Got the Droid X to activate it on Alltel like I did very successfully with my Eris.
Installed HW virtual serial port software, created the virtual serial port, phone was detected and showing up correctly in QPST, went directly to CDMA Workshop and ripped the NV file from the phone, edited all the NV information to alltel's 3G provisioning with a HEX translator, uploaded the NV file to the phone and uploaded the Alltel PRL... all seemed well. Restarted the phone, it now shows no service. When I go to Settings, it tells me the baseband version is "unknown" and it doesnt know the ESN or anything, that isn't good. I tried reconnecting to CDMA workshop, if I try to restore original NV file, it doesn't know the SPC anymore so it doesn't allow it, SPC 000000 isn't recognized now. How can I recover the radio ? I tried restoring it (hard reset) through the settings, security menu AND the Power+home buttons way. After restoring, still no service and SPC is still incorrect, how do I get the radio back to default values ? CAn I reflash the phone? Anyone know where the factory rom is so I can do this ? Ah man, help me please :O
Other than that, I guess I'll have to have motorola take a look at it since I don't have it signed up to a verizon account, my bet is that verizon won't help me. thanks
Did a system "full reboot" help any??
No it hard resets normally and reboots to the welcome wizard, functions perfectly, but still "No Service" and "unknown" baseband in the settings...
I'm thinking I'll have to have the stock Rom file to flash my phone, hopefully this will flash the factory baseband too or maybe tomorrows update will fix my broken baseband, looks like from the information, it updates the baseband, wonder if it will update a totally dysfunctional baseband?
Yikes,.. this blows.
I don't understand why you didn't back up the rom if you were attempting something like this.
There is a Droid X update coming pretty soon, so I'm sure by that time the new rom will be available.
Well, I backed up the NV items, I figured that would be sufficient, guess not, Trial and error I suppose, but you're right.
What software do I use to back up the rom of the Droid X ? I know there is a key sequence on the Droid, what about the droid X ? The recovery screen (Power + Home) brings me to a menu allowing system recovery/wipe install update.zip from memory card, and thats it.
I have a buddy right here in town down the block that got the droid x with me, can I back the rom up off of his and flash that rom to my phone?
Help is SO appreciated...
EDIT
The system dumps that are floating around the web, is that a ROM backup ? http://www.droidxforums.com/forum/droid-x-hacks/114-new-droid-x-retail-dump-straight-out-pot.html
Can I put that file in the SD card as update.zip and flash it?
stevey500 said:
Got the Droid X to activate it on Alltel like I did very successfully with my Eris.
Installed HW virtual serial port software, created the virtual serial port, phone was detected and showing up correctly in QPST, went directly to CDMA Workshop and ripped the NV file from the phone, edited all the NV information to alltel's 3G provisioning with a HEX translator, uploaded the NV file to the phone and uploaded the Alltel PRL... all seemed well. Restarted the phone, it now shows no service. When I go to Settings, it tells me the baseband version is "unknown" and it doesnt know the ESN or anything, that isn't good. I tried reconnecting to CDMA workshop, if I try to restore original NV file, it doesn't know the SPC anymore so it doesn't allow it, SPC 000000 isn't recognized now. How can I recover the radio ? I tried restoring it (hard reset) through the settings, security menu AND the Power+home buttons way. After restoring, still no service and SPC is still incorrect, how do I get the radio back to default values ? CAn I reflash the phone? Anyone know where the factory rom is so I can do this ? Ah man, help me please :O
Other than that, I guess I'll have to have motorola take a look at it since I don't have it signed up to a verizon account, my bet is that verizon won't help me. thanks
Click to expand...
Click to collapse
why not use QXDM to modify the ESN?
Worth a shot...
You can try using the motorola troubleshooter. Its what they use to update your phone anyways and since the new update came out you might be able to install over what you did...I cant post a link because Im new but follow the instructions below and it will walk you through the update process via computer. I figure with a phone thats not working its worth a shot.
Go to Motorola's website and click the droid advert right on the left side of the screen.
Under the "Support" tab in the upper right hand corner is another tab called "Owner Support" click on that.
On the left hand side there are more tabs so this time click on "Update My Software"
It will give you a list of options, choose "Via Computer"
From here it will check your computer for their software and prompt you to download it. Its the troubleshooting software and it will ask you a few questions, its also what they use to update your software via computer so it may be capable of flashing your phone for you. Best of luck and let us know what the end result is.
I haven't tried either of these... but I'm about to start flashing a droid X to cricket and bookmarked these posts in case I mess something up. Proceed with caution as I have no first hand experience with these.
I'm still trying to get a handle on if the service programming parameters (the spc, MDN, MIN, SID, etc.) are updated as part of baseband updates, it sounds like they are since they are saying the device needs to be re-activated after applying either of these updates.
If a baseband update refreshes the service programming parameters here are the two ways I've found of updating the baseband:
Here's a link to a post for updating the baseband portion of your device (without updating the ROM):
http://alldroid.org/Default.aspx?tabid=62&g=posts&t=246
I don't know if this will work on a device that doesn't have a valid baseband prior to the update. Regardless, if your phone is bricked this may be a valid option to try.
There is also a 2.1 SPL file floating around which is the entire system image, the baseband and the rom. You will need to use rsdlite to apply this image to your phone. DO NOT APPLY THIS IF YOU ARE RUNNING FROYO.
Related
I currently have a sprint HTC Vogue and I am trying to flash the Verizon PRL onto it so I can use it on the PagePlus network. Everything I have seen says to dial #775#, but when I do that, my phone just tries to dial the number. I was using NSFAN's rom, and I even tried other roms and it does the same thing. Any help with this will be greatly appreciated.
opivy224 said:
I currently have a sprint HTC Vogue and I am trying to flash the Verizon PRL onto it so I can use it on the PagePlus network. Everything I have seen says to dial #775#, but when I do that, my phone just tries to dial the number. I was using NSFAN's rom, and I even tried other roms and it does the same thing. Any help with this will be greatly appreciated.
Click to expand...
Click to collapse
Which rom are you using now? If you are flashing a custom rom, more than likely you have a folder called "Phone Codes" somewhere in the Start menu. In there, you will have one that is called PRL. You have to have the MSL code to change this value though.
Get the PRL that you need and dump it somewhere in your phone. When you open the PRL program in phone codes (and you enter the MSL code), simply tap and hold where it says the PRL version and click on "Edit" (or whatever option you get), look for yours, and presto! Save, exit (you will be asked to soft reset).
Hope this helps.
Thanks. I have the MSL. I am flashing the official Sprint WM6.1 rom right now out of desperation, but I can put whatever on there. Do I need a custom rom in order to use the "phone codes" folder?
opivy224 said:
Thanks. I have the MSL. I am flashing the official Sprint WM6.1 rom right now out of desperation, but I can put whatever on there. Do I need a custom rom in order to use the "phone codes" folder?
Click to expand...
Click to collapse
To get it in folder format, yes. But if you are going for a stock rom, then simply use the codes and you'll be in good shape.
I want to change PRL in my HTC.
I can access to ##775#.
But I can't find anywhere to PRL file in my phone.
I want to change PRL by myself.
Sometimes, I can use my phone.
But most of times, it shown searching and if i got signal, it shown antenna only. So how should I do? Please help me.
thihaminhtun said:
I want to change PRL in my HTC.
I can access to ##775#.
But I can't find anywhere to PRL file in my phone.
I want to change PRL by myself.
Sometimes, I can use my phone.
But most of times, it shown searching and if i got signal, it shown antenna only. So how should I do? Please help me.
Click to expand...
Click to collapse
Have you tried to use the *228 (or whatever Sprint's equivalent is)? It should automatically provision your device.
opivy224 said:
I currently have a sprint HTC Vogue and I am trying to flash the Verizon PRL onto it so I can use it on the PagePlus network. Everything I have seen says to dial #775#, but when I do that, my phone just tries to dial the number. I was using NSFAN's rom, and I even tried other roms and it does the same thing. Any help with this will be greatly appreciated.
Click to expand...
Click to collapse
When I flashed my Sprint Vogue for Verizon usage... I first had to flash the newest stock Verizon ROM (You can find it on NuAngel's goodies page at the bottom! Yes the radio change one!), then flash a Verizon PRL to the phone. Nu told me I would have to reunlock the phone afterward, but I didn't need to.
I was then able to dial *228 and program the phone! After the phone was programed, I could finally flash ROMs onto it and still have working service. This phone didn't like NuVogue 5 (even though most of NuVogue's development was done on this phone.. wtf). Nu cooked a Verizon specific NuVogue 5 and it worked a bit better, but I remained on stock until I was able to cook my own build (still working on, I have plans on posting it after conferring with Nu and stealingz some of his ideas).
I can update the phone roaming via *228 only with the stock Verizon ROM (does not work on ANY cooked ROMS I have tried!!), but because the phone still has a Sprint PRI (feel free to message me instructions on switching to a Verizon PRI, cause I haven't found them yet), I get the roaming triangle. I used the latest moded PRL found in this thread here (51831) and I've been great ever since.
I try to avoid Carrier generic ROMs (or cooking my in development "XevRev" [tentative name] as generic) since they reflash the PRL, which is just a pain in the butt imo. I plan on trying NuVogue 6 when Nu and I go to hang at his place sometime this coming week, I want to see if its improved over the previous release on this phone. Can't explain why the release ran so waked out in v5 on this phone..... anyway...).
*links removed because I haven't been validated by the mods. I recommend site admin get a Stop-forum-spam (Google to find since I can't link) plugin for his vB forum. XD It's a lot easier then manually chasing down spam.. trust me.*
Well, I was trying a few roms a few days ago and later i decided to go back to stock, I accidentally let the customizations run, and it went back to verizon, but i flashed the 0068 (or something like that) PRL file to the phone using EPST, after that I dialed *228 and updated the PRL to 02004 (latest MetroPCS PRL file), but i still cant use it, (i realized just 5 mins ago, 2 days after prl flashing -_-) I called the customer support just now and they said they just reset the device and I should shut it down and restart it, so anyways my question is:
I can't use my phone, I cant call, text or use web, and no one can call me, it says service not activated when i try to connect to the internet, and I cant use my voice mail either(LA 01 message something error) What should I Do?
Thanks guys.
taha1112 said:
Well, I was trying a few roms a few days ago and later i decided to go back to stock, I accidentally let the customizations run, and it went back to verizon, but i flashed the 0068 (or something like that) PRL file to the phone using EPST, after that I dialed *228 and updated the PRL to 02004 (latest MetroPCS PRL file), but i still cant use it, (i realized just 5 mins ago, 2 days after prl flashing -_-) I called the customer support just now and they said they just reset the device and I should shut it down and restart it, so anyways my question is:
I can't use my phone, I cant call, text or use web, and no one can call me, it says service not activated when i try to connect to the internet, and I cant use my voice mail either(LA 01 message something error) What should I Do?
Thanks guys.
Click to expand...
Click to collapse
The only thing that comes to mind would be for the VZW customizations to actually modify more than just PRL (but mess with other EPST settings as well). Just to confirm, did you have your phone working on Metro before this?
yes, it was working perfectly, even the mms and web were working :|
EDIT: I can call *611 and *228, oh wait i think i said that in the first post...
taha1112 said:
yes, it was working perfectly, even the mms and web were working :|
EDIT: I can call *611 and *228, oh wait i think i said that in the first post...
Click to expand...
Click to collapse
If you had 2.31 installed, the device should still be unlocked. Try running a hard reset/flashing another rom and see if that helps. I have a feeling that you will need to go into EPST and play with your MSID and MIN values and a few other things as well.
egzthunder1 said:
If you had 2.31 installed, the device should still be unlocked. Try running a hard reset/flashing another rom and see if that helps. I have a feeling that you will need to go into EPST and play with your MSID and MIN values and a few other things as well.
Click to expand...
Click to collapse
I hard reset on stock rom and didn't let the customizations run, then flashed 3.42.30 (alltell rom i think) and with out resetting the device I just put the nfsfan's rom in the sd card and flashed that, it still didn't help, can someone give me the settings for the PST.
Thanks for the reply
taha1112 said:
I hard reset on stock rom and didn't let the customizations run, then flashed 3.42.30 (alltell rom i think) and with out resetting the device I just put the nfsfan's rom in the sd card and flashed that, it still didn't help, can someone give me the settings for the PST.
Thanks for the reply
Click to expand...
Click to collapse
3.42.30 is a radio and not an actual rom. My guess would be that, unless you have them stored somewhere else, you will need to call Metro and ask them to help you re-program the phone. Couple of pointers:
a. Don't tell them that you have a Vogue (let alone a Vogue running 6.5) since they have little/no experience with WM devices.
b. Using BAFMSL, get your MSL from your device (you will need this to unlock and edit the EPST parameters. My guess is that you read the ESN to the Metro rep, who calculated an MSL, which of course did not work (here I am assuming that the ESN on your device has been cloned from another phone)).
c. What you want to get out of the rep are the numeric parameters for:
MIN (normally your phone number)
MSID
HomeSID
Don't assume that he/she will be able to guide you through the editing process because they simply won't know how. A simple "yes, go on" every time they tell you to change something will suffice. Just make sure you write the numbers down in a piece of paper.
Do this and get your numbers. If they are any different from the ones that are currently loaded, then your issue will be solved.
Just thought of one other thing. You said you went back to stock Verizon. Which radio did you have before that? And what radio did the Verizon rom take it to?
well, I had it metroflashed, and i can't do it again as i don't have any money now (only 15 years old xD), it has original ESN, does this change anything?
and btw, i can edit the epst, (the code is six 0s) or i may be wrong )
taha1112 said:
well, I had it metroflashed, and i can't do it again as i don't have any money now (only 15 years old xD), it has original ESN, does this change anything?
and btw, i can edit the epst, (the code is six 0s) or i may be wrong )
Click to expand...
Click to collapse
Nah, Metroflash via Houdinisoft does two things:
1. It will add the ESN into Metro's database and will link it to your account.
2. It may provision your phone. I say may because I have seen, more often than not, that Houdini fails to provision any device that runs WM.
Asking you again about the radios. What radio did you have prior to flashing to Verizon stock and what did the stock flash the radio to?
egzthunder1 said:
Nah, Metroflash via Houdinisoft does two things:
1. It will add the ESN into Metro's database and will link it to your account.
2. It may provision your phone. I say may because I have seen, more often than not, that Houdini fails to provision any device that runs WM.
Asking you again about the radios. What radio did you have prior to flashing to Verizon stock and what did the stock flash the radio to?
Click to expand...
Click to collapse
well I had 3.42.50 (bell i think), with super froyo 2.2, when I installed verizon stock rom it changed back to 3.37.(something), does this answer your question?
Thanks for helping me btw.
taha1112 said:
well I had 3.42.50 (bell i think), with super froyo 2.2, when I installed verizon stock rom it changed back to 3.37.(something), does this answer your question?
Thanks for helping me btw.
Click to expand...
Click to collapse
Yes, I was asking because I was afraid that you went below 3.xx.xx on the radio as this has been known to cause issues, including leaving phones completely useless.
Did you get the parameters from Metro as I suggested earlier?
well I got rid of the phone, as the representatives were not helping me at all (I talked to 5) so I am just going to buy a LG rumor touch (virgin mobile) and my other choice is Tmobile G1 but can I get it without a data plan?
taha1112 said:
well I got rid of the phone, as the representatives were not helping me at all (I talked to 5) so I am just going to buy a LG rumor touch (virgin mobile) and my other choice is Tmobile G1 but can I get it without a data plan?
Click to expand...
Click to collapse
Only if you buy it without contract (the G1, that is). Sorry that you couldn't get it to work. I am sure that it was only a matter of re-programming the device.
................
I may be wrong but i am assuming when you flashed and got this problem you must have also unkowingly flashed your radio with another.
after flashing stock, make shure the stock install contains not just rom but radio as well.
Try a carrier cab,
or try a cab with your carrier phone codes (example: ##778# for Sprint)
Then you can then "view" or edit the radio settings, if you know what your doing.
You can see what if anything has changed.
These settings are not supposed to be affected thru any flash,
except mayby if you flashed a different carrier files.
You can also try to search for an "update profile & prl" cab for your device.
Last resort is bring into Verizon, with stock flash and prob re-lock your device.
Might even get a nice replacement.
....................
no it should be for your particular device unless stated works for your device.
a stock flash should have included it. you should do that, then bring in store for service .
There should also be a exe in windows called epst i think to get your profile going you have to reset after presseng.
i forget i havebt done that in a year or so..
..........................................
Long time lurker, first time poster. Please be detailed in your explanation, I still consider myself a noob.
What happened:
I got a google play error that would not let me do anything, so I reimaged a stock ROM to my S4 with Odin. Everything worked fine at this point. I realized I didn't back up my text messages, and looked for a SMS recovery software. The software ran and didn't find anything. Later, I rebooted my phone.
My Problem:
After the reboot my phone came up but had a red X over my signal bars. I tried to Self activate, that did nothing. my phone says: "Preparing network..." in the status bar, but it's not doing anything. In my phone status menu it says unknown for all of the following: Network, Mobile network type, My phone number, MIN, MEID, IMEI, ICCID, Software version, Baseband version.
From what I've found it looks like it's a EFS corruption issue, but I wasn't able to find a fix with working links (and it was an older thread). Does anyone know of a method to fix this? I took it to the sprint store and the guy said he's never seen anything like this before.
Additional info:
Phone model: SPH-L720
android version: 4.4.2
Build: NAE
Kernel version: 3.4.0-481102
security software version MDF v1.0 release 2
Try to make hard reset ##786# it will ask you to reboot.
Reboot and see if the problem solved.
anees02 said:
Try to make hard reset ##786# it will ask you to reboot.
Reboot and see if the problem solved.
Click to expand...
Click to collapse
It is asking for a MSL. Where do I find that?
Try to enter 000000 if it doesn't Accept search in forum or in Google how to get MSL from your device.
anees02 said:
Try to enter 000000 if it doesn't Accept search in forum or in Google how to get MSL from your device.
Click to expand...
Click to collapse
000000 didn't work, I'm trying to get the MSL with some other ways I've looked up.
anees02 said:
Try to enter 000000 if it doesn't Accept search in forum or in Google how to get MSL from your device.
Click to expand...
Click to collapse
OK, I got the MSL (848163) but it doesn't do anything. Any other ideas?
daman9292 said:
OK, I got the MSL (848163) but it doesn't do anything. Any other ideas?
Click to expand...
Click to collapse
After reboot?
Nothing happened?
So try the latest solution
Odin the tar NG2 file.
If it didn't work then convert the phone to media player.
anees02 said:
After reboot?
Nothing happened?
So try the latest solution
Odin the tar NG2 file.
If it didn't work then convert the phone to media player.
Click to expand...
Click to collapse
I've flashed several official and unofficial ROMs to see if I'd have any luck with them. So far nothing changes this. It looks like the files are corrupted, but there must be a way to change/fix this. It's just software, so there has to be someone who knows how to fix or modify this file, group of files, whatever it is? even if it's with a hex editor.
So the end result was I sent the phone into the Samsung service center. They took care of everything with no charge since it was still under warranty (barely). Everything working fine now. And the process was quick and painless, they even paid for shipping both ways.
Glad that it worked out. I just wanted to say i have had success with dfs cdma tool for ESN repair in the past on my sprint S4.
It's confusing when you first launch the program, however you don't have to buy the full version to use. If you want to look into that, try a search for esn repair on Google.
sprint galaxy s4-Unknown MEID, IMEI, ICCID, service state
I have no idea what happened with my phone, one minute was working fine next it was like everything got earsed from the phone. Like above my phone is saying Unknown MEID, IMEI, ICCID, service state just everything in the about phone or satus says unknown. I have tried getting in to the ##3424# diag screen and it asks for msl, i put it in , well it wont even click ok, or nothin, i have tried using odin, even hard reset, and some reason i can't this info back, and one know what happened?
daman9292 said:
It is asking for a MSL. Where do I find that?
Click to expand...
Click to collapse
Phone Information
Phone Number: Last owner shows up, want this cleared
Android Version: 7.0
Build Number: NRD90M
Software Version: LS997ZV6
Security software: MDF V2.0 release 4
OEM Unlock (On)
USB Debugging (On)
PROBLEM: A sprint V20 was brought to me to have the carrier swapped from [Sprint] to [Cricket]. So far sounds easy right? Read below...
Please Review the following of my step by step :
ESN IS LISTED AS CLEAR ON SWAPPA, please note that means this device "should" not have issues (first thing I checked)
Under APN settings there is no way to +add APN as there is with every other phone I have touched. Is this because it was a lease?
I considered perhaps rooting the phone, throwing on a custom ROM, and therefore hopefully having that added. Looks like bootloader is locked.
Of course, I am 1 security patch too late, DIRTYSANTA will NOT work on my firmware.
Searched everywhere, seems as though you CAN NOT roll this back.
Next I looked at using Chimera Tool to roll back the firmware. I cannot seem to find a ZV5 firmware file.
Next I looked at using chimera for IMEI repair. I figured if I change the IMEI just long enough to modify the APN settings then revert it back, I would be golden. Chimera gave me an error of not having access to the ports. I tried to dial in the following codes to enable port check but none have access to the "hidden menu". 277634#*#, 3845#*997#, *#546368#*997#. I tried to factory reset the phone, no luck.
I was able to use ##DIAG# (##3424#) and enable DIAGNOSTIC mode, yet this seemed to do nothing about ports.
I was able to enter ##DEBUG (##33284#) but there is no ability to ediit in here. Although at one point in time I was at a screen asking for an SVC code, no idea how to get back there though.
Tried to do a "fix" on Chimera, which is the same as refurbish on LG Up (I need the phone in factory condition), but apparently this device does not support refurbish mode. So flashing software is not wiping anything.
I cant seem to boot it into recovery, for god knows why.
QUESTIONS I HAVE
How do I completely wipe the phone of all user data?
How do I open these ports since the codes provided bring up no menu?
Since sprint is the only one recognizing the bad ESN, is this device able to even swap carriers?
What reason would APN not have an ability to edit or modify?
What additional tactics can I use to get my goal accomplished?
Hopefully we can brainstorm together
Please refer to this thread, it should work and do what you need to withthat apk. I belive its under IOT menu then under lte and put it in lab mode and turn on all the bands plus adding APN .. Im not to sure but ask the OP im sure he is way more helpful... asfar as adding the apn without this you need root to be able to do this and for nonroot i believe you must use ADb commands to tgecdevice and add them from there. there is threads oithere....
https://forum.xda-developers.com/v20/help/lg-v20-cdma-to-lte-gsm-switch-via-t3602409
if the esn is now listed as unpaid, or lost /stolen cricket will not be able to add the esn to their system either. its a nation wide list that blacklist's the device.
Unfortunately changing the apns etc wont fix this.
ZV6 currently does not have a way to be rolled back, so there is 0 root/custom options.
APNS have been blocked by sprint for some time now and using some root methods they can be unlocked, in your case you wont be able to access them due to being unable to root.
Tools like CDMA WORKSHOP, QPST, QXDMA, etc may be able to write the apns and such you would need, if you could get the msl for the device, but if it is no longer active, and the device has a "bad esn" then you wont be getting that from the carrier. I dont believe youll be able to access the nv items etc without it and probably not going to be easy to locate the msl.
##diag# is how youll talk to the device on cdma workshop etc, youll need to go to your installed devices and change its com port to a port thats free and remember the port as the tools need you to select that port, but again they wont work for you without the msl anyways.
so in a nutshell, it looks like your best option is to sell the phone as parts only, or if recently purchased on swappa and it was listed good esn and its not then file a report at-least to make swappa aware.
Team DevDigitel said:
if the esn is now listed as unpaid, or lost /stolen cricket will not be able to add the esn to their system either. its a nation wide list that blacklist's the device.
Unfortunately changing the apns etc wont fix this.
ZV6 currently does not have a way to be rolled back, so there is 0 root/custom options.
APNS have been blocked by sprint for some time now and using some root methods they can be unlocked, in your case you wont be able to access them due to being unable to root.
Tools like CDMA WORKSHOP, QPST, QXDMA, etc may be able to write the apns and such you would need, if you could get the msl for the device, but if it is no longer active, and the device has a "bad esn" then you wont be getting that from the carrier. I dont believe youll be able to access the nv items etc without it and probably not going to be easy to locate the msl.
##diag# is how youll talk to the device on cdma workshop etc, youll need to go to your installed devices and change its com port to a port thats free and remember the port as the tools need you to select that port, but again they wont work for you without the msl anyways.
so in a nutshell, it looks like your best option is to sell the phone as parts only, or if recently purchased on swappa and it was listed good esn and its not then file a report at-least to make swappa aware.
Click to expand...
Click to collapse
Is the SPC the same as the MSL
williamschromebook said:
Is the SPC the same as the MSL
Click to expand...
Click to collapse
Yes
What if I have the SPC?
Sent from my HTC 0PJA2 using XDA Labs