I read, this is the only thing that can actually brick your device when you still can get to the tricolored bootloader. Everytime I try to flash a ROM, it fails while flashing the Radio, so there has to be a hardware problem that prevents it. I still wonder how that happened.
I was running JellyTime, and then all of the sudden the phone froze and then just didn't turn on again (blank white screen). Can overheating ruin the NAND or ROM? Should I consider this battle as lost? I am so disappointed...
I read about one user who concluded that all you can do is flash a ROM with no radio, and keep the phone only as an Android device (no phone use). He told me I should get a dev or cooker to cook a radio-less ROM so I can do that. Does anyone know if there's a ROM like this I could use?