Database Users

Help needed to fix rooting gone wrong

First off im sorry im adding another rooting post to these boards.
So i decided to root my 32B magic today copyed the recovery.img over and update file from the rooting wiki, loaded recovery mode then updated, but now my phone when turned on loads to the vodafone screen and freezes id left it for afew hrs but still no luck.
Here is what i know so far:
I am able to get to fastboot and fastboot usb
I cant however get to recovery mode by pressing menu+power
I can get to the recovery mode using the sdk\tools
my problem is that im sure the fix is relativly simple i.e. load some files onto sd and start again, but the problem is that i have no other way to load the files onto the sd card than through the phone and my knowledge of adb isnt that great although has improved greatly today lol.
Im not sure how correct i am on this, but would it be a possible fix to load say a rom update.zip onto the sd card and load that through recovery mode to bring it up? If that would fix it could i possible get help on the adb code needed to pass the file from computer to the phone through fastboot usb or recovery.
Thank you very much for your help

Ok i think i have figured how to push files to my sd card however whenever i try it come up saying Failed ( remote:signature verify fail)

ok well i managed to move Cyanogen's newest rom over and update to that but its still hanging up at the vodafone screen upon booting, im lost for ideas.
Please any help how ever small would be amazing right now.

please help is desperatly needed.

i am having the same issue.... and it seems NO ONE has a bloody answer to why it is failing

I successfully update to 32A and root. Then i tried to update to MT3G OTA rom and now i'm stuck at Vodafone screen. Need help or ideas and how to recover..

i had the same problem, what i did was that i found a sd card adapter and hooked it up to my computer, its pretty quick and less hassle

waacow said:
I successfully update to 32A and root. Then i tried to update to MT3G OTA rom and now i'm stuck at Vodafone screen. Need help or ideas and how to recover..
Click to expand...
Click to collapse
take out your battery and after a few seconds put it back in, before it powers up go into fastboot(back+power) and that should do it

I still have a pretty red splash screen and stucked.
neoxtian said:
take out your battery and after a few seconds put it back in, before it powers up go into fastboot(back+power) and that should do it
Click to expand...
Click to collapse
I have same problem, but your solution didn't work for me.
I did as follows.
#1. typed following command in terminal.(well, I'm using Mac)
Code:
fastboot-mac flash recovery recovery-RAv1.2.0G.img
#2. pulled battery off from phone.
#3. pluged USB cable to phone and also Mac.
#4. pressed (ENTER) in the terminal, then fastboot-mac said '< waiting for device >'.
#5. put the battery in while pressing (back)+(power)
#6. then, pretty red vodafone splash screen come up.
#7. In the terminal, it still said '< waiting for device >'. Nothing was changed.
#8. On the phone, pretty red splash screen was still there. Nothing was changed.
Those are all I have done many times for last 2 days.
But, it didn't work.
Please let me know if there is something I missed.

I tried and stuck in the exactly same problem as [robotician]. I have MT3G.

robotician said:
#5. put the battery in while pressing (back)+(power)
#6. then, pretty red vodafone splash screen come up.
#7. In the terminal, it still said '< waiting for device >'. Nothing was changed.
Click to expand...
Click to collapse
THe red vodafone should not come up. You have to hold the back key longer perhaps, because it's supposed to go into the fastboot screen with all sorts of text and three androids on skateboards at the bottom.

@Niaski
was your rom made for the 32B or the 32A?
They are very diferent phones and mixing the roms causes the issue you are seeing.

Crap, now I've done it

Long story short I've got a Rogers Dream, 32B, 2005 SPL that up until recently I had only rooted. When I'd press power and home it reported Cyanogen JF 1.2 I believe.
I was trying to update my ROM, long story short I renamed the signed-dream_devphone_userdebug-ota-14721.zip to update.zip, (because I didn't have any option to select which file I wanted to use to update) loaded it, then realized I was unable to access the SDcard in any way (card reader, etc) to replace that file with the latest cyanogen rom.
So now my phone is stuck at the Rogers boot logo, and I can't get into fastboot or the loader screen.
How effed am I? As effed as I suspect? Anyway to recover this thing, or did I just dumbass myself into a $350 paperweight?

unfortunately I think I am running into a problem just like yours.. I'm running AmonRA 1.5.0 recovery. For a few days it was working fine. I basically did a wipe on the phone and restarted the phone hoping to get the command list to come back up but now I don't get anything but a HTC recovery logo on my phone. I've been pressing a combination of all kinds of buttons to see if there is a way to bypass the recovery console but I'm getting nothing but that HTC logo (which should be something like the Android mascot for some of you), yet I am also not getting to see the T-Mobile G1 boot screen (US Phone) anymore, I assume you don't see your carrier on your screen neither..
Anyways, if anyone can give us any advice, your support will be greatly valuable.

Pull the battery, once the device is off replace the battery. Hold down the camera button and press the power button. If you get to a rainbow colored screen, or a white screen with Androids on skateboards you are not bricked. If you are unable to get to one of these screens I am afraid you have a paperweight, or at least until someone figures out the JTAG pins to manually re-write the startup code back to the phone.
If you can get to one of those screens, you are in good hands! If you have a T-Mobile G1 then simply download this and extract the file within (DREAIMG.nbh) to the ROOT directory of a freshly formatted (FAT format) SD card.
Just reboot the phone with the camera button pressed and follow the directions.
This will get you back to Android 1.0, please follow guides from that point forward.

My tmobile mytouch 3g is bricked how can unbrick it??

Hey people greeting first of all by stupidity i flashed a new radio 32a radio on my 32b mytouch by accident now my phone its bricked it just stay stuck on the first splash scree i cant fastboot or recovery mode my pc dosnt reconize my phone ether what can i do??? Help please
mytouch 3g
32b s on g
slp 1.33.2010

if you cant fastboot/recovery/anything, it's pretty much bricked. If you get some blue LED, there isnt much hope for that either.

i got no blue led it just stay on the first splash screen no recovery mode or fastboot

morepr said:
i got no blue led it just stay on the first splash screen no recovery mode or fastboot
Click to expand...
Click to collapse
Then you're bricked. Means you need a new phone.

no ooo
people there is a solution via the usb when it is stuck at the first splash screen just search
mine is totally bricked and still no solution !!!

call tmobile.
I did the same thing yesterday and I told them that My phone updated itself then wouldnt turn back on.
my new one is in the mail and will be here in 2 days
just act naive and clueless.
as long as your still under warranty, your all good.

thanks ppl i try everything but this its not going no where the pc dosnt want to recognize my phone and i try everything just gonna throug it in the toilet and call the insurence

At least sell it for parts, you can probably squeeze 40 bucks out of it or similar. Check the going rates on eBay for non-functional handsets.

I know its a bit late....but I fixed my 'bricked' MT3G
I was searching around the web for a solution to my problem, and needless to say, there wasn't much out there for me besides the typical... "it's bricked, buy a new phone."
So here's my story:
Earlier today I decided to upgrade my MT3G to Cyanogen's 5.0.7 Android 2.1 rom. I had used the experimental 5.0.6 rom, and found it to be a bit more "glitchy" than I was comfortable with. So, I went online for what I figured to be a very simple upgrade...and downloaded both the rom and a kernel (which was 32A not 32B).
Needless to say, after installing the rom, the kernel, my gapps update, and resetting my phone... it did nothing but hang on the MT3G screen. After about 30-45 min...I knew something was wrong and I freaked. It was unresponsive to multiple attempts to reboot, and was not being seen by my computer.
That's when the online search began... I looked for other individuals who've suffered the same fate and kept coming up with the same "you're screwed" response. Having recovered more "bricked" iPhones in the past than I can count, I knew this could not be the case. For me, as long as the phone turned on and flashed some sort of screen, there's still hope.
So what did I do...
Well, I first attempted to boot the phone into recovery mode...but it would not work. Next, i figured I would try doing a fastboot... and what do ya know... it worked!
From there I used multiple combinations of plugging in the phone via usb and resetting and putting into recovery mode until I found one that worked.
So here's my steps:
(Note: this has only been tested if you accidentally installed the 32A kernel on your 32B device)
1. Power on the phone... If you continuously sit at the green MT3G screen, take off the back and take out the battery.
2. Plug in your USB cable (VERY IMPORTANT, will explain later)
3. Next, replace the battery and hold down both the [home] and [power] buttons, if it merely turns on to the green screen, and you get no response from your computer's usb notification window...take out the battery again
4. Fastboot your phone (hold down [back] and [power] arrows) While your phone in connected to your computer, it should make a notification sound.
5. Restart your phone from Fastboot, AS SOON as it shuts off, hold down the [home] and [power] keys.
6. Continue holding until you hear a notification sound from your computer...at that point it should boot into recovery mode.
7. Wipe your handset (just for good measure) and reinstall your update package...DELETE that wrong kernel from your sd card so you dont make the same mistake again.
Summary:
I have no clue as to why it works, but I've done this 3 times now just to verify, and each time it has worked. For some reason, the USB connection to the handset acts as a precursor to the phone booting. I will stress that without plugging in the USB, my phone did not boot into recovery mode. However, after I did plug it in...Fastbooted....Reset....and Booted into Recovery it worked perfectly.
I am still suffering lags on my device (more so than before) and this could be a product of my stupidity, or this rom being laggy. Either way it works, and I don't have to purchase a new phone!!!

Mod. edit: not dev related, moved to general

I experienced the same problem which can not boot recovery.
I've tried your way above but no luck.
Is there another way?
HTC MAGIC MY TOUCH
SAPPHIRE PVT 32B ENG S-OFF H
radio-2_22_23_02
cm-5.0.7-DS-signed

T-Mobile myTouch 3G - stuck on splash
Today I probably flashed my phone with a wrong (32A) SPL. I can't access fastboot, recovery mode or anything, including access from PC (either Linux or Window$). But it's stuck on splash - if it was totally bricked, would it still load a splash screen? Is there any hope?

Sigh.. I have the same problem.. Blue LED If I hold down the track ball but can't get to fastboot or recovery..
My problem started after I flash the HTC rom from the website.. Sigh.. I think it was the radio that did it..
Anyone found a way to get around this (w/o jtag)?

I am also experiencing the same problems. Blue LED works, cannot get into fastboot, bootloader, or recovery. It just sits on the opening splash screen.
Any other ideas?

Looks like I will just sell mine as a "bricked" device and hope to salvage a few bucks. Sigh

THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU. I would keep going but you get the point. I downloaded ROM Manager, and I flashed a Cyanogen Nightly ROM from 11-5-2010 and I got nothing but a Green spalsh screen and a reboot cycle. You instructions ROCK!!!

I went crazy and prayed a few times to unbrick my phone. I tried different things and then nothing worked. So I had the phone on for a bit and it restarted twice and then ran. Just let in sit for a while. Give it time. Maybe itll work for u too. goodluck

have a mytouch 3g 1.2 with the old radio and SPL, i acidently bricked it trying to flash the new radio and SPL and now i cant get into recovery or fastboot and the flash screen is frozen, pleassssssee help me get this fixed it has been completel useless for the last week or so

Succesfully unbrick with wiggler Mytouch 3G 1.2
as Ezterry instruction i follow his guide, and build my own JTAG.
My God its working 100%..

awebagar said:
as Ezterry instruction i follow his guide, and build my own JTAG.
My God its working 100%..
Click to expand...
Click to collapse
Can I ship you my bricked device so you can practice unbricking? I can pay you in random electronics

Unable to flash with RUU

I did all the steps to root the phone, 1 and 2, but got stuck in a bootloop. The sprint log stuff would come up, the the 4g, then back to sprint etc. I flashed the PC36IMG.zip of the shipped version, but now I can't get the RUU to take the phone into a fully factory state. It starts, then gets stuck waiting for bootloader with a black screen and htc on it. I really just want to make it factory again and start over with the root process. Any ideas?

Hold power and volume when turning on phone, then select fastboot and have the selection for bootloader highlighted, then start the RUU it should work then.

OK, so I tried the volume down + power btn deal, but still no dice. I really don't undestand wtf happened, cause before doing the 2nd part of root, I was able to load Damage ROM, now anything I load besides the PC36IMG.zip from part 1 just bootloops. Crazy

control_logic said:
I did all the steps to root the phone, 1 and 2, but got stuck in a bootloop. The sprint log stuff would come up, the the 4g, then back to sprint etc. I flashed the PC36IMG.zip of the shipped version, but now I can't get the RUU to take the phone into a fully factory state. It starts, then gets stuck waiting for bootloader with a black screen and htc on it. I really just want to make it factory again and start over with the root process. Any ideas?
Click to expand...
Click to collapse
ive seen this answered in the RUU threads. they mentioned the RUU doesn't automatically reboot the phone into the correct mode, i think it was bootloader? manually booting it into the correct mode, then connecting the USB, resolved the issue.
you might want to search/reference the RUU threads for more details as i never had the issue and am only recalling off the top of my head what ive read, which cant be 100% accurate!

When RUU stops/freezes and your phone has the black screen with "HTC" on it.... do not restart your phone or anything leave it the way it is. What you do is exit out of the RUU program by clicking "exit" when it freezes up. Then without doing anything to the phone, just restart the RUU program and it should pick up where it left off and complete the process. I found this fix in "Q and A" part of the Evo forum and it worked for me.
Sent from my PC36100 using Tapatalk

You need to format the phone rest and format cashe then install the rooted image and it will boot. I had the same problem.

Thanks for the responses, it is working again, YEAH!

Is my HTC Magic totally bricked?

I bought a Rogers HTC Magic for a pretty cheap price. It had The Rogers 1.5 Sense UI update on it. I decided I wanted to root it and load other ROMs, etc. So I read that the easiest method was to use Universal Androot to root it, and ROM Manager (from the Market) to flash the appropriate recovery image.
So, I installed both apps. I first ran Universal Androot and rooted. I confirmed root through ADB and also Super User permissions. I then restarted the phone just for peace of mind. After the restart, I ran ROM Manager. It automatically popped up and asked me if I was running an Ion/My Touch or an HTC Magic. I selected HTC Magic, because that's what this is. So then it flashed the recovery image and restarted the phone. When it restarted it went to the Rogers boot screen for a few seconds, and then started a loop of restarts. That's all it does now. It shows the Rogers screen for a few seconds, goes black and reboots over and over. I have tried booting into HBOOT, Fastboot, and into recovery. I cannot boot into any of them. One thing I did notice is that when I'm pressing any of the combinations (volume down + power, home + power, menu + power) for a very brief half a second right before the phone restarts, the bottom of the screen says "ClockwordMod ..." where ... is the version of the image (I'm at work without the phone, so I don't recall the exact number there).
So, is this thing officially a paperweight now, or is there some sort of hope?
Thanks.
Paul

Well, I don't know if you are full-bricked but here is what went wrong. The HTC Magic recovery is incorrect for the mytouch3g (at least the 32b). There was a top option for "saphire/mytouch 3g" which is what you should have chosen. So, you can't load the incompatible recovery. Can't you boot back into the rom you were using? The recovery flash shouldn't have messed with it. If you can, boot back in and flash the correct mytouch3g recovery in rom manager.

adrift02 said:
Well, I don't know if you are full-bricked but here is what went wrong. The HTC Magic recovery is incorrect for the mytouch3g (at least the 32b). There was a top option for "saphire/mytouch 3g" which is what you should have chosen. So, you can't load the incompatible recovery. Can't you boot back into the rom you were using? The recovery flash shouldn't have messed with it. If you can, boot back in and flash the correct mytouch3g recovery in rom manager.
Click to expand...
Click to collapse
Okay. That's weird. I mean, my phone is a Magic so choosing the option for the Magic instead of the Ion/MyTouch seemed to make sense.
Anyway, I cannot get anywhere. Holding vol+ and power does nothing, neither does home and power or back and power. Are there any other tricks to getting anywhere beyond this endless restart loop?
Thanks.

Starting to think I'm screwed.

PaulieORF said:
Starting to think I'm screwed.
Click to expand...
Click to collapse
You may be, I'm not sure exactly what state you are in but the recovery you installed was for a magic 32a (that you have) with a 3.x radio (that you don't have)
The rogers sense rom uses the 6.x hero radio and needs a hero recovery.
The mt3g uses a 2.x radio thus yet another recovery.
Try booting with volume down to see if you can get into the hboot/fastboot screen, but I think you tried this already.. you may also try letting it loop unplugged until the battery drains it may error out giving you access again..
Besides that there is the option of jtag and fixing the software stack that way.

ezterry said:
You may be, I'm not sure exactly what state you are in but the recovery you installed was for a magic 32a (that you have) with a 3.x radio (that you don't have)
The rogers sense rom uses the 6.x hero radio and needs a hero recovery.
The mt3g uses a 2.x radio thus yet another recovery.
Try booting with volume down to see if you can get into the hboot/fastboot screen, but I think you tried this already.. you may also try letting it loop unplugged until the battery drains it may error out giving you access again..
Besides that there is the option of jtag and fixing the software stack that way.
Click to expand...
Click to collapse
Thanks for the reply!
Right, I cannot get into fastboot or hboot. I'll try running the battery down when I get home today. Interesting idea.

Unfortunately running the battery dead with restarts didn't do the trick.
Any idea if there's any place I can send it to who has the smarts to jtag recover this thing?
Thanks.

me too
I did the same thing on a 32B. Rooted. loaded ROM Manager. Ran the recovery, I choose the Ion/MT3G option. tried to load CM6-FroyoRedux-v1.7-32b-blk.zip. Now it's stuck in the boot screen.

tmokeith said:
I did the same thing on a 32B. Rooted. loaded ROM Manager. Ran the recovery, I choose the Ion/MT3G option. tried to load CM6-FroyoRedux-v1.7-32b-blk.zip. Now it's stuck in the boot screen.
Click to expand...
Click to collapse
I don't think it's the same thing.
I rooted, loaded ROM Manager and installed the recovery. I was never even able to get into recovery in order to try to load any ROMs.

I have a Rogers magic, and its a 32a. One way to fix it is to go to the HTC website and punch in your serial number and download the rogers update. Only problem is that will make it a pain to root again. But should fix that reboot loop. But do that as a last resort to get the phone running again.
Sent from my HTC Magic using XDA App

nate_benji said:
I have a Rogers magic, and its a 32a. One way to fix it is to go to the HTC website and punch in your serial number and download the rogers update. Only problem is that will make it a pain to root again. But should fix that reboot loop. But do that as a last resort to get the phone running again.
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
The phone does not identify itself to the computer, so this doesn't work.

The program should try to put the phone into fastboot mode, and install the upgrade. Have you tried pulling the battery and pressing the power button + back, once the battery is installed again?
Sent from my HTC Magic using XDA App

nate_benji said:
The program should try to put the phone into fastboot mode, and install the upgrade. Have you tried pulling the battery and pressing the power button + back, once the battery is installed again?
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
Oh yes. I've gone crazy trying every key combination with every combination of taking battery out, plugging it in, USB cable attached, detached, etc.
The phone never identifies itself as a piece of hardware to the computer in the 5 seconds between reboots.

I had the same problem yesterday, and i was doing the same rooting with Universal Androot and flashing recovery witch Rom Manager (choose the same options). I tried to go into recovery and then it started to bootlooping the whole time.
I was pretty scared when that happens, can't open fastboot menu and the only thing that my phone was showing was HTC logo and a quick blink of clockwork sign over and over.
I don't know exactly how i managed to fix it, but it started to work when i quickly plug off baterry and i immiediatly plug it in (I was doing it at the exactly time when the phone reboots) while holding the power button.
Now my magic turns on, but recovery won't work (just flash for a moment, and reboots) and it always say at the beginning of booting system that SD card was removed which means i can't use any SD card.
I hope it somehow helped you.

naparstekk said:
I had the same problem yesterday, and i was doing the same rooting with Universal Androot and flashing recovery witch Rom Manager (choose the same options). I tried to go into recovery and then it started to bootlooping the whole time.
I was pretty scared when that happens, can't open fastboot menu and the only thing that my phone was showing was HTC logo and a quick blink of clockwork sign over and over.
I don't know exactly how i managed to fix it, but it started to work when i quickly plug off baterry and i immiediatly plug it in (I was doing it at the exactly time when the phone reboots) while holding the power button.
Now my magic turns on, but recovery won't work (just flash for a moment, and reboots) and it always say at the beginning of booting system that SD card was removed which means i can't use any SD card.
I hope it somehow helped you.
Click to expand...
Click to collapse
I tried doing this quickly for about 5 minutes this morning but didn't get it to go anyway. I can try some more after work today.
When you say it booted after this battery pull thing, do you mean the phone booted right into Android, or you were able to get to hboot or fastboot?
Thanks.

PaulieORF said:
I tried doing this quickly for about 5 minutes this morning but didn't get it to go anyway. I can try some more after work today.
When you say it booted after this battery pull thing, do you mean the phone booted right into Android, or you were able to get to hboot or fastboot?
Thanks.
Click to expand...
Click to collapse
I wasn't able to get hboot or fastboot. I pluged off and on the battery in the exact moment when the Logo came out after restarting. The logo was on the screen for the whole time, even while battery plugged off. I guess, i've done it so quickly that phone didn't switched off.
I think i was holding the power+home or power+back buttons all the time.
Can't really rember the exact way, sorry.

PaulieORF said:
I tried doing this quickly for about 5 minutes this morning but didn't get it to go anyway. I can try some more after work today.
When you say it booted after this battery pull thing, do you mean the phone booted right into Android, or you were able to get to hboot or fastboot?
Thanks.
Click to expand...
Click to collapse
Try removing the SD card and booting if its not restarting due to the wrong radio too soon that may help.. if you get into android restore the SD card and run the exploid process I posted a bit back for rogers magics, or the older goldcard method.

I've played around with taking the battery out and putting it right back in at all different times during the booting and can't get the phone to behave any differently. Iv'e tried it with SD card in and SD card out, USB cable in and USB cable out. I can't get anywhere.
I did notice that the phone does show up as an Android device for a second when it's booting. Tried to catch it in adb but no luck.
Starting to think this thing is shot. Any other ideas?

Just so everyone can see what's happening, I recorded a video and uploaded it. Linked below:
http://www.youtube.com/watch?v=hPoxMzm0MVU&hd=1

try to hold and KEEP holding the back + power... Not volume down!
Don't push and release like you did in the video.