Database Users

xda help?

hi dno if any1 could help me but stell iv got 2 xda exce one with an borken usb and the over what says NO GSM wil it boots up jus the quseions off can the exce with the broken stell synk over bluetooth like instell software like u do with the usb and the one what says no gsm i droped and brok it so got replace parts and everthink works but that no gsm and phone things could any1 help ? thanks adam

AdamJones014 said:
hi dno if any1 could help me but stell iv got 2 xda exce one with an borken usb and the over what says NO GSM wil it boots up jus the quseions off can the exce with the broken stell synk over bluetooth like instell software like u do with the usb and the one what says no gsm i droped and brok it so got replace parts and everthink works but that no gsm and phone things could any1 help ? thanks adam
Click to expand...
Click to collapse
If I understand your english read here to do a hard reset:
http://wiki.xda-developers.com/index.php?pagename=Universal_Resets
And dont forget to vote!

hi m8 thanks for ur replay im very thankful yes i talk english lmfao even thow it dont look right n that sorry about that
yes iv tryed that last time n just tryed it agine, i try to update the radio c if that help but it cum up with an erro on the computer but updateing the ROM works
i read a fourm on here about the truble iv got but its a diftent phone n i think its kinda broke as i droped must did it damage but i dont know as im not a wizerd on this phones just do what i can read about them
manny thanks agine hope u could help me agine
PS on ebay theres USB fixers but on the bored it stel looks dammage (this is on about the usb foulty phone) what ones on the bored charges the phone if u know
massge gose to any1 that cant help

AdamJones014 said:
hi m8 thanks for ur replay im very thankful yes i talk english lmfao even thow it dont look right n that sorry about that
yes iv tryed that last time n just tryed it agine, i try to update the radio c if that help but it cum up with an erro on the computer but updateing the ROM works
i read a fourm on here about the truble iv got but its a diftent phone n i think its kinda broke as i droped must did it damage but i dont know as im not a wizerd on this phones just do what i can read about them
manny thanks agine hope u could help me agine
PS on ebay theres USB fixers but on the bored it stel looks dammage (this is on about the usb foulty phone) what ones on the bored charges the phone if u know
massge gose to any1 that cant help
Click to expand...
Click to collapse
Lol!
Very difucult to understand you, try to use a translator
Well if you do not have an Universal you should try in the proper subsection of your new device.
Good luck,

If you haven't flashed the radio properly, then GSM won't work. Try flashing with a different radio (it takes longer than flashing ROM, so be patient). Try 1.18 or 1.15.
Yes you can install and sync using BT. However, I don't think there's any successful way of flashing ROM with a broken USB port.

Instaling rom without sspl mini

. .

Thanks to your interesting approach ...
My phone is stuck on bootloader ..
In such circumstances, how can I use your method ..
Meanwhile, my phone belonging to a region that HTC ROM for it has not issued ...
I am waiting for your help ...

. .

it's a very good move to check the SN from HTC.
at least try to make a Hard Reset to see if your phone can bootup!
while the phone is off keep Volume UP and DOWN together and push the Power button to goto Hard Reset screen.

I've email the company HTC
Their answer was:
Your phone from Australia and so far no rom for it yet ...
What should I do now .. that my phone is useless now ..
What method can now pour on Ram ...
Gold Card With this action it is possible ...
I am waiting for friends to help ..
Thanks ...

. .

Thank you
Iam nead HxD hex editor PLEASE
Thanks friends

. .

follow you guide but nothing happed. Screen stuck in HTC logo appear 0%. This is Not solution without HSPL

this is link
Click to expand...
Click to collapse
Thank you very MUCH

Hi, I have a HD mini with s/n sh06tpz01049
I thinks its Australia ,I cant find that code for my phone please help me

help me I have mini hd from austrulia I want cid for it

. .

hey,can you fix your phone?did you found cid ?

. .

Arkadaslar htc hd mini varsa elinizde ve istediginiz bir rom yüklemeye calıştıgınızda In Viled Vendor veya buna benzer hatalar alıyorsanaız (sda_unlock) programını ndirin bir kez calıştırın ve sizden teleonunuzu reboot etmenizi isteyecek bu işlemden sonra istediginiz rom'u yükleye bilirsiniz. Aynı işlemi app yüklerken gecersiz sertifika hatası aldıgınız app yüklemek içinde yapa bilirsiniz. Kolay gelsin )

SSPL
is it possible to use this method on my phone, which have been flashed by using SSPL?
BTW, i am stuck on how to run the ROMUpdateUtility.exe after corect the nbh.
i have the corrected nbh, and what is the next step to flash my phone? creat a folder and put it and ROMUpdateUtility.exe inside and then OMUpdateUtility.exe?
plz give me a hand., i am not so familiar to programming.

I want Australia Original (Ship) ROM.
can somebody help me, pls?
If u can, pls write to me on my profile!!!
thanks a lot

Hard Brick Gionee e7 32GB

Hey Guys i need your help please save me
1. When i am connecting my phone RED notification light glow and then the light goes off.
2.My Device is detected as Qualcomm HS-USB QDLoader 9008
3.When I am trying to Flash it shows that error as shown in Screenshot.
Please help me
Thank You..

Guys Please Help
Help Help Help :crying::crying::crying:

Tried this. m.youtube.com/watch?v=EL12Cq9X3oo

Help
tomek101279 said:
Tried this. m.youtube.com/watch?v=EL12Cq9X3oo
Click to expand...
Click to collapse
Sorry Brother but i am Indian so i cant understand Spanish.
can you please me

Sorry I from Poland.... My friend tray this tutorial and him gionee working good now

help
tomek101279 said:
Sorry I from Poland.... My friend tray this tutorial and him gionee working good now
Click to expand...
Click to collapse
can you please convert it to english?

No I don't only little Eng

tomek101279 said:
No I don't only little Eng
Click to expand...
Click to collapse
can you tell me whether your friend uses the ROM which is provided in the link or the he uses the NORMAL ROM

shivam2702 said:
Hey Guys i need your help please save me
1. When i am connecting my phone RED notification light glow and then the light goes off.
2.My Device is detected as Qualcomm HS-USB QDLoader 9008
3.When I am trying to Flash it shows that error as shown in Screenshot.
Please help me
Thank You..
Click to expand...
Click to collapse
had same problem few days ago, i thought my gionee is dead for forever
1.download "GNQC DownLoad Tool V1.6.9.0"
2, install Qualcom_Driver_V1.1.0.0 and AndroidDriverInstall
3. after few hours when your phone is completly discharged connect to computer via cable
4. if phone is detected like a Qualcomm HS-USB QDLoader 9008 then just load new rom from that spanish video by GNQC DownLoad Tool V1.6.9.0 and wait until you see green subb in program.
5 disconect phone and turn on
if you still had problem let me know
@tomek101279 zapytaj kolegi czy ma wersje 32gb czy 16 jeżeli 32 to ile mu na tym romie z youtuba zajmuje system z góry dzięki

Daxol said:
had same problem few days ago, i thought my gionee is dead for forever
1.download "GNQC DownLoad Tool V1.6.9.0"
2, install Qualcom_Driver_V1.1.0.0 and AndroidDriverInstall
3. after few hours when your phone is completly discharged connect to computer via cable
4. if phone is detected like a Qualcomm HS-USB QDLoader 9008 then just load new rom from that spanish video by GNQC DownLoad Tool V1.6.9.0 and wait until you see green subb in program.
5 disconect phone and turn on
if you still had problem let me know
@tomek101279 zapytaj kolegi czy ma wersje 32gb czy 16 jeżeli 32 to ile mu na tym romie z youtuba zajmuje system z góry dzięki
Click to expand...
Click to collapse
Thanks brother for your reply
Can you please tell me how to get known that my device is fully discharged?

Daxol said:
had same problem few days ago, i thought my gionee is dead for forever
1.download "GNQC DownLoad Tool V1.6.9.0"
2, install Qualcom_Driver_V1.1.0.0 and AndroidDriverInstall
3. after few hours when your phone is completly discharged connect to computer via cable
4. if phone is detected like a Qualcomm HS-USB QDLoader 9008 then just load new rom from that spanish video by GNQC DownLoad Tool V1.6.9.0 and wait until you see green subb in program.
5 disconect phone and turn on
if you still had problem let me know
@tomek101279 zapytaj kolegi czy ma wersje 32gb czy 16 jeżeli 32 to ile mu na tym romie z youtuba zajmuje system z góry dzięki
Click to expand...
Click to collapse
Ma wersję 32 GB pisał że system zajmuje więcej miejsca co nieco dziwnie~ha ha to ty tak miałeś telchina forum

shivam2702 said:
Thanks brother for your reply
Can you please tell me how to get known that my device is fully discharged?
Click to expand...
Click to collapse
@shivam2702 just wait and when you plug in via cable red diode should blink
@tomek101279 zapytaj jak możesz czy coś koło 22gb bo nie wiem czy źle coś wgrałem czy taki rom

Daxol said:
@shivam2702 just wait and when you plug in via cable red diode should blink
@tomek101279 zapytaj jak możesz czy coś koło 22gb bo nie wiem czy źle coś wgrałem czy taki rom
Click to expand...
Click to collapse
can you do this for me on TEAM VIEWER? Please

Hello, I got the same error message.
I redid handling with windows xp 32 bit with flash software.
Everything went well, the green message indicated as successful.
So I tried to on but it does not illuminate what?
I then tried to re handling xp 32 bit maintentant but the laptop is detected for 1 to 2 seconds and then nothing!
Thank you for your help.
---------- Post added at 12:08 PM ---------- Previous post was at 12:06 PM ----------
Look, at my video ; https://www.youtube.com/watch?v=9Yek5Ct_Ow4
Thanks for your helps

ftck4 said:
Hello, I got the same error message.
I redid handling with windows xp 32 bit with flash software.
Everything went well, the green message indicated as successful.
So I tried to on but it does not illuminate what?
I then tried to re handling xp 32 bit maintentant but the laptop is detected for 1 to 2 seconds and then nothing!
Thank you for your help.
---------- Post added at 12:08 PM ---------- Previous post was at 12:06 PM ----------
Thanks for your helps
Click to expand...
Click to collapse
your movie is private i can't see it but i know you from youtube i tried help you but your phone isn't gionee maybe you installed wrong rom?

Help
Daxol said:
@shivam2702 just wait and when you plug in via cable red diode should blink
@tomek101279 zapytaj jak możesz czy coś koło 22gb bo nie wiem czy źle coś wgrałem czy taki rom
Click to expand...
Click to collapse
Hey @Daxol Is the LED should Blink or it should glow and then off.
Thanks

HELP!!!!!!!!!!!!!!!!!!!!!!!!
shivam2702 said:
Hey Guys i need your help please save me
1. When i am connecting my phone RED notification light glow and then the light goes off.
2.My Device is detected as Qualcomm HS-USB QDLoader 9008
3.When I am trying to Flash it shows that error as shown in Screenshot.
Please help me
Thank You..
Click to expand...
Click to collapse
:crying::crying::crying::crying::crying::crying:
BRO, IF YOU DID UNBRICK YOUR E7. THEN PLEASE HELP. POST A TUTORIAL OF YOURS ON YOUTUBE.

saurav.e7 said:
:crying::crying::crying::crying::crying::crying:
BRO, IF YOU DID UNBRICK YOUR E7. THEN PLEASE HELP. POST A TUTORIAL OF YOURS ON YOUTUBE.
Click to expand...
Click to collapse
Hhehehheheh Ohk Bro

HELP
Daxol said:
had same problem few days ago, i thought my gionee is dead for forever
1.download "GNQC DownLoad Tool V1.6.9.0"
2, install Qualcom_Driver_V1.1.0.0 and AndroidDriverInstall
3. after few hours when your phone is completly discharged connect to computer via cable
4. if phone is detected like a Qualcomm HS-USB QDLoader 9008 then just load new rom from that spanish video by GNQC DownLoad Tool V1.6.9.0 and wait until you see green subb in program.
5 disconect phone and turn on
if you still had problem let me know
@tomek101279 zapytaj kolegi czy ma wersje 32gb czy 16 jeżeli 32 to ile mu na tym romie z youtuba zajmuje system z góry dzięki
Click to expand...
Click to collapse
BRO PLEASE GIVE ME THE WEB ADDRESS TO DOWNLOAD THE GNQC DOWNLOAD TOOL V1.6.9.0 . I M NOT ABLE TO FIND... PLEASE HELP.. :crying::crying::crying::crying::crying::crying::crying::crying:
---------- Post added at 07:21 AM ---------- Previous post was at 06:43 AM ----------
shivam2702 said:
Hhehehheheh Ohk Bro
Click to expand...
Click to collapse
bro please give step by step directions and also the web address from where i can get the related files...please bro reply as soon as possible... thanks:crying::crying::crying::crying::crying::crying:

Stilll Not Working
Please Help Me

Bricked my phone. Someone can help?

Hi guys. I tried to flash the rom from gionee elife 5.1 on my kazam but after the start process spflash gave me an error and now my phone is dead. Now my pc see them just like alcatel single rndis interface not like before 65xx preloader. Can someone help me? Thanks in advance

Costy88031 said:
Hi guys. I tried to flash the rom from gionee elife 5.1 on my kazam but after the start process spflash gave me an error and now my phone is dead. Now my pc see them just like alcatel single rndis interface not like before 65xx preloader. Can someone help me? Thanks in advance
Click to expand...
Click to collapse
why you tried flash the 4.3 ROM from Gionee elife S5.1??? any other rom is better than that version...
and buddy... i don't know anything about that to help you... maybe you hardbricked your phone =#
--- Updating
on chinaphonearena . com and Here on XDA you can find who to solve this problem... obviously it happens to other branded phones not our specific phone but they have almost same SoC so the problem can be solved almost same way they did... try search more about that problem... what i read until now is about replace the "alcatel single rndis interface" with 65XX preload driver... ;D

Thanks a lot DvDwx. My phone is alive now. Your post help me very much. I going from link to link starded from your link and founded a solution. Here is the link http://forum.xda-developers.com/micromax-a116/help/preloader-mt65xx-visible-device-manager-t2837412

DvDwx. said:
why you tried flash the 4.3 ROM from Gionee elife S5.1??? any other rom is better than that version...
and buddy... i don't know anything about that to help you... maybe you hardbricked your phone =#
--- Updating
on chinaphonearena . com and Here on XDA you can find who to solve this problem... obviously it happens to other branded phones not our specific phone but they have almost same SoC so the problem can be solved almost same way they did... try search more about that problem... what i read until now is about replace the "alcatel single rndis interface" with 65XX preload driver... ;D
Click to expand...
Click to collapse
Great job man!
Sent from my VIVO AIR using Tapatalk

Leeco le s3 x622 Hard Brick

Hi it's the first time that I write a thread, so if I have posted it in the wrong section I'm sorry
so, I have a problem with my Leeco x622, I was trying to flash the recovery but something went wrong,
since that moment the phone is in hard brick, I have searched online a tool to fix the problem and I have read about a software called "SP flash tool"
to use this program I need to have the original firmware that I have found on a chinese forum
That's where I found the first problem: the program return me this error: "BROM ERROR: STATUS_SEC_AUTH_FILE_NEEDED"
So I think that I need the .auth file for the leeco x622 that I haven't already found.
The second "problem" is that the phone disconnects and reconnects continuously but I think that is normal because the pc has the drivers and once Sp flash starts it remains connected
so there is anyone that have a device like mine that can help me?
The Leeco is the model with Mediatek x20 mt 6797 with 3 gb ram and 32 gb rom
Thanks to anyone who will help me

tommasobertoldi said:
Hi it's the first time that I write a thread, so if I have posted it in the wrong section I'm sorry
so, I have a problem with my Leeco x622, I was trying to flash the recovery but something went wrong,
since that moment the phone is in hard brick, I have searched online a tool to fix the problem and I have read about a software called "SP flash tool"
to use this program I need to have the original firmware that I have found on a chinese forum
That's where I found the first problem: the program return me this error: "BROM ERROR: STATUS_SEC_AUTH_FILE_NEEDED"
So I think that I need the .auth file for the leeco x622 that I haven't already found.
The second "problem" is that the phone disconnects and reconnects continuously but I think that is normal because the pc has the drivers and once Sp flash starts it remains connected
so there is anyone that have a device like mine that can help me?
The Leeco is the model with Mediatek x20 mt 6797 with 3 gb ram and 32 gb rom
Thanks to anyone who will help me
Click to expand...
Click to collapse
I'm in the same boat :/ any advances?

Same problem. we haven't stock rom for sp flash toll. Fastboot rom and update rom not work.
Arkadaşlar bir konuda yardıma ihtiyacınız var. LE TV S3 x622 Model Telefona imei yazmak ve rom yüklemek için twrp işlemleri yaparken brick oldu. Şuan Pcye bağlayınca bir mediatek usb port, bir preloader usb vcom olarak sürekli bağlanıp kopuyor. Netice itibariyle telefon brick oldu ve spflashtoll romunu bulamıyorum yardımcı olabilir misiniz?