Guys i need your help and advise regarding my XDA2.
I dont know kasi what happened with my unit, i bought my Xda July of last year, so it's nearly one year na, every once in a while nag i-install ako ng softwares, which i buy online, thru pocketgear etc. And if i dont like the results or i got tired of these softwares, I perform hard resets. Do you think that's bad? I mean yun frequent hard reset?
The other day kasi while i was charging my phone napansin ko hindi umiilaw yun Led indicator na green? normally di ba if youre charging nakailaw yun?
anyways, unplug ko sha and when i tried to switch the power button walang nangyari, hindi sha nag power and yun display nya is yun O2 logo lang, as in yun logo lang after you do soft resets, eh hindi naman ako nag soft reset, so mejo nagulat ako. Then i tried na mag soft reset pero ganun pa den. I decided to perform hard reset instead, after that wala pa den, hindi nagbabago yun screen, andun pa den yun O2 logo. I tried removing the battery then binalik ko after i think 40 minutes, pina-drain ko yun backup nya, after that binalik ko, nag power sha and then nag install na ulit yun default nya, pero after using the unit for 15 mins more or less, bigla na naman sha nag hang, nag soft reset ako pero ganun na naman.
I repeated the whole procedure and ganun na naman ang nangyari.
After using the unit for 15 minutes nag ha-hang na sha.
What do you think is the problem? Battery kaya? or something else?
Im planning to buy a new battery sana pero i thought i should seek advice first, sayang naman kasi if hindi naman pala yun ang problem.
The unit still has warranty pero it'll take months from globe here sa Pinas bago mapalitan.. I would appreciate any help from you guys..
Thanks in advance
Vinz
sir, i suggest you take your unit to brightpoint in cubao to have it serviced under warranty. could be a hardware problem with your device.
What OS are you using? try reflashing first.. it might help. If not.. bring it to bright point. Just make sure to reflash it with the old rom before bringing it there.
good luck
Thanks so much.. I guess i will just bring it to Globe just to be sure hehe..
Thanks again..
VinZ
. .
Thanks to your interesting approach ...
My phone is stuck on bootloader ..
In such circumstances, how can I use your method ..
Meanwhile, my phone belonging to a region that HTC ROM for it has not issued ...
I am waiting for your help ...
. .
it's a very good move to check the SN from HTC.
at least try to make a Hard Reset to see if your phone can bootup!
while the phone is off keep Volume UP and DOWN together and push the Power button to goto Hard Reset screen.
I've email the company HTC
Their answer was:
Your phone from Australia and so far no rom for it yet ...
What should I do now .. that my phone is useless now ..
What method can now pour on Ram ...
Gold Card With this action it is possible ...
I am waiting for friends to help ..
Thanks ...
. .
Thank you
Iam nead HxD hex editor PLEASE
Thanks friends
. .
follow you guide but nothing happed. Screen stuck in HTC logo appear 0%. This is Not solution without HSPL
this is link
Click to expand...
Click to collapse
Thank you very MUCH
Hi, I have a HD mini with s/n sh06tpz01049
I thinks its Australia ,I cant find that code for my phone please help me
help me I have mini hd from austrulia I want cid for it
. .
hey,can you fix your phone?did you found cid ?
. .
Arkadaslar htc hd mini varsa elinizde ve istediginiz bir rom yüklemeye calıştıgınızda In Viled Vendor veya buna benzer hatalar alıyorsanaız (sda_unlock) programını ndirin bir kez calıştırın ve sizden teleonunuzu reboot etmenizi isteyecek bu işlemden sonra istediginiz rom'u yükleye bilirsiniz. Aynı işlemi app yüklerken gecersiz sertifika hatası aldıgınız app yüklemek içinde yapa bilirsiniz. Kolay gelsin )
SSPL
is it possible to use this method on my phone, which have been flashed by using SSPL?
BTW, i am stuck on how to run the ROMUpdateUtility.exe after corect the nbh.
i have the corrected nbh, and what is the next step to flash my phone? creat a folder and put it and ROMUpdateUtility.exe inside and then OMUpdateUtility.exe?
plz give me a hand., i am not so familiar to programming.
I want Australia Original (Ship) ROM.
can somebody help me, pls?
If u can, pls write to me on my profile!!!
thanks a lot
Open Help. I updated smartwach u8. touch screen does not work. by the original software.
Thank you so much I am writing from Turkey
you probably bought a clone and the u8 firmware does not work on that watch
as for now, there is NO solution for you problem
JarlSX said:
you probably bought a clone and the u8 firmware does not work on that watch
as for now, there is NO solution for you problem
Click to expand...
Click to collapse
firmware loading. but the touch screen does not work ..
ozcanayazlarli said:
firmware loading. but the touch screen does not work ..
Click to expand...
Click to collapse
Is it possible to install the firmware clone ??
Cihazınızın resimlerini koyarmısınız
Selam
Saatinizin resimlerini eklerseniz yardımcı olmaya çalışırım,bendede var bir adet firmware sonrası çalışan ama beyaz ekran açan bir cihaz.
tunc34 can you send me the firmware please
Hi everyone!
I've a trouble, my Galaxy Grand 2 is very strange phone...
I had a lot of problems with root it, but finally Kingo root made it, after that I tried to flash it to CWM or TWRP, but anything couldn't do it.
Worst fact was, that something was wrong with kernel, becouse system had a lot of bugs, it was slow and screen couldn't recognise touch sometimes...
Then I tried some flashers from play store.. anddd.... Nothing didn't happened after this.. but when I turned off device, it stopped reacting to anything.. ANYTHING! XD
It's HARD BRICKED and I don't know what to do..
Ahh.. and when I connected it to computer with MS Win 7, it recognised it as "QHSUSB_BULK", so i installed some drivers and I have now "Qualcomm HS-USB QDLoader 9008 (COM6)"... So I can connect with this, but what kind of programs works with it...
Please for help everyone... :/
First of all go here: https://samsung-firmware.org/model/SM-G7105/ and search ur language and download it, next what u do is download odin 3.07v, then u need flash in on odin, here link for yt how do this : https://www.youtube.com/watch?v=HVLyjeqPtn0 . If i help press "thanks " if u have questions ask! edit: ah , i forgot to ask , u can go download mode?
AiWaNczewski said:
First of all go here: https://samsung-firmware.org/model/SM-G7105/ and search ur language and download it, next what u do is download odin 3.07v, then u need flash in on odin, here link for yt how do this : https://www.youtube.com/watch?v=HVLyjeqPtn0 . If i help press "thanks " if u have questions ask! edit: ah , i forgot to ask , u can go download mode?
Click to expand...
Click to collapse
HARD BRICKED...
There is no recovery or download mode, the phone is absolutely dead...
In the phone I have installed stock, rooted android 4.3 G7105_XXUANF4, but I actually downloaded to computer a newer the software G7105_XXUANAA from this site:
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
I read, that there is a way to unbrick creating an SDC files from firmware using Advance Turbo flasher and uploading them to sd card, but ATF needs 5 MD5 files...
So I found it and I tried to do it, but now I have problems with using ATF... ehhh....
Little update!
When the phone is connected to computer, windows recognises it as "Qualcomm HS-USB QDLoader 9008 (COM6)".
I noticed, that when I hold Vol-, Home and Power buttons for a few seconds, the computer losts contact with this device, then connects again and this cycle repeats about 4-5 times, after that computer losts contact for good and reconnects after removing and inserting battery into a phone...
Boot is dead, but I saw tutorials, where someone uses only a Win32diskImager, unbrick.img file and SDCARD to call download mode...
I created also JIG but it's also not working...
Mr.Spirit said:
When the phone is connected to computer, windows recognises it as "Qualcomm HS-USB QDLoader 9008 (COM6)".
I noticed, that when I hold Vol-, Home and Power buttons for a few seconds, the computer losts contact with this device, then connects again and this cycle repeats about 4-5 times, after that computer losts contact for good and reconnects after removing and inserting battery into a phone...
Boot is dead, but I saw tutorials, where someone uses only a Win32diskImager, unbrick.img file and SDCARD to call download mode...
I created also JIG but it's also not working...
Click to expand...
Click to collapse
Hmm shieeet, idk how i can help u, u had "LTE" version, i only saw unbrick file for 7102... :/ i will try search
AiWaNczewski said:
Hmm shieeet, idk how i can help u, u had "LTE" version, i only saw unbrick file for 7102... :/ i will try search
Click to expand...
Click to collapse
Właśnie widziałem wersję dla G7102, ale dla LTE chyba nie ma...
Może da się stworzyć w jakiś sposób plik do debrick'owania? W jakiś sposób musi się dać...
Może założę nowy thread typu:
Anyone know how to create debrick image for android devices??
Dzięki za pomoc
Thanks for every help!
Mr.Spirit said:
Właśnie widziałem wersję dla G7102, ale dla LTE chyba nie ma...
Może da się stworzyć w jakiś sposób plik do debrick'owania? W jakiś sposób musi się dać...
Może założę nowy thread typu:
Anyone know how to create debrick image for android devices??
Dzięki za pomoc
Thanks for every help!
Click to expand...
Click to collapse
( piszę po angielsku bo chyba bana można wyłapać, ale tak swoją drogą ktoś na 7105 szukał unbricku i jakiś dev nad tym pracował szukam właśnie tego wątku)
AiWaNczewski said:
( piszę po angielsku bo chyba bana można wyłapać, ale tak swoją drogą ktoś na 7105 szukał unbricku i jakiś dev nad tym pracował szukam właśnie tego wątku)
Click to expand...
Click to collapse
Ok, that's good news
Mr.Spirit said:
Ok, that's good news
Click to expand...
Click to collapse
Ah, and u can create thread on "Cyanmod . pl " (polish forum) , many ppl on this forum had g7105 and can help. On XDA 7105 is not very support cause LTE version only for Europe , still i will search for help u but its gonna be hard to find :/
AiWaNczewski said:
Ah, and u can create thread on "Cyanmod . pl " (polish forum) , many ppl on this forum had g7105 and can help. On XDA 7105 is not very support cause LTE version only for Europe , still i will search for help u but its gonna be hard to find :/
Click to expand...
Click to collapse
Ok, thank you.. then I'm gonna post there and if something will help I will write a new thread about this
Mr.Spirit said:
Ok, thank you.. then I'm gonna post there and if something will help I will write a new thread about this
Click to expand...
Click to collapse
Okay , i add u to friends on XDA accept if u can and message if something change with phone
OK! Then finally I found service, which operates with JTAG and even this could't help... A servicer said, that some special memory, which Samsung melts into a motherboard is damaged. It can't be changed and only way to repair the phone is changing the motherboard.
Anyway! Thanks for help, most thanks for AiWaNczewski
For any questions... you can ask me..
No problem bro :\ thanks for wrote
Sent from my SM-G7105 using XDA-Developers mobile app
I want to hardbrick my friend phone how to you do it
---------- Post added at 02:37 PM ---------- Previous post was at 02:33 PM ----------
And i know how to unbrick it
AiWaNczewski said:
Hmm shieeet, idk how i can help u, u had "LTE" version, i only saw unbrick file for 7102... :/ i will try search
Click to expand...
Click to collapse
i had an grand 2 lte version thx to adyita my phone is hard bricked can u help me fix?
Btw im on a budget so service center is not an option
honghongleong said:
i had an grand 2 lte version thx to adyita my phone is hard bricked can u help me fix?
Btw im on a budget so service center is not an option
Click to expand...
Click to collapse
Flash stock rom by odin in download mode
Sent from my SM-G7105 using XDA-Developers mobile app
AiWaNczewski said:
Flash stock rom by odin in download mode
Click to expand...
Click to collapse
My pc was unable to detect the phone
honghongleong said:
My pc was unable to detect the phone
Thx to adytiarom
Click to expand...
Click to collapse
adityarom works
Hi it's the first time that I write a thread, so if I have posted it in the wrong section I'm sorry
so, I have a problem with my Leeco x622, I was trying to flash the recovery but something went wrong,
since that moment the phone is in hard brick, I have searched online a tool to fix the problem and I have read about a software called "SP flash tool"
to use this program I need to have the original firmware that I have found on a chinese forum
That's where I found the first problem: the program return me this error: "BROM ERROR: STATUS_SEC_AUTH_FILE_NEEDED"
So I think that I need the .auth file for the leeco x622 that I haven't already found.
The second "problem" is that the phone disconnects and reconnects continuously but I think that is normal because the pc has the drivers and once Sp flash starts it remains connected
so there is anyone that have a device like mine that can help me?
The Leeco is the model with Mediatek x20 mt 6797 with 3 gb ram and 32 gb rom
Thanks to anyone who will help me
tommasobertoldi said:
Hi it's the first time that I write a thread, so if I have posted it in the wrong section I'm sorry
so, I have a problem with my Leeco x622, I was trying to flash the recovery but something went wrong,
since that moment the phone is in hard brick, I have searched online a tool to fix the problem and I have read about a software called "SP flash tool"
to use this program I need to have the original firmware that I have found on a chinese forum
That's where I found the first problem: the program return me this error: "BROM ERROR: STATUS_SEC_AUTH_FILE_NEEDED"
So I think that I need the .auth file for the leeco x622 that I haven't already found.
The second "problem" is that the phone disconnects and reconnects continuously but I think that is normal because the pc has the drivers and once Sp flash starts it remains connected
so there is anyone that have a device like mine that can help me?
The Leeco is the model with Mediatek x20 mt 6797 with 3 gb ram and 32 gb rom
Thanks to anyone who will help me
Click to expand...
Click to collapse
I'm in the same boat :/ any advances?
Same problem. we haven't stock rom for sp flash toll. Fastboot rom and update rom not work.
Arkadaşlar bir konuda yardıma ihtiyacınız var. LE TV S3 x622 Model Telefona imei yazmak ve rom yüklemek için twrp işlemleri yaparken brick oldu. Şuan Pcye bağlayınca bir mediatek usb port, bir preloader usb vcom olarak sürekli bağlanıp kopuyor. Netice itibariyle telefon brick oldu ve spflashtoll romunu bulamıyorum yardımcı olabilir misiniz?