Stuck on White Screen - EVO 4G General

I flashed using Simple root method then installed the SU-2.1-e-unsecure-signed rom and wanted to go back to stock because it was not working right.
I used the RUU and would give me a USB error. I followed another post that said dont unplug the phone just run the RUU again and it will work. I did this then got another error. I tried to reset and it would stall on the white screen. I went into hboot and tried to flash the damage control rom and now its stuck in boot loop.
I have cleared the cache and tried to reinstall the rom but to no avail. Any help would be appreciated.

Related

stuck at splash screen, have tried all the solutions.

Hello, I am having some issues and I've tried all of the fixes on several different forums including this one.
I wanted to root my phone so I followed Amon's guide and successfully went from the Tmobile released 1.6 to the rooted 1.5 in the guide. I then wanted to update to the rooted 1.6 but was having issues with trying to install the update. While in the safe mood I asked it to extract update.zip about 3 times before it finally opened it and it extracted everything really quickly!
I then tried to reboot the phone but it stayed at the green MyTouch 3G splash screen without going anywhere. I've tried all the tricks of taking out my battery, unplugging the USB, any form of combination I could.
I'm told my phone isn't bricked, only stuck but my computer isn't picking up the phone either. It doesn't say it can't read the USB device and fastboot still says waiting for devices.
Can some one please help me with my problem?
Thank you,
Difinitus said:
Hello, I am having some issues and I've tried all of the fixes on several different forums including this one.
I wanted to root my phone so I followed Amon's guide and successfully went from the Tmobile released 1.6 to the rooted 1.5 in the guide. I then wanted to update to the rooted 1.6 but was having issues with trying to install the update. While in the safe mood I asked it to extract update.zip about 3 times before it finally opened it and it extracted everything really quickly!
I then tried to reboot the phone but it stayed at the green MyTouch 3G splash screen without going anywhere. I've tried all the tricks of taking out my battery, unplugging the USB, any form of combination I could.
I'm told my phone isn't bricked, only stuck but my computer isn't picking up the phone either. It doesn't say it can't read the USB device and fastboot still says waiting for devices.
Can some one please help me with my problem?
Thank you,
Click to expand...
Click to collapse
What do you mean by safe mode? Which donut ROM are you trying to flash? Which recovery image do you have? How long was it stuck on the splash screen. You need to give more details for us to be able to help out. What radio and spl do you have?
I meant safe mode by where you select the option to extract update.zip.
I was trying to flash Amon's 1.6 32A Rom. Even though my phone states 32B I followed his instructions on how to Root the Mytouch and he was using 32A stuff so I figured if it worked OK, I was now running on 32A instead of 32B.
I was using RAv1.2.0H.img from his original guide. I dont know what radio and spl I have. There wasn't really a guide on updating ROMs so I just tried the same basic steps.
I hope this is more helpful, I am doing my best to learn everything, I am still fairly new to modding a phone. (my last phone was a Blackberry 8100).
Difinitus said:
I meant safe mode by where you select the option to extract update.zip.
I was trying to flash Amon's 1.6 32A Rom. Even though my phone states 32B I followed his instructions on how to Root the Mytouch and he was using 32A stuff so I figured if it worked OK, I was now running on 32A instead of 32B.
I was using RAv1.2.0H.img from his original guide. I dont know what radio and spl I have. There wasn't really a guide on updating ROMs so I just tried the same basic steps.
I hope this is more helpful, I am doing my best to learn everything, I am still fairly new to modding a phone. (my last phone was a Blackberry 8100).
Click to expand...
Click to collapse
I'm not sure what you mean by extract update.zip. I think you are talking about fastboot there. Have you tried to flash the rom in the recovery image? you know, by pressing power and home to get to the recovery, then flashing it through there. go into fastboot by pressing power and back and it will tell you what radio and spl you have. once you have that, write that so we can further get a grasp as to your problem. if in fact you still have the 32A configuration, you might want to flash over the 32B radio and and try to flash a 32B rom.
That is my problem, I can't get past the "MyTouch 3G" green screen. I've tried the Home button, Back button, Vol Down button and holding them for several minutes with no result, it stays at the very first screen when it turns on.
I've tried flashbooting from adb but it says "waiting for devices" and my computer isn't picking up any kind of device.
I'm having the exact same problem except im stuck on the vodafone screen. I also tried flashboot form adb but "waiting for devices" is shown and pc wont detect the device.
Did this before.
If you can get into recovery mode, Hold Home button while powering on, you can restore a nandroid backup, if you took one, or put the sappimg.nbh file or the correct items to flash whatever rom.
I had a stock 1.5 Mytouch. I wanted to root and get the 1.6 version of cyanogen, forgot to flash the HTC_ADP_1.6_DRC83_rooted_base as part of the process and had got stuck in the neverending mytouch logo.
If you can get into recovery:
wipe, then put the update.zip files directly on the card.(use a SD adapter, ...)
Choose apply any update from SD
Choose the base files, then the rom if its a newer version
Once those two updates run, reboot the phone.
My never ending logo disappeared, and the phone booted. Newb mistake on my part.
Wait at least a minute or two once this is done.
since the phone is stuck on the original logo and isnt responding to buttons when loading up... do we manually remove and reinsert the battery while holding the home button?
I have tried getting into recovery mode, but it doesn't do anything past the splash screen. Holding the home button while trying to power on the device won't do much.
hey difinitus keep me updated if u somehow get it to work
Even when you take the battery out for a significant time it turns on immediately to the logo screen. Whats the longest you have left the phone sitting at the logo screen.
A small thought, since it was trying to load a rom you had on your memory card, try taking the battery out, and removing the memory card, and then turn it on and wait a bit and see if you get a different result. Its a thought.
If that doesnt work put the memory card back in and turn it on and once its on remove the memory card.
Perhaps the rom on your memory card is corrupt and it is unable to continue to load it, you could even try putting the rom on again using your memory card reader and your computer, thus erasing the existing one.
try plug usb in to phone
take battery out
prees and hold home button
re-insert battery while still holding button
let go after about 3-5 sec
have you tried getting into fastboot by holding back and powering on the phone once you took out the battery? cuz fastboot doesn't initialize after the splash screen, it just pops up as soon as you hit back and power
@Tech no boy; I have tried using several different update.zip and a .nbh and also tried reformatting.
@sitimber; have tried that before, the splash screen still pops up. It just vibrates once and goes to the logo, with any combination of buttons and steps.
@tazz9690; Yes, no matter what I do it still goes to the splash screen. I've been saying that for several posts now.
you might have a bricked phone then. call up t-mobile and get it returned under warranty. if you are 100% positive that you will not be able to get past your splash screen, then the return center will not be able to prove that you have modded your phone, and they will send you another phone.
you might have a bricked phone then. call up t-mobile and get it returned under warranty. if you are 100% positive that you will not be able to get past your splash screen, then the return center will not be able to prove that you have modded your phone, and they will send you another phone.

Stuck at "HTC Incredible" Boot SCreen

Any assistance is appreciated.
I rooted a few days ago and did the forever S-off. I have ROM Manager loaded and was poking around in the system. I downloaded Skyraider and ROM Manager asked me to reboot. Not thinking it wouldn't let me know what it was doing when in recovery before doing something the rom had been applied. Now the Phone has for 40+ minutes been at the "HTC Incredible" boot screen.
I have read not to pull the battery but The power Button and Volume button do nothing so I could really use some suggestions. As a little more info I have not flashed the radio yet so it was a 1.x radio that a 2.2 rom was just seemingly applied to.
Bricked or recoverable? I have a Nandroid backup if someone can help me get back to that point...
pull the battery out this happened to me before... pull it out and go into recovery mode ... first download on your pc 1.0 baseband .. then while in recovery load that into your sd...then install it to your phone... that will take your phone back to when you first got it out of the box... after that load up baseband 2.0 then root then raider
You could also try booting into cwm recovery and do a wipe data/cache
Did you get past the boot screen?
I am also stuck on the boot screen.
With some advising to pull the battery I did so. It did allow me to boot to recovery and I restored the backup I had taken. I am back up and running as if nothing had happened. I will revisit flashing the radio to the right version and trying the rom again soon.

[Q] is my phone bricked?

noob help!
so i was just charging my phone. then all of a sudden my phone froze.
restarted it, then its just stuck at the htc logo. then the jetplane sound from the at&t intro.
tried doing a hard reset or entering recovery but after it reboots, still gets stuck at the htc logo.
(MORE INFO: im not sure if my phone is still rooted because i restored it my at&ts factory rom,cant change settings for usb debugging coz i ant get inside my phone,i still have my nandroid backups in my memory card from before)
is there anyway i could fix this? thanks in advance.
Try booting into recovery and deleting cache, reboot. If it still gets stuck, then try again, this time deleting user settings. If all else fails, restore your nandroid backup or restore the factory rom. If the problem is the rom, try flashing the RUU.
phone gets stuck at the htc screen when i choose recovery mode. also when i clear data.
tried re-flashing the phone with the stock rom from htc's website. it says its successful but still.. stuck at the htc startup screen.
if u flashed the factory rom back on it, then clockwork is gone is probably gone now. It most definitely is not rooted anymore either. Have you tried to reroot the phone?
rcmmartinez said:
phone gets stuck at the htc screen when i choose recovery mode. also when i clear data.
tried re-flashing the phone with the stock rom from htc's website. it says its successful but still.. stuck at the htc startup screen.
Click to expand...
Click to collapse
That was an un-wise decision to put the stock rom back on. Like stated above. Try a Re-Root. Then flash a CUSTOM ROM to your phone. If this doesn't work. Sounds like you are S.O.L.

Ive got problem in a big way

Basically the jist of the story goes like this.. I was on the TBH official full gingerbread rooted OTA and i decided to try out a different rom so i made a backup and flashed it... the new rom i flashed i ended up not like it so i said ok whatever ill just nandroid back to my backup i had made.. so i nandroid back to my backup and im getting crazy force closes everywere and then my bootstrap dosent work anymore
So then i say ok ill just SBF it not a big deal.. So i proceed to flash the official .340 SBF file with RSD and it goes through the entire process... it flashes the entire thing fine and does all the checksum matches ETC and they all pass.. then at the VERY end of the process im talking like 99% done when it says "Switching to BP Pass Thru Mode" it FAILS and stops the entire process... I then proceed to unplug my phone and even if i pull the battery or do anything whatsoever it goes straight to the bootloader screen
I tried flashing it again... it always works and is perfectly fine up until 99% where it says switching to BP pass thru mode and then it fails and is over with... I even tried the gingerbread SBF file and nothing is working and the phones stuck at the bootloader screen with the "Code Corrupt" message
What can i do here? Ive never had problems with RSD and SBFing in the past and its always worked on this machine... Im also a little hesitant to bring it into verizon or something with this problem because its stuck on the bootloader screen which is obviously something im probobly not suppose to even know exists
Also i have no access to stock recovery or anything whatsoever
Joe92T said:
Basically the jist of the story goes like this.. I was on the TBH official full gingerbread rooted OTA and i decided to try out a different rom so i made a backup and flashed it... the new rom i flashed i ended up not like it so i said ok whatever ill just nandroid back to my backup i had made.. so i nandroid back to my backup and im getting crazy force closes everywere and then my bootstrap dosent work anymore
So then i say ok ill just SBF it not a big deal.. So i proceed to flash the official .340 SBF file with RSD and it goes through the entire process... it flashes the entire thing fine and does all the checksum matches ETC and they all pass.. then at the VERY end of the process im talking like 99% done when it says "Switching to BP Pass Thru Mode" it FAILS and stops the entire process... I then proceed to unplug my phone and even if i pull the battery or do anything whatsoever it goes straight to the bootloader screen
I tried flashing it again... it always works and is perfectly fine up until 99% where it says switching to BP pass thru mode and then it fails and is over with... I even tried the gingerbread SBF file and nothing is working and the phones stuck at the bootloader screen with the "Code Corrupt" message
What can i do here? Ive never had problems with RSD and SBFing in the past and its always worked on this machine
Click to expand...
Click to collapse
in the stock recovery do a factory rest...that will fix it
I have no access to stock recovery
Stock Recovery
Home+Power Button
Search to enter the menu and volume up+down to navigate and camera button to select
Ok. Problem, my brother in laws phone is stuck at bootup and stays. Tried to back up, to the back up and still stays stuck. Tried factory reset. And still nothing... Stuck. Any suggestions? Pls help and thank you in advance.
*WALK in the WORD*
SBF
dhaymond said:
Ok. Problem, my brother in laws phone is stuck at bootup and stays. Tried to back up, to the back up and still stays stuck. Tried factory reset. And still nothing... Stuck. Any suggestions? Pls help and thank you in advance.
*WALK in the WORD*
Click to expand...
Click to collapse
Put phone in bootloader mode power+volume down+camera and SBF to 2.3.340

Help my htc magic 32a got black screen after updated

Hi please I need help,this is my story I bought htc magic which is running 2.2.1,so I wanted to updated it to 2.3,so what I did is I rooted it installed Recovery manager from the store then flash clockwork recovery,but the problem is I can't get in to recovery using Home + On buttun,but when ever I want to enter recovery I have to on the phone then goto rom mnager from there I select boot recovery,so I managed backup my rom,then I downloaded ginger yoshi Rom then wipe factory reset,wipe caches then installed Rom,then Reboot,so after reboot my phone hang on booting so I have no option,because I can't enter recovery mode,I can only enter bootloader,So I decided to download Ruu_Sapphire_HTC_Europe_2.17.14.01.2_HTC_PTG_test_signed_Nodriver,then I run it on my system which I'm running window 8 64bit,then put my phone in bootloader then I press back key and my pc recognize the phone,and on the phone it showed fastboot usb,then I agreed and the flashing begin,so during the flashing my phone showed some like 3 files fail to installed all I can remember is system and booting failed to installed,so after that I removed my phone from the system the remove my battery put it back try to on it,but the phone refuse to on try to enter bootloader but it refused just black screen,and now when I plug it in system it showed red light charging and it make sound then showed Usb device not recognized,and when I press on buttun with trackpad it showed blue led light,
Please someone help me fix my phone please,
Before it happen my phone is htc magic 32a, S-OFF and Sapp500,Sorry for my bad English,Thanks
JTAG
JTAG BOX , which is very expensive way to fix , so now its worth or not
i fixed it using jtag box 1 month ago

Categories

Resources