This happens when i hold down the call key to enter voice search.
Any fixes for this problem please?
thanks
(attached picture)
bump
someone must know?
have you tried installing the latest version and removing the one you have?
I managed to sort the problem, I was holding it down for too long, the long hold want asssigned to a program
Related
I have been searching all the forums for an answer with no luck so I am just going to ask...
I want to be able to activate MS Voice Command from the answer button on my wired headset (JAM). I guess that means that the answer button has to be remapped? Is there a program that can do this or do I have to fiddle with the registry? Sorry if the question has already been asked, I couldn't find it.
Any advice is greatly appreciated.
Matt
hehe, I would like to do that exact thing too....let me know if you find something out.!
The Mobidila.net 2.02 has the ability to assign the answer button to Mobidial...maybe U can look what it change in the registry files...and so U can find out how to change it... :roll:
regards,
Primoz
Thanks for the advice, I will have a look at mobidial. I was hoping to find a program that allows remapping of the answer button just like so many other programs remap buttons 1-5. Idealy a short button press for answer and a long button press for MS Voice Command. My Sony P800 worked that way, which was a nice system. I have been looking around on other forums and I'm surprised that most people are only interested in bluetooth headsets. Personally I prefer a nice sounding set of wired headphones for listening to my ogg files.
Matt
Matterhorn, have you found a way to map the headset button? I've alse been looking for ages for this.
Me too! Please post if you found a solution!
Cheers
I think Vito buttonmapper might work.
I can't test it as I'm still waiting for my MDA compct.
Vision 8)
Hi All,
I just tried Vito Buttonmapper. Unfortunatly the remapping is limited to the standard 4 buttons you can choose in \settings\buttons.
This doesn't solve the voicecommand-headsetcontrol problem.
I hope someone can tell me otherwise, or come up with a solution, 'cause the voice command control with my headset is the only thing I'm missing.
Thanx for all the information in the forum!
cheers,
karolinger
HI All,
I just installed MS Voice Command 1.5 on my new Jam and I can't even get the AGC Microphone to stay on "enable" after I select it. Further, in Power Buttons options, I can't find the Voice Command option to assign to a button. What I did was copied the voicecmd file to the Windows\Start Menu so it would appear as one of the options in "Power Buttons"
I can't figure out why it won't keep the settings. After selecting it, I go back only to see the button is back to the default assignment. Please help. I got MS voice Command to work as long as I click on the shortcut I created. I need to be able to map it to a button. Thanks.
Hi Gybanez,
I can't help you with to the point advice, I'd just tell what I did and it worked for my. Hope it'll work for you aswell.
I installed Voice Command 1.5 from my computer. After a soft reset, I could choose Voice Command in Settings/personal/buttons.
I asigned it to the record button, 'cause untill now, I haven't used it. Works really well,
it just doesn't work wirh my headset...
The ACG microphone stays on disable! (Well, the microsoft manuel told me so...)
cheers,
Karolinger
thanks karolinger. I did it again and finall it works. The ACG Mic is disabled but it does work so I won't complain. I still have Blue Angel and I did install MS Voice Command 1.5 and didn't have any issues with it. Also, ACG setting stays on "enable" Thanks for the advice.
Hi gybanez,
Glad I could help you!
Maybe I stupid question... what does the ACG Mic? What chances when it's enabled?
cheers,
karolinger
AE Button plus can remap answer button ！
I tried it ,yes ! it's work !
But that work only in Phone active mode (When U make a phone call that answer button just be remapped)
Have any idea ?
http://ae.inc.ru/aebplus_t.html
jojo0821 said:
AE Button plus can remap answer button ！
I tried it ,yes ! it's work !
But that work only in Phone active mode (When U make a phone call that answer button just be remapped)
Have any idea ?
http://ae.inc.ru/aebplus_t.html
Click to expand...
Click to collapse
Thanks for the heads up
I'm going to find that app right now!
every time i pull get my phone out of the pouch the IE button gets pressed and IE opens, is there any way to make the IE button push and hold to open IE? any suggestions are welcome. i searched but i couldn't find anything so anyone with any ideas write back please.thanks in advanced. i searched but i couldn't find anything so anyone with any ideas write back please.
Yes
sgabriel001 said:
every time i pull get my phone out of the pouch the IE button gets pressed and IE opens, is there any way to make the IE button push and hold to open IE? any suggestions are welcome. i searched but i couldn't find anything so anyone with any ideas write back please.thanks in advanced. i searched but i couldn't find anything so anyone with any ideas write back please.
Click to expand...
Click to collapse
Yes. Lock your phone or turn it off by pressed the power button once. Or you can search on here and google for one of the button mapper programs. Simply pressing the power button should work.
thanks for the quick reply, I do that sometimes but problem is that when i get a call or a txt i end up pressing the IE button thats why i was looking for a fix or something so I can make IE button press and hold to open. thanks.
AEButton Plus will let you program it for Single, Double, Triple, and/or Long Press.
You could also simply disable the button using the stock Menu->Settings->Buttons utility.
-pvs
Newbie here, getting used to my first touch screen phone and WM6.1/Touchflo on my HD.
First of all - this forum is GREAT! I have spent a week glued to it and has given me loads of helpful info during my transition from Nokia S60 to Touch HD.
However, there are 2 things I'd like to know:
1. Is it possible to remove the recent calls/contacts list from above the keypad on the phone dialer either through a registry change or using a different wvga dialer skin? It's too easy to accidentally press one of these and call someone I don't want to call. I am more than happy to press menu->call history to see the call history.
2. When you click on a name in the contacts list it goes straight to dial them (if there is only one number or you click in recent calls). Is there some kind of "confirm call" question add-on? i.e. if you click on a contact, instead of calling them straight away it asks you if you are sure! (This would actually be a solution to 1. above I guess).
I've been searching for hours for something like this so if it is already covered I do apologise for not finding it from searching (perhaps I am using the wrong terminology).
Thanks in advance.
Newton.
p.s. keep up the good work here!
First of all - welcome to the forum!
In terms of your questions....
Yes, this is an issue that has been discussed and as far as I know, no one has found a good solution for it. It is annoying that it automatically calls the contact you tap.
For your question Nr. 1: I don't know if that can be done.
For question Nr. 2: Here is a suggestion that I posted in another thread.
Keep in mind that the "recent calls list" above the number pad is the issue here.
On the other hand, if you simply open your contacts' list, then tapping on a name will not automatically call, but rather it opens the contact. Then, tapping on a number will call, and tapping on the name/picture at the top will open contact for editing.
1) I used AE Button Plus to solve this problem. Remapped the Green Button: One press -> Return , tripple press -> Green Button. Since then I had no calls by accident any more
P.S.: Changed from Nokia S60 (N73) to the Blackstone too ! Cheers!!!
Koffein Schluck said:
1) I used AE Button Plus to solve this problem. Remapped the Green Button: One press -> Return , tripple press -> Green Button. Since then I had no calls by accident any more
Click to expand...
Click to collapse
Thanks for the reply and suggestion. Not sure what this actually means (we don't have a green button on Touch HD!!) but I'm going to download AE Button Plus and I'm sure I'll figure it out anyway.
Did you use the freeware version 1.0.1 or the paid for version 2.6.5 of AE Button Plus ?
EDIT: Just downloaded 2.6.5 and mapped green button triple press to green button and single press to nothing (I assume that's what you meant by "return") and yes, it prevents a single press of the hardware call button but does not seem to help accidentally tapping a contact in the recent calls list above the phone dialer keypad and dialing straight away. Perhaps you misunderstood what I was trying to do or I missunderstood your solution!!
Thanks
Newton
Hi there all,
There might be some answer to my question somewhere lying under some other issue/title. But I can't think of close possibility, so m posting a new thread here.
It's about Remapping the 4th semi-hard Search button (w/ a magnifying glass icon) or any other button to default (or any other function).
I have WildPuzzle Rom 8.0.8 which working all fine except with some messed up Google App. One of those app is Google Search (com.google.android.googlequicksearchbox.apk) which initially was link to the Button I mentioned above. So whenever I used that little button (either on home screen or web browser), it crashes and FC. I try reinstalling Google Search app but failed/restricted to override.
I found out, GoogleQuickSearchBox.apk in /data/app/ folder is causing the problem, so I get rid of it with the help of Root Browser. After that Google Search app from market installed with no problem. No more FC.
That's the git of my current situation. Now here is the real problem. The magnifying glass Search Button lost default link to Google Search App. How do I remap it? I have installed Open Search & Voice Search, which I can bring up by Long Pressing that Search Button. But Single Press Search is gone.
I'm guessing I only need to either fix the link or place the right file in right folder. I can do simple coding (when necessary) if you can guide me a bit.
Thanks for anyone who can help me in advance.
Anyone can help?
Just remapping magnifying button to do default Google search thing.
Thanks.
Anyone know how to change or disable the voice dialing preset on the MT4G? I've already remapped the genius button, but it still launches when I press the voice dial button on my Finiti headset. Ideally, I'd love to just remove the whole damn genius feature, but I'll settle for changing the voice dialer to Google.
Please post questions in Q&A section.
I'd like to do this too. Anyone have a clue how to make something else, like the default Google voice app or even Vlingo the bluetooth dialer?
Giving this a little bump, as I'm interested to find out how it can be done as well, particularly given the fact that a new, enhanced version Google Voice Actions/Search was released earlier today. Anyone have any success in making this work?
Did you try uninstalling and reinstalling Google Voice Search? The first time I hit the call button on my BT headset, it came up with using either the Genius Button or GV Search. Maybe that can force the option to come back?
Just wondering if anyone has figured out how to do this. I am also trying to get the bluetooth headset to launch another voice dialer instead of Genius.