Database Users

How I un-bricked my bricked phone.

A few days ago I bricked my phone. I performed a SPL flash which seemed to go ok, the phone rebooted and then just stuck at the first splash screen. I waited for 30 minutes and it was still there.
I then removed the battery, reinserted it, and tried booting into recovery mode. Nothing happened, it just stuck at the first splash screen.
So I removed the battery again, reinserted it, and tried booting into fastboot mode. Nothing happened, it just stuck at the first splash screen.
I repeated these steps a few times with the same result.
I tried booting it with the USB cable attached, the result was the same, and Windows showed the phone as an 'unrecognized device'.
At this point, I was nearly crying, my phone was a brick.
Then, for some reason I tried the following:
-On the PC, i ran the command 'fastboot boot recoveryimage.img'.
-At this point the command says 'waiting for device' (or something like that).
-I removed the battery.
-I Connected USB.
-I inserted the battery.
-I booted the phone while holding the HOME key.
-The phone still froze at the first splash screen, but then suddenly, the waiting fastboot command detected the phone and booted the recovery image! Yay!
That's it. I didn't test it any more thoroughly for obvious reasons, I just reflashed the SPL and everything was back to normal.
I hope this helps someone in the future....

Very nice..

wow seriously, didnt expected that..
good job mate!
btw wat did u do to cause the brick?

Just read the very first line of his post...
marcdbl said:
A few days ago I bricked my phone. I performed a SPL flash which seemed to go ok, the phone rebooted and then just stuck at the first splash screen. I waited for 30 minutes and it was still there.
[...]
Click to expand...
Click to collapse

mgear356 said:
btw wat did u do to cause the brick
Click to expand...
Click to collapse
As I said above, I had been flashing the SPL, and when I rebooted following the flash it was bricked (stuck at first splash screen).
It's weird, because once I managed to get back into fastboot, I simply flashed the same SPL again and it worked fine.

thats not really unbricking your phone. gotta be bricked meaning it wont even go to the splashscreen. and there is no way to unbrick it at that point. Still for those that end up in same situation as you this might help indeed.

goa200 said:
thats not really unbricking your phone. gotta be bricked meaning it wont even go to the splashscreen. and there is no way to unbrick it at that point. Still for those that end up in same situation as you this might help indeed.
Click to expand...
Click to collapse
Never seen someone say the splash screen isn't coming up without blaming the hardware. I didn't think that flashing the wrong SPL would case the splash to not come up. I bricked my first phone by stupidly flashing the wrong SPL first before loading an OS. I thought the whole point of using the word 'brick' was when referring to the phone failing to enter 'fastboot' and 'recovery mode'. At that point, the phone would technically be a 'brick'. This has to be the first post I've seen with a possible fix but I could be wrong since I gave up on fixing that phone awhile ago.

goa200 said:
thats not really unbricking your phone. gotta be bricked meaning it wont even go to the splashscreen. and there is no way to unbrick it at that point. Still for those that end up in same situation as you this might help indeed.
Click to expand...
Click to collapse
bricking means you can't get to fastboot or recovery no matter what you do.
so he counts as bricking.

this might be a fix for the haykuro spl bricked users..

Well done if we have HTC G1 user with brick phone who want to try this methode and give feedback

goa200 said:
thats not really unbricking your phone. gotta be bricked meaning it wont even go to the splashscreen. and there is no way to unbrick it at that point. Still for those that end up in same situation as you this might help indeed.
Click to expand...
Click to collapse
No, You can still get to your splashscreen when the phone is bricked, If you cant turn on the phone then thats called the phone is dead not bricked. As stated already if you can't fastboot, or get to recovery then thats a brick.

Just tried it does not work and I was flash the death spl from haykuro,I am getting a new one but wanted to see if this works and I did not think it would which it didnt.

imfloflo said:
Well done if we have HTC G1 user with brick phone who want to try this methode and give feedback
Click to expand...
Click to collapse
Posted the fix on the android community forums. I have none person in mind, bricked it applying a spl, but he hasn't relied yet. Keep you informed if he does.

Did you reflash ROM after applying spl..? If you did and it still didn't boot then that should most likely be a brick. Can you boot into recovery right now and tell us your SPL version and radio?

goa200 said:
thats not really unbricking your phone. gotta be bricked meaning it wont even go to the splashscreen. and there is no way to unbrick it at that point. Still for those that end up in same situation as you this might help indeed.
Click to expand...
Click to collapse
Yes bricking your phone is when it wont even turn on! In the case of the sapphire when you hold power the led will flsh red quickly once then nothing.
On the blackstone you dont even get the pleasure of the led flash if your phone will turn on there is a way to get it fixed.
When ive been stuck on the bootscreen i have managed to revert using sappimg.nbh (which is 32b in my case) dunno where i got it from but i have it!
sappimg.zip (which is 32A) i got from Amon_RA's post and also have that, ive managed to revert back with both images after being stuck on "red screen of death"

A bit of a personal opinion here:
"Dead" is when the phone doesn't respond to anything, at all.
The charging light does not come on, the power button does nothing, and there is not so much as a flicker in the screen. Also, it is completely inaccessible for hardware debugging (JTAG, serial, USB or otherwise). This usually happens from a hardware problem, or doing something stupid like zero'ing the IPL.
Examples:
- My brother dropped his Nokia N75 in water. It's dead.
- I dropped my Cingular 8125 (HTC Wizard) on the ground. It doesn't power on any more, and plugging it into the charger does nothing. Voltmeter shows a charge running through some areas of the device's motherboard once disassembled. It's dead.
Solutions: Replace, recycle or sell for parts.
"Bricked" is when a purely software problem causes the device to no longer respond.
This may happen on many levels, but usually results in the OS not booting, or booting and being completely unusable (e.g. stopped with kernel panic at OS splash). It may light up and/or show a splash screen, but it fails to enter the bootloader or recovery menus. Its recoverability may vary, but will usually involve a debugging tool and a computer, and likely a copmlete wipe of everything on the device. Even if it's heavily bricked, if it can be recovered via JTAG or similar, it's not "dead".
Examples:
- HTC Dream only goes as far as splash screen, and freezes there. Does not respond to ADB. Does not enter recovery, or bootloader, however fastboot responds.
- HTC Dream shows blank screen, but lights up as if it were powering on. Fastboot does not respond. I connect my HTC ExtUSB Serial dongle to it though, and I'm able to get a response to some commands.
- Western Digital MyBook World Edition NAS powers on, and spins up hard drive, but does not go any farther than that. Front lights do not light up, and no hard disk activity is heard. Networking is not yet enabled. Hard drive can, however, manually be connected to a PC with SATA, and the firmware image re-written to its partitions.
- XBOX (the original) was softmodded, but the dashboard.xbe (the OS shell) was overwritten. It now just stays at the Microsoft logo.
- iPhone was recently jailbroken and SIM unlocked, then Apple pushed an update on me, and my iPhone is in a state where it doesn't enter DFU/Recovery, and when it boots, it says "Emergency calls only."
Solutions: Be very careful not to further brick the device, but use any methods available. Be sure to check documentations, search forums, and then ask questions if unsure. Make sure you finish every process you start.
After this, might just be hardware "damage" (like a power button not working right) or software "errors", like the home screen failing to load because of "Process com.google.android.gapps quit unexpectedly." These are usually relatively easy to fix, or have fixed.
Again, this is just an opinion.
Back on topic though, I seriously wouldn't have probably thought of using fastboot while it's stuck at the G1 screen, unless mine were bricked. Kudos to you, and I hope this works on some other bricked G1's out there (At least ones with the Engineering/Hard/DangerSPL, the stock SPL doesn't support fastboot as far as I know.)

bonesy said:
Yes bricking your phone is when it wont even turn on! In the case of the sapphire when you hold power the led will flsh red quickly once then nothing.
On the blackstone you dont even get the pleasure of the led flash if your phone will turn on there is a way to get it fixed.
When ive been stuck on the bootscreen i have managed to revert using sappimg.nbh (which is 32b in my case) dunno where i got it from but i have it!
sappimg.zip (which is 32A) i got from Amon_RA's post and also have that, ive managed to revert back with both images after being stuck on "red screen of death"
Click to expand...
Click to collapse
Won't agree with that, what you describe as a brick is a DEAD mobile. A brick is a useless piece which wont get into any state of recovery. The only thing i will agree with is that if it'll turn on there is a way to get it fixed that's why we even got the word unbricking which is done with many other pieces than Android mobiles.
Hope this will get us closer to a unbricking method which works on all the BRICKED pieces out there.
Good job dude!

Yes, my phone is back!
I bricked my G1 about 2 months ago pretty much the same way marcdbl did.
I gave up on it and sit it aside getting a new MT3G.
Sweet, now I got 2 phones to play with.
Thank You marcdbl

wow sweet news
fishman0919 said:
Yes, my phone is back!
I bricked my G1 about 2 months ago pretty much the same way marcdbl did.
I gave up on it and sit it aside getting a new MT3G.
Sweet, now I got 2 phones to play with.
Thank You marcdbl
Click to expand...
Click to collapse
Very glad to hear that your dead or bricked or whatever-you-may-call phone is back to LIVE!!!
So I think this solution works for some certain people. So i think rather than arguing on terminology, better spread this good trick to people who had dead/bricked/whatevery-you-may-call phone. IMHO
Thanks for the solution.
Best,
Thihaz

marcdbl said:
A few days ago I bricked my phone. I performed a SPL flash which seemed to go ok, the phone rebooted and then just stuck at the first splash screen. I waited for 30 minutes and it was still there.
I then removed the battery, reinserted it, and tried booting into recovery mode. Nothing happened, it just stuck at the first splash screen.
So I removed the battery again, reinserted it, and tried booting into fastboot mode. Nothing happened, it just stuck at the first splash screen.
I repeated these steps a few times with the same result.
I tried booting it with the USB cable attached, the result was the same, and Windows showed the phone as an 'unrecognized device'.
At this point, I was nearly crying, my phone was a brick.
Then, for some reason I tried the following:
-On the PC, i ran the command 'fastboot boot recoveryimage.img'.
-At this point the command says 'waiting for device' (or something like that).
-I removed the battery.
-I Connected USB.
-I inserted the battery.
-I booted the phone while holding the HOME key.
-The phone still froze at the first splash screen, but then suddenly, the waiting fastboot command detected the phone and booted the recovery image! Yay!
That's it. I didn't test it any more thoroughly for obvious reasons, I just reflashed the SPL and everything was back to normal.
I hope this helps someone in the future....
Click to expand...
Click to collapse
where were you 2 months ago dude? I paid 270€ to change the board on my magic
Good Job! Thanks for the info

stuck at splash screen, have tried all the solutions.

Hello, I am having some issues and I've tried all of the fixes on several different forums including this one.
I wanted to root my phone so I followed Amon's guide and successfully went from the Tmobile released 1.6 to the rooted 1.5 in the guide. I then wanted to update to the rooted 1.6 but was having issues with trying to install the update. While in the safe mood I asked it to extract update.zip about 3 times before it finally opened it and it extracted everything really quickly!
I then tried to reboot the phone but it stayed at the green MyTouch 3G splash screen without going anywhere. I've tried all the tricks of taking out my battery, unplugging the USB, any form of combination I could.
I'm told my phone isn't bricked, only stuck but my computer isn't picking up the phone either. It doesn't say it can't read the USB device and fastboot still says waiting for devices.
Can some one please help me with my problem?
Thank you,

Difinitus said:
Hello, I am having some issues and I've tried all of the fixes on several different forums including this one.
I wanted to root my phone so I followed Amon's guide and successfully went from the Tmobile released 1.6 to the rooted 1.5 in the guide. I then wanted to update to the rooted 1.6 but was having issues with trying to install the update. While in the safe mood I asked it to extract update.zip about 3 times before it finally opened it and it extracted everything really quickly!
I then tried to reboot the phone but it stayed at the green MyTouch 3G splash screen without going anywhere. I've tried all the tricks of taking out my battery, unplugging the USB, any form of combination I could.
I'm told my phone isn't bricked, only stuck but my computer isn't picking up the phone either. It doesn't say it can't read the USB device and fastboot still says waiting for devices.
Can some one please help me with my problem?
Thank you,
Click to expand...
Click to collapse
What do you mean by safe mode? Which donut ROM are you trying to flash? Which recovery image do you have? How long was it stuck on the splash screen. You need to give more details for us to be able to help out. What radio and spl do you have?

I meant safe mode by where you select the option to extract update.zip.
I was trying to flash Amon's 1.6 32A Rom. Even though my phone states 32B I followed his instructions on how to Root the Mytouch and he was using 32A stuff so I figured if it worked OK, I was now running on 32A instead of 32B.
I was using RAv1.2.0H.img from his original guide. I dont know what radio and spl I have. There wasn't really a guide on updating ROMs so I just tried the same basic steps.
I hope this is more helpful, I am doing my best to learn everything, I am still fairly new to modding a phone. (my last phone was a Blackberry 8100).

Difinitus said:
I meant safe mode by where you select the option to extract update.zip.
I was trying to flash Amon's 1.6 32A Rom. Even though my phone states 32B I followed his instructions on how to Root the Mytouch and he was using 32A stuff so I figured if it worked OK, I was now running on 32A instead of 32B.
I was using RAv1.2.0H.img from his original guide. I dont know what radio and spl I have. There wasn't really a guide on updating ROMs so I just tried the same basic steps.
I hope this is more helpful, I am doing my best to learn everything, I am still fairly new to modding a phone. (my last phone was a Blackberry 8100).
Click to expand...
Click to collapse
I'm not sure what you mean by extract update.zip. I think you are talking about fastboot there. Have you tried to flash the rom in the recovery image? you know, by pressing power and home to get to the recovery, then flashing it through there. go into fastboot by pressing power and back and it will tell you what radio and spl you have. once you have that, write that so we can further get a grasp as to your problem. if in fact you still have the 32A configuration, you might want to flash over the 32B radio and and try to flash a 32B rom.

That is my problem, I can't get past the "MyTouch 3G" green screen. I've tried the Home button, Back button, Vol Down button and holding them for several minutes with no result, it stays at the very first screen when it turns on.
I've tried flashbooting from adb but it says "waiting for devices" and my computer isn't picking up any kind of device.

I'm having the exact same problem except im stuck on the vodafone screen. I also tried flashboot form adb but "waiting for devices" is shown and pc wont detect the device.

Did this before.
If you can get into recovery mode, Hold Home button while powering on, you can restore a nandroid backup, if you took one, or put the sappimg.nbh file or the correct items to flash whatever rom.
I had a stock 1.5 Mytouch. I wanted to root and get the 1.6 version of cyanogen, forgot to flash the HTC_ADP_1.6_DRC83_rooted_base as part of the process and had got stuck in the neverending mytouch logo.
If you can get into recovery:
wipe, then put the update.zip files directly on the card.(use a SD adapter, ...)
Choose apply any update from SD
Choose the base files, then the rom if its a newer version
Once those two updates run, reboot the phone.
My never ending logo disappeared, and the phone booted. Newb mistake on my part.
Wait at least a minute or two once this is done.

since the phone is stuck on the original logo and isnt responding to buttons when loading up... do we manually remove and reinsert the battery while holding the home button?

I have tried getting into recovery mode, but it doesn't do anything past the splash screen. Holding the home button while trying to power on the device won't do much.

hey difinitus keep me updated if u somehow get it to work

Even when you take the battery out for a significant time it turns on immediately to the logo screen. Whats the longest you have left the phone sitting at the logo screen.

A small thought, since it was trying to load a rom you had on your memory card, try taking the battery out, and removing the memory card, and then turn it on and wait a bit and see if you get a different result. Its a thought.
If that doesnt work put the memory card back in and turn it on and once its on remove the memory card.
Perhaps the rom on your memory card is corrupt and it is unable to continue to load it, you could even try putting the rom on again using your memory card reader and your computer, thus erasing the existing one.

try plug usb in to phone
take battery out
prees and hold home button
re-insert battery while still holding button
let go after about 3-5 sec

have you tried getting into fastboot by holding back and powering on the phone once you took out the battery? cuz fastboot doesn't initialize after the splash screen, it just pops up as soon as you hit back and power

@Tech no boy; I have tried using several different update.zip and a .nbh and also tried reformatting.
@sitimber; have tried that before, the splash screen still pops up. It just vibrates once and goes to the logo, with any combination of buttons and steps.
@tazz9690; Yes, no matter what I do it still goes to the splash screen. I've been saying that for several posts now.

you might have a bricked phone then. call up t-mobile and get it returned under warranty. if you are 100% positive that you will not be able to get past your splash screen, then the return center will not be able to prove that you have modded your phone, and they will send you another phone.

you might have a bricked phone then. call up t-mobile and get it returned under warranty. if you are 100% positive that you will not be able to get past your splash screen, then the return center will not be able to prove that you have modded your phone, and they will send you another phone.

Is my HTC Magic totally bricked?

I bought a Rogers HTC Magic for a pretty cheap price. It had The Rogers 1.5 Sense UI update on it. I decided I wanted to root it and load other ROMs, etc. So I read that the easiest method was to use Universal Androot to root it, and ROM Manager (from the Market) to flash the appropriate recovery image.
So, I installed both apps. I first ran Universal Androot and rooted. I confirmed root through ADB and also Super User permissions. I then restarted the phone just for peace of mind. After the restart, I ran ROM Manager. It automatically popped up and asked me if I was running an Ion/My Touch or an HTC Magic. I selected HTC Magic, because that's what this is. So then it flashed the recovery image and restarted the phone. When it restarted it went to the Rogers boot screen for a few seconds, and then started a loop of restarts. That's all it does now. It shows the Rogers screen for a few seconds, goes black and reboots over and over. I have tried booting into HBOOT, Fastboot, and into recovery. I cannot boot into any of them. One thing I did notice is that when I'm pressing any of the combinations (volume down + power, home + power, menu + power) for a very brief half a second right before the phone restarts, the bottom of the screen says "ClockwordMod ..." where ... is the version of the image (I'm at work without the phone, so I don't recall the exact number there).
So, is this thing officially a paperweight now, or is there some sort of hope?
Thanks.
Paul

Well, I don't know if you are full-bricked but here is what went wrong. The HTC Magic recovery is incorrect for the mytouch3g (at least the 32b). There was a top option for "saphire/mytouch 3g" which is what you should have chosen. So, you can't load the incompatible recovery. Can't you boot back into the rom you were using? The recovery flash shouldn't have messed with it. If you can, boot back in and flash the correct mytouch3g recovery in rom manager.

adrift02 said:
Well, I don't know if you are full-bricked but here is what went wrong. The HTC Magic recovery is incorrect for the mytouch3g (at least the 32b). There was a top option for "saphire/mytouch 3g" which is what you should have chosen. So, you can't load the incompatible recovery. Can't you boot back into the rom you were using? The recovery flash shouldn't have messed with it. If you can, boot back in and flash the correct mytouch3g recovery in rom manager.
Click to expand...
Click to collapse
Okay. That's weird. I mean, my phone is a Magic so choosing the option for the Magic instead of the Ion/MyTouch seemed to make sense.
Anyway, I cannot get anywhere. Holding vol+ and power does nothing, neither does home and power or back and power. Are there any other tricks to getting anywhere beyond this endless restart loop?
Thanks.

Starting to think I'm screwed.

PaulieORF said:
Starting to think I'm screwed.
Click to expand...
Click to collapse
You may be, I'm not sure exactly what state you are in but the recovery you installed was for a magic 32a (that you have) with a 3.x radio (that you don't have)
The rogers sense rom uses the 6.x hero radio and needs a hero recovery.
The mt3g uses a 2.x radio thus yet another recovery.
Try booting with volume down to see if you can get into the hboot/fastboot screen, but I think you tried this already.. you may also try letting it loop unplugged until the battery drains it may error out giving you access again..
Besides that there is the option of jtag and fixing the software stack that way.

ezterry said:
You may be, I'm not sure exactly what state you are in but the recovery you installed was for a magic 32a (that you have) with a 3.x radio (that you don't have)
The rogers sense rom uses the 6.x hero radio and needs a hero recovery.
The mt3g uses a 2.x radio thus yet another recovery.
Try booting with volume down to see if you can get into the hboot/fastboot screen, but I think you tried this already.. you may also try letting it loop unplugged until the battery drains it may error out giving you access again..
Besides that there is the option of jtag and fixing the software stack that way.
Click to expand...
Click to collapse
Thanks for the reply!
Right, I cannot get into fastboot or hboot. I'll try running the battery down when I get home today. Interesting idea.

Unfortunately running the battery dead with restarts didn't do the trick.
Any idea if there's any place I can send it to who has the smarts to jtag recover this thing?
Thanks.

me too
I did the same thing on a 32B. Rooted. loaded ROM Manager. Ran the recovery, I choose the Ion/MT3G option. tried to load CM6-FroyoRedux-v1.7-32b-blk.zip. Now it's stuck in the boot screen.

tmokeith said:
I did the same thing on a 32B. Rooted. loaded ROM Manager. Ran the recovery, I choose the Ion/MT3G option. tried to load CM6-FroyoRedux-v1.7-32b-blk.zip. Now it's stuck in the boot screen.
Click to expand...
Click to collapse
I don't think it's the same thing.
I rooted, loaded ROM Manager and installed the recovery. I was never even able to get into recovery in order to try to load any ROMs.

I have a Rogers magic, and its a 32a. One way to fix it is to go to the HTC website and punch in your serial number and download the rogers update. Only problem is that will make it a pain to root again. But should fix that reboot loop. But do that as a last resort to get the phone running again.
Sent from my HTC Magic using XDA App

nate_benji said:
I have a Rogers magic, and its a 32a. One way to fix it is to go to the HTC website and punch in your serial number and download the rogers update. Only problem is that will make it a pain to root again. But should fix that reboot loop. But do that as a last resort to get the phone running again.
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
The phone does not identify itself to the computer, so this doesn't work.

The program should try to put the phone into fastboot mode, and install the upgrade. Have you tried pulling the battery and pressing the power button + back, once the battery is installed again?
Sent from my HTC Magic using XDA App

nate_benji said:
The program should try to put the phone into fastboot mode, and install the upgrade. Have you tried pulling the battery and pressing the power button + back, once the battery is installed again?
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
Oh yes. I've gone crazy trying every key combination with every combination of taking battery out, plugging it in, USB cable attached, detached, etc.
The phone never identifies itself as a piece of hardware to the computer in the 5 seconds between reboots.

I had the same problem yesterday, and i was doing the same rooting with Universal Androot and flashing recovery witch Rom Manager (choose the same options). I tried to go into recovery and then it started to bootlooping the whole time.
I was pretty scared when that happens, can't open fastboot menu and the only thing that my phone was showing was HTC logo and a quick blink of clockwork sign over and over.
I don't know exactly how i managed to fix it, but it started to work when i quickly plug off baterry and i immiediatly plug it in (I was doing it at the exactly time when the phone reboots) while holding the power button.
Now my magic turns on, but recovery won't work (just flash for a moment, and reboots) and it always say at the beginning of booting system that SD card was removed which means i can't use any SD card.
I hope it somehow helped you.

naparstekk said:
I had the same problem yesterday, and i was doing the same rooting with Universal Androot and flashing recovery witch Rom Manager (choose the same options). I tried to go into recovery and then it started to bootlooping the whole time.
I was pretty scared when that happens, can't open fastboot menu and the only thing that my phone was showing was HTC logo and a quick blink of clockwork sign over and over.
I don't know exactly how i managed to fix it, but it started to work when i quickly plug off baterry and i immiediatly plug it in (I was doing it at the exactly time when the phone reboots) while holding the power button.
Now my magic turns on, but recovery won't work (just flash for a moment, and reboots) and it always say at the beginning of booting system that SD card was removed which means i can't use any SD card.
I hope it somehow helped you.
Click to expand...
Click to collapse
I tried doing this quickly for about 5 minutes this morning but didn't get it to go anyway. I can try some more after work today.
When you say it booted after this battery pull thing, do you mean the phone booted right into Android, or you were able to get to hboot or fastboot?
Thanks.

PaulieORF said:
I tried doing this quickly for about 5 minutes this morning but didn't get it to go anyway. I can try some more after work today.
When you say it booted after this battery pull thing, do you mean the phone booted right into Android, or you were able to get to hboot or fastboot?
Thanks.
Click to expand...
Click to collapse
I wasn't able to get hboot or fastboot. I pluged off and on the battery in the exact moment when the Logo came out after restarting. The logo was on the screen for the whole time, even while battery plugged off. I guess, i've done it so quickly that phone didn't switched off.
I think i was holding the power+home or power+back buttons all the time.
Can't really rember the exact way, sorry.

PaulieORF said:
I tried doing this quickly for about 5 minutes this morning but didn't get it to go anyway. I can try some more after work today.
When you say it booted after this battery pull thing, do you mean the phone booted right into Android, or you were able to get to hboot or fastboot?
Thanks.
Click to expand...
Click to collapse
Try removing the SD card and booting if its not restarting due to the wrong radio too soon that may help.. if you get into android restore the SD card and run the exploid process I posted a bit back for rogers magics, or the older goldcard method.

I've played around with taking the battery out and putting it right back in at all different times during the booting and can't get the phone to behave any differently. Iv'e tried it with SD card in and SD card out, USB cable in and USB cable out. I can't get anywhere.
I did notice that the phone does show up as an Android device for a second when it's booting. Tried to catch it in adb but no luck.
Starting to think this thing is shot. Any other ideas?

Just so everyone can see what's happening, I recorded a video and uploaded it. Linked below:
http://www.youtube.com/watch?v=hPoxMzm0MVU&hd=1

try to hold and KEEP holding the back + power... Not volume down!
Don't push and release like you did in the video.

[Q] HTC magic boot loop rooted. Need desperately HELP!!!

Hi there. I would appreciate your help here. I am a rookie with android software as I own an HTC Magic almost 3 weeks from now. My phone has the above characteristics:
SAPPHIRE PVT32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Dec 8 2009, 17:38:48
The software I had was Android 1.5 and it was rooted with RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver ROM. I was watching on Youtube some videos about CyanogenMod 6 at HTC phones and I decided to try to put this software to my phone via ROM Manager. The result is a major disaster (or not?). Specifically, from my phone I opened ROM Manager, download rom, CyanogenMod nightlies , CM6 XXXXXXXX (can’t remember which one) EBI1 Kernel… So I had successfully downloaded it and followed the instructions while installing. After installation completed it automatically rebooted and started loop again and again. All it gets to is the "HTC MAGIC" screen and then reboots every 5 seconds. At the begging I thought that this is the installation process. 30 minutes later I had a doubt for this. I pulled out the battery cause pressing the Power on/off button nothing happened. I tried everything… nothing at all. I pressed the Power on/off button again it continued looping. After I pulled out and inserted the battery I pressed the Home and Power on/off button (Android recovery) it still continued looping. Removed again the battery and inserting again while pressing Back and Power on/off button (fastboot ) it still continued looping. I pressed Home and Back buttons and tapped Power on/off button… the same issue (continued looping). Down volume and Power on/off button… nothing. Up volume and Power on/off button… nada. Pulled out the battery for 30 minutes and tried again… nothing again. Tried again and again with the USB connected and disconnected… nothing. Still looping. I tried to install the previous Rom I had via PC but I couldn’t cause USB was connecting and disconnecting because of the rapid (5 second) boot loop. The only button which seems to work is the trackball which freezes everything with the blue led on and a black screen between the loops. I pressed all the buttons together wishing something to happen… unfortunately nothing happened. I backup my SD card and tried with an older backup I had… nothing… boot loop remains. I am despaired and tired (almost 18 hours online searching some help or solution). The only thing I want is to make fastboot work and install my old ROM via my PC… nothing else.
Please, please, please…. HELP ME!!!

well this is a pain. Your fastboot is also locked. You should read instructions and learn a bit before just flashing whatever you please. CM6 requires old radio and a different SPL. The one you're using isn't compatible, hence the reboots. You also can't get into recovery because your radio and recovery are also not compatible. I'm assuming that rom manager did that? I'm not sure, all you new people are just running that thing and flashing away without any knowledge behind it.
I don't think you're bricked but I'm not 100% sure what to do since I've kept my bootloader unlocked to run fastboot commands (which would easily solve this situation). My suggestion is to get an RUU for your phone, update and then reroot it. Maybe someone else has a better solution but right now you don't have the right recovery and fastboot is locked. At the moment, I can't think of a better solution.
edit: ugh it's late and im sleepy! i just reread what you said, you can't get into fastboot either? If not you're probably bricked

yup, I totally agree: I remember the first time I flashed a rom over the stock version which was installed. I read every sticky thread, the whole wiki page and lots of xda threads before giving flashing a try. It's just too risky to mess up an expensive phone. Just look at all the "bricked my phone, please help" threads, that alone should make one think twice (and read, read, read) before flashing...
I hope someone can still help you. But not getting into fastboot anymore?! :-(
Sorry and good luck,
V.
Sent from my HTC Magic using Tapatalk

Thanks gyes for your replies. Still I can't find a solution. The only thing I can barelly see before it boots again by pressing Back button and On/Off button is ClockworkMod Recovery v2.5.0.1.
As about the mistakes I admit that this is my fault but also I have to say that before I root my HTC I couldn't download anything from ROM Manager. After I had succesfully rooted my phone and downloaded the ROM update from my phone there was no mention about radio issues or conflicts in the installtion proccess. Even though it is my fault and I admit it. I don't mind if I loose my data (I made an SD buck up). I just want to find a way to stop this stuppid loop, make a USB connection with my PC and install my previous ROM even if I have to screw out my phone.

as I'm not able to help you myself (I'm just a user not a developer) I can only recommend checking the "bricked phone" threads for solutions. I think I saw an "how to unbrick phone" thread somewhere. Never read it though. Probably there are many others who messed up their phone somehow and lots of solutions in all those threads. Just use the search feature and look for brick threads, solutions, help, etc. Maybe you'll find something.
Sry that I can't offer more,
Greetz,
V.

It's ok my friend... Thanx 4 replying

i don't know if it's related but a guy had a bad flash and had a blue trackball toom, which you mention in first post, here is his thread on what he did to fix his phone http://forum.xda-developers.com/showthread.php?t=649689&highlight=unbrick

Nope... Nothing helpfull unfortunately! Thanx anyway
A new clue is that I left my HTC magic to boot loop while the usb cable was connected with my PC dinging in and out while rebooting and after 10 minutes it stoped rebooting (it happened one's more yesterday). No button combination is responding (the trackball also) even if I keep pressing them over a minute continuesly. Also no led is lighting even if it is on USB connection. I ashume that if I remove and putt back the battery it will start again the boot loop as it happened yesterday. So I will leave it as it is and try later to restart...

Nothing... Started boot loop again

Today I gave my Magic to HTC Service. It was confirmed that the electronic circuit was "dead" and it had to be replaced. If I'm lucky maybe I wont pay a dime. It depends if the software I had on was Android compadible or not. If not then... better not think about it!

[Q] Nexus one modem seems busted, bricked?

Hi all,
I've bought a Nexus One from a friend that went to US a while ago (I live in Brazil). My N1 was exhibiting an overheating & reboot issue whenever I used the 3g connection.
2 weeks ago, just after a phone call, it rebooted and did not come back. I took the battery out for the night, but still did not come back.
The bootloader is unlocked, but I was using stock gingerbread. I can get into fastboot, but not recovery. I tried the PASSIMG method a couple of times, and tough the flashing did succeed, the phone keeps stuck at the X logo.
The last radio flash was 5.08, when ginger came. Does this means my device is bricked? To make matters worse, it seems I'm out of warranty...any of you guys have any clue to help me? Or is it all lost and I should get a new phone??
Thanks!

If you're booting - you're not bricked. Brick = NOTHING on the phone, no reaction whatsoever to anything, won't turn on.
Anyway, since you have your bootloader unlocked - fastboot flash recovery recovery.img, and then try to boot into recovery, see if it works. Read the Wiki to help yourself.

Hi Jack, thx for the reply!
I already tried that; the flash succeeds, but I cannot get into recovery. If I try to reboot into recovery, it still gets stuck at the X logo.
I understand that brick == nothing at all; but I suspecting that the GSM modem is history. I was already having rebooting problems with it, and now it seems that it's dead and the phone will not boot because of it. Does this makes sense?

Have you tried "fastboot boot recovery.img"?

danger-rat said:
Have you tried "fastboot boot recovery.img"?
Click to expand...
Click to collapse
Just tried it, the phone reboots, but vibrates 7 times and does not boot, still in the X logo...

7 vibrations - means you have some HW problem, and the phone won't boot. Yes, I guess that even though you're not bricked, the phone isn't usable and needs to be fixed/replaced. Sorry.

That was what I was afraid....I had this "7 vibration" stuff happen before, but I was able to get it back on track...
Thx all for the help, time to get a new gadget