Often, after successfully connected to Kies and syncing started, I see the message that says "Value Does not fall within the expected range", preventing me from proceeding further.
Anyone else having this problem and knows how to deal with it?
Whenever it is a question on KIES people here never come up. I dont think anyone here really are bothered to try Kies except that they are all busy playing with Odin and flashing unofficial ROMs
Related
Hi guys,
I have been lurking XDA for a while, this is my first post.
I love my X10, despite some major flaws. Right now, I don't know what causes it but the X10 keeps hanging up calls at random. I will have to redial every 2-3 minutes, sometimes less. I hear a beep, and the call just ends. This clearly an issue on my side. I don't know whether the proximity sensor is malfunctioning or what, but it is as if I pressed end call. My face is not touching the end call button, but somehow this happens very frequently, it is very annoying. Any insight into this issue will be appreciated.
I have another issue to deal with, updating the software to the R2BA020 versus the R1FA014 currently on my phone. An attempt to update over the air results in "Software is up to date". Using SEUS, I am told to hold the back button and connect the micro-USB. I did that and nothing happens.
I tried using PC companion to repair the current state of the software, it asks for the same back button and USB connection. I tried it, then after the phone booted up, I was instructed to mount the phone. I mounted the phone and the program went back to the USB connection after holding the back button. I am stuck in this loop, don't know what to do.
My phone is from Rogers in Canada. It is an X10a. I hope you guys can help, I am not stupid with technology whatsoever, but I can't figure out how to solve these issues.
Thanks.
i dont know about the hang up issue but i do know when the SEUS updater tells you to put the phone back to pc and mount it, you don't actually have to
I do not see how the program will proceed to the next step though. It is at the "Prepare" stage.
Ok, I figured out the updating issue. I just had to move onto a different computer as my laptop has issues with the USB drivers and whatnot, detecting mass storage devices incorrectly.
I updated to the latest firmware, and notice absolutely no difference......so far. lol
Back to the dropped calls issue, I have had about 3-4 calls each less than 2 minutes long, and no random hang ups as of yet. I will update this thread if anything occurs.
Thanks for the help, appreciate it.
Having read your first post I was just about to reply and say try a different PC/Laptop. Had same thing with my netbook so moved to PC and went thru no probs.
Hope your call problem is resolved too.
Are you using ANY kind of TASK KILLER/PROCESS KILLER etc!?
these could be cutting your calls short if you have added stuff you are not sure of!
Hi All,
Just tried buying an app from the marketplace and got this message:
"Can't get this info right now..."
I just spent about an hour searching various forums, and there seems to be a real difference of opinion about what this message means. Some posters suggest that it indicates a problem at MS's end (i.e. they're doing maintenance, something is wrong with Windows Live etc), and so the best thing to do is sit tight. Others seem to think it is user problem, and you need to reset the phone, clear the history in IE, turn on/off cookies in IE, etc... Given I didn't change anything on my phone and this just started happening for no obvious reason, I'm inclined to think its an MS problem. Anyone else dealt with this? Advice would be helpful as I don't want to waste time trying all the suggested solutions online...
I am having this same problem. It just started about 2 days ago. Saw all the same suggestions you mentioned, but none solved it.
I have not tried a factory reset, but it seems like an MS server issue.
I ended up doing a factory reset, but that didn't help. I think the problem is that I was using a US-based live account in Canada, and somehow the phone decided to lock me out of the marketplace due to my non-US IP address. Ended up resetting the phone again and then setting it up with a Canada based live account. Now everything is fine (although I have no access to the Zune marketplace). I wonder if the Feb update did something...
May also have something to do with the purchase validation cookie that sits on the phone...
Is anyone else still having problems downloading apps from the marketplace? When I tap install button I keep getting the message that says "Can't get this info right now. Check back in a little while" Is anyone else having this same issue today? This is the first time I've ever had issues with the marketplace, I've had this phone for almost a month. Seems like it's on Microsoft's end, any help would be greatly appreciated!!
Seem to be other people on the XDA main forums having the problem...
Well whatever was causing the problem seems to have been fixed. I'm now able to download apps again =)
Hey Guys....
I have a Bell Atrix that i put on the rogers network, it's been working fine but i can't seem to get the OTA update for gingerbread. I've searched through the forums and couldn't find anything like the issue i'm having.
When i go to system updates it goes into the "checking for available update" but it never finds anything and it never stops. I've kept it on for hours but never gets past that point.
I've tried it on wifi on 3g pulling the battery on the phone for a reset but it never gets past there. Every once in a while it will say "check for update was not available at this time please try again later".
I also tried the manual checkin method #*#* (whatever those numbers are) and it didn't help either....
any ideas besides doing a factory reset ??
I have been patiently ignoring the prompts popping up every fifteen minutes imploring me to update to the new improved (non-rootable) OS. Since I love root too much, I just keep clicking remind me later.
In the last day, I'm now getting another update prompt. This one doesn't list the details of the major HC update (version and size), just says there is an update available. Any idea what it is?
No clue but I disabled automatic updates weeks ago to avoid having to consistently close it every time I wake my tablet up. Not sure why you're leaving yours on if you're not going to install it - disable it and be done with it. When you're ready, turn it back on and download it [if that ever happens].
Never the less, whatever that prompt is for, there's no doubt in my mind that you will have to update to 3.2 before applying it. Also, it could be an older 3.1 update you never picked up. Search around.
Hi,
I updated my Nokia 6 early yesterday morning, February 21st. The update was 1,7GB in total, don't know what it consisted of. The update came to my phone through standard automated update check, I got a notification to connect to WiFi, I did, the update downloaded and installed.
Apparently, it was the Android Pie update, though I didn't look that closely.
So, 100% stock ROM, no mods, fully official update method. No tricks. Connected to wall, 100% battery.
After the update the phone booted and asked to reboot to install operator updates. I'm not quite sure the exact wording of the message pop-up, but that's what it asked as far as I can remember. I agreed to reboot, the phone shut down, and never came back to life again.
It won't respond to any key presses. It's completely bricked.
I'm going to get it fixed in a shop, where it'll go to have its display changed anyway. I'm writing this here to ask, has anyone else had troubles with the update? It was rolled out in Finland apparently February 21st or 20th, or then I haven't reacted to the notification before. I'm quite unhappy with the state of the matters, since it seems to be the official update that bricked my phone.
So, anyone had any troubles with Android Pie update?
Mine bricked 2 days ago after the same Android pie update, 1.7 GB. I have tried flashing to no avail. Currently looking for ways to restore a bricked Nokia 6 TA-1021.
rwaithera said:
Mine bricked 2 days ago after the same Android pie update, 1.7 GB. I have tried flashing to no avail. Currently looking for ways to restore a bricked Nokia 6 TA-1021.
Click to expand...
Click to collapse
According to the service personnel, a small wonder happened when they plugged in my TA-1021 - the device started right up. It's quite extraordinary claim, since my phone was connected to my charger when it shut down, and it was showing 100% battery.
I have no reason for this, only speculation. The only explanation I can come up with outside of some divine intervention is, that the phone did not shut down after all. Instead, it was stuck on some loop with screen off and buttons inoperative. When it finally ran out of battery, it responded right away when it received more power.
I did not try and flash my phone myself. Nor did they flash it in the shop. It wasn't necessary, the phone is now fully functional.
Maybe try to plug it in briefly and see what happens. If nothing, then just unplug it again and try another time tomorrow. Btw. HMD Global's chat support was very responsive, so I highly recommend contacting them if you suspect that your case was caused by the updater itself.
Mine didn't get bricked, but it started having issues with Google accounts. After the update, all apps which use my Google account to login had login errors & I couldn't add Google accounts onto the device. I manually synced the account, removed the account & tried to add it again (shows a "sorry something went wrong" message everytime I try to add an account), wiped the cache, even factory reset it, but nothing helped. I finally had to spend some time learning how to downgrade it & was able to add accounts on the device again. But after I updated my device with Android 9 (V6.12) again, the issue came back.
my all google apps arent working on TA-1000
mine is completely bricked. wont turn on at all. TA-1033.
Is there anyway to fix this?