*** Updated and added new pictures on this post and post no3. ****
Since I could not find anything on the web about disassembly, I jumped in head first and it came apart pretty easy. The biggest mystery was trying to take the LCD housing apart because there were no screws showing. But after some investigation I noticed there is a textured tape like covering on the ends of the bottom part of the LCD housing, which is covering 4 screws! The replacement of the digitizer was pretty simple because its only attached to the housing not the display (LCD)! So this removes the worry about breaking the lcd display. I did pull a 4pin connector for the side volume control off the board ,while trying to disconnect it, so I having a tricky soldering job ahead of me.
Update: I forgot to mention about using a hair dryer to loosen the glue that holds the digitizer to the housing, this makes a much easier job of removal. Thanks: jetcitydevices, see his post http://forum.xda-developers.com/showpost.php?p=7983391&postcount=41 for more details
There's really no reason for this to be in its own thread, considering you already started one thread on this same topic...you could've just continued the conversation in that thread since it IS about the exact same thing....no need for duplicate posts, plus posting duplicate threads is against the rules. Please read the stickies if you are unsure of forum rules on posting....
Please also report this thread to the mods to be deleted, then carry on your convo in your original thread...thanks!
-BMFC
Sent from my ROOTED myTouch3G Slide
More picture of lcd housing disassembly.
This is great I have been searching for a disassembly thanks hope to see more pics soon
Sent from my T-Mobile myTouch 3G Slide using XDA App
I will have some more pictures with some notes soon.
Great job! Hopefully I never have to open mine up, but if I do, I'll use this as a guide.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Can you give us some close-ups of each section?
Thanks
yeah man, give it your best. so far, this is the ONLY MTS disassembly online, PERIOD! add steps and pics plus some close ups. would be nice to have as a bookmarked reference guide.
oh btw, be careful with the lcd if you wanna go that far. they can (and will be!) be a *****. all the ribbon wires plus the sealant on the glass is extremely fragile.
wow, good thing i found this....this is the only one i found. did u buy the digitizer off ebay? i need to do the lcd also....
Yep I got it from a ebay store called gadgetfix and they have great customer service if you have a problem.
Also I have updated one of the pictures in the first post with info about removing the 4 pin ribben cable.
That's the only one I found on ebay. Did it come with tools?
Ya that's the same one in ebay I found....did it come with tools?
mulletcutter said:
Ya that's the same one in ebay I found....did it come with tools?
Click to expand...
Click to collapse
No tools were included, but all you pretty much need is jewelers screwdriver set and torx but i think the jewelers might even work for the torx screws too.
mmone3 said:
No tools were included, but all you pretty much need is jewelers screwdriver set and torx but i think the jewelers might even work for the torx screws too.
Click to expand...
Click to collapse
Then that guy lied, he said tools are included. I have to get a new lcd also, is there anything to swap over or is it just plug and play
My sim card slot is broken, could i replace it with the one in my G1?(Sim cant be read)
mulletcutter said:
Then that guy lied, he said tools are included. I have to get a new lcd also, is there anything to swap over or is it just plug and play
Click to expand...
Click to collapse
The lcd should be plug and play, looks like its just connected to the top and bottom boards.
Ace42 said:
My sim card slot is broken, could i replace it with the one in my G1?(Sim cant be read)
Click to expand...
Click to collapse
Sorry I cant help with the sim card problem, i have never had a g1.
Ace42 said:
My sim card slot is broken, could i replace it with the one in my G1?(Sim cant be read)
Click to expand...
Click to collapse
you should definitely warranty it
Phone screen compatibility question
I have been searching for screens of the same size as the slides screen but with I higher pixel density and I found that samsung makes a phone "Samsung Armani B7620" that has a 3.5 in screen. I was woundering if there was a way we could take that screen and use it with the slide.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Hey mmone3,
Good job! Looks good! Keep it up... I would suggest just going to your local hardware store and buying a torx screwdriver. Thats all you really need... there is a plasic tool us cell techs use. Its basically a plasic flathead screwdriver and could be replaced with a guitar pick and also a metal awl which can be replaced with an ice pick. Those are for prying snapped-in plastic housing. And yeah... I told you the lcd is pain! Lol... I havent taken apart the mts yet but have opened hundreds of phones. They can be tricky but it helps if your a tech and can reach on your store shelf and pick up a front lcd housing or a ribbon if you break one by mistake
Just ordered my digitizer/lcd screen....hopeful I won't break anything taking it apart. You should make a video
Related
Ok so my Nexus One got a few Dings and scratches nothing critical or crazy. but I'm really picky about my phones looking New so I invested on buying a N1 housing on ebay and I wanted to know any pointers from people that done this before. I do have some experience on changing housings but where I'm hesitant about taking apart the digitizer since its glued I believe to the middle part and people are just putting double sided tape to hold the thing together which in my opinion it doesn't last. So maybe you guys got better pointer than people I see on youtube and other blogs. Thanks
How would you source a new housing without spending at least $200, if you don't mind me asking?
I got my housing on ebay for 45.00 for battery door bottom part and the middle housing. Now if i brake anything inside it will cost me alot more than 200.00.
Sent from my Nexus One using XDA App
If you are just replacing the housing you do not have to do anything about the digitizer/lcd. You just pull it out of the old and put it in the new. I did this recently with my N1 and am very happy with my shiney new looking phone. There are plenty of videos on youtube to step you through the process just be patient and careful. The hardest part for me was the connectors for the docks in the bottom back plate.
Sent from my Nexus One
paperecho said:
If you are just replacing the housing you do not have to do anything about the digitizer/lcd. You just pull it out of the old and put it in the new. I did this recently with my N1 and am very happy with my shiney new looking phone. There are plenty of videos on youtube to step you through the process just be patient and careful. The hardest part for me was the connectors for the docks in the bottom back plate.
Sent from my Nexus One
Click to expand...
Click to collapse
You made my day! I was having a hard time finding a video to confirm that. most people replace the broken digitizer or they just disassemble the phone without taking the digitizer off. Now I'm just waiting for my housing to arrive from China.
the bottom cover part(not the battery door) was a little easier to take off than i expected but it was tough though. I used a pry tool like this http://www.accessorygeeks.com/pry-tool-plastic-case-bu.html
Highly suggest picking one up.
For the bottom piece across the top part there are three little tabs that you pop up then in think two little ones you have to work downward on the sides then it will slide off.
replacing the aluminum unibody part does require a full disassembly.
http://forum.xda-developers.com/showthread.php?goto=newpost&t=1054682
Check out the site linked in my post there. Any use to anybody?
DirkGently1 said:
http://forum.xda-developers.com/showthread.php?goto=newpost&t=1054682
Check out the site linked in my post there. Any use to anybody?
Click to expand...
Click to collapse
http://cnn.cn/shop/google-c-976.html this is where I bought few things before but not for my Nexus One
Thanks for all your help guys !! I got my housing today and replaced it is hard but not as hard as I thought your tips helped alot
I did it 2 days ago, pretty easy, do take care of the power button though
Has anyone done this? I got myself a used MyTouch 4G with a couple small scuffs on the bottom. Not a big deal, but I think I would prefer the phone in white. There are some white housings available on ebay for $30 which isnt a bad price, but before i buy it, are there any videos/tutorials anywhere that show how to take it apart and replace it with the new housing?? I couldn't find any on youtube.
Thanks!
Look for mytouch 4g disassembled on YouTube
Sent from my HTC Glacier using xda premium
Here's a thread that was discussing more or less this. Hopefully this will help you enough to do what you wanted. The OP has one video and i think there was like one or two more scattered throughout the thread.
http://forum.xda-developers.com/showthread.php?t=961252
Awesome! Thanks guys! That second video in the link is awesome! Though the housing on the ebay listing looks like an entire shell, and the video doesnt really show to do that
I think I'll have to hold onto the idea of replacing the housing until someone else does it first....
According to the second video in the link just the plastic colored piece looks pretty easy to replace/change (the 3 screws + safe pry tool). If I could find the plastic piece of cheap I would be willing to try it
nba1341 said:
According to the second video in the link just the plastic colored piece looks pretty easy to replace/change (the 3 screws + safe pry tool). If I could find the plastic piece of cheap I would be willing to try it
Click to expand...
Click to collapse
if you do, could you make a video on youtube of it?
Hi,
after my wife dropped my phone (accidently she swears) I have some small scratches on the phone. (See Picture below)
Someone knows some ACME Cleaner&Scratch remover for that?
Greetings .. seems that I have had the HD2 for the longest time ...
OOO!! Ouch! Looks like it's time to see the phone doctor. Or, if you feel brave enough, you can fix it yourself. They have replacement screens on ebay. Since you have the EU model the contacts for the screen and the digitizer are soldered together. So you have 3 options. 1. Take it to someone else to fix it. 2. Attempt to order just the digitizer and if you have some time and surgical skills solder the contacts yourself or, 3. Get a fully assembled LCD and digitizer that is already soldered together and swap them out. The cheapest would be to just get the digitizer but if you have to factor in the time and headache of soldering those tiny contacts together, I think getting the assembled parts would be my choice. The US T-Mobile model has a small plug-in type connector on it so there is not soldering. I replaced mine and it is quite a chore. You have to be very careful and don't rush it or you will break things. Good luck!
Yeah you've got more than scratches there! You've got a smashed screen
You'll have to replace the glass
the guy above stated pretty much everything you need to know but here's a link to a lcd+digitizer combo that is fairly cheap: http://www.ebay.com/itm/New-LCD-Dis...192999?pt=PDA_Accessories&hash=item45fdf14d27
I know guys, the scratches where just kidding
The complete replacement has been ordered already, will fix it by myself
RollerCoasting said:
Yeah you've got more than scratches there! You've got a smashed screen
You'll have to replace the glass
the guy above stated pretty much everything you need to know but here's a link to a lcd+digitizer combo that is fairly cheap: http://www.ebay.com/itm/New-LCD-Dis...192999?pt=PDA_Accessories&hash=item45fdf14d27
Click to expand...
Click to collapse
He was being sarcastic with the 'scratches' thing :L
MasterMerlin said:
I know guys, the scratches where just kidding
The complete replacement has been ordered already, will fix it by myself
Click to expand...
Click to collapse
That's great. Like I said be very careful in taking it apart. Especially the flex cable that controls the volume rocker. Take your time and you can get it fixed.
Check out this website: http://pocketnow.com/hardware-1/official-htc-hd2-disassembly-assembly-training-videos-leaked
It has some videos on disassembling and assembling the HD2 just so you see what you have to deal with. Also another good investment would be to see if you can get some double sided tape to stick the back of the LCD to main frame if you can't salvage the stuff that's there already. It can't be too thick though because you'll run into problems of getting it put back together. They have that on ebay also.
yes
option one.... change screen..
option 2...change wife.....
hahaha change your wife my friend
htchd2fix said:
yes
option one.... change screen..
option 2...change wife.....
Click to expand...
Click to collapse
haha change screen is cheaper i guess
Everything works fine (except for the camera focus, which I can live with since everything is in focus always as it is because it shoots at like f/8). What's weird is that it has survived so many other falls onto concrete, and this just happens now.
I really need to replace the glass as soon as possible. It looks pretty unprofessional cracked like this.. I am out of warranty (bought the phone in September 2010 from T-Mobile), and T-Mobile no longer has any G2s .
I've looked through a few people who have mentioned replacing their front glass, and would like to do so myself. Anyone have advice regarding how I could do this?
http://www.youtube.com/watch?v=u-dR8CHEGjY
less than $20 for new digitizer, takes 30min -- leave yourself an hour if your new to this
Sweet thanks! Looking forward to getting this done. Will keep this thread updated.
Ordered it from the website. Hopefully will get it soon.
captainreynolds said:
Ordered it from the website. Hopefully will get it soon.
Click to expand...
Click to collapse
I highly advise AGAINST super glue for securing the digitizer.
silverton said:
I highly advise AGAINST super glue for securing the digitizer.
Click to expand...
Click to collapse
Okay - what would you recommend instead?
the glue that is on your phone now will sufice. when heat it up with hair dryer (be carefull if you use a heat gun) most of it will stay along the frame of your phone. just keep it warm and quickly put new digitizer back. have done it twice now with g2s and countless times with g1s and no dust has ever seeped in.
but with g1s i often replaced the casing as well. here i would use 3m double sided tape that worked very well. if you are also replacing the case or for some reason dont feel the glue is enough use this
Sent from my HTC Vision using xda premium
I recommend 2mm 3M adhesive tape. I have used it for the 3 g2s I own and it holds darn well. Its less then 5 bucks on amazon and you will have quite a bit of it. Dont use glue. I always take off that old black tape.
http://www.amazon.com/Adhesive-Sticker-Digitizer-Supersonic-Incredible/dp/B004WIQW3U
demkantor said:
the glue that is on your phone now will sufice. when heat it up with hair dryer (be carefull if you use a heat gun) most of it will stay along the frame of your phone. just keep it warm and quickly put new digitizer back. have done it twice now with g2s and countless times with g1s and no dust has ever seeped in.
but with g1s i often replaced the casing as well. here i would use 3m double sided tape that worked very well. if you are also replacing the case or for some reason dont feel the glue is enough use this
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Okay - thanks for this!
Darkseid83 said:
I recommend 2mm 3M adhesive tape. I have used it for the 3 g2s I own and it holds darn well. Its less then 5 bucks on amazon and you will have quite a bit of it. Dont use glue. I always take off that old black tape.
Click to expand...
Click to collapse
The tape doesn't make the digitizer bulge away from the surface at all? I feel like it would. I'll give that link a buy though, just in case.
the tape he and i is refuring to is thinner than paper, i have not needed it for a g2 before but only have done 2 digitizers on these so i cant say its never necessary unless you are replacing the case as well, but its cheap to have around and may be needed
Sent from my HTC Vision using xda premium
The tape doesn't make the digitizer bulge away from the surface at all? I feel like it would. I'll give that link a buy though, just in case
Click to expand...
Click to collapse
No if you stack it right I had to stack three pieces of that tape to flush it. It does not move around if you tape in the right spots. Its very thin and almost invisible.
That is weird... I did the SAME thing last week lol! I busted it on the concrete too and everything. It scratched up the bezel pretty bad too. I had insurance so I ended up getting the MT4GS (aka HTC Doubleshot). I love how speedy it is but I REALLY miss the development here and the GREAT community here in the Desire Z/G2 sub forum As far as repairing/replacing the screen (the digitizer specifically), everyone here gave great advice. I used to repair phones for a number of years and we always used a sealant very similar to double sided tape that y'all were mentioning. It basically was foaming glue that acted similar to silicon or something. I agree that about not using super glue. Bad idea. Also be careful with the ribbon wires and watch a few videos prior to disassembly. There were a few tear down threads here I'd keep handy while repairing. Good luck to ya!
Make sure you are VERY careful when removing the lcd its very fragile. I reaced my digitizer easy and was careful and lcd got mrssed up ie no pic. Ordered a new lcd and it had not brightness control always dim waiting for new replacement now. Side note once new screen comes in I will be selling this phone if anyone is interested i have 3 of them only need 2
Sent from my SGH-T959V using XDA
Son of gun. The last three screws I need to remove do NOT fit with the philips head screwdriver that was recommended. Now I get to scramble around with my phone in pieces trying to find a smaller philips head screwdriver. Awesome.
They are philips head, not torque screws. I checked and triple checked.
Anyone have any idea what to do here? I can't find smaller screwdrivers anywhere. Home depot has got nada.
Go out and buy a precision screwdriver set or maybe a eye glasses repair kit. Only the first 3 screws are torx T5. Also there is 7 of them tiny ones not 3. There is 3 on either side and one more under keyboard backstop
Sent from my SGH-T959V using XDA
anoymonos said:
Go out and buy a precision screwdriver set or maybe a eye glasses repair kit. Only the first 3 screws are torx T5. Also there is 7 of them tiny ones not 3. There is 3 on either side and one more under keyboard backstop
Sent from my SGH-T959V using XDA
Click to expand...
Click to collapse
No it's the three screws across the back at this time (http://www.youtube.com/watch?feature=player_detailpage&v=u-dR8CHEGjY#t=251s).
They are smaller than all the others and I still cannot get them out. I cannot find an eye glasses repair kit or precision screwdriver set small enough.
http://www.repairsuniverse.com sent me the screwdrivers for the Inspire 4G. Pretty sure the digitizer is for the G2 but I'll have to check the screen sizes to make sure.
Update. Fry's elecronics had a repair kit for smartphones that fit the screws. Still working on it.
captainreynolds said:
No it's the three screws across the back at this time (http://www.youtube.com/watch?feature=player_detailpage&v=u-dR8CHEGjY#t=251s).
They are smaller than all the others and I still cannot get them out. I cannot find an eye glasses repair kit or precision screwdriver set small enough.
Click to expand...
Click to collapse
if you keep watching the video you will see that when he removes the sticky keyboard backstop there are three more identical size screws mirrored from the ones you are talking about right on edge of phone, and then when you remove that piece after you remove the screws there wiil be one more (this makes number 7 ) screw of the same size tiny. Also i dont think it is metioned in the video but when you go to remove the keyboard backstop (the shiny piece under the sticky strip ) use your safe pry tool to unlock the tabs from the edge and then you must slide the piece towards the center of the phone it does not just pry off there are tiny tabs holding one side down opposite of the screws ( edge of phone ) And as far as the screwdriver for eye glasses repair, is it you cant find one or it just does not work? You should be able to find one at any walgreens or equivalent drug store or pharmacy. You could also try a hobby shop they might have something that will work. I personally use quite a big screwdriver to disassemble you just need to make sure it has a sharp point at the tip of the star ( mine is a phillips number 00 ) Believe me once you get it apart once you will be that was so easy.
Ok folks, there's probably a thread on this somewhere, but I haven't found it yet, and frankly I've got plenty to do as it is, so forgive me for not making a thorough search.
Anyhow, I've managed to crack the screen just above the home and app buttons, which is a pain, but **** happens. I've noticed that on eBay the screen + LCD combo is around A$140 while the front glass alone is only A$27. Now, since the Lcd isn't damaged, that kinda looks awesome, right? Except, I haven't found any instructions on how to replace the front glass alone with out ****ing with the LCD too. Anyone know?
Plenty of vids on YouTube on how to change the combo, which is a bit of a pain in the arse compared to other phones. All I want to change is the glass. Any help would be much appreciated.
WestAussie said:
Ok folks, there's probably a thread on this somewhere, but I haven't found it yet, and frankly I've got plenty to do as it is, so forgive me for not making a thorough search.
Anyhow, I've managed to crack the screen just above the home and app buttons, which is a pain, but **** happens. I've noticed that on eBay the screen + LCD combo is around A$140 while the front glass alone is only A$27. Now, since the Lcd isn't damaged, that kinda looks awesome, right? Except, I haven't found any instructions on how to replace the front glass alone with out ****ing with the LCD too. Anyone know?
Plenty of vids on YouTube on how to change the combo, which is a bit of a pain in the arse compared to other phones. All I want to change is the glass. Any help would be much appreciated.
Click to expand...
Click to collapse
use a hairdryer for loosening the adhesive to separate glass and digitizer , being patient is the key but there is a good chance of messing it up
It was my understanding that the screen assembly was next to impossible to disassemble without damaging the other layers of the screen. It seems hard enough to separate from its housing I can't imagine the difficulty in de-laminating the glass from the digitizer/LCD.
I just replaced my front with the combo part from etradesupply it was pretty expensive but 0 hassle. A couple of screws later and I moved to the old main board to the new front part... No heating no heavy prying.
Good luck with your fix.
P
pietro_spina said:
It was my understanding that the screen assembly was next to impossible to disassemble without damaging the other layers of the screen. It seems hard enough to separate from its housing I can't imagine the difficulty in de-laminating the glass from the digitizer/LCD.
I just replaced my front with the combo part from etradesupply it was pretty expensive but 0 hassle. A couple of screws later and I moved to the old main board to the new front part... No heating no heavy prying.
Good luck with your fix.
P
Click to expand...
Click to collapse
Didn't you have to heat the battery to move it when you did the swap? My fear is ill damage one of those wafer thin ribbon cables in the process too. Just looks like a mission of a job from the vid I watched on YouTube. Would hate know how much a tech guy would charge though.
Sent from my Nexus 4 using xda app-developers app
WestAussie said:
Didn't you have to heat the battery to move it when you did the swap? My fear is ill damage one of those wafer thin ribbon cables in the process too. Just looks like a mission of a job from the vid I watched on YouTube. Would hate know how much a tech guy would charge though.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Mine had a battery.
This is the part I bought.
OEM LG Nexus 4 E960 LCD Screen and Digitizer Assembly with Front Housing and Battery
from this page (they ship out of Hong Kong)
http://www.etradesupply.com/lg/android-models/lg-nexus-4-e960-parts.html but it appears to be out of stock now. (Maybe I got the last one)
Like I said, it was pricey, but i couldn't risk me screwing it up further since I run my architecture firm with this phone. I was looking for a minimal down time solution because the alternative for me was just buy a new phone in a retail store the next day. Not having access to the lower parts of my screen was seriously limiting. I slogged away for a week using all sorts of work-arounds to activate the dial pad, use parts of the keyboard etc while I waited for the replacement part.
This guy http://www.youtube.com/watch?v=AZDAIgwbXk4 does not show the heating stage but he is so freaking calm, it can't be that bad... Do remove the main board before prying on the battery if you go that route...
-p
I just want to add, for anyone finding this thread, that the part I got from etradesupply.com has some pretty obvious yellowing of the screen. This screen was either removed from someone else's n4 because of this defect or taken from the reject bin at the factory.
In the future if I have any breaks, I will sent it to an LG facility.
Does anyone know of another place to buy the front screen with housing? It is OOS at etradesupply....
Just saw this one posted. I have not used them.
http://www.globaldirectparts.com/LG-Nexus-4-s/20969.htm
pietro_spina said:
Just saw this one posted. I have not used them.
http://www.globaldirectparts.com/LG-Nexus-4-s/20969.htm
Click to expand...
Click to collapse
Thanks... looks like mixed reviews about this company, though.